static bool checkParallel(skiatest::Reporter* reporter, const SkDQuad& quad1, const SkDQuad& quad2) {
SkDVector sweep[2], tweep[2];
setQuadHullSweep(quad1, sweep);
setQuadHullSweep(quad2, tweep);
// if the ctrl tangents are not nearly parallel, use them
// solve for opposite direction displacement scale factor == m
// initial dir = v1.cross(v2) == v2.x * v1.y - v2.y * v1.x
// displacement of q1[1] : dq1 = { -m * v1.y, m * v1.x } + q1[1]
// straight angle when : v2.x * (dq1.y - q1[0].y) == v2.y * (dq1.x - q1[0].x)
// v2.x * (m * v1.x + v1.y) == v2.y * (-m * v1.y + v1.x)
// - m * (v2.x * v1.x + v2.y * v1.y) == v2.x * v1.y - v2.y * v1.x
// m = (v2.y * v1.x - v2.x * v1.y) / (v2.x * v1.x + v2.y * v1.y)
// m = v1.cross(v2) / v1.dot(v2)
double s0dt0 = sweep[0].dot(tweep[0]);
REPORTER_ASSERT(reporter, s0dt0 != 0);
double s0xt0 = sweep[0].crossCheck(tweep[0]);
double m = s0xt0 / s0dt0;
double sDist = sweep[0].length() * m;
double tDist = tweep[0].length() * m;
bool useS = fabs(sDist) < fabs(tDist);
double mFactor = fabs(useS ? distEndRatio(sDist, quad1) : distEndRatio(tDist, quad2));
if (mFactor < 5000) { // empirically found limit
return s0xt0 < 0;
}
SkDVector m0 = quad1.ptAtT(0.5) - quad1[0];
SkDVector m1 = quad2.ptAtT(0.5) - quad2[0];
return m0.crossCheck(m1) < 0;
}
// returns false if there's more than one intercept or the intercept doesn't match the point
// returns true if the intercept was successfully added or if the
// original quads need to be subdivided
static bool add_intercept(const SkDQuad& q1, const SkDQuad& q2, double tMin, double tMax,
SkIntersections* i, bool* subDivide) {
double tMid = (tMin + tMax) / 2;
SkDPoint mid = q2.ptAtT(tMid);
SkDLine line;
line[0] = line[1] = mid;
SkDVector dxdy = q2.dxdyAtT(tMid);
line[0] -= dxdy;
line[1] += dxdy;
SkIntersections rootTs;
rootTs.allowNear(false);
int roots = rootTs.intersect(q1, line);
if (roots == 0) {
if (subDivide) {
*subDivide = true;
}
return true;
}
if (roots == 2) {
return false;
}
SkDPoint pt2 = q1.ptAtT(rootTs[0][0]);
if (!pt2.approximatelyEqualHalf(mid)) {
return false;
}
i->insertSwap(rootTs[0][0], tMid, pt2);
return true;
}
static void testLineIntersect(skiatest::Reporter* reporter, const SkDQuad& quad,
const SkDLine& line, const double x, const double y) {
char pathStr[1024];
sk_bzero(pathStr, sizeof(pathStr));
char* str = pathStr;
str += sprintf(str, " path.moveTo(%1.9g, %1.9g);\n", quad[0].fX, quad[0].fY);
str += sprintf(str, " path.quadTo(%1.9g, %1.9g, %1.9g, %1.9g);\n", quad[1].fX,
quad[1].fY, quad[2].fX, quad[2].fY);
str += sprintf(str, " path.moveTo(%1.9g, %1.9g);\n", line[0].fX, line[0].fY);
str += sprintf(str, " path.lineTo(%1.9g, %1.9g);\n", line[1].fX, line[1].fY);
SkIntersections intersections;
bool flipped = false;
int result = doIntersect(intersections, quad, line, flipped);
