void FOOTPRINT_EDIT_FRAME::RestoreCopyFromUndoList( wxCommandEvent& aEvent )
{
if( UndoRedoBlocked() )
return;
if( GetScreen()->GetUndoCommandCount() <= 0 )
return;
// Inform tools that undo command was issued
TOOL_EVENT event( TC_MESSAGE, TA_UNDO_REDO, AS_GLOBAL );
m_toolManager->ProcessEvent( event );
if( UndoRedoBlocked() )
return;
// Save current module state in redo list
PICKED_ITEMS_LIST* lastcmd = new PICKED_ITEMS_LIST();
MODULE* module = GetBoard()->m_Modules.PopFront();
ITEM_PICKER wrapper( module, UR_MODEDIT );
KIGFX::VIEW* view = GetGalCanvas()->GetView();
lastcmd->PushItem( wrapper );
GetScreen()->PushCommandToRedoList( lastcmd );
view->Remove( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW::Remove, view, _1 ) );
// Retrieve last module state from undo list
lastcmd = GetScreen()->PopCommandFromUndoList();
wrapper = lastcmd->PopItem();
module = (MODULE*) wrapper.GetItem();
delete lastcmd;
if( module )
{
GetBoard()->Add( module, ADD_APPEND );
view->Add( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW::Add, view, _1 ) );
module->ViewUpdate();
}
SetCurItem( NULL );
OnModify();
m_canvas->Refresh();
}
void EDIT_TOOL::processChanges( const PICKED_ITEMS_LIST* aList )
{
KIGFX::VIEW* view = getView();
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
for( unsigned int i = 0; i < aList->GetCount(); ++i )
{
UNDO_REDO_T operation = aList->GetPickedItemStatus( i );
BOARD_ITEM* updItem = static_cast<BOARD_ITEM*>( aList->GetPickedItem( i ) );
switch( operation )
{
case UR_CHANGED:
ratsnest->Update( updItem );
// fall through
case UR_MODEDIT:
updItem->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
break;
case UR_DELETED:
if( updItem->Type() == PCB_MODULE_T )
static_cast<MODULE*>( updItem )->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove,
view, _1 ) );
view->Remove( updItem );
//ratsnest->Remove( updItem ); // this is done in BOARD::Remove
break;
case UR_NEW:
if( updItem->Type() == PCB_MODULE_T )
static_cast<MODULE*>( updItem )->RunOnChildren( boost::bind( &KIGFX::VIEW::Add,
view, _1 ) );
view->Add( updItem );
//ratsnest->Add( updItem ); // this is done in BOARD::Add
break;
default:
assert( false ); // Not handled
break;
}
}
}
int PCB_EDITOR_CONTROL::PlaceModule( const TOOL_EVENT& aEvent )
{
MODULE* module = NULL;
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
controls->ShowCursor( true );
controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_MODULE_BUTT, wxCURSOR_HAND, _( "Add footprint" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
VECTOR2I cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
{
if( module )
{
board->Delete( module ); // it was added by LoadModuleFromLibrary()
module = NULL;
preview.Clear();
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
controls->ShowCursor( true );
}
else
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( module && evt->Category() == TC_COMMAND )
{
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
module->Rotate( module->GetPosition(), m_frame->GetRotationAngle() );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
module->Flip( module->GetPosition() );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
if( !module )
{
// Pick the module to be placed
module = m_frame->LoadModuleFromLibrary( wxEmptyString,
m_frame->Prj().PcbFootprintLibs(),
true, NULL );
if( module == NULL )
continue;
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add all the drawable parts to preview
preview.Add( module );
module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else
{
