//=======================================================================
//function : StoreInMVE
//purpose :
//=======================================================================
static void StoreInMVE (const TopoDS_Face& F,
TopoDS_Edge& E,
TopTools_DataMapOfShapeListOfShape& MVE )
{
TopoDS_Vertex V1, V2;
TopTools_ListOfShape Empty;
TopExp::Vertices(E,V1,V2);
if (!MVE.IsBound(V1)) {
MVE.Bind(V1,Empty);
}
MVE(V1).Append(E);
if (!MVE.IsBound(V2)) {
MVE.Bind(V2,Empty);
}
MVE(V2).Append(E);
}
//=======================================================================
//function : Perform
//purpose :
//=======================================================================
void Partition_Loop::Perform()
{
TopTools_DataMapOfShapeListOfShape MVE;
TopTools_DataMapIteratorOfDataMapOfShapeListOfShape Mapit, Mapit1;
TopTools_ListIteratorOfListOfShape itl;
TopoDS_Vertex V1,V2;
//-----------------------------------
// Construction map vertex => edges
//-----------------------------------
for (itl.Initialize(myConstEdges); itl.More(); itl.Next()) {
TopoDS_Edge& E = TopoDS::Edge(itl.Value());
StoreInMVE(myFace,E,MVE);
}
//----------------------------------------------
// Construction of all the wires and of all the new faces.
//----------------------------------------------
TopTools_MapOfOrientedShape UsedEdges;
while (!MVE.IsEmpty()) {
TopoDS_Vertex VF,CV;
TopoDS_Edge CE,NE,EF;
TopoDS_Wire NW;
BRep_Builder B;
Standard_Boolean End= Standard_False;
B.MakeWire(NW);
//--------------------------------
// EF first edge.
//--------------------------------
Mapit.Initialize(MVE);
EF = CE = TopoDS::Edge(Mapit.Value().First());
TopExp::Vertices(CE,V1,V2);
//--------------------------------
// VF first vertex
//--------------------------------
if (CE.Orientation() == TopAbs_FORWARD) {
CV = VF = V1;
}
else {
CV = VF = V2;
}
if (!MVE.IsBound(CV)) continue;
for ( itl.Initialize(MVE(CV)); itl.More(); itl.Next()) {
if (itl.Value().IsEqual(CE)) {
MVE(CV).Remove(itl);
break;
}
}
int i = 0;
while (!End) {
//-------------------------------
// Construction of a wire.
//-------------------------------
TopExp::Vertices(CE,V1,V2);
if (!CV.IsSame(V1)) CV = V1; else CV = V2;
B.Add (NW,CE);
UsedEdges.Add(CE);
//--------------
// stop test
//--------------
if (!MVE.IsBound(CV) || MVE(CV).IsEmpty() || CV.IsSame(VF) ) {
if (CV.IsSame(VF)) {
if (MVE(CV).Extent() == 1 ) MVE.UnBind(CV);
else {
for ( itl.Initialize(MVE(CV)); itl.More(); itl.Next()) {
if (itl.Value().IsEqual(CE)) {
MVE(CV).Remove(itl);
break;
}
}
}
}
End=Standard_True;
}
//--------------
// select edge
//--------------
else {
Standard_Boolean find = SelectEdge(myFace,CE,CV,NE,MVE(CV));
if (find) {
CE=NE;
if (MVE(CV).IsEmpty()) MVE.UnBind(CV);
if (CE.IsNull() ) {
MESSAGE ( " CE is NULL !!! " )
End=Standard_True;
}
}
else {
MESSAGE ( " edge doesn't exist " )
End=Standard_True;
}
}
}
//-----------------------------
// Test if the wire is closed
//-----------------------------
if (VF.IsSame(CV) && SamePnt2d(VF,EF,CE,myFace)) {
}
else{
