예제 #1
0
/**
 * Creates a FStaticMeshRenderData from a D3DXMesh
 * @param DestMesh Destination mesh to extract to
 * @param NumUVs Number of UVs
 * @param Elements Elements array
 * @return Boolean representing success or failure
 */
bool ConvertD3DXMeshToRawMesh(
	TRefCountPtr<ID3DXMesh>& D3DMesh, 									  
	FRawMesh& DestMesh, 				  
	int32 NumUVs
	)
{
	// Extract simplified data to LOD
	FUtilVertex* D3DVertices;
	uint16*		 D3DIndices;
	::DWORD *		 D3DAttributes;
	D3DMesh->LockVertexBuffer(D3DLOCK_READONLY,(LPVOID*)&D3DVertices);
	D3DMesh->LockIndexBuffer(D3DLOCK_READONLY,(LPVOID*)&D3DIndices);
	D3DMesh->LockAttributeBuffer(D3DLOCK_READONLY,&D3DAttributes);

	int32 NumFaces = D3DMesh->GetNumFaces();
	int32 NumWedges = NumFaces * 3;

	DestMesh.FaceMaterialIndices.Init(NumFaces);
	DestMesh.FaceSmoothingMasks.Init(NumFaces);
	DestMesh.VertexPositions.Init(NumWedges);
	DestMesh.WedgeIndices.Init(NumWedges);
	DestMesh.WedgeColors.Init(NumWedges);
	DestMesh.WedgeTangentX.Init(NumWedges);
	DestMesh.WedgeTangentY.Init(NumWedges);
	DestMesh.WedgeTangentZ.Init(NumWedges);
	for (int32 UVIndex = 0; UVIndex < NumUVs; ++UVIndex)
	{
		DestMesh.WedgeTexCoords[UVIndex].Init(NumWedges);
	}

	for(int32 I=0;I<NumFaces;I++)
	{
		// Copy smoothing mask and index from any vertex into this triangle
		DestMesh.FaceSmoothingMasks[I] = D3DVertices[D3DIndices[I*3+0]].SmoothingMask;
		DestMesh.FaceMaterialIndices[I] = D3DAttributes[I];

		for(int UVs=0;UVs<NumUVs;UVs++)
		{
			DestMesh.WedgeTexCoords[UVs][I*3+0] = D3DVertices[D3DIndices[I*3+0]].UVs[UVs];
			DestMesh.WedgeTexCoords[UVs][I*3+1] = D3DVertices[D3DIndices[I*3+1]].UVs[UVs];
			DestMesh.WedgeTexCoords[UVs][I*3+2] = D3DVertices[D3DIndices[I*3+2]].UVs[UVs];
		}

		for(int32 K=0;K<3;K++)
		{
			DestMesh.WedgeIndices[I*3+K] = I*3+K;
			DestMesh.VertexPositions[I*3+K] = D3DVertices[D3DIndices[I*3+K]].Position;
			DestMesh.WedgeColors[I*3+K]   = D3DVertices[D3DIndices[I*3+K]].Color;
			DestMesh.WedgeTangentX[I*3+K] = D3DVertices[D3DIndices[I*3+K]].TangentX;
			DestMesh.WedgeTangentY[I*3+K] = D3DVertices[D3DIndices[I*3+K]].TangentY;
			DestMesh.WedgeTangentZ[I*3+K] = D3DVertices[D3DIndices[I*3+K]].TangentZ;
		}
	}

	D3DMesh->UnlockIndexBuffer();
	D3DMesh->UnlockVertexBuffer();
	D3DMesh->UnlockAttributeBuffer();
	return true;
}
예제 #2
0
bool FD3D9MeshUtilities::GenerateUVs(
	struct FRawMesh& RawMesh,
	uint32 TexCoordIndex,
	float MinChartSpacingPercent,
	float BorderSpacingPercent,
	bool bUseMaxStretch,
	const TArray< int32 >* InFalseEdgeIndices,
	uint32& MaxCharts,
	float& MaxDesiredStretch,
	FText& OutError
	)
{
	OutError = FText();
	if(!IsValid())
	{
		OutError = LOCTEXT("GenerateUVs_FailedInvalid", "GenerateUVs failed, mesh was invalid.");
		return false;
	}

