void parcelport::add_received_parcel(parcel p, std::size_t num_thread)
{
// do some work (notify event handlers)
if(applier_)
{
while (threads::threadmanager_is(state_starting))
{
boost::this_thread::sleep(boost::get_system_time() +
boost::posix_time::milliseconds(HPX_NETWORK_RETRIES_SLEEP));
}
// Give up if we're shutting down.
if (threads::threadmanager_is(state_stopping))
{
// LPT_(debug) << "parcelport: add_received_parcel: dropping late "
// "parcel " << p;
return;
}
// write this parcel to the log
// LPT_(debug) << "parcelport: add_received_parcel: " << p;
applier_->schedule_action(std::move(p));
}
// If the applier has not been set yet, we are in bootstrapping and
// need to execute the action directly
else
{
// TODO: Make assertions exceptions
// decode the action-type in the parcel
actions::base_action * act = p.get_action();
// early parcels should only be plain actions
HPX_ASSERT(actions::base_action::plain_action == act->get_action_type());
// early parcels can't have continuations
HPX_ASSERT(!p.get_continuation());
// We should not allow any exceptions to escape the execution of the
// action as this would bring down the ASIO thread we execute in.
try {
act->get_thread_function(0)
(threads::thread_state_ex(threads::wait_signaled));
}
catch (...) {
hpx::report_error(boost::current_exception());
}
}
}
void Foam::noAtomization::atomizeParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixtureProperties& fuels
) const
{
p.liquidCore() = 0.0;
}
void parcelport::put_parcel(parcel const& p, write_handler_type const& f)
{
typedef pending_parcels_map::iterator iterator;
typedef pending_parcels_map::mapped_type mapped_type;
naming::locality locality_id = p.get_destination_locality();
naming::gid_type parcel_id = p.get_parcel_id();
// enqueue the incoming parcel ...
{
lcos::local::spinlock::scoped_lock l(mtx_);
mapped_type& e = pending_parcels_[locality_id];
e.first.push_back(p);
e.second.push_back(f);
}
get_connection_and_send_parcels(locality_id, parcel_id);
}
void parcel_sent_handler(parcelhandler::write_handler_type & f,
boost::system::error_code const & ec, parcel const & p)
{
// inform termination detection of a sent message
if (!p.does_termination_detection())
{
hpx::detail::dijkstra_make_black();
}
// invoke the original handler
f(ec, p);
}
void parcelhandler::put_parcel(parcel& p, write_handler_type f)
{
// properly initialize parcel
init_parcel(p);
std::vector<naming::gid_type> const& gids = p.get_destinations();
std::vector<naming::address>& addrs = p.get_destination_addrs();
if (1 == gids.size()) {
if (!addrs[0])
resolver_.resolve(gids[0], addrs[0]);
}
else {
boost::dynamic_bitset<> locals;
resolver_.resolve(gids, addrs, locals);
}
if (!p.get_parcel_id())
p.set_parcel_id(parcel::generate_unique_id());
pp_.put_parcel(p, f);
}
///////////////////////////////////////////////////////////////////////////
// the code below is needed to bootstrap the parcel layer
void parcelport::early_pending_parcel_handler(
boost::system::error_code const& ec, parcel const & p)
{
if (ec) {
// all errors during early parcel handling are fatal
std::exception_ptr exception =
HPX_GET_EXCEPTION(ec,
"early_pending_parcel_handler",
"error while handling early parcel: " +
ec.message() + "(" +
std::to_string(ec.value()) +
")" + parcelset::dump_parcel(p));
hpx::report_error(exception);
return;
}
#if defined(HPX_HAVE_APEX) && defined(HPX_HAVE_PARCEL_PROFILING)
// tell APEX about the sent parcel
apex::send(p.parcel_id().get_lsb(), p.size(),
p.destination_locality_id());
#endif
}
void serialize_certificate(Archive& archive, Connection & connection,
std::set<boost::uint32_t>& localities, parcel const& p)
{
// We send the certificate corresponding to the originating locality
// of the parcel if this is the first message over this connection
// or if the originating locality is not the current one.
boost::uint32_t locality_id =
naming::get_locality_id_from_gid(p.get_parcel_id());
error_code ec(lightweight);
boost::uint32_t this_locality_id = get_locality_id(ec);
if (ec) {
// this should only happen during bootstrap
HPX_ASSERT(hpx::is_starting());
this_locality_id = locality_id;
}
bool has_certificate = false;
if ((connection.first_message_ || locality_id != this_locality_id) &&
localities.find(locality_id) == localities.end())
{
// the first message must originate from this locality
HPX_ASSERT(!connection.first_message_ || locality_id == this_locality_id);
components::security::signed_certificate const& certificate =
hpx::get_locality_certificate(locality_id, ec);
if (!ec) {
has_certificate = true;
if (locality_id == this_locality_id)
connection.first_message_ = false;
archive << has_certificate << certificate;
// keep track of all certificates already prepended for this message
localities.insert(locality_id);
}
else {
// if the certificate is not available we have to still be on
// the 'first' message (it's too early for a certificate)
HPX_ASSERT(connection.first_message_);
archive << has_certificate;
}
}
else {
archive << has_certificate;
}
}
boost::shared_ptr<parcel_buffer_type> get_buffer(parcel const & p, std::size_t arg_size)
{
// generate the name for this data_buffer
std::string data_buffer_name(p.get_parcel_id().to_string());
if(!buffer_)
{
// clear and preallocate out_buffer_ (or fetch from cache)
buffer_ = boost::make_shared<parcel_buffer_type>(
get_data_buffer((arg_size * 12) / 10 + 1024,
data_buffer_name)
);
}
else
{
buffer_->data_ =
get_data_buffer((arg_size * 12) / 10 + 1024,
data_buffer_name);
}
return buffer_;
}
bool add_parcel(parcel const& p)
{
naming::gid_type id(p.get_parcel_id());
// Add parcel to queue.