bool found = false;
for (int index = 0; index < result; ++index) {
double quadT = intersections[0][index];
SkDPoint quadXY = quad.ptAtT(quadT);
double lineT = intersections[1][index];
SkDPoint lineXY = line.ptAtT(lineT);
if (quadXY.approximatelyEqual(lineXY)) {
found = true;
}
}
REPORTER_ASSERT(reporter, found);
}
/* returns
-1 if overlaps
0 if no overlap cw
1 if no overlap ccw
*/
static int quadHullsOverlap(skiatest::Reporter* reporter, const SkDQuad& quad1,
const SkDQuad& quad2) {
SkDVector sweep[2], tweep[2];
setQuadHullSweep(quad1, sweep);
setQuadHullSweep(quad2, tweep);
double s0xs1 = sweep[0].crossCheck(sweep[1]);
double s0xt0 = sweep[0].crossCheck(tweep[0]);
double s1xt0 = sweep[1].crossCheck(tweep[0]);
bool tBetweenS = s0xs1 > 0 ? s0xt0 > 0 && s1xt0 < 0 : s0xt0 < 0 && s1xt0 > 0;
double s0xt1 = sweep[0].crossCheck(tweep[1]);
double s1xt1 = sweep[1].crossCheck(tweep[1]);
tBetweenS |= s0xs1 > 0 ? s0xt1 > 0 && s1xt1 < 0 : s0xt1 < 0 && s1xt1 > 0;
double t0xt1 = tweep[0].crossCheck(tweep[1]);
if (tBetweenS) {
return -1;
}
if ((s0xt0 == 0 && s1xt1 == 0) || (s1xt0 == 0 && s0xt1 == 0)) { // s0 to s1 equals t0 to t1
return -1;
}
bool sBetweenT = t0xt1 > 0 ? s0xt0 < 0 && s0xt1 > 0 : s0xt0 > 0 && s0xt1 < 0;
sBetweenT |= t0xt1 > 0 ? s1xt0 < 0 && s1xt1 > 0 : s1xt0 > 0 && s1xt1 < 0;
if (sBetweenT) {
return -1;
}
// if all of the sweeps are in the same half plane, then the order of any pair is enough
if (s0xt0 >= 0 && s0xt1 >= 0 && s1xt0 >= 0 && s1xt1 >= 0) {
return 0;
}
if (s0xt0 <= 0 && s0xt1 <= 0 && s1xt0 <= 0 && s1xt1 <= 0) {
return 1;
}
// if the outside sweeps are greater than 180 degress:
// first assume the inital tangents are the ordering
// if the midpoint direction matches the inital order, that is enough
SkDVector m0 = quad1.ptAtT(0.5) - quad1[0];
SkDVector m1 = quad2.ptAtT(0.5) - quad2[0];
double m0xm1 = m0.crossCheck(m1);
if (s0xt0 > 0 && m0xm1 > 0) {
return 0;
}
if (s0xt0 < 0 && m0xm1 < 0) {
return 1;
}
REPORTER_ASSERT(reporter, s0xt0 != 0);
return checkParallel(reporter, quad1, quad2);
}
void SkGlyphCache::AddQuad(const SkPoint pts[2], SkScalar axis, bool yAxis,
SkGlyph::Intercept* intercept) {
SkDQuad quad;
quad.set(pts);
double roots[2];
int count = yAxis ? quad.verticalIntersect(axis, roots)
: quad.horizontalIntersect(axis, roots);
while (--count >= 0) {
SkPoint pt = quad.ptAtT(roots[count]).asSkPoint();
AddInterval(*(&pt.fX + yAxis), intercept);
}
}
void SkDRect::setBounds(const SkDQuad& quad) {
set(quad[0]);
add(quad[2]);
double tValues[2];
int roots = 0;
if (!between(quad[0].fX, quad[1].fX, quad[2].fX)) {
roots = SkDQuad::FindExtrema(quad[0].fX, quad[1].fX, quad[2].fX, tValues);
}
if (!between(quad[0].fY, quad[1].fY, quad[2].fY)) {
roots += SkDQuad::FindExtrema(quad[0].fY, quad[1].fY, quad[2].fY, &tValues[roots]);