	int32 NumTexCoords = 0;
	for (int32 i = 0; i < MAX_MESH_TEXTURE_COORDS; ++i)
	{
		if (RawMesh.WedgeTexCoords[i].Num() != RawMesh.WedgeIndices.Num())
		{
			break;
		}
		NumTexCoords++;
	}

	if (TexCoordIndex > (uint32)NumTexCoords)
	{
		OutError = LOCTEXT("GenerateUVs_FailedUVs", "GenerateUVs failed, incorrect number of texcoords.");
		return false;
	}

	TRefCountPtr<ID3DXMesh> ChartMesh;
	TArray<uint32> AtlasAndChartAdjacency;
	TArray<int32> AtlasAndChartTriangleCharts;
	{
		const bool bUseFalseEdges = InFalseEdgeIndices != NULL;

		// When using false edges we don't remove degenerates as we want our incoming selected edge list to map
		// correctly to the D3DXMesh.
		const bool bRemoveDegenerateTriangles = !bUseFalseEdges;

		// Create a D3DXMesh for the triangles being charted.
		TRefCountPtr<ID3DXMesh> SourceMesh;
		if (!ConvertRawMeshToD3DXMesh(Device, RawMesh,bRemoveDegenerateTriangles,SourceMesh))
		{
			OutError = LOCTEXT("GenerateUVs_FailedConvert", "GenerateUVs failed, couldn't convert to a D3DXMesh.");
			return false;
		}

		//generate adjacency info for the mesh, which is needed later
		TArray<uint32> Adjacency;
		GenerateAdjacency(SourceMesh,Adjacency,FFragmentedAdjacencyFilter());

		// We don't clean the mesh as this can collapse vertices or delete degenerate triangles, and
		// we want our incoming selected edge list to map correctly to the D3DXMesh.
		if( !bUseFalseEdges )
		{
			//clean the mesh
			TRefCountPtr<ID3DXMesh> TempMesh;
			TArray<uint32> CleanedAdjacency;
			CleanedAdjacency.AddUninitialized(SourceMesh->GetNumFaces() * 3);
			if( FAILED(D3DXCleanMesh( D3DXCLEAN_SIMPLIFICATION, SourceMesh, (::DWORD *)Adjacency.GetTypedData(), TempMesh.GetInitReference(), 
				(::DWORD *)CleanedAdjacency.GetTypedData(), NULL ) ) )
			{
				OutError = LOCTEXT("GenerateUVs_FailedClean", "GenerateUVs failed, couldn't clean mesh.");
				return false;
			}
			SourceMesh = TempMesh;
			Adjacency = CleanedAdjacency;
		}


		// Setup the D3DX "false edge" array.  This is three DWORDS per face that define properties of the
		// face's edges.  Values of -1 indicates that the edge may be used as a UV seam in a the chart.  Any
		// other value indicates that the edge should never be a UV seam.  This essentially allows us to
		// provide a precise list of edges to be used as UV seams in the new charts.
		uint32* FalseEdgeArray = NULL;
		TArray<uint32> FalseEdges;
		if( bUseFalseEdges )
		{
			// -1 means "always use this edge as a chart UV seam" to D3DX
 			FalseEdges.AddUninitialized( SourceMesh->GetNumFaces() * 3 );
			for( int32 CurFalseEdgeIndex = 0; CurFalseEdgeIndex < (int32)SourceMesh->GetNumFaces() * 3; ++CurFalseEdgeIndex )
			{
				FalseEdges[ CurFalseEdgeIndex ] = -1;
			}

			// For each tagged edge
			for( int32 CurTaggedEdgeIndex = 0; CurTaggedEdgeIndex < InFalseEdgeIndices->Num(); ++CurTaggedEdgeIndex )
			{
				const int32 EdgeIndex = ( *InFalseEdgeIndices )[ CurTaggedEdgeIndex ];
					