{
mutex_type::scoped_lock l(mtx_);
std::pair<parcel_map_type::iterator, bool> ret =
parcels_.insert(parcel_map_type::value_type(id, p));
if (!ret.second) {
HPX_THROW_EXCEPTION(bad_parameter,
"global_parcelhandler_queue::add_parcel",
"Could not add received parcel to the parcelhandler "
"queue");
return false;
}
}
// do some work (notify event handlers)
HPX_ASSERT(ph_ != 0);
notify_(*ph_, id);
return true;
}
void parcelport::put_parcel(parcel const& p, write_handler_type f)
{
typedef pending_parcels_map::iterator iterator;
naming::locality locality_id = p.get_destination_locality();
parcelport_connection_ptr client_connection;
// enqueue the incoming parcel ...
{
util::spinlock::scoped_lock l(mtx_);
pending_parcels_[locality_id].first.push_back(p);
pending_parcels_[locality_id].second.push_back(f);
}
// Get a connection or reserve space for a new connection.
if (!connection_cache_.get_or_reserve(locality_id, client_connection))
return;
// Check if we need to create the new connection.
if (!client_connection)
{
client_connection.reset(new parcelport_connection(
io_service_pool_.get_io_service(), locality_id,
connection_cache_, timer_, parcels_sent_));
// Connect to the target locality, retry if needed.
boost::system::error_code error = boost::asio::error::try_again;
for (int i = 0; i < HPX_MAX_NETWORK_RETRIES; ++i)
{
try {
naming::locality::iterator_type end = locality_id.connect_end();
for (naming::locality::iterator_type it =
locality_id.connect_begin(io_service_pool_.get_io_service());
it != end; ++it)
{
client_connection->socket().close();
client_connection->socket().connect(*it, error);
if (!error)
break;
}
if (!error)
break;
// we wait for a really short amount of time
// TODO: Should this be an hpx::threads::suspend?
boost::this_thread::sleep(boost::get_system_time() +
boost::posix_time::milliseconds(HPX_NETWORK_RETRIES_SLEEP));
}
catch (boost::system::error_code const& e) {
HPX_THROW_EXCEPTION(network_error,
"parcelport::send_parcel", e.message());
}
}
if (error) {
client_connection->socket().close();
hpx::util::osstream strm;
strm << error.message() << " (while trying to connect to: "
<< locality_id << ")";
HPX_THROW_EXCEPTION(network_error,
"parcelport::send_parcel",
hpx::util::osstream_get_string(strm));
}
#if defined(HPX_DEBUG)
else {
std::string connection_addr =
client_connection->socket().remote_endpoint().address().to_string();
boost::uint16_t connection_port =
client_connection->socket().remote_endpoint().port();
BOOST_ASSERT(locality_id.get_address() == connection_addr);
BOOST_ASSERT(locality_id.get_port() == connection_port);
}
#endif
}
#if defined(HPX_DEBUG)
else {
//LPT_(info) << "parcelport: reusing existing connection to: "
// << addr.locality_;
BOOST_ASSERT(locality_id == client_connection->destination());
std::string connection_addr = client_connection->socket().remote_endpoint().address().to_string();
boost::uint16_t connection_port = client_connection->socket().remote_endpoint().port();
BOOST_ASSERT(locality_id.get_address() == connection_addr);
BOOST_ASSERT(locality_id.get_port() == connection_port);
}
#endif
std::vector<parcel> parcels;
std::vector<write_handler_type> handlers;
util::spinlock::scoped_lock l(mtx_);
iterator it = pending_parcels_.find(locality_id);
if (it != pending_parcels_.end())
{
BOOST_ASSERT(it->first == locality_id);
std::swap(parcels, it->second.first);
std::swap(handlers, it->second.second);
}
// If the parcels didn't get sent by another connection ...