}
for (int x = 0; x < roots; ++x) {
add(quad.ptAtT(tValues[x]));
}
}
DEF_TEST(PathOpsQuadLineIntersection, reporter) {
for (size_t index = 0; index < lineQuadTests_count; ++index) {
int iIndex = static_cast<int>(index);
const QuadPts& q = lineQuadTests[index].quad;
SkDQuad quad;
quad.debugSet(q.fPts);
SkASSERT(ValidQuad(quad));
const SkDLine& line = lineQuadTests[index].line;
SkASSERT(ValidLine(line));
SkReduceOrder reducer1, reducer2;
int order1 = reducer1.reduce(quad);
int order2 = reducer2.reduce(line);
if (order1 < 3) {
SkDebugf("%s [%d] quad order=%d\n", __FUNCTION__, iIndex, order1);
REPORTER_ASSERT(reporter, 0);
}
if (order2 < 2) {
SkDebugf("%s [%d] line order=%d\n", __FUNCTION__, iIndex, order2);
REPORTER_ASSERT(reporter, 0);
}
SkIntersections intersections;
bool flipped = false;
int result = doIntersect(intersections, quad, line, flipped);
REPORTER_ASSERT(reporter, result == lineQuadTests[index].result);
if (intersections.used() <= 0) {
continue;
}
for (int pt = 0; pt < result; ++pt) {
double tt1 = intersections[0][pt];
REPORTER_ASSERT(reporter, tt1 >= 0 && tt1 <= 1);
SkDPoint t1 = quad.ptAtT(tt1);
double tt2 = intersections[1][pt];
REPORTER_ASSERT(reporter, tt2 >= 0 && tt2 <= 1);
SkDPoint t2 = line.ptAtT(tt2);
if (!t1.approximatelyEqual(t2)) {
SkDebugf("%s [%d,%d] x!= t1=%1.9g (%1.9g,%1.9g) t2=%1.9g (%1.9g,%1.9g)\n",
__FUNCTION__, iIndex, pt, tt1, t1.fX, t1.fY, tt2, t2.fX, t2.fY);
REPORTER_ASSERT(reporter, 0);
}
if (!t1.approximatelyEqual(lineQuadTests[index].expected[0])
&& (lineQuadTests[index].result == 1
|| !t1.approximatelyEqual(lineQuadTests[index].expected[1]))) {
SkDebugf("%s t1=(%1.9g,%1.9g)\n", __FUNCTION__, t1.fX, t1.fY);
REPORTER_ASSERT(reporter, 0);
}
}
}
}
static void pointFinder(const SkDQuad& q1, const SkDQuad& q2) {
for (int index = 0; index < 3; ++index) {
double t = q1.nearestT(q2[index]);
SkDPoint onQuad = q1.ptAtT(t);
SkDebugf("%s t=%1.9g (%1.9g,%1.9g) dist=%1.9g\n", __FUNCTION__, t, onQuad.fX, onQuad.fY,
onQuad.distance(q2[index]));
double left[3];
left[0] = ((const SkDLine&) q1[0]).isLeft(q2[index]);
left[1] = ((const SkDLine&) q1[1]).isLeft(q2[index]);
SkDLine diag = {{q1[0], q1[2]}};
left[2] = diag.isLeft(q2[index]);
SkDebugf("%s left=(%d, %d, %d) inHull=%s\n", __FUNCTION__, floatSign(left[0]),
floatSign(left[1]), floatSign(left[2]),
q1.pointInHull(q2[index]) ? "true" : "false");
}
SkDebugf("\n");
}
// find a point on a quad by choosing a t from 0 to 1
// create a vertical span above and below the point
// verify that intersecting the vertical span and the quad returns t
// verify that a vertical span starting at quad[0] intersects at t=0
// verify that a vertical span starting at quad[2] intersects at t=1
static void testQuadLineIntersectMain(PathOpsThreadState* data)
{
PathOpsThreadState& state = *data;
