/**
* Finishes the display of movement for the supplied unit.
* If called before showing the unit reach the end of the path, it will be
* assumed that the movement ended early.
* If @a dir is not supplied, the final direction will be determined by (the
* last two traversed hexes of) the path.
*/
void unit_mover::finish(unit_ptr u, map_location::DIRECTION dir)
{
// Nothing to do here if the display is not valid.
if ( !can_draw_ ) {
// Make sure to reset the unit's animation to deal with a quirk in the
// action engine where it leaves it to us to reenable bars even if the
// display is initially locked.
u->anim_comp().set_standing(true);
return;
}
const map_location & end_loc = path_[current_];
const map_location::DIRECTION final_dir = current_ == 0 ?
path_[0].get_relative_dir(path_[1]) :
path_[current_-1].get_relative_dir(end_loc);
if ( animate_ )
{
wait_for_anims(); // In case proceed_to() did not wait for the last animation.
// Make sure the displayed unit is correct.
replace_temporary(u);
temp_unit_ptr_->set_location(end_loc);
temp_unit_ptr_->set_facing(final_dir);
// Animation
animator_.add_animation(temp_unit_ptr_.get(), "post_movement", end_loc);
animator_.start_animations();
animator_.wait_for_end();
animator_.clear();
// Switch the display back to the real unit.
u->set_hidden(was_hidden_);
temp_unit_ptr_->set_hidden(true);
events::mouse_handler* mousehandler = events::mouse_handler::get_singleton();
if ( mousehandler ) {
mousehandler->invalidate_reachmap();
}
}
else
{
// Show the unit at end of skipped animation
u->set_hidden(was_hidden_);
}
// Facing gets set even when not animating.
u->set_facing(dir == map_location::NDIRECTIONS ? final_dir : dir);
u->anim_comp().set_standing(true); // Need to reset u's animation so the new facing takes effect.
// Redraw path ends (even if not animating).
disp_->invalidate(path_.front());
disp_->invalidate(end_loc);
}
/**
* Initiates the display of movement for the supplied unit.
* This should be called before attempting to display moving to a new hex.
*/
void unit_mover::start(unit_ptr u)
{
// Nothing to do here if there is nothing to animate.
if ( !can_draw_ )
return;
// If no animation then hide unit until end of movement
if ( !animate_ ) {
was_hidden_ = u->get_hidden();
u->set_hidden(true);
return;
}
// This normally does nothing, but just in case...
wait_for_anims();
// Visually replace the original unit with the temporary.
// (Original unit is left on the map, so the unit count is correct.)
replace_temporary(u);
// Initialize our temporary unit for the move.
temp_unit_ptr_->set_location(path_[0]);
temp_unit_ptr_->set_facing(path_[0].get_relative_dir(path_[1]));
temp_unit_ptr_->anim_comp().set_standing(false);
disp_->invalidate(path_[0]);
// If the unit can be seen here by the viewing side:
if ( !is_enemy_ || !temp_unit_ptr_->invisible(path_[0]) ) {
// Scroll to the path, but only if it fully fits on screen.
// If it does not fit we might be able to do a better scroll later.
disp_->scroll_to_tiles(path_, game_display::ONSCREEN, true, true, 0.0, false);
}
// We need to clear big invalidation before the move and have a smooth animation
// (mainly black stripes and invalidation after canceling attack dialog).
// Two draw calls are needed to also redraw the previously invalidated hexes.
// We use update=false because we don't need delay here (no time wasted)
// and no screen refresh (will be done by last 3rd draw() and it optimizes
// the double blitting done by these invalidations).
disp_->draw(false);
disp_->draw(false);
// The last draw() was still slow, and its initial new_animation_frame() call
// is now old, so we do another draw() to get a fresh one
// TODO: replace that by a new_animation_frame() before starting anims
// don't forget to change the previous draw(false) to true
disp_->draw(true);
// extra immobile movement animation for take-off
animator_.add_animation(temp_unit_ptr_.get(), "pre_movement", path_[0], path_[1]);
animator_.start_animations();
animator_.wait_for_end();
animator_.clear();
// Switch the display back to the real unit.
u->set_facing(temp_unit_ptr_->facing());
u->anim_comp().set_standing(false); // Need to reset u's animation so the new facing takes effect.
u->set_hidden(was_hidden_);
temp_unit_ptr_->set_hidden(true);
}
/**
* Visually moves a unit from the last hex we drew to the one specified by
* @a path_index. If @a path_index points to an earlier hex, we do nothing.
* The moving unit will only be updated if update is set to true; otherwise,
* the provided unit is merely hidden during the movement and re-shown after.
* (Not updating the unit can produce smoother animations in some cases.)
* If @a wait is set to false, this returns without waiting for the final
* animation to finish. Call wait_for_anims() to explicitly get this final
* wait (another call to proceed_to() or finish() will implicitly wait). The
* unit must remain valid until the wait is finished.
*/
void unit_mover::proceed_to(unit_ptr u, size_t path_index, bool update, bool wait)
{
// Nothing to do here if animations cannot be shown.
if ( !can_draw_ || !animate_ )
return;
// Handle pending visibility issues before introducing new ones.
wait_for_anims();
if ( update || !temp_unit_ptr_ )
// Replace the temp unit (which also hides u and shows our temporary).
replace_temporary(u);
else
{
// Just switch the display from the real unit to our fake one.
temp_unit_ptr_->set_hidden(false);
u->set_hidden(true);
}
// Safety check.
path_index = std::min(path_index, path_.size()-1);
for ( ; current_ < path_index; ++current_ )
// If the unit can be seen by the viewing side while making this step:
if ( !is_enemy_ || !temp_unit_ptr_->invisible(path_[current_]) ||
!temp_unit_ptr_->invisible(path_[current_+1]) )
{
// Wait for the previous step to complete before drawing the next one.
wait_for_anims();
if ( !disp_->tile_fully_on_screen(path_[current_]) ||
!disp_->tile_fully_on_screen(path_[current_+1]))
{
// prevent the unit from disappearing if we scroll here with i == 0
temp_unit_ptr_->set_location(path_[current_]);
disp_->invalidate(path_[current_]);
// scroll in as much of the remaining path as possible
if ( temp_unit_ptr_->anim_comp().get_animation() )
temp_unit_ptr_->anim_comp().get_animation()->pause_animation();
disp_->scroll_to_tiles(path_.begin() + current_,
path_.end(), game_display::ONSCREEN,
true, false, 0.0, force_scroll_);
if ( temp_unit_ptr_->anim_comp().get_animation() )
temp_unit_ptr_->anim_comp().get_animation()->restart_animation();
}
if ( tiles_adjacent(path_[current_], path_[current_+1]) )
wait_until_ =
move_unit_between(path_[current_], path_[current_+1],
temp_unit_ptr_.get_unit_ptr(), current_,
path_.size() - (current_+2), animator_,
*disp_);
else if ( path_[current_] != path_[current_+1] )
teleport_unit_between(path_[current_], path_[current_+1],
*temp_unit_ptr_, *disp_);
}
// Update the unit's facing.
u->set_facing(temp_unit_ptr_->facing());
u->anim_comp().set_standing(false); // Need to reset u's animation so the new facing takes effect.
// Remember the unit to unhide when the animation finishes.
shown_unit_ = u;
if ( wait )
wait_for_anims();
}