if (!parcels.empty() && !handlers.empty())
{
send_pending_parcels(client_connection, parcels, handlers);
}
else
{
// ... or re-add the stuff to the cache
BOOST_ASSERT(locality_id == client_connection->destination());
connection_cache_.reclaim(locality_id, client_connection);
}
}
void ETAB::breakupParcel
(
parcel& p,
const scalar deltaT,
const vector& Ug,
const liquidMixture& fuels
) const
{
scalar T = p.T();
scalar pc = spray_.p()[p.cell()];
scalar r = 0.5*p.d();
scalar r2 = r*r;
scalar r3 = r*r2;
scalar rho = fuels.rho(pc, T, p.X());
scalar sigma = fuels.sigma(pc, T, p.X());
scalar mu = fuels.mu(pc, T, p.X());
// inverse of characteristic viscous damping time
scalar rtd = 0.5*Cmu_*mu/(rho*r2);
// oscillation frequency (squared)
scalar omega2 = Comega_*sigma/(rho*r3) - rtd*rtd;
if (omega2 > 0)
{
scalar omega = sqrt(omega2);
scalar romega = 1.0/omega;
scalar rhog = spray_.rho()[p.cell()];
scalar We = p.We(Ug, rhog, sigma);
scalar Wetmp = We/WeCrit_;
scalar y1 = p.dev() - Wetmp;
scalar y2 = p.ddev()*romega;
scalar a = sqrt(y1*y1 + y2*y2);
// scotty we may have break-up
if (a+Wetmp > 1.0)
{
scalar phic = y1/a;
// constrain phic within -1 to 1
phic = max(min(phic, 1), -1);
scalar phit = acos(phic);
scalar phi = phit;
scalar quad = -y2/a;
if (quad < 0)
{
phi = 2*mathematicalConstant::pi - phit;
}
scalar tb = 0;
if (mag(p.dev()) < 1.0)
{
scalar theta = acos((1.0 - Wetmp)/a);
if (theta < phi)
{
if (2*mathematicalConstant::pi-theta >= phi)
{
theta = -theta;
}
theta += 2*mathematicalConstant::pi;
}
tb = (theta-phi)*romega;
// breakup occurs
if (deltaT > tb)
{
p.dev() = 1.0;
p.ddev() = -a*omega*sin(omega*tb + phi);
}
}
// update droplet size
if (deltaT > tb)
{
scalar sqrtWe = AWe_*pow(We, 4.0) + 1.0;
scalar Kbr = k1_*omega*sqrtWe;
if (We > WeTransition_)
{
sqrtWe = sqrt(We);
Kbr =k2_*omega*sqrtWe;
}
scalar rWetmp = 1.0/Wetmp;
scalar cosdtbu = max(-1.0, min(1.0, 1.0-rWetmp));
scalar dtbu = romega*acos(cosdtbu);
scalar decay = exp(-Kbr*dtbu);
scalar rNew = decay*r;
if (rNew < r)
{
p.d() = 2*rNew;
p.dev() = 0;
p.ddev() = 0;
}
}
}
}
else
{
// reset droplet distortion parameters
p.dev() = 0;
p.ddev() = 0;
}
}
void parcelhandler::put_parcel(parcel p, write_handler_type f)
{
HPX_ASSERT(resolver_);
naming::id_type const* ids = p.destinations();
naming::address* addrs = p.addrs();
// During bootstrap this is handled separately (see
// addressing_service::resolve_locality.
if (0 == hpx::threads::get_self_ptr() && !hpx::is_starting())
{
HPX_ASSERT(resolver_);
naming::gid_type locality =
naming::get_locality_from_gid(ids[0].get_gid());
if (!resolver_->has_resolved_locality(locality))
{
// reschedule request as an HPX thread to avoid hangs
void (parcelhandler::*put_parcel_ptr) (
parcel p, write_handler_type f
) = &parcelhandler::put_parcel;
threads::register_thread_nullary(
util::bind(
util::one_shot(put_parcel_ptr), this,
std::move(p), std::move(f)),
"parcelhandler::put_parcel", threads::pending, true,
threads::thread_priority_boost);
return;
}
}
// properly initialize parcel
init_parcel(p);
bool resolved_locally = true;
#if !defined(HPX_SUPPORT_MULTIPLE_PARCEL_DESTINATIONS)
if (!addrs[0])
{
resolved_locally = resolver_->resolve_local(ids[0], addrs[0]);
}
#else
std::size_t size = p.size();
if (0 == size) {
HPX_THROW_EXCEPTION(network_error, "parcelhandler::put_parcel",
"no destination address given");
return;
}
if (1 == size) {
if (!addrs[0])
resolved_locally = resolver_->resolve_local(ids[0], addrs[0]);
}
else {
boost::dynamic_bitset<> locals;
resolved_locally = resolver_->resolve_local(ids, addrs, size, locals);
}
#endif
if (!p.parcel_id())
p.parcel_id() = parcel::generate_unique_id();
using util::placeholders::_1;
using util::placeholders::_2;
write_handler_type wrapped_f =
util::bind(&detail::parcel_sent_handler, std::move(f), _1, _2);
// If we were able to resolve the address(es) locally we send the
// parcel directly to the destination.
if (resolved_locally)
{
// dispatch to the message handler which is associated with the
// encapsulated action
typedef std::pair<boost::shared_ptr<parcelport>, locality> destination_pair;
destination_pair dest = find_appropriate_destination(addrs[0].locality_);
if (load_message_handlers_)
{
policies::message_handler* mh =
p.get_message_handler(this, dest.second);
if (mh) {
mh->put_parcel(dest.second, std::move(p), std::move(wrapped_f));
return;
}
}
dest.first->put_parcel(dest.second, std::move(p), std::move(wrapped_f));
return;
}
// At least one of the addresses is locally unknown, route the parcel
// to the AGAS managing the destination.