REPORTER_ASSERT(state.fReporter, data);
int ax = state.fA & 0x03;
int ay = state.fA >> 2;
int bx = state.fB & 0x03;
int by = state.fB >> 2;
int cx = state.fC & 0x03;
int cy = state.fC >> 2;
SkDQuad quad = {{{(double) ax, (double) ay}, {(double) bx, (double) by},
{(double) cx, (double) cy}
}
};
SkReduceOrder reducer;
int order = reducer.reduce(quad);
if (order < 3) {
return;
}
for (int tIndex = 0; tIndex <= 4; ++tIndex) {
SkDPoint xy = quad.ptAtT(tIndex / 4.0);
for (int h = -2; h <= 2; ++h) {
for (int v = -2; v <= 2; ++v) {
if (h == v && abs(h) != 1) {
continue;
}
double x = xy.fX;
double y = xy.fY;
SkDLine line = {{{x - h, y - v}, {x, y}}};
testLineIntersect(state.fReporter, quad, line, x, y);
state.fReporter->bumpTestCount();
SkDLine line2 = {{{x, y}, {x + h, y + v}}};
testLineIntersect(state.fReporter, quad, line2, x, y);
state.fReporter->bumpTestCount();
SkDLine line3 = {{{x - h, y - v}, {x + h, y + v}}};
testLineIntersect(state.fReporter, quad, line3, x, y);
state.fReporter->bumpTestCount();
}
}
}
}
static void testOneOffs(skiatest::Reporter* reporter) {
bool flipped = false;
for (size_t index = 0; index < oneOffs_count; ++index) {
const QuadPts& q = oneOffs[index].quad;
SkDQuad quad;
quad.debugSet(q.fPts);
SkASSERT(ValidQuad(quad));
const SkDLine& line = oneOffs[index].line;
SkASSERT(ValidLine(line));
SkIntersections intersections;
int result = doIntersect(intersections, quad, line, flipped);
for (int inner = 0; inner < result; ++inner) {
double quadT = intersections[0][inner];
SkDPoint quadXY = quad.ptAtT(quadT);
double lineT = intersections[1][inner];
SkDPoint lineXY = line.ptAtT(lineT);
if (!quadXY.approximatelyEqual(lineXY)) {
quadXY.approximatelyEqual(lineXY);
SkDebugf("");
}
REPORTER_ASSERT(reporter, quadXY.approximatelyEqual(lineXY));
}
}
}
void DumpT(const SkDQuad& quad, double t) {
SkDLine line = {{quad.ptAtT(t), quad[0]}};
line.dump();
}
// each time through the loop, this computes values it had from the last loop
// if i == j == 1, the center values are still good
// otherwise, for i != 1 or j != 1, four of the values are still good
// and if i == 1 ^ j == 1, an additional value is good
static bool binary_search(const SkDQuad& quad1, const SkDQuad& quad2, double* t1Seed,
double* t2Seed, SkDPoint* pt) {
double tStep = ROUGH_EPSILON;
SkDPoint t1[3], t2[3];
int calcMask = ~0;
do {
if (calcMask & (1 << 1)) t1[1] = quad1.ptAtT(*t1Seed);
if (calcMask & (1 << 4)) t2[1] = quad2.ptAtT(*t2Seed);
if (t1[1].approximatelyEqual(t2[1])) {
*pt = t1[1];
#if ONE_OFF_DEBUG
SkDebugf("%s t1=%1.9g t2=%1.9g (%1.9g,%1.9g) == (%1.9g,%1.9g)\n", __FUNCTION__,
t1Seed, t2Seed, t1[1].fX, t1[1].fY, t1[2].fX, t1[2].fY);
#endif
return true;
}
if (calcMask & (1 << 0)) t1[0] = quad1.ptAtT(*t1Seed - tStep);
if (calcMask & (1 << 2)) t1[2] = quad1.ptAtT(*t1Seed + tStep);