// Place the selected module
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( module );
module->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( module, UR_NEW );
// Remove from preview
preview.Remove( module );
module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
module = NULL; // to indicate that there is no module that we currently modify
}
bool placing = ( module != NULL );
controls->SetAutoPan( placing );
controls->CaptureCursor( placing );
controls->ShowCursor( !placing );
}
else if( module && evt->IsMotion() )
{
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
controls->ShowCursor( false );
controls->SetSnapping( false );
controls->SetAutoPan( false );
controls->CaptureCursor( false );
view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
const wxString& aCmpFileName,
REPORTER* aReporter,
bool aChangeFootprints,
bool aDeleteUnconnectedTracks,
bool aDeleteExtraFootprints,
bool aSelectByTimeStamp,
bool aDeleteSinglePadNets,
bool aIsDryRun )
{
wxString msg;
NETLIST netlist;
KIGFX::VIEW* view = GetGalCanvas()->GetView();
BOARD* board = GetBoard();
std::vector<MODULE*> newFootprints;
// keep trace of the initial baord area, if we want to place new footprints
// outside the existinag board
EDA_RECT bbox = board->GetBoundingBox();
netlist.SetIsDryRun( aIsDryRun );
netlist.SetFindByTimeStamp( aSelectByTimeStamp );
netlist.SetDeleteExtraFootprints( aDeleteExtraFootprints );
netlist.SetReplaceFootprints( aChangeFootprints );
try
{
std::unique_ptr<NETLIST_READER> netlistReader( NETLIST_READER::GetNetlistReader(
&netlist, aNetlistFileName, aCmpFileName ) );
if( !netlistReader.get() )
{
msg.Printf( _( "Cannot open netlist file \"%s\"." ), GetChars( aNetlistFileName ) );
wxMessageBox( msg, _( "Netlist Load Error." ), wxOK | wxICON_ERROR, this );
return;
}
SetLastNetListRead( aNetlistFileName );
netlistReader->LoadNetlist();
LoadFootprints( netlist, aReporter );
}
catch( const IO_ERROR& ioe )
{
msg.Printf( _( "Error loading netlist.\n%s" ), ioe.What().GetData() );
wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );
return;
}
// Clear undo and redo lists to avoid inconsistencies between lists
if( !netlist.IsDryRun() )
GetScreen()->ClearUndoRedoList();
if( !netlist.IsDryRun() )
{
// Remove old modules
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
view->Remove( module );
}
}
// Clear selection, just in case a selected item has to be removed
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
netlist.SortByReference();
board->ReplaceNetlist( netlist, aDeleteSinglePadNets, &newFootprints, aReporter );
// If it was a dry run, nothing has changed so we're done.
if( netlist.IsDryRun() )
return;
if( IsGalCanvasActive() )
{
SpreadFootprints( &newFootprints, false, false, GetCrossHairPosition() );
if( !newFootprints.empty() )
{
for( MODULE* footprint : newFootprints )
{
m_toolManager->RunAction( PCB_ACTIONS::selectItem, true, footprint );
}
m_toolManager->InvokeTool( "pcbnew.InteractiveEdit" );
}
}
else
{
wxPoint placementAreaPosition;
// Place area to the left side of the board.
// if the board is empty, the bbox position is (0,0)
placementAreaPosition.x = bbox.GetEnd().x + Millimeter2iu( 10 );
placementAreaPosition.y = bbox.GetOrigin().y;
SpreadFootprints( &newFootprints, false, false, placementAreaPosition );
}
OnModify();
SetCurItem( NULL );
// Reload modules
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
view->Add( module );
}
if( aDeleteUnconnectedTracks && board->m_Track )
{
// Remove erroneous tracks. This should probably pushed down to the #BOARD object.