				// Mark this as a false edge by setting it to a value other than negative one
				FalseEdges[ EdgeIndex ] = Adjacency[ CurTaggedEdgeIndex ];
			}

			FalseEdgeArray = (uint32*)FalseEdges.GetTypedData();
		}

			
		// Partition the mesh's triangles into charts.
		TRefCountPtr<ID3DXBuffer> PartitionResultAdjacencyBuffer;
		TRefCountPtr<ID3DXBuffer> FacePartitionBuffer;
		HRESULT Result = D3DXUVAtlasPartition(
			SourceMesh,
			bUseMaxStretch ? 0 : MaxCharts,				// Max charts (0 = use max stretch instead)
			MaxDesiredStretch,
			TexCoordIndex,
			(::DWORD *)Adjacency.GetTypedData(),
			(::DWORD *)FalseEdgeArray,	// False edges
			NULL,		// IMT data
			&GenerateUVsStatusCallback,
			0.01f,		// Callback frequency
			NULL,			// Callback user data
			D3DXUVATLAS_GEODESIC_QUALITY,
			ChartMesh.GetInitReference(),
			FacePartitionBuffer.GetInitReference(),
			NULL,
			PartitionResultAdjacencyBuffer.GetInitReference(),
			&MaxDesiredStretch,
			&MaxCharts
			);
		if (FAILED(Result))
		{
			UE_LOG(LogD3D9MeshUtils, Warning, 
				TEXT("D3DXUVAtlasPartition() returned %u with MaxDesiredStretch=%.2f, TexCoordIndex=%u."),
				Result,
				MaxDesiredStretch,
				TexCoordIndex
				);
			OutError = LOCTEXT("GenerateUVs_FailedPartition", "GenerateUVs failed, D3DXUVAtlasPartition failed.");
			return false;
		}

		// Extract the chart adjacency data from the D3DX buffer into an array.
		for(uint32 TriangleIndex = 0;TriangleIndex < ChartMesh->GetNumFaces();TriangleIndex++)
		{
			for(int32 EdgeIndex = 0;EdgeIndex < 3;EdgeIndex++)
			{
				AtlasAndChartAdjacency.Add(*((uint32*)PartitionResultAdjacencyBuffer->GetBufferPointer()+TriangleIndex*3+EdgeIndex));
			}
		}

		// Extract the triangle chart data from the D3DX buffer into an array.
		uint32* FacePartitionBufferPointer = (uint32*)FacePartitionBuffer->GetBufferPointer();
		for(uint32 TriangleIndex = 0;TriangleIndex < ChartMesh->GetNumFaces();TriangleIndex++)
		{
			AtlasAndChartTriangleCharts.Add(*FacePartitionBufferPointer++);
		}

		// Scale the partitioned UVs down.
		FUtilVertex* LockedVertices;
		ChartMesh->LockVertexBuffer(0,(LPVOID*)&LockedVertices);
		for(uint32 VertexIndex = 0;VertexIndex < ChartMesh->GetNumVertices();VertexIndex++)
		{
			LockedVertices[VertexIndex].UVs[TexCoordIndex] /= 2048.0f;
		}
		ChartMesh->UnlockVertexBuffer();
	}

	if(ChartMesh)
	{
		// Create a buffer to hold the triangle chart data.
		TRefCountPtr<ID3DXBuffer> MergedTriangleChartsBuffer;
		VERIFYD3D9RESULT(D3DXCreateBuffer(
			AtlasAndChartTriangleCharts.Num() * sizeof(int32),
			MergedTriangleChartsBuffer.GetInitReference()
			));
		uint32* MergedTriangleChartsBufferPointer = (uint32*)MergedTriangleChartsBuffer->GetBufferPointer();
		for(int32 TriangleIndex = 0;TriangleIndex < AtlasAndChartTriangleCharts.Num();TriangleIndex++)
		{
			*MergedTriangleChartsBufferPointer++ = AtlasAndChartTriangleCharts[TriangleIndex];
		}

		const uint32 FakeTexSize = 1024;
		const float GutterSize = ( float )FakeTexSize * MinChartSpacingPercent * 0.01f;