if (calcMask & (1 << 3)) t2[0] = quad2.ptAtT(*t2Seed - tStep);
if (calcMask & (1 << 5)) t2[2] = quad2.ptAtT(*t2Seed + tStep);
double dist[3][3];
// OPTIMIZE: using calcMask value permits skipping some distance calcuations
// if prior loop's results are moved to correct slot for reuse
dist[1][1] = t1[1].distanceSquared(t2[1]);
int best_i = 1, best_j = 1;
for (int i = 0; i < 3; ++i) {
for (int j = 0; j < 3; ++j) {
if (i == 1 && j == 1) {
continue;
}
dist[i][j] = t1[i].distanceSquared(t2[j]);
if (dist[best_i][best_j] > dist[i][j]) {
best_i = i;
best_j = j;
}
}
}
if (best_i == 1 && best_j == 1) {
tStep /= 2;
if (tStep < FLT_EPSILON_HALF) {
break;
}
calcMask = (1 << 0) | (1 << 2) | (1 << 3) | (1 << 5);
continue;
}
if (best_i == 0) {
*t1Seed -= tStep;
t1[2] = t1[1];
t1[1] = t1[0];
calcMask = 1 << 0;
} else if (best_i == 2) {
*t1Seed += tStep;
t1[0] = t1[1];
t1[1] = t1[2];
calcMask = 1 << 2;
} else {
calcMask = 0;
}
if (best_j == 0) {
*t2Seed -= tStep;
t2[2] = t2[1];
t2[1] = t2[0];
calcMask |= 1 << 3;
} else if (best_j == 2) {
*t2Seed += tStep;
t2[0] = t2[1];
t2[1] = t2[2];
calcMask |= 1 << 5;
}
} while (true);
#if ONE_OFF_DEBUG
SkDebugf("%s t1=%1.9g t2=%1.9g (%1.9g,%1.9g) != (%1.9g,%1.9g) %s\n", __FUNCTION__,
t1Seed, t2Seed, t1[1].fX, t1[1].fY, t1[2].fX, t1[2].fY);
#endif
return false;
}
static bool is_linear_inner(const SkDQuad& q1, double t1s, double t1e, const SkDQuad& q2,
double t2s, double t2e, SkIntersections* i, bool* subDivide) {
SkDQuad hull = q1.subDivide(t1s, t1e);
SkDLine line = {{hull[2], hull[0]}};
const SkDLine* testLines[] = { &line, (const SkDLine*) &hull[0], (const SkDLine*) &hull[1] };
const size_t kTestCount = SK_ARRAY_COUNT(testLines);
SkSTArray<kTestCount * 2, double, true> tsFound;
for (size_t index = 0; index < kTestCount; ++index) {
SkIntersections rootTs;
rootTs.allowNear(false);
int roots = rootTs.intersect(q2, *testLines[index]);
for (int idx2 = 0; idx2 < roots; ++idx2) {
double t = rootTs[0][idx2];
#ifdef SK_DEBUG
SkDPoint qPt = q2.ptAtT(t);
SkDPoint lPt = testLines[index]->ptAtT(rootTs[1][idx2]);
SkASSERT(qPt.approximatelyEqual(lPt));
#endif
if (approximately_negative(t - t2s) || approximately_positive(t - t2e)) {
continue;
}
tsFound.push_back(rootTs[0][idx2]);
}
}
int tCount = tsFound.count();
if (tCount <= 0) {
return true;
}
double tMin, tMax;
if (tCount == 1) {
tMin = tMax = tsFound[0];
} else {
SkASSERT(tCount > 1);
SkTQSort<double>(tsFound.begin(), tsFound.end() - 1);
tMin = tsFound[0];
tMax = tsFound[tsFound.count() - 1];
}
SkDPoint end = q2.ptAtT(t2s);
bool startInTriangle = hull.pointInHull(end);
if (startInTriangle) {
tMin = t2s;
}
end = q2.ptAtT(t2e);
bool endInTriangle = hull.pointInHull(end);
if (endInTriangle) {
tMax = t2e;
}
int split = 0;
SkDVector dxy1, dxy2;