RemoveMisConnectedTracks();
}
// Rebuild the board connectivity:
board->GetConnectivity()->Build( board );
SetMsgPanel( board );
m_canvas->Refresh();
}
int POINT_EDITOR::OnSelectionChange( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
if( selection.Size() == 1 )
{
Activate();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
KIGFX::VIEW* view = getView();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
EDA_ITEM* item = selection.items.GetPickedItem( 0 );
m_editPoints = EDIT_POINTS_FACTORY::Make( item, getView()->GetGAL() );
if( !m_editPoints )
return 0;
view->Add( m_editPoints.get() );
m_editedPoint = NULL;
bool modified = false;
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
if( !m_editPoints ||
evt->Matches( m_selectionTool->ClearedEvent ) ||
evt->Matches( m_selectionTool->UnselectedEvent ) ||
evt->Matches( m_selectionTool->SelectedEvent ) )
{
break;
}
if( evt->IsMotion() )
{
EDIT_POINT* point = m_editPoints->FindPoint( evt->Position() );
if( m_editedPoint != point )
setEditedPoint( point );
}
else if( evt->IsAction( &COMMON_ACTIONS::pointEditorAddCorner ) )
{
addCorner( controls->GetCursorPosition() );
updatePoints();
}
else if( evt->IsAction( &COMMON_ACTIONS::pointEditorRemoveCorner ) )
{
if( m_editedPoint )
{
removeCorner( m_editedPoint );
updatePoints();
}
}
else if( evt->IsDrag( BUT_LEFT ) && m_editedPoint )
{
if( !modified )
{
// Save items, so changes can be undone
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
controls->ForceCursorPosition( false );
m_original = *m_editedPoint; // Save the original position
controls->SetAutoPan( true );
modified = true;
}
bool enableAltConstraint = !!evt->Modifier( MD_CTRL );
if( enableAltConstraint != (bool) m_altConstraint ) // alternative constraint
setAltConstraint( enableAltConstraint );
m_editedPoint->SetPosition( controls->GetCursorPosition() );
if( m_altConstraint )
m_altConstraint->Apply();
else
m_editedPoint->ApplyConstraint();
updateItem();
updatePoints();
m_editPoints->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::pointEditorUpdate ) )
{
updatePoints();
}
else if( evt->IsMouseUp( BUT_LEFT ) )
{
controls->SetAutoPan( false );
setAltConstraint( false );
modified = false;
m_toolMgr->PassEvent();
}
else if( evt->IsCancel() )
{
if( modified ) // Restore the last change
{
wxCommandEvent dummy;
editFrame->RestoreCopyFromUndoList( dummy );
updatePoints();
modified = false;
}
// Let the selection tool receive the event too
m_toolMgr->PassEvent();
break;
}
else
{
m_toolMgr->PassEvent();
}
}
if( m_editPoints )
{
finishItem();
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
view->Remove( m_editPoints.get() );
m_editPoints.reset();
}
controls->ShowCursor( false );
controls->SetAutoPan( false );
controls->SetSnapping( false );
controls->ForceCursorPosition( false );
}
return 0;
}
bool SELECTION_TOOL::selectMultiple()
{
bool cancelled = false; // Was the tool cancelled while it was running?