++count_routed_;
resolver_->route(std::move(p), std::move(wrapped_f));
}
void reitzDiwakar::breakupParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixture& fuels
) const
{
/*
These are the default values for this model...
static const scalar Cbag = 6.0;
static const scalar Cb = 0.785;
static const scalar Cstrip = 0.5;
static const scalar Cs = 10.0;
*/
const PtrList<volScalarField>& Y = spray_.composition().Y();
label Ns = Y.size();
label cellI = p.cell();
scalar pressure = spray_.p()[cellI];
scalar temperature = spray_.T()[cellI];
scalar Taverage = p.T() + (temperature - p.T())/3.0;
scalar muAverage = 0.0;
scalar Winv = 0.0;
for(label i=0; i<Ns; i++)
{
Winv += Y[i][cellI]/spray_.gasProperties()[i].W();
muAverage += Y[i][cellI]*spray_.gasProperties()[i].mu(Taverage);
}
scalar R = specie::RR()*Winv;
// ideal gas law to evaluate density
scalar rhoAverage = pressure/R/Taverage;
scalar nuAverage = muAverage/rhoAverage;
scalar sigma = fuels.sigma(pressure, p.T(), p.X());
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
// The We and Re numbers are to be evaluated using the 1/3 rule.
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
scalar WeberNumber = p.We(vel, rhoAverage, sigma);
scalar ReynoldsNumber = p.Re(vel, nuAverage);
scalar sqRey = sqrt(ReynoldsNumber);
if (WeberNumber > Cbag_)
{
if (WeberNumber > Cstrip_*sqRey)
{
scalar dStrip =
pow(2.0*Cstrip_*sigma, 2.0)/
(
rhoAverage
* pow(mag(p.Urel(vel)), 3.0)
* muAverage
);
scalar tauStrip =
Cs_ * p.d()
* sqrt
(
fuels.rho(pressure, p.T(), p.X())
/ rhoAverage
)
/ mag(p.Urel(vel));
scalar fraction = deltaT/tauStrip;
// new droplet diameter, implicit calculation
p.d() = (fraction*dStrip + p.d())/(1.0 + fraction);
}
else
{
scalar dBag =
2.0 * Cbag_ * sigma
/ (
rhoAverage
* pow(mag(p.Urel(vel)), 2.0)
);
scalar tauBag =
Cb_ * p.d()
* sqrt
(
fuels.rho(pressure, p.T(), p.X())
* p.d()
/ sigma
);
scalar fraction = deltaT/tauBag;
// new droplet diameter, implicit calculation
p.d() = (fraction*dBag + p.d())/(1.0 + fraction);
}
}
}
void blobsSheetAtomization::atomizeParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixture& fuels
) const
{
const PtrList<volScalarField>& Y = spray_.composition().Y();
label Ns = Y.size();
label cellI = p.cell();
scalar pressure = spray_.p()[cellI];
scalar temperature = spray_.T()[cellI];
scalar Taverage = p.T() + (temperature - p.T())/3.0;
scalar Winv = 0.0;
for(label i=0; i<Ns; i++)
{
Winv += Y[i][cellI]/spray_.gasProperties()[i].W();
}
scalar R = specie::RR*Winv;
// ideal gas law to evaluate density
scalar rhoAverage = pressure/R/Taverage;
scalar sigma = fuels.sigma(pressure, p.T(), p.X());
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
// The We and Re numbers are to be evaluated using the 1/3 rule.
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
scalar rhoFuel = fuels.rho(1.0e+5, p.T(), p.X());
scalar U = mag(p.Urel(vel));
const injectorType& it =
spray_.injectors()[label(p.injector())].properties();
vector itPosition(vector::zero);
label nHoles = it.nHoles();
if (nHoles > 1)
{
for(label i=0; i<nHoles;i++)
{
itPosition += it.position(i);
}
itPosition /= nHoles;
}
else
{
itPosition = it.position(0);
}
// const vector itPosition = it.position();
scalar lBU = B_ * sqrt
(
rhoFuel * sigma * p.d() * cos(angle_*mathematicalConstant::pi/360.0)
/ sqr(rhoAverage*U)
);
scalar pWalk = mag(p.position() - itPosition);
if(pWalk > lBU && p.liquidCore() == 1.0)
{
p.liquidCore() = 0.0;
}
}
void Foam::SHF::breakupParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixtureProperties& fuels
) const
{
label cellI = p.cell();
scalar T = p.T();
scalar pc = spray_.p()[cellI];
scalar sigma = fuels.sigma(pc, T, p.X());
scalar rhoLiquid = fuels.rho(pc, T, p.X());
scalar muLiquid = fuels.mu(pc, T, p.X());
scalar rhoGas = spray_.rho()[cellI];