if (tMin != tMax || tCount > 2) {
dxy2 = q2.dxdyAtT(tMin);
for (int index = 1; index < tCount; ++index) {
dxy1 = dxy2;
dxy2 = q2.dxdyAtT(tsFound[index]);
double dot = dxy1.dot(dxy2);
if (dot < 0) {
split = index - 1;
break;
}
}
}
if (split == 0) { // there's one point
if (add_intercept(q1, q2, tMin, tMax, i, subDivide)) {
return true;
}
i->swap();
return is_linear_inner(q2, tMin, tMax, q1, t1s, t1e, i, subDivide);
}
// At this point, we have two ranges of t values -- treat each separately at the split
bool result;
if (add_intercept(q1, q2, tMin, tsFound[split - 1], i, subDivide)) {
result = true;
} else {
i->swap();
result = is_linear_inner(q2, tMin, tsFound[split - 1], q1, t1s, t1e, i, subDivide);
}
if (add_intercept(q1, q2, tsFound[split], tMax, i, subDivide)) {
result = true;
} else {
i->swap();
result |= is_linear_inner(q2, tsFound[split], tMax, q1, t1s, t1e, i, subDivide);
}
return result;
}
static bool bruteMinT(skiatest::Reporter* reporter, const SkDQuad& quad1, const SkDQuad& quad2,
TRange* lowerRange, TRange* upperRange) {
double maxRadius = SkTMin(maxDist(quad1), maxDist(quad2));
double maxQuads = SkTMax(maxQuad(quad1), maxQuad(quad2));
double r = maxRadius / 2;
double rStep = r / 2;
SkDPoint best1 = {SK_ScalarInfinity, SK_ScalarInfinity};
SkDPoint best2 = {SK_ScalarInfinity, SK_ScalarInfinity};
int bestCCW = -1;
double bestR = maxRadius;
upperRange->tMin = 0;
lowerRange->tMin = 1;
do {
do { // find upper bounds of single result
TRange tRange;
bool stepUp = orderTRange(reporter, quad1, quad2, r, &tRange);
if (stepUp) {
SkDPoint pt1 = quad1.ptAtT(tRange.t1);
if (equalPoints(pt1, best1, maxQuads)) {
break;
}
best1 = pt1;
SkDPoint pt2 = quad2.ptAtT(tRange.t2);
if (equalPoints(pt2, best2, maxQuads)) {
break;
}
best2 = pt2;
if (gPathOpsAngleIdeasVerbose) {
SkDebugf("u bestCCW=%d ccw=%d bestMin=%1.9g:%1.9g r=%1.9g tMin=%1.9g\n",
bestCCW, tRange.ccw, lowerRange->tMin, upperRange->tMin, r,
tRange.tMin);
}
if (bestCCW >= 0 && bestCCW != (int) tRange.ccw) {
if (tRange.tMin < upperRange->tMin) {
upperRange->tMin = 0;
} else {
stepUp = false;
}
}
if (upperRange->tMin < tRange.tMin) {
bestCCW = tRange.ccw;
bestR = r;
*upperRange = tRange;
}
if (lowerRange->tMin > tRange.tMin) {
*lowerRange = tRange;
}
}
r += stepUp ? rStep : -rStep;
rStep /= 2;
} while (rStep > FLT_EPSILON);
if (bestCCW < 0) {
REPORTER_ASSERT(reporter, bestR < maxRadius);
return false;
}
double lastHighR = bestR;
r = bestR / 2;
rStep = r / 2;
do { // find lower bounds of single result
TRange tRange;
bool success = orderTRange(reporter, quad1, quad2, r, &tRange);
if (success) {
if (gPathOpsAngleIdeasVerbose) {
SkDebugf("l bestCCW=%d ccw=%d bestMin=%1.9g:%1.9g r=%1.9g tMin=%1.9g\n",
bestCCW, tRange.ccw, lowerRange->tMin, upperRange->tMin, r,
tRange.tMin);
}