		// Pack the charts into a unified atlas.
		HRESULT Result = D3DXUVAtlasPack(
			ChartMesh,
			FakeTexSize,
			FakeTexSize,
			GutterSize,
			TexCoordIndex,
			(::DWORD *)AtlasAndChartAdjacency.GetTypedData(),
			&GenerateUVsStatusCallback,
			0.01f,		// Callback frequency
			NULL,
			0,
			MergedTriangleChartsBuffer
			);
		if (FAILED(Result))
		{
			UE_LOG(LogD3D9MeshUtils, Warning, 
				TEXT("D3DXUVAtlasPack() returned %u."),
				Result
				);
			OutError = LOCTEXT("GenerateUVs_FailedPack", "GenerateUVs failed, D3DXUVAtlasPack failed.");
			return false;
		}

		int32 NewNumTexCoords = FMath::Max<int32>(NumTexCoords, TexCoordIndex + 1);
		FRawMesh FinalMesh;

		if (!ConvertD3DXMeshToRawMesh(ChartMesh, FinalMesh, NewNumTexCoords))
		{
			OutError = LOCTEXT("GenerateUVs_FailedSimple", "GenerateUVs failed, couldn't convert the simplified D3DXMesh back to a UStaticMesh.");
			return false;
		}

		// Scale/offset the UVs appropriately to ensure there is empty space around the border
		{
			const float BorderSize = BorderSpacingPercent * 0.01f;
			const float ScaleAmount = 1.0f - BorderSize * 2.0f;

			for( int32 CurUVIndex = 0; CurUVIndex < MAX_MESH_TEXTURE_COORDS; ++CurUVIndex )
			{
				int32 NumWedges = FinalMesh.WedgeTexCoords[CurUVIndex].Num();
				for( int32 WedgeIndex = 0; WedgeIndex < NumWedges; ++WedgeIndex )
				{
					FVector2D& UV = FinalMesh.WedgeTexCoords[CurUVIndex][WedgeIndex];
					UV.X = BorderSize + UV.X * ScaleAmount;
					UV.Y = BorderSize + UV.Y * ScaleAmount;
				}
			}
		}
		RawMesh = FinalMesh;
	}
	return true; 
}
예제 #3
0
bool FD3D9MeshUtilities::LayoutUVs(
	struct FRawMesh& RawMesh,
	uint32 TextureResolution,
	uint32 TexCoordIndex,
	FText& OutError
	)
{
	OutError = FText();
	if(!IsValid() || !RawMesh.IsValid())
	{
		OutError = LOCTEXT("LayoutUVs_FailedInvalid", "LayoutUVs failed, mesh was invalid.");
		return false;
	}

	int32 NumTexCoords = 0;
	for (int32 i = 0; i < MAX_MESH_TEXTURE_COORDS; ++i)
	{
		if (RawMesh.WedgeTexCoords[i].Num() != RawMesh.WedgeIndices.Num())
		{
			break;
		}
		NumTexCoords++;
	}

	if (TexCoordIndex > (uint32)NumTexCoords)
	{
		OutError = LOCTEXT("LayoutUVs_FailedUVs", "LayoutUVs failed, incorrect number of texcoords.");
		return false;
	}

	// Sort the mesh's triangles by whether they need to be charted, or just to be packed into the atlas.
	FRawMesh MeshToAtlas = RawMesh;
	if (TexCoordIndex > 0)
	{
		MeshToAtlas.WedgeTexCoords[TexCoordIndex] = MeshToAtlas.WedgeTexCoords[0];
	}

	TRefCountPtr<ID3DXMesh> ChartMesh;
	TArray<uint32> AtlasAndChartAdjacency;
	TArray<int32> AtlasAndChartTriangleCharts;
	TRefCountPtr<ID3DXMesh> MergedMesh;
	TArray<uint32> MergedAdjacency;
	TArray<int32> MergedTriangleCharts;
	TRefCountPtr<ID3DXMesh> AtlasOnlyMesh;
	TArray<uint32> AtlasOnlyAdjacency;
	TArray<int32> AtlasOnlyTriangleCharts;