MESSAGE ( "wire not closed" )
}
myNewWires.Append (NW);
}
PurgeNewEdges(myConstEdges,UsedEdges);
}
//=======================================================================
//function : PerformAreas
//purpose :
//=======================================================================
void GEOMAlgo_BuilderFace::PerformAreas()
{
myErrorStatus=0;
//
Standard_Boolean bIsGrowth, bIsHole;
Standard_Real aTol;
TopTools_ListOfShape aNewFaces, aHoleWires;
TopoDS_Shape anInfinitePointShape;
TopTools_DataMapOfShapeShape aInOutMap;
TopTools_DataMapOfShapeListOfShape aMSH;
TopTools_DataMapIteratorOfDataMapOfShapeListOfShape aItMSH;
TopTools_ListIteratorOfListOfShape aIt1, aIt2;
TopTools_IndexedMapOfShape aMHE;
BRep_Builder aBB;
Handle(Geom_Surface) aS;
TopLoc_Location aLoc;
//
aTol=BRep_Tool::Tolerance(myFace);
aS=BRep_Tool::Surface(myFace, aLoc);
//
myAreas.Clear();
//
// Draft faces [aNewFaces]
aIt1.Initialize(myLoops);
for ( ; aIt1.More(); aIt1.Next()) {
const TopoDS_Shape& aWire=aIt1.Value();
//
bIsGrowth=IsGrowthWire(aWire, aMHE);
if (bIsGrowth) {
// make a growth face from a wire
TopoDS_Face aFace;
aBB.MakeFace(aFace, aS, aLoc, aTol);
aBB.Add (aFace, aWire);
//
aNewFaces.Append (aFace);
}
else{
// check if a wire is a hole
//XX
//bIsHole=IsHole(aWire, myFace, myContext);
bIsHole=GEOMAlgo_BuilderTools::IsHole(aWire, myFace);
//XX
if (bIsHole) {
aHoleWires.Append(aWire);
TopExp::MapShapes(aWire, TopAbs_EDGE, aMHE);
}
else {
// make a growth face from a wire
TopoDS_Face aFace;
aBB.MakeFace(aFace, aS, aLoc, aTol);
aBB.Add (aFace, aWire);
//
aNewFaces.Append (aFace);
}
}
}
//
// 2. Find outer growth shell that is most close to each hole shell
aIt2.Initialize(aHoleWires);
for (; aIt2.More(); aIt2.Next()) {
const TopoDS_Shape& aHole = aIt2.Value();
//
aIt1.Initialize(aNewFaces);
for ( ; aIt1.More(); aIt1.Next()) {
const TopoDS_Shape& aF=aIt1.Value();
//
if (!IsInside(aHole, aF, myContext)){
continue;
}
//
if ( aInOutMap.IsBound (aHole)){
const TopoDS_Shape& aF2=aInOutMap(aHole);
if (IsInside(aF, aF2, myContext)) {
aInOutMap.UnBind(aHole);
aInOutMap.Bind (aHole, aF);
}
}
else{
aInOutMap.Bind (aHole, aF);
}
}
//
// Add aHole to a map Face/ListOfHoles [aMSH]
if (aInOutMap.IsBound(aHole)){
const TopoDS_Shape& aF=aInOutMap(aHole);
if (aMSH.IsBound(aF)) {
TopTools_ListOfShape& aLH=aMSH.ChangeFind(aF);
aLH.Append(aHole);
}
else {
TopTools_ListOfShape aLH;
aLH.Append(aHole);
aMSH.Bind(aF, aLH);
}
}
}// for (; aIt2.More(); aIt2.Next())
//
// 3. Add aHoles to Faces
aItMSH.Initialize(aMSH);
for (; aItMSH.More(); aItMSH.Next()) {
TopoDS_Face aF=TopoDS::Face(aItMSH.Key());
//
const TopTools_ListOfShape& aLH=aItMSH.Value();
aIt2.Initialize(aLH);
for (; aIt2.More(); aIt2.Next()) {
const TopoDS_Shape& aHole = aIt2.Value();
aBB.Add (aF, aHole);
}
//
// update classifier
aTol=BRep_Tool::Tolerance(aF);
IntTools_FClass2d& aClsf=myContext->FClass2d(aF);
aClsf.Init(aF, aTol);
}
//
// These aNewFaces are draft faces that
// do not contain any internal shapes
//
myAreas.Append(aNewFaces);
}