if (bestCCW != (int) tRange.ccw || upperRange->tMin < tRange.tMin) {
bestCCW = tRange.ccw;
*upperRange = tRange;
bestR = lastHighR;
break; // need to establish a new upper bounds
}
SkDPoint pt1 = quad1.ptAtT(tRange.t1);
SkDPoint pt2 = quad2.ptAtT(tRange.t2);
if (equalPoints(pt1, best1, maxQuads)) {
goto breakOut;
}
best1 = pt1;
if (equalPoints(pt2, best2, maxQuads)) {
goto breakOut;
}
best2 = pt2;
if (equalPoints(pt1, pt2, maxQuads)) {
success = false;
} else {
if (upperRange->tMin < tRange.tMin) {
*upperRange = tRange;
}
if (lowerRange->tMin > tRange.tMin) {
*lowerRange = tRange;
}
}
lastHighR = SkTMin(r, lastHighR);
}
r += success ? -rStep : rStep;
rStep /= 2;
} while (rStep > FLT_EPSILON);
} while (rStep > FLT_EPSILON);
breakOut:
if (gPathOpsAngleIdeasVerbose) {
SkDebugf("l a2-a1==%1.9g\n", lowerRange->a2 - lowerRange->a1);
}
return true;
}
static double quadAngle(skiatest::Reporter* reporter, const SkDQuad& quad, double t) {
const SkDVector& pt = quad.ptAtT(t) - quad[0];
double angle = (atan2(pt.fY, pt.fX) + SK_ScalarPI) * 8 / (SK_ScalarPI * 2);
REPORTER_ASSERT(reporter, angle >= 0 && angle <= 8);
return angle;
}
static void setup(const SortSet* set, const size_t idx,
SkOpSegment* seg, int* ts, const SkPoint& startPt) {
SkPoint start, end;
const SkPoint* data = set[idx].ptData;
bool useIntersectPt = startPt.fX != 0 || startPt.fY != 0;
if (useIntersectPt) {
start = startPt;
end = set[idx].endPt;
}
switch(set[idx].ptCount) {
case 2: {
SkASSERT(ValidPoints(data, 2));
seg->addLine(data, false, false);
SkDLine dLine;
dLine.set(set[idx].ptData);
SkASSERT(ValidLine(dLine));
if (useIntersectPt) {
break;
}
start = dLine.ptAtT(set[idx].tStart).asSkPoint();
end = dLine.ptAtT(set[idx].tEnd).asSkPoint();
} break;
case 3: {
SkASSERT(ValidPoints(data, 3));
seg->addQuad(data, false, false);
SkDQuad dQuad;
dQuad.set(set[idx].ptData);
SkASSERT(ValidQuad(dQuad));
if (useIntersectPt) {
break;
}
start = dQuad.ptAtT(set[idx].tStart).asSkPoint();
end = dQuad.ptAtT(set[idx].tEnd).asSkPoint();
} break;
case 4: {
SkASSERT(ValidPoints(data, 4));
seg->addCubic(data, false, false);
SkDCubic dCubic;
dCubic.set(set[idx].ptData);
SkASSERT(ValidCubic(dCubic));
if (useIntersectPt) {
break;
}
start = dCubic.ptAtT(set[idx].tStart).asSkPoint();
end = dCubic.ptAtT(set[idx].tEnd).asSkPoint();
} break;
}
double tStart = set[idx].tStart;
double tEnd = set[idx].tEnd;
seg->addT(NULL, start, tStart);
seg->addT(NULL, end, tEnd);
if (tStart != 0 && tEnd != 0) {
seg->addT(NULL, set[idx].ptData[0], 0);
}
if (tStart != 1 && tEnd != 1) {
seg->addT(NULL, set[idx].ptData[set[idx].ptCount - 1], 1);
}
int tIndex = 0;
ts[0] = 0;
ts[1] = 1;
do {
if (seg->t(tIndex) == set[idx].tStart) {
ts[0] = tIndex;
}
if (seg->t(tIndex) == set[idx].tEnd) {
ts[1] = tIndex;
}
if (seg->t(tIndex) >= 1) {
break;
}
} while (++tIndex);
}
