int main(int argc, char *argv[]) {
//
Teuchos::GlobalMPISession session(&argc, &argv, NULL);
//
typedef double ST;
typedef Teuchos::ScalarTraits<ST> SCT;
typedef SCT::magnitudeType MT;
typedef Epetra_MultiVector MV;
typedef Epetra_Operator OP;
typedef Belos::MultiVecTraits<ST,MV> MVT;
typedef Belos::OperatorTraits<ST,MV,OP> OPT;
using Teuchos::ParameterList;
using Teuchos::RCP;
using Teuchos::rcp;
bool verbose = false;
bool success = true;
try {
bool proc_verbose = false;
bool leftprec = true; // use left preconditioning to solve these linear systems
int frequency = -1; // how often residuals are printed by solver
int blocksize = 4;
int numrhs = 15;
int maxrestarts = 15; // number of restarts allowed
int length = 25;
int maxiters = -1; // maximum iterations allowed
std::string filename("orsirr1.hb");
MT tol = 1.0e-5; // relative residual tolerance
Teuchos::CommandLineProcessor cmdp(false,true);
cmdp.setOption("verbose","quiet",&verbose,"Print messages and results.");
cmdp.setOption("left-prec","right-prec",&leftprec,"Left preconditioning or right.");
cmdp.setOption("frequency",&frequency,"Solvers frequency for printing residuals (#iters).");
cmdp.setOption("filename",&filename,"Filename for Harwell-Boeing test matrix.");
cmdp.setOption("tol",&tol,"Relative residual tolerance used by GMRES solver.");
cmdp.setOption("num-rhs",&numrhs,"Number of right-hand sides to be solved for.");
cmdp.setOption("max-restarts",&maxrestarts,"Maximum number of restarts allowed for GMRES solver.");
cmdp.setOption("blocksize",&blocksize,"Block size used by GMRES.");
cmdp.setOption("maxiters",&maxiters,"Maximum number of iterations per linear system (-1 = adapted to problem/block size).");
cmdp.setOption("subspace-size",&length,"Dimension of Krylov subspace used by GMRES.");
if (cmdp.parse(argc,argv) != Teuchos::CommandLineProcessor::PARSE_SUCCESSFUL) {
return -1;
}
if (!verbose)
frequency = -1; // reset frequency if test is not verbose
//
// Get the problem
//
int MyPID;
RCP<Epetra_CrsMatrix> A;
int return_val =Belos::createEpetraProblem(filename,NULL,&A,NULL,NULL,&MyPID);
const Epetra_Map &Map = A->RowMap();
if(return_val != 0) return return_val;
proc_verbose = verbose && (MyPID==0); /* Only print on zero processor */
//
// *****Construct the Preconditioner*****
//
if (proc_verbose) std::cout << std::endl << std::endl;
if (proc_verbose) std::cout << "Constructing ILU preconditioner" << std::endl;
int Lfill = 2;
// if (argc > 2) Lfill = atoi(argv[2]);
if (proc_verbose) std::cout << "Using Lfill = " << Lfill << std::endl;
int Overlap = 2;
// if (argc > 3) Overlap = atoi(argv[3]);
if (proc_verbose) std::cout << "Using Level Overlap = " << Overlap << std::endl;
double Athresh = 0.0;
// if (argc > 4) Athresh = atof(argv[4]);
if (proc_verbose) std::cout << "Using Absolute Threshold Value of " << Athresh << std::endl;
double Rthresh = 1.0;
// if (argc >5) Rthresh = atof(argv[5]);
if (proc_verbose) std::cout << "Using Relative Threshold Value of " << Rthresh << std::endl;
//
Teuchos::RCP<Ifpack_IlukGraph> ilukGraph;
Teuchos::RCP<Ifpack_CrsRiluk> ilukFactors;
//
if (Lfill > -1) {
ilukGraph = Teuchos::rcp(new Ifpack_IlukGraph(A->Graph(), Lfill, Overlap));
int info = ilukGraph->ConstructFilledGraph();
assert( info == 0 );
ilukFactors = Teuchos::rcp(new Ifpack_CrsRiluk(*ilukGraph));
int initerr = ilukFactors->InitValues(*A);
if (initerr != 0) std::cout << "InitValues error = " << initerr;
info = ilukFactors->Factor();
assert( info == 0 );
}
//
bool transA = false;
double Cond_Est;
ilukFactors->Condest(transA, Cond_Est);
if (proc_verbose) {
std::cout << "Condition number estimate for this preconditoner = " << Cond_Est << std::endl;
std::cout << std::endl;
}
//
// Create the Belos preconditioned operator from the Ifpack preconditioner.
// NOTE: This is necessary because Belos expects an operator to apply the
// preconditioner with Apply() NOT ApplyInverse().