scalar weGas = p.We(vel, rhoGas, sigma);
scalar weLiquid = p.We(vel, rhoLiquid, sigma);
// correct the Reynolds number. Reitz is using radius instead of diameter
scalar reLiquid = p.Re(rhoLiquid, vel, muLiquid);
scalar ohnesorge = sqrt(weLiquid)/(reLiquid + VSMALL);
vector vRel = p.Urel(vel);
scalar weGasCorr = weGas/(1.0 + weCorrCoeff_*ohnesorge);
// droplet deformation characteristic time
scalar tChar = p.d()/mag(vRel)*sqrt(rhoLiquid/rhoGas);
scalar tFirst = cInit_*tChar;
scalar tSecond = 0;
scalar tCharSecond = 0;
// updating the droplet characteristic time
p.ct() += deltaT;
if (weGas > weConst_)
{
if (weGas < weCrit1_)
{
tCharSecond = c1_*pow((weGas - weConst_),cExp1_);
}
else if (weGas >= weCrit1_ && weGas <= weCrit2_)
{
tCharSecond = c2_*pow((weGas - weConst_),cExp2_);
}
else
{
tCharSecond = c3_*pow((weGas - weConst_),cExp3_);
}
}
scalar weC = weBuCrit_*(1.0+ohnCoeffCrit_*pow(ohnesorge, ohnExpCrit_));
scalar weB = weBuBag_*(1.0+ohnCoeffBag_*pow(ohnesorge, ohnExpBag_));
scalar weMM = weBuMM_*(1.0+ohnCoeffMM_*pow(ohnesorge, ohnExpMM_));
bool bag = (weGas > weC && weGas < weB);
bool multimode = (weGas >= weB && weGas <= weMM);
bool shear = (weGas > weMM);
tSecond = tCharSecond*tChar;
scalar tBreakUP = tFirst + tSecond;
if (p.ct() > tBreakUP)
{
scalar d32 =
coeffD_*p.d()*pow(ohnesorge, onExpD_)*pow(weGasCorr, weExpD_);
if (bag || multimode)
{
scalar d05 = d32Coeff_*d32;
scalar x = 0.0;
scalar y = 0.0;
scalar d = 0.0;
scalar px = 0.0;
do
{
x = cDmaxBM_*rndGen_.sample01<scalar>();
d = sqr(x)*d05;
y = rndGen_.sample01<scalar>();
px =
x
/(2.0*sqrt(constant::mathematical::twoPi)*sigma_)
*exp(-0.5*sqr((x-mu_)/sigma_));
} while (y >= px);
p.d() = d;
p.ct() = 0.0;
}
if (shear)
{
scalar dC = weConst_*sigma/(rhoGas*sqr(mag(vRel)));
scalar d32Red = 4.0*(d32*dC)/(5.0*dC - d32);
scalar initMass = p.m();
scalar d05 = d32Coeff_*d32Red;
scalar x = 0.0;
scalar y = 0.0;
scalar d = 0.0;
scalar px = 0.0;
do
{
x = cDmaxS_*rndGen_.sample01<scalar>();
d = sqr(x)*d05;
y = rndGen_.sample01<scalar>();
px =
x
/(2.0*sqrt(constant::mathematical::twoPi)*sigma_)
*exp(-0.5*sqr((x-mu_)/sigma_));
} while (y >= px);
p.d() = dC;
p.m() = corePerc_*initMass;
spray_.addParticle
(
new parcel
(
p.mesh(),
p.position(),
p.cell(),
p.tetFace(),
p.tetPt(),
p.n(),
d,
p.T(),
(1.0 - corePerc_)*initMass,
0.0,
0.0,
0.0,
-GREAT,
p.tTurb(),
0.0,
scalar(p.injector()),
p.U(),
p.Uturb(),
p.X(),
p.fuelNames()
)
);
p.ct() = 0.0;
}
}
}
void reitzKHRT::breakupParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixture& fuels
) const
{
label celli = p.cell();
scalar T = p.T();
scalar r = 0.5*p.d();
scalar pc = spray_.p()[celli];
scalar sigma = fuels.sigma(pc, T, p.X());
scalar rhoLiquid = fuels.rho(pc, T, p.X());
scalar muLiquid = fuels.mu(pc, T, p.X());
scalar rhoGas = spray_.rho()[celli];
scalar Np = p.N(rhoLiquid);
scalar semiMass = Np*pow(p.d(), 3.0);
scalar weGas = p.We(vel, rhoGas, sigma);
scalar weLiquid = p.We(vel, rhoLiquid, sigma);
// correct the Reynolds number. Reitz is using radius instead of diameter
scalar reLiquid = 0.5*p.Re(rhoLiquid, vel, muLiquid);
scalar ohnesorge = sqrt(weLiquid)/(reLiquid + VSMALL);
scalar taylor = ohnesorge*sqrt(weGas);
vector acceleration = p.Urel(vel)/p.tMom();
vector trajectory = p.U()/mag(p.U());
scalar gt = (g_ + acceleration) & trajectory;
// frequency of the fastest growing KH-wave
scalar omegaKH =
(0.34 + 0.38*pow(weGas, 1.5))
/((1 + ohnesorge)*(1 + 1.4*pow(taylor, 0.6)))
*sqrt(sigma/(rhoLiquid*pow(r, 3)));
// corresponding KH wave-length.
scalar lambdaKH =
9.02
*r
*(1.0 + 0.45*sqrt(ohnesorge))
*(1.0 + 0.4*pow(taylor, 0.7))
/pow(1.0 + 0.865*pow(weGas, 1.67), 0.6);
// characteristic Kelvin-Helmholtz breakup time
scalar tauKH = 3.726*b1_*r/(omegaKH*lambdaKH);
// stable KH diameter
scalar dc = 2.0*b0_*lambdaKH;
// the frequency of the fastest growing RT wavelength.