m_multiple = true; // Multiple selection mode is active
KIGFX::VIEW* view = getView();
getViewControls()->SetAutoPan( true );
SELECTION_AREA area;
view->Add( &area );
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsCancel() )
{
cancelled = true;
break;
}
if( evt->IsDrag( BUT_LEFT ) )
{
if( !m_additive )
clearSelection();
// Start drawing a selection box
area.SetOrigin( evt->DragOrigin() );
area.SetEnd( evt->Position() );
area.ViewSetVisible( true );
area.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
if( evt->IsMouseUp( BUT_LEFT ) )
{
// End drawing the selection box
area.ViewSetVisible( false );
// Mark items within the selection box as selected
std::vector<KIGFX::VIEW::LAYER_ITEM_PAIR> selectedItems;
BOX2I selectionBox = area.ViewBBox();
view->Query( selectionBox, selectedItems ); // Get the list of selected items
std::vector<KIGFX::VIEW::LAYER_ITEM_PAIR>::iterator it, it_end;
for( it = selectedItems.begin(), it_end = selectedItems.end(); it != it_end; ++it )
{
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( it->first );
// Add only those items that are visible and fully within the selection box
if( !item->IsSelected() && selectable( item ) &&
selectionBox.Contains( item->ViewBBox() ) )
{
select( item );
}
}
// Do not display information about selected item,as there is more than one
m_frame->SetCurItem( NULL );
if( !m_selection.Empty() )
{
// Inform other potentially interested tools
m_toolMgr->ProcessEvent( SelectedEvent );
}
break; // Stop waiting for events
}
}
// Stop drawing the selection box
area.ViewSetVisible( false );
view->Remove( &area );
m_multiple = false; // Multiple selection mode is inactive
getViewControls()->SetAutoPan( false );
return cancelled;
}
void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
const wxString& aCmpFileName,
REPORTER* aReporter,
bool aChangeFootprints,
bool aDeleteUnconnectedTracks,
bool aDeleteExtraFootprints,
bool aSelectByTimeStamp,
bool aDeleteSinglePadNets,
bool aIsDryRun )
{
wxString msg;
NETLIST netlist;
KIGFX::VIEW* view = GetGalCanvas()->GetView();
BOARD* board = GetBoard();
netlist.SetIsDryRun( aIsDryRun );
netlist.SetFindByTimeStamp( aSelectByTimeStamp );
netlist.SetDeleteExtraFootprints( aDeleteExtraFootprints );
netlist.SetReplaceFootprints( aChangeFootprints );
try
{
std::auto_ptr<NETLIST_READER> netlistReader( NETLIST_READER::GetNetlistReader(
&netlist, aNetlistFileName, aCmpFileName ) );
if( !netlistReader.get() )
{
msg.Printf( _( "Cannot open netlist file \"%s\"." ), GetChars( aNetlistFileName ) );
wxMessageBox( msg, _( "Netlist Load Error." ), wxOK | wxICON_ERROR, this );
return;
}
SetLastNetListRead( aNetlistFileName );
netlistReader->LoadNetlist();
loadFootprints( netlist, aReporter );
}
catch( const IO_ERROR& ioe )
{
msg.Printf( _( "Error loading netlist.\n%s" ), ioe.errorText.GetData() );
wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );
return;
}
// Clear undo and redo lists to avoid inconsistencies between lists
if( !netlist.IsDryRun() )
GetScreen()->ClearUndoRedoList();
if( !netlist.IsDryRun() )
{
// Remove old modules
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( module );
}
}
// Clear selection, just in case a selected item has to be removed
m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );
netlist.SortByReference();
board->ReplaceNetlist( netlist, aDeleteSinglePadNets, aReporter );
// If it was a dry run, nothing has changed so we're done.
if( netlist.IsDryRun() )
return;
OnModify();
SetCurItem( NULL );
// Reload modules
for( MODULE* module = board->m_Modules; module; module = module->Next() )
{
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( module );
module->ViewUpdate();
}
if( aDeleteUnconnectedTracks && board->m_Track )
{
// Remove erroneous tracks. This should probably pushed down to the #BOARD object.
RemoveMisConnectedTracks();
}
// Rebuild the board connectivity:
if( IsGalCanvasActive() )
board->GetRatsnest()->ProcessBoard();
Compile_Ratsnest( NULL, true );
SetMsgPanel( board );
m_canvas->Refresh();
}
void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand,
bool aRebuildRatsnet )
{
BOARD_ITEM* item;
bool not_found = false;
bool reBuild_ratsnest = false;
KIGFX::VIEW* view = GetGalCanvas()->GetView();
RN_DATA* ratsnest = GetBoard()->GetRatsnest();
// Undo in the reverse order of list creation: (this can allow stacked changes
// like the same item can be changes and deleted in the same complex command
bool build_item_list = true; // if true the list of existing items must be rebuilt
for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- )
{
item = (BOARD_ITEM*) aList->GetPickedItem( ii );
wxASSERT( item );
/* Test for existence of item on board.