RCP<Belos::EpetraPrecOp> Prec = rcp( new Belos::EpetraPrecOp( ilukFactors ) );
//
// ********Other information used by block solver***********
// **************(can be user specified)********************
//
const int NumGlobalElements = Map.NumGlobalElements();
if (maxiters == -1)
maxiters = NumGlobalElements/blocksize - 1; // maximum number of iterations to run
//
ParameterList innerBelosList;
innerBelosList.set( "Solver", "BlockGmres" ); // Set the inner solver to use block Gmres
innerBelosList.set( "Num Blocks", length ); // Maximum number of blocks in Krylov factorization
innerBelosList.set( "Block Size", blocksize ); // Blocksize to be used by iterative solver
innerBelosList.set( "Maximum Iterations", maxiters ); // Maximum number of iterations allowed
innerBelosList.set( "Maximum Restarts", maxrestarts ); // Maximum number of restarts allowed
innerBelosList.set( "Convergence Tolerance", 1.0e-2 ); // Relative convergence tolerance requested
innerBelosList.set( "Verbosity", Belos::Errors + Belos::Warnings );
innerBelosList.set( "Timer Label", "Belos Preconditioner Solve" );// Choose a different label for the inner solve
//
// *****Construct linear problem using A and Prec*****
// ***The solution and RHS vectors will be set later**
Belos::LinearProblem<double,MV,OP> innerProblem;
innerProblem.setOperator( A );
if (leftprec)
innerProblem.setLeftPrec( Prec );
else
innerProblem.setRightPrec( Prec );
innerProblem.setLabel( "Belos Preconditioner Solve" );
//
// *****Create the inner block Gmres iteration********
//
RCP<Belos::EpetraOperator> innerSolver;
innerSolver = rcp( new Belos::EpetraOperator( rcp(&innerProblem,false) , rcp(&innerBelosList,false), true ) );
//
// *****Construct solution std::vector and random right-hand-sides *****
//
RCP<Epetra_MultiVector> X = rcp( new Epetra_MultiVector(Map, numrhs) );
X->PutScalar( 0.0 );
RCP<Epetra_MultiVector> B = rcp( new Epetra_MultiVector(Map, numrhs) );
B->Random();
Belos::LinearProblem<double,MV,OP> problem( A, X, B );
problem.setRightPrec( innerSolver );
problem.setLabel( "Belos Flexible Gmres Solve" );
bool set = problem.setProblem();
if (set == false) {
if (proc_verbose)
std::cout << std::endl << "ERROR: Belos::LinearProblem failed to set up correctly!" << std::endl;
return -1;
}
//
// Copy the list for the inner solver
//
Teuchos::ParameterList belosList( innerBelosList );
belosList.set( "Flexible Gmres" , true ); // Use flexible Gmres to solve this problem
belosList.set( "Timer Label", "Belos Flexible Gmres Solve" );// Choose a different label for the outer solve
belosList.set( "Convergence Tolerance", tol ); // Relative convergence tolerance requested
if (verbose) {
belosList.set( "Verbosity", Belos::Errors + Belos::Warnings +
Belos::TimingDetails + Belos::StatusTestDetails );
if (frequency > 0)
belosList.set( "Output Frequency", frequency );
}
//
// *******************************************************************
// **********Create the flexible, block Gmres iteration***************
// *******************************************************************
//
RCP< Belos::SolverManager<double,MV,OP> > solver;
solver = rcp( new Belos::BlockGmresSolMgr<double,MV,OP>( rcp(&problem,false), rcp(&belosList,false) ) );
//
//
// **********Print out information about problem*******************
//
if (proc_verbose) {
std::cout << std::endl << std::endl;
std::cout << "Dimension of matrix: " << NumGlobalElements << std::endl;
std::cout << "Number of right-hand sides: " << numrhs << std::endl;
std::cout << "Block size used by solver: " << blocksize << std::endl;
std::cout << "Number of restarts allowed: " << maxrestarts << std::endl;
std::cout << "Length of block Arnoldi factorization: " << length*blocksize << " ( "<< length << " blocks ) " <<std::endl;
std::cout << "Max number of Gmres iterations: " << maxiters << std::endl;
std::cout << "Relative residual tolerance: " << tol << std::endl;
std::cout << std::endl;
}
//
// Perform solve
//
Belos::ReturnType ret = solver->solve();
//
// Compute actual residuals.