scalar helpVariable = mag(gt*(rhoLiquid - rhoGas));
scalar omegaRT = sqrt
(
2.0*pow(helpVariable, 1.5)
/(3.0*sqrt(3.0*sigma)*(rhoGas + rhoLiquid))
);
// RT wave number
scalar KRT = sqrt(helpVariable/(3.0*sigma + VSMALL));
// wavelength of the fastest growing RT frequency
scalar lambdaRT = 2.0*mathematicalConstant::pi*cRT_/(KRT + VSMALL);
// if lambdaRT < diameter, then RT waves are growing on the surface
// and we start to keep track of how long they have been growing
if ((p.ct() > 0) || (lambdaRT < p.d()))
{
p.ct() += deltaT;
}
// characteristic RT breakup time
scalar tauRT = cTau_/(omegaRT + VSMALL);
// check if we have RT breakup
if ((p.ct() > tauRT) && (lambdaRT < p.d()))
{
// the RT breakup creates diameter/lambdaRT new droplets
p.ct() = -GREAT;
scalar multiplier = p.d()/lambdaRT;
scalar nDrops = multiplier*Np;
p.d() = cbrt(semiMass/nDrops);
}
// otherwise check for KH breakup
else if (dc < p.d())
{
// no breakup below Weber = 12
if (weGas > weberLimit_)
{
label injector = label(p.injector());
scalar fraction = deltaT/tauKH;
// reduce the diameter according to the rate-equation
p.d() = (fraction*dc + p.d())/(1.0 + fraction);
scalar ms = rhoLiquid*Np*pow3(dc)*mathematicalConstant::pi/6.0;
p.ms() += ms;
// Total number of parcels for the whole injection event
label nParcels =
spray_.injectors()[injector].properties()->nParcelsToInject
(
spray_.injectors()[injector].properties()->tsoi(),
spray_.injectors()[injector].properties()->teoi()
);
scalar averageParcelMass =
spray_.injectors()[injector].properties()->mass()/nParcels;
if (p.ms()/averageParcelMass > msLimit_)
{
// set the initial ms value to -GREAT. This prevents
// new droplets from being formed from the child droplet
// from the KH instability
// mass of stripped child parcel
scalar mc = p.ms();
// Prevent child parcel from taking too much mass
if (mc > 0.5*p.m())
{
mc = 0.5*p.m();
}
spray_.addParticle
(
new parcel
(
spray_,
p.position(),
p.cell(),
p.n(),
dc,
p.T(),
mc,
0.0,
0.0,
0.0,
-GREAT,
p.tTurb(),
0.0,
p.injector(),
p.U(),
p.Uturb(),
p.X(),
p.fuelNames()
)
);
p.m() -= mc;
p.ms() = 0.0;
}
}
}
}
// Return 'keepParcel'
bool reflectParcel::wallTreatment
(
parcel& p,
const label globalFacei
) const
{
label patchi = p.patch(globalFacei);
label facei = p.patchFace(patchi, globalFacei);
const polyMesh& mesh = spray_.mesh();
if (mesh_.boundaryMesh()[patchi].isWall())
{
// wallNormal defined to point outwards of domain
vector Sf = mesh_.Sf().boundaryField()[patchi][facei];
Sf /= mag(Sf);
if (!mesh.moving())
{
// static mesh
scalar Un = p.U() & Sf;
if (Un > 0)
{
p.U() -= (1.0 + elasticity_)*Un*Sf;
}
}
else
{
// moving mesh
vector Ub1 = U_.boundaryField()[patchi][facei];
vector Ub0 = U_.oldTime().boundaryField()[patchi][facei];
scalar dt = spray_.runTime().deltaT().value();
const vectorField& oldPoints = mesh.oldPoints();
const vector& Cf1 = mesh.faceCentres()[globalFacei];
vector Cf0 = mesh.faces()[globalFacei].centre(oldPoints);
vector Cf = Cf0 + p.stepFraction()*(Cf1 - Cf0);
vector Sf0 = mesh.faces()[globalFacei].normal(oldPoints);
// for layer addition Sf0 = vector::zero and we use Sf
if (mag(Sf0) > SMALL)
{
Sf0 /= mag(Sf0);
}
else
{
Sf0 = Sf;
}
scalar magSfDiff = mag(Sf - Sf0);
vector Ub = Ub0 + p.stepFraction()*(Ub1 - Ub0);
if (magSfDiff > SMALL)
{
// rotation + translation
vector Sfp = Sf0 + p.stepFraction()*(Sf - Sf0);
vector omega = Sf0 ^ Sf;
scalar magOmega = mag(omega);
omega /= magOmega+SMALL;
scalar phiVel = ::asin(magOmega)/dt;
scalar dist = (p.position() - Cf) & Sfp;
vector pos = p.position() - dist*Sfp;
vector vrot = phiVel*(omega ^ (pos - Cf));
vector v = Ub + vrot;
scalar Un = ((p.U() - v) & Sfp);
if (Un > 0.0)
{
p.U() -= (1.0 + elasticity_)*Un*Sfp;
}
}
else
{
// translation
vector Ur = p.U() - Ub;
scalar Urn = Ur & Sf;
/*
if (mag(Ub-v) > SMALL)
{
Info << "reflectParcel:: v = " << v
<< ", Ub = " << Ub
<< ", facei = " << facei
<< ", patchi = " << patchi
<< ", globalFacei = " << globalFacei
<< ", name = " << mesh_.boundaryMesh()[patchi].name()
<< endl;
}
*/
if (Urn > 0.0)
{
p.U() -= (1.0 + elasticity_)*Urn*Sf;
}
}
}
}
else
{
FatalError
<< "bool reflectParcel::wallTreatment(parcel& parcel) const "
<< " parcel has hit a boundary "
<< mesh_.boundary()[patchi].type()
<< " which not yet has been implemented."
