예제 #1
0
void VoxelManipulator::copyFrom(MapNode *src, const VoxelArea& src_area,
		v3s16 from_pos, v3s16 to_pos, v3s16 size)
{
	/* The reason for this optimised code is that we're a member function
	 * and the data type/layout of m_data is know to us: it's stored as
	 * [z*h*w + y*h + x]. Therefore we can take the calls to m_area index
	 * (which performs the preceding mapping/indexing of m_data) out of the
	 * inner loop and calculate the next index as we're iterating to gain
	 * performance.
	 *
	 * src_step and dest_step is the amount required to be added to our index
	 * every time y increments. Because the destination area may be larger
	 * than the source area we need one additional variable (otherwise we could
	 * just continue adding dest_step as is done for the source data): dest_mod.
	 * dest_mod is the difference in size between a "row" in the source data
	 * and a "row" in the destination data (I am using the term row loosely
	 * and for illustrative purposes). E.g.
	 *
	 * src       <-------------------->|'''''' dest mod ''''''''
	 * dest      <--------------------------------------------->
	 *
	 * dest_mod (it's essentially a modulus) is added to the destination index
	 * after every full iteration of the y span.
	 *
	 * This method falls under the category "linear array and incrementing
	 * index".
	 */

	s32 src_step = src_area.getExtent().X;
	s32 dest_step = m_area.getExtent().X;
	s32 dest_mod = m_area.index(to_pos.X, to_pos.Y, to_pos.Z + 1)
			- m_area.index(to_pos.X, to_pos.Y, to_pos.Z)
			- dest_step * size.Y;

	s32 i_src = src_area.index(from_pos.X, from_pos.Y, from_pos.Z);
	s32 i_local = m_area.index(to_pos.X, to_pos.Y, to_pos.Z);

	for (s16 z = 0; z < size.Z; z++) {
		for (s16 y = 0; y < size.Y; y++) {
			memcpy(&m_data[i_local], &src[i_src], size.X * sizeof(*m_data));
			memset(&m_flags[i_local], 0, size.X);
			i_src += src_step;
			i_local += dest_step;
		}
		i_local += dest_mod;
	}
}
예제 #2
0
파일: voxel.cpp 프로젝트: Anchakor/minetest
void VoxelManipulator::copyTo(MapNode *dst, VoxelArea dst_area,
		v3s16 dst_pos, v3s16 from_pos, v3s16 size)
{
	for(s16 z=0; z<size.Z; z++)
	for(s16 y=0; y<size.Y; y++)
	{
		s32 i_dst = dst_area.index(dst_pos.X, dst_pos.Y+y, dst_pos.Z+z);
		s32 i_local = m_area.index(from_pos.X, from_pos.Y+y, from_pos.Z+z);
		memcpy(&dst[i_dst], &m_data[i_local], size.X*sizeof(MapNode));
	}
}
예제 #3
0
파일: voxel.cpp 프로젝트: Anchakor/minetest
void VoxelManipulator::copyFrom(MapNode *src, VoxelArea src_area,
		v3s16 from_pos, v3s16 to_pos, v3s16 size)
{
	for(s16 z=0; z<size.Z; z++)
	for(s16 y=0; y<size.Y; y++)
	{
		s32 i_src = src_area.index(from_pos.X, from_pos.Y+y, from_pos.Z+z);
		s32 i_local = m_area.index(to_pos.X, to_pos.Y+y, to_pos.Z+z);
		memcpy(&m_data[i_local], &src[i_src], size.X*sizeof(MapNode));
		memset(&m_flags[i_local], 0, size.X);
	}
}
예제 #4
0
void VoxelManipulator::copyTo(MapNode *dst, const VoxelArea& dst_area,
		v3s16 dst_pos, v3s16 from_pos, v3s16 size)
{
	for(s16 z=0; z<size.Z; z++)
	for(s16 y=0; y<size.Y; y++)
	{
		s32 i_dst = dst_area.index(dst_pos.X, dst_pos.Y+y, dst_pos.Z+z);
		s32 i_local = m_area.index(from_pos.X, from_pos.Y+y, from_pos.Z+z);
		for (s16 x = 0; x < size.X; x++) {
			if (m_data[i_local].getContent() != CONTENT_IGNORE)
				dst[i_dst] = m_data[i_local];
			i_dst++;
			i_local++;
		}
	}
}
예제 #5
0
void Mapgen::lightSpread(VoxelArea &a, v3s16 p, u8 light) {
	if (light <= 1 || !a.contains(p))
		return;

	u32 vi = vm->m_area.index(p);
	MapNode &nn = vm->m_data[vi];

	light--;
	// should probably compare masked, but doesn't seem to make a difference
	if (light <= nn.param1 || !ndef->get(nn).light_propagates)
		return;

	nn.param1 = light;

	lightSpread(a, p + v3s16(0, 0, 1), light);
	lightSpread(a, p + v3s16(0, 1, 0), light);
	lightSpread(a, p + v3s16(1, 0, 0), light);
	lightSpread(a, p - v3s16(0, 0, 1), light);
	lightSpread(a, p - v3s16(0, 1, 0), light);
	lightSpread(a, p - v3s16(1, 0, 0), light);
}
예제 #6
0
void VoxelManipulator::addArea(const VoxelArea &area)
{
	// Cancel if requested area has zero volume
	if (area.hasEmptyExtent())
		return;