* It could be deleted, and no more on board:
* - if a call to SaveCopyInUndoList was forgotten in Pcbnew
* - in zones outlines, when a change in one zone merges this zone with an other
* This test avoids a Pcbnew crash
* Obviously, this test is not made for deleted items
*/
UNDO_REDO_T status = aList->GetPickedItemStatus( ii );
if( status != UR_DELETED )
{
if( build_item_list )
// Build list of existing items, for integrity test
TestForExistingItem( GetBoard(), NULL );
build_item_list = false;
if( !TestForExistingItem( GetBoard(), item ) )
{
// Remove this non existent item
aList->RemovePicker( ii );
ii++; // the current item was removed, ii points now the next item
// decrement it because it will be incremented later
not_found = true;
continue;
}
}
item->ClearFlags();
// see if we must rebuild ratsnets and pointers lists
switch( item->Type() )
{
case PCB_MODULE_T:
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
reBuild_ratsnest = true;
break;
default:
break;
}
switch( aList->GetPickedItemStatus( ii ) )
{
case UR_CHANGED: /* Exchange old and new data for each item */
{
BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii );
// Remove all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* oldModule = static_cast<MODULE*>( item );
oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
ratsnest->Remove( item );
item->SwapData( image );
// Update all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
ratsnest->Add( item );
item->ClearFlags( SELECTED );
item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS );
}
break;
case UR_NEW: /* new items are deleted */
aList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->Remove( item );
if( item->Type() == PCB_MODULE_T )
{
MODULE* module = static_cast<MODULE*>( item );
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
view->Remove( item );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
break;
case UR_DELETED: /* deleted items are put in List, as new items */
aList->SetPickedItemStatus( UR_NEW, ii );
GetBoard()->Add( item );
if( item->Type() == PCB_MODULE_T )
{
MODULE* module = static_cast<MODULE*>( item );
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1) );
}
view->Add( item );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
build_item_list = true;
break;
case UR_MOVED:
item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_ROTATED:
item->Rotate( aList->m_TransformPoint,
aRedoCommand ? m_rotationAngle : -m_rotationAngle );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_ROTATED_CLOCKWISE:
item->Rotate( aList->m_TransformPoint,
aRedoCommand ? -m_rotationAngle : m_rotationAngle );
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
ratsnest->Update( item );
break;
case UR_FLIPPED:
item->Flip( aList->m_TransformPoint );
item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS );
ratsnest->Update( item );
break;
default:
{
wxString msg;
msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ),
aList->GetPickedItemStatus( ii ) );
wxMessageBox( msg );
}
break;
}
}
if( not_found )
wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) );
// Rebuild pointers and ratsnest that can be changed.
if( reBuild_ratsnest && aRebuildRatsnet )
{
if( IsGalCanvasActive() )
ratsnest->Recalculate();
else
Compile_Ratsnest( NULL, true );
}
}
int PCB_EDITOR_CONTROL::PlaceModule( const TOOL_EVENT& aEvent )
{
MODULE* module = NULL;
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
view->Add( &preview );
m_toolMgr->RunAction( PCB_ACTIONS::selectionClear, true );
controls->ShowCursor( true );
controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_MODULE_BUTT, wxCURSOR_HAND, _( "Add footprint" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
VECTOR2I cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
{
if( module )
{
delete module;
module = NULL;
preview.Clear();
controls->ShowCursor( true );
}
else
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( module && evt->Category() == TC_COMMAND )
{
if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) )
{
const auto rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle(
*m_frame, *evt );
module->Rotate( module->GetPosition(), rotationAngle );
view->Update( &preview );
}
else if( evt->IsAction( &PCB_ACTIONS::flip ) )
{
module->Flip( module->GetPosition() );
view->Update( &preview );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
if( !module )
{
// Pick the module to be placed
module = m_frame->LoadModuleFromLibrary( wxEmptyString,
m_frame->Prj().PcbFootprintLibs(),
true, NULL );
if( module == NULL )
continue;
// Module has been added in LoadModuleFromLibrary(),
// so we have to remove it before committing the change @todo LEGACY