<< abort(FatalError);
}
return true;
}
void myLISA_3_InjPos::atomizeParcel
(
parcel& p,
const scalar deltaT,
const vector& vel,
const liquidMixture& fuels
) const
{
const PtrList<volScalarField>& Y = spray_.composition().Y();
label Ns = Y.size();
label cellI = p.cell();
scalar pressure = spray_.p()[cellI];
scalar temperature = spray_.T()[cellI];
//--------------------------------------AL____101015--------------------------------//
// scalar Taverage = p.T() + (temperature - p.T())/3.0;
scalar Taverage = temperature;
//-----------------------------------------END--------------------------------------//
scalar Winv = 0.0;
for(label i=0; i<Ns; i++)
{
Winv += Y[i][cellI]/spray_.gasProperties()[i].W();
}
scalar R = specie::RR*Winv;
// ideal gas law to evaluate density
scalar rhoAverage = pressure/R/Taverage;
//scalar nuAverage = muAverage/rhoAverage;
scalar sigma = fuels.sigma(pressure, p.T(), p.X());
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
// The We and Re numbers are to be evaluated using the 1/3 rule.
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
scalar WeberNumber = p.We(vel, rhoAverage, sigma);
scalar tau = 0.0;
scalar dL = 0.0;
scalar k = 0.0;
scalar muFuel = fuels.mu(pressure, p.T(), p.X());
scalar rhoFuel = fuels.rho(1.0e+5, p.T(), p.X());
scalar nuFuel = muFuel/rhoFuel;
vector uDir = p.U()/mag(p.U());
scalar uGas = mag(vel & uDir);
vector Ug = uGas*uDir;
/*
TL
It might be the relative velocity between Liquid and Gas, but I use the
absolute velocity of the parcel as suggested by the authors
*/
// scalar U = mag(p.Urel(vel));
scalar U = mag(p.U());
p.ct() += deltaT;
scalar Q = rhoAverage/rhoFuel;
const injectorType& it =
spray_.injectors()[label(p.injector())].properties();
if (it.nHoles() > 1)
{
Info << "Warning: This atomization model is not suitable for multihole injector." << endl
<< "Only the first hole will be used." << endl;
}
const vector direction = it.direction(0, spray_.runTime().value());
//--------------------------------CH 101108--------------------------------------------------//
// const vector itPosition = it.position(0);
const injectorModel& im = spray_.injection();
const vector itPosition = it.position(0) + im.injDist(0)*direction/mag(direction);
//------------------------------------END----------------------------------------------------//
scalar pWalk = mag(p.position() - itPosition);
// Updating liquid sheet tickness... that is the droplet diameter
// const vector direction = it.direction(0, spray_.runTime().value());
scalar h = (p.position() - itPosition) & direction;
scalar d = sqrt(sqr(pWalk)-sqr(h));
scalar time = pWalk/mag(p.U());
scalar elapsedTime = spray_.runTime().value();
scalar massFlow = it.massFlowRate(max(0.0,elapsedTime-time));
scalar hSheet = massFlow/(mathematicalConstant::pi*d*rhoFuel*mag(p.U()));
p.d() = min(hSheet,p.d());
if(WeberNumber > 27.0/16.0)
{
scalar kPos = 0.0;
scalar kNeg = Q*pow(U, 2.0)*rhoFuel/sigma;
scalar derivativePos = sqrt
(
Q*pow(U,2.0)
);
scalar derivativeNeg =
(
8.0*pow(nuFuel, 2.0)*pow(kNeg, 3.0)
+ Q*pow(U, 2.0)*kNeg
- 3.0*sigma/2.0/rhoFuel*pow(kNeg, 2.0)
)
/
sqrt
(
4.0*pow(nuFuel, 2.0)*pow(kNeg, 4.0)
+ Q*pow(U, 2.0)*pow(kNeg, 2.0)
- sigma*pow(kNeg, 3.0)/rhoFuel
)
-
4.0*nuFuel*kNeg;
scalar kOld = 0.0;
for(label i=0; i<40; i++)
{
k = kPos - (derivativePos/((derivativeNeg-derivativePos)/(kNeg-kPos)));
scalar derivativek =
(
8.0*pow(nuFuel, 2.0)*pow(k, 3.0)
+ Q*pow(U, 2.0)*k
- 3.0*sigma/2.0/rhoFuel*pow(k, 2.0)
)
/
sqrt
(
4.0*pow(nuFuel, 2.0)*pow(k, 4.0)
+ Q*pow(U, 2.0)*pow(k, 2.0)
- sigma*pow(k, 3.0)/rhoFuel
)
-
4.0*nuFuel*k;
if(derivativek > 0)
{
derivativePos = derivativek;
kPos = k;
}
else
{
derivativeNeg = derivativek;
kNeg = k;
}
if(mag(k-kOld)/k < 1e-4)
{
break;
}
kOld = k;
}
scalar omegaS =
- 2.0 * nuFuel * pow(k, 2.0)
+ sqrt
(
4.0*pow(nuFuel, 2.0)*pow(k, 4.0)
+ Q*pow(U, 2.0)*pow(k, 2.0)
- sigma*pow(k, 3.0)/rhoFuel
);
tau = cTau_/omegaS;
dL = sqrt(8.0*p.d()/k);
}
else
{
k =
rhoAverage*pow(U, 2.0)
/
2.0*sigma;
//--------------------------------------AL____101011--------------------------------//
// scalar J = pWalk*p.d()/2.0;
scalar J = time*hSheet/2.0;
//-----------------------------------------END--------------------------------------//
tau = pow(3.0*cTau_,2.0/3.0)*cbrt(J*sigma/(sqr(Q)*pow(U,4.0)*rhoFuel));
dL = sqrt(4.0*p.d()/k);
}
scalar kL =
1.0
/
(
dL *
pow(0.5 + 1.5 * muFuel/pow((rhoFuel*sigma*dL), 0.5), 0.5)
);
scalar dD = cbrt(3.0*mathematicalConstant::pi*pow(dL, 2.0)/kL);
// lisaExp is included in coeffsDict
// scalar lisaExp = 0.27;
scalar ambientPressure = 1.0e+5;
scalar pRatio = spray_.ambientPressure()/ambientPressure;
dD = dD*pow(pRatio,lisaExp_);
// modifications to take account of the flash boiling on primary breakUp
scalar pExp = 0.135;
scalar chi = 0.0;
label Nf = fuels.components().size();
scalar Td = p.T();
for(label i = 0; i < Nf ; i++)
{
if(fuels.properties()[i].pv(spray_.ambientPressure(), Td) >= 0.999*spray_.ambientPressure())
{
// The fuel is boiling.....