	{
		// Create a D3DXMesh for the triangles that only need to be atlassed.
		const bool bRemoveDegenerateTriangles = true;
		if (!ConvertRawMeshToD3DXMesh(Device,MeshToAtlas,bRemoveDegenerateTriangles,AtlasOnlyMesh))
		{
			OutError = LOCTEXT("LayoutUVs_FailedConvert", "LayoutUVs failed, couldn't convert to a D3DXMesh.");
			return false;
		}
		// generate mapping orientations info 
		FLayoutUVWindingInfo WindingInfo(AtlasOnlyMesh, TexCoordIndex);
		// Generate adjacency for the pre-charted triangles based on their input charts.
		GenerateAdjacency(AtlasOnlyMesh,AtlasOnlyAdjacency,FUVChartAdjacencyFilter(TexCoordIndex), &WindingInfo);


		////clean the mesh
		TRefCountPtr<ID3DXMesh> TempMesh;
		TArray<uint32> CleanedAdjacency;
		CleanedAdjacency.AddUninitialized(AtlasOnlyMesh->GetNumFaces() * 3);
		if( FAILED(D3DXCleanMesh( D3DXCLEAN_SIMPLIFICATION, 
			AtlasOnlyMesh, 
			(::DWORD *)AtlasOnlyAdjacency.GetTypedData(), 
			TempMesh.GetInitReference(), 
			(::DWORD *)CleanedAdjacency.GetTypedData(), 
			NULL ) ) )
		{
			OutError = LOCTEXT("LayoutUVs_FailedClean", "LayoutUVs failed, couldn't clean mesh.");
			return false;
		}

		// Group the pre-charted triangles into indexed charts based on their adjacency in the chart.
		AssignMinimalAdjacencyGroups(CleanedAdjacency,AtlasOnlyTriangleCharts);

		MergedMesh = TempMesh;
		MergedAdjacency = CleanedAdjacency;
		MergedTriangleCharts = AtlasOnlyTriangleCharts;
	}

	if(MergedMesh)
	{
		// Create a buffer to hold the triangle chart data.
		TRefCountPtr<ID3DXBuffer> MergedTriangleChartsBuffer;
		VERIFYD3D9RESULT(D3DXCreateBuffer(
			MergedTriangleCharts.Num() * sizeof(int32),
			MergedTriangleChartsBuffer.GetInitReference()
			));
		uint32* MergedTriangleChartsBufferPointer = (uint32*)MergedTriangleChartsBuffer->GetBufferPointer();
		for(int32 TriangleIndex = 0;TriangleIndex < MergedTriangleCharts.Num();TriangleIndex++)
		{
			*MergedTriangleChartsBufferPointer++ = MergedTriangleCharts[TriangleIndex];
		}
		const float GutterSize = 2.0f;
		// Pack the charts into a unified atlas.
		HRESULT Result = D3DXUVAtlasPack(
			MergedMesh,
			TextureResolution,
			TextureResolution,
			GutterSize,
			TexCoordIndex,
			(::DWORD *)MergedAdjacency.GetTypedData(),
			NULL,
			0,
			NULL,
			0,
			MergedTriangleChartsBuffer
			);
		if (FAILED(Result))
		{
			UE_LOG(LogD3D9MeshUtils, Warning, 
				TEXT("D3DXUVAtlasPack() returned %u."),
				Result
				);
			OutError = LOCTEXT("LayoutUVs_FailedPack", "LayoutUVs failed, D3DXUVAtlasPack failed.");
			return false;
		}

		int32 NewNumTexCoords = FMath::Max<int32>(NumTexCoords, TexCoordIndex + 1);
		FRawMesh FinalMesh;
		if (!ConvertD3DXMeshToRawMesh(MergedMesh, FinalMesh, NewNumTexCoords))
		{
			OutError = LOCTEXT("LayoutUVs_FailedSimple", "LayoutUVs failed, couldn't convert the simplified D3DXMesh back to a UStaticMesh.");
			return false;
		}
		RawMesh = FinalMesh;
	}
	return true;
}