board->Remove( module );
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add all the drawable parts to preview
preview.Add( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
}
else
{
BOARD_COMMIT commit( m_frame );
commit.Add( module );
commit.Push( _( "Place a module" ) );
// Remove from preview
preview.Remove( module );
module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
module = NULL; // to indicate that there is no module that we currently modify
}
bool placing = ( module != NULL );
controls->SetAutoPan( placing );
controls->CaptureCursor( placing );
controls->ShowCursor( !placing );
}
else if( module && evt->IsMotion() )
{
module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
view->Update( &preview );
}
}
view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
void BOARD_COMMIT::Push( const wxString& aMessage, bool aCreateUndoEntry, bool aSetDirtyBit )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
auto connectivity = board->GetConnectivity();
std::set<EDA_ITEM*> savedModules;
std::vector<BOARD_ITEM*> itemsToDeselect;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
wxASSERT( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
wxASSERT( ent.m_item->Type() == PCB_MODULE_T );
wxASSERT( ent.m_copy->Type() == PCB_MODULE_T );
if( aCreateUndoEntry )
{
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
}
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
if( aCreateUndoEntry )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
}
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem ); // handles connectivity
}
else
{
// modules inside modules are not supported yet
wxASSERT( boardItem->Type() != PCB_MODULE_T );
boardItem->SetParent( board->m_Modules.GetFirst() );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules && aCreateUndoEntry )
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
// This level can only handle module items when editing modules
if( !m_editModules )
break;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
// don't allow deletion of Reference or Value
if( text->GetType() != TEXTE_MODULE::TEXT_is_DIVERS )
break;
}
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
wxASSERT( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
break;
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_AREA_T:
itemsToDeselect.push_back( boardItem );
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
break;
case PCB_MODULE_T:
{
itemsToDeselect.push_back( boardItem );
// There are no modules inside a module yet
wxASSERT( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
view->Remove( module );
module->ClearFlags();
if( !( changeFlags & CHT_DONE ) )
board->Remove( module ); // handles connectivity
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
wxASSERT( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules && aCreateUndoEntry )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
wxASSERT( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
if( ent.m_copy )
connectivity->MarkItemNetAsDirty( static_cast<BOARD_ITEM*>( ent.m_copy ) );
connectivity->Update( boardItem );
view->Update( boardItem );
// if no undo entry is needed, the copy would create a memory leak
if( !aCreateUndoEntry )
delete ent.m_copy;
break;
}
default:
wxASSERT( false );
break;
}
}
// Removing an item should trigger the unselect action
// but only after all items are removed otherwise we can get
// flickering depending on the system
if( itemsToDeselect.size() > 0 )
m_toolMgr->RunAction( PCB_ACTIONS::unselectItems, true, &itemsToDeselect );
if( !m_editModules && aCreateUndoEntry )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
if( TOOL_MANAGER* toolMgr = frame->GetToolManager() )
toolMgr->PostEvent( { TC_MESSAGE, TA_MODEL_CHANGE, AS_GLOBAL } );
if ( !m_editModules )
{
auto panel = static_cast<PCB_DRAW_PANEL_GAL*>( frame->GetGalCanvas() );
connectivity->RecalculateRatsnest();
connectivity->ClearDynamicRatsnest();
panel->RedrawRatsnest();
}
if( aSetDirtyBit )
frame->OnModify();
frame->UpdateMsgPanel();
clear();
}
void BOARD_COMMIT::Revert()
{
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
auto connectivity = board->GetConnectivity();
for( auto it = m_changes.rbegin(); it != m_changes.rend(); ++it )
{
COMMIT_LINE& ent = *it;
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( ent.m_item );
BOARD_ITEM* copy = static_cast<BOARD_ITEM*>( ent.m_copy );
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
switch( changeType )
{
case CHT_ADD:
if( !( changeFlags & CHT_DONE ) )
break;
view->Remove( item );
connectivity->Remove( item );
board->Remove( item );
break;
case CHT_REMOVE:
if( !( changeFlags & CHT_DONE ) )
break;