	// Cancel if m_area already contains the requested area
	if(m_area.contains(area))
		return;

	TimeTaker timer("addArea", &addarea_time);

	// Calculate new area
	VoxelArea new_area;
	// New area is the requested area if m_area has zero volume
	if(m_area.hasEmptyExtent())
	{
		new_area = area;
	}
	// Else add requested area to m_area
	else
	{
		new_area = m_area;
		new_area.addArea(area);
	}

	s32 new_size = new_area.getVolume();

	/*dstream<<"adding area ";
	area.print(dstream);
	dstream<<", old area ";
	m_area.print(dstream);
	dstream<<", new area ";
	new_area.print(dstream);
	dstream<<", new_size="<<new_size;
	dstream<<std::endl;*/

	// Allocate new data and clear flags
	MapNode *new_data = new MapNode[new_size];
	assert(new_data);
	u8 *new_flags = new u8[new_size];
	assert(new_flags);
	memset(new_flags, VOXELFLAG_NO_DATA, new_size);

	// Copy old data
	s32 old_x_width = m_area.MaxEdge.X - m_area.MinEdge.X + 1;
	for(s32 z=m_area.MinEdge.Z; z<=m_area.MaxEdge.Z; z++)
	for(s32 y=m_area.MinEdge.Y; y<=m_area.MaxEdge.Y; y++)
	{
		unsigned int old_index = m_area.index(m_area.MinEdge.X,y,z);
		unsigned int new_index = new_area.index(m_area.MinEdge.X,y,z);

		memcpy(&new_data[new_index], &m_data[old_index],
				old_x_width * sizeof(MapNode));
		memcpy(&new_flags[new_index], &m_flags[old_index],
				old_x_width * sizeof(u8));
	}

	// Replace area, data and flags

	m_area = new_area;

	MapNode *old_data = m_data;
	u8 *old_flags = m_flags;

	/*dstream<<"old_data="<<(int)old_data<<", new_data="<<(int)new_data
	<<", old_flags="<<(int)m_flags<<", new_flags="<<(int)new_flags<<std::endl;*/

	m_data = new_data;
	m_flags = new_flags;

	delete[] old_data;
	delete[] old_flags;

	//dstream<<"addArea done"<<std::endl;
}
예제 #7
0
파일: voxel.cpp 프로젝트: Anchakor/minetest
void VoxelManipulator::addArea(VoxelArea area)
{
	// Cancel if requested area has zero volume
	if(area.getExtent() == v3s16(0,0,0))
		return;
	
	// Cancel if m_area already contains the requested area
	if(m_area.contains(area))
		return;
	
	TimeTaker timer("addArea", &addarea_time);

	// Calculate new area
	VoxelArea new_area;
	// New area is the requested area if m_area has zero volume
	if(m_area.getExtent() == v3s16(0,0,0))
	{
		new_area = area;
	}
	// Else add requested area to m_area
	else
	{
		new_area = m_area;
		new_area.addArea(area);
	}

	s32 new_size = new_area.getVolume();

	/*dstream<<"adding area ";
	area.print(dstream);
	dstream<<", old area ";
	m_area.print(dstream);
	dstream<<", new area ";
	new_area.print(dstream);
	dstream<<", new_size="<<new_size;
	dstream<<std::endl;*/

	// Allocate and clear new data
	MapNode *new_data = new MapNode[new_size];
	u8 *new_flags = new u8[new_size];
	for(s32 i=0; i<new_size; i++)
	{
		new_flags[i] = VOXELFLAG_NOT_LOADED;
	}
	
	// Copy old data
	
	for(s32 z=m_area.MinEdge.Z; z<=m_area.MaxEdge.Z; z++)
	for(s32 y=m_area.MinEdge.Y; y<=m_area.MaxEdge.Y; y++)
	for(s32 x=m_area.MinEdge.X; x<=m_area.MaxEdge.X; x++)
	{
		// If loaded, copy data and flags
		if((m_flags[m_area.index(x,y,z)] & VOXELFLAG_NOT_LOADED) == false)
		{
			new_data[new_area.index(x,y,z)] = m_data[m_area.index(x,y,z)];
			new_flags[new_area.index(x,y,z)] = m_flags[m_area.index(x,y,z)];
		}
	}

	// Replace area, data and flags
	
	m_area = new_area;
	
	MapNode *old_data = m_data;
	u8 *old_flags = m_flags;

	/*dstream<<"old_data="<<(int)old_data<<", new_data="<<(int)new_data
	<<", old_flags="<<(int)m_flags<<", new_flags="<<(int)new_flags<<std::endl;*/

	m_data = new_data;
	m_flags = new_flags;
	
	if(old_data)
		delete[] old_data;
	if(old_flags)
		delete[] old_flags;

	//dstream<<"addArea done"<<std::endl;
}