// Calculation of the boiling temperature
scalar tBoilingSurface = Td;
label Niter = 200;
for(label k=0; k< Niter ; k++)
{
scalar pBoil = fuels.properties()[i].pv(pressure, tBoilingSurface);
if(pBoil > pressure)
{
tBoilingSurface = tBoilingSurface - (Td-temperature)/Niter;
}
else
{
break;
}
}
scalar hl = fuels.properties()[i].hl(spray_.ambientPressure(), tBoilingSurface);
scalar iTp = fuels.properties()[i].h(spray_.ambientPressure(), Td) - spray_.ambientPressure()/fuels.properties()[i].rho(spray_.ambientPressure(), Td);
scalar iTb = fuels.properties()[i].h(spray_.ambientPressure(), tBoilingSurface) - spray_.ambientPressure()/fuels.properties()[i].rho(spray_.ambientPressure(), tBoilingSurface);
chi += p.X()[i]*(iTp-iTb)/hl;
}
}
// bounding chi
chi = max(chi, 0.0);
chi = min(chi, 1.0);
// modifing dD to take account of flash boiling
dD = dD*(1.0 - chi*pow(pRatio, -pExp));
scalar lBU = Cl_ * mag(p.U())*tau;
if(pWalk > lBU)
{
p.liquidCore() = 0.0;
// calculate the new diameter with the standard 1D Rosin Rammler distribution
//--------------------------------AL_____101012------------------------------//
// Calculation of the mean radius based on SMR rs. Coefficient factorGamma depends on nExp.
// Note that Reitz either used (Schmidt et al., 1999-01-0496) or skipped (Senecal et al.) this factor!!!
// scalar factorGamma = 0.75*sqrt(mathematicalConstant::pi); //nExp=2
scalar factorGamma = 1.;
scalar delta = dD/factorGamma;
/* dD is the SMD, and the delta is calculated using gama
function. Here we assume nExp = 2. */
// scalar delta = dD/(0.75*sqrt(mathematicalConstant::pi));
// scalar minValue = min(p.d()/20.0,dD/20.0);
scalar minValue = dD/10.0;
// delta is divided by 20 instead of 10 in order to make sure of small minValue
// scalar minValue = min(p.d(),dD/20.0);
// scalar maxValue = p.d();
scalar maxValue = dD;
// The pdf value for 4.0*delta is already very small.
// scalar maxValue = delta*4.0;
if(maxValue - minValue < SMALL)
{
// minValue = p.d()/20.0;
minValue = maxValue/20.0;
//-----------------------------------END-------------------------------------//
}
scalar range = maxValue - minValue;
scalar nExp = 3;
scalar rrd_[500];
//--------------------------------AL_____101012------------------------------//
scalar probFactorMin = exp(-pow(minValue/delta,nExp));
scalar probFactorMax = exp(-pow(maxValue/delta,nExp));
scalar probFactor = 1./(probFactorMin - probFactorMax);
//-----------------------------------END-------------------------------------//
for(label n=0; n<500; n++)
{
scalar xx = minValue + range*n/500;
//-------------------------------AL_____101012-------------------------------//
// rrd_[n] = 1 - exp(-pow(xx/delta,nExp));
rrd_[n] = (probFactorMin - exp(-pow(xx/delta,nExp)))*probFactor;
//-----------------------------------END-------------------------------------//
}
bool success = false;
scalar x = 0;
scalar y = rndGen_.scalar01();
label k = 0;
while(!success && (k<500))
{
if (rrd_[k]>y)
{
success = true;
}
k++;
}
//--------------------------------AL_____101012------------------------------//
// x = minValue + range*n/500;
x = minValue + range*(k-0.5)/500.0;
//------------------------------------END------------------------------------//
// New droplet diameter
p.d() = x;
p.ct() = 0.0;
}
}