//
bool badRes = false;
std::vector<double> actual_resids( numrhs );
std::vector<double> rhs_norm( numrhs );
Epetra_MultiVector R(Map, numrhs);
OPT::Apply( *A, *X, R );
MVT::MvAddMv( -1.0, R, 1.0, *B, R );
MVT::MvNorm( R, actual_resids );
MVT::MvNorm( *B, rhs_norm );
if (proc_verbose) {
std::cout<< "---------- Actual Residuals (normalized) ----------"<<std::endl<<std::endl;
for ( int i=0; i<numrhs; i++) {
double actRes = actual_resids[i]/rhs_norm[i];
std::cout<<"Problem "<<i<<" : \t"<< actRes <<std::endl;
if (actRes > tol ) badRes = true;
}
}
success = ret==Belos::Converged && !badRes;
if (success) {
if (proc_verbose)
std::cout << "End Result: TEST PASSED" << std::endl;
} else {
if (proc_verbose)
std::cout << "End Result: TEST FAILED" << std::endl;
}
}
TEUCHOS_STANDARD_CATCH_STATEMENTS(verbose,std::cerr,success);
return success ? EXIT_SUCCESS : EXIT_FAILURE;
} // end test_bl_fgmres_hb.cpp
/// actual computation
void PoissonSolver::computeField(VField_Edge_t & EFD,
VField_Cell_t & HFD,
VField_Edge_t & JFD,
const double & dt,
const double & tol,
const int & maxIterations)
{
Mesh_t & mesh = EFD.get_mesh();
FieldLayout<DIM> & FL = EFD.getLayout();
const NDIndex<DIM> lDom = FL.getLocalNDIndex();
_bunch.saveR();
const GCS_t & gcs = EFD.getGuardCellSizes();
Timings::startTimer(_setupTimer);
Epetra_Map* Map = getGlobalElements();
Teuchos::RCP<Epetra_Vector> LHS;
LHS = Teuchos::rcp(new Epetra_Vector(*Map));
Teuchos::RCP<Epetra_Vector> RHS;
RHS = Teuchos::rcp(new Epetra_Vector(*Map));
Teuchos::RCP<Epetra_CrsMatrix> A;
A = Teuchos::rcp(new Epetra_CrsMatrix(Copy, *Map, 5));
StencilGeometry(RHS, A);
// print("PoissonMatrix.dat", RHS, A);
Teuchos::ParameterList belosList;
belosList.set( "Maximum Iterations", maxIterations ); // Maximum number of iterations allowed
belosList.set( "Convergence Tolerance", tol );
belosList.set( "Verbosity", (Belos::Errors +
Belos::Warnings +
Belos::TimingDetails +
Belos::FinalSummary +
Belos::StatusTestDetails) );
Teuchos::ParameterList MLList;
SetupMLList(MLList);
Teuchos::RCP<ML_Epetra::MultiLevelPreconditioner> MLPrec =
Teuchos::rcp(new ML_Epetra::MultiLevelPreconditioner(*A, MLList,false));
MLPrec->ComputePreconditioner();
Teuchos::RCP<Belos::EpetraPrecOp> prec = Teuchos::rcp(new Belos::EpetraPrecOp(MLPrec));
Belos::LinearProblem<ST, MV, OP> problem;
problem.setOperator(A);
problem.setLHS(LHS);
problem.setRHS(RHS);
problem.setLeftPrec(prec);
if (!problem.isProblemSet()) {
if (!problem.setProblem()) {
std::cerr << "\nERROR: Belos::LinearProblem failed to set up correctly!" << std::endl;
}
}
Teuchos::RCP< Belos::SolverManager<ST, MV, OP> > solver;
solver = Teuchos::rcp( new Belos::BlockCGSolMgr<ST, MV, OP>(Teuchos::rcp(&problem, false), Teuchos::rcp(&belosList, false)));
Timings::stopTimer(_setupTimer);
BinaryVtkFile vtkFile;
SField_t rho(mesh, FL, gcs);
_bunch.drift_particles(dt / 2);
_bunch.scatterQ(rho);
_bunch.drift_particles(-dt / 2);
fillRHS(rho, RHS);
LHS->Random();
problem.setProblem(Teuchos::null, RHS);
Timings::startTimer(_solveTimer);
solver->solve();
Timings::stopTimer(_solveTimer);
plotPotential(vtkFile, LHS, EFD, 1);
fillFields(LHS, EFD, HFD, 1);
_bunch.move_by(Vector_t(-0.5 * _hr[0] / _gamma, 0.0));
_bunch.scatterQ(rho);
fillRHS(rho, RHS);
shiftLHS(rho, LHS, 1.0);
problem.setProblem(Teuchos::null, RHS);
belosList.set("Convergence Tolerance", 1e-6);
solver->setParameters(Teuchos::rcp(&belosList, false));
Timings::startTimer(_solveTimer);
solver->solve();
Timings::stopTimer(_solveTimer);
plotPotential(vtkFile, LHS, EFD, 2);
fillFields(LHS, EFD, HFD, 2);
_bunch.restoreR();
_bunch.scatterQ(rho);
vtkFile.addScalarField(rho, "rho");
JFD = 0.0;
JFD[lDom[0]][lDom[1]](0) += Physics::c * sqrt(1.0 - 1.0 / (_gamma * _gamma)) * rho[lDom[0]][lDom[1]];
fillRHS(rho, RHS);
shiftLHS(rho, LHS, -0.5);
problem.setProblem(Teuchos::null, RHS);
Timings::startTimer(_solveTimer);
solver->solve();
Timings::stopTimer(_solveTimer);
plotPotential(vtkFile, LHS, EFD, 0);
fillFields(LHS, EFD, HFD, 0);
vtkFile.writeFile("Data/potential");
delete Map;
}