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( std::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) );
}
view->Add( item );
connectivity->Add( item );
board->Add( item );
break;
case CHT_MODIFY:
{
view->Remove( item );
connectivity->Remove( item );
item->SwapData( copy );
item->ClearFlags( SELECTED );
// Update all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( std::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) );
}
view->Add( item );
connectivity->Add( item );
delete copy;
break;
}
default:
wxASSERT( false );
break;
}
}
if ( !m_editModules )
connectivity->RecalculateRatsnest();
clear();
}
void BOARD_COMMIT::Push( const wxString& aMessage )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
RN_DATA* ratsnest = board->GetRatsnest();
std::set<EDA_ITEM*> savedModules;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
assert( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
assert( ent.m_item->Type() == PCB_MODULE_T );
assert( ent.m_copy->Type() == PCB_MODULE_T );
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem );
//ratsnest->Add( boardItem ); // TODO currently done by BOARD::Add()
if( boardItem->Type() == PCB_MODULE_T )
{
MODULE* mod = static_cast<MODULE*>( boardItem );
mod->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
}
else
{
// modules inside modules are not supported yet
assert( boardItem->Type() != PCB_MODULE_T );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
}
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
{
// Do not allow footprint text removal when not editing a module
if( !m_editModules )
break;
bool remove = true;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
switch( text->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE:
//DisplayError( frame, _( "Cannot delete component reference." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_VALUE:
//DisplayError( frame, _( "Cannot delete component value." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_DIVERS: // suppress warnings
break;
default:
assert( false );
break;
}
}
if( remove )
{
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
assert( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
}
break;
}
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
case PCB_ZONE_AREA_T:
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
//ratsnest->Remove( boardItem ); // currently done by BOARD::Remove()
break;
case PCB_MODULE_T:
{
// There are no modules inside a module yet
assert( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
module->ClearFlags();
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( module );
if( !( changeFlags & CHT_DONE ) )
board->Remove( module );
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
assert( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
assert( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
boardItem->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
ratsnest->Update( boardItem );
break;
}
default:
assert( false );
break;
}
}
if( !m_editModules )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
frame->OnModify();
ratsnest->Recalculate();
clear();
}
void BOARD_COMMIT::Revert()
{
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
RN_DATA* ratsnest = board->GetRatsnest();
for( auto it = m_changes.rbegin(); it != m_changes.rend(); ++it )
{
COMMIT_LINE& ent = *it;
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( ent.m_item );
BOARD_ITEM* copy = static_cast<BOARD_ITEM*>( ent.m_copy );
switch( ent.m_type )
{
case CHT_ADD:
if( item->Type() == PCB_MODULE_T )
{
MODULE* oldModule = static_cast<MODULE*>( item );
oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
view->Remove( item );
ratsnest->Remove( item );
break;
case CHT_REMOVE:
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( boost::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) );
newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
view->Add( item );
ratsnest->Add( item );
break;
case CHT_MODIFY:
{
if( item->Type() == PCB_MODULE_T )
{
MODULE* oldModule = static_cast<MODULE*>( item );
oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
}
view->Remove( item );
ratsnest->Remove( item );
item->SwapData( copy );
item->ClearFlags( SELECTED );
// Update all pads/drawings/texts, as they become invalid
// for the VIEW after SwapData() called for modules
if( item->Type() == PCB_MODULE_T )
{
MODULE* newModule = static_cast<MODULE*>( item );
newModule->RunOnChildren( boost::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) );
newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
view->Add( item );
ratsnest->Add( item );
delete copy;
break;
}
default:
assert( false );
break;
}
}
ratsnest->Recalculate();
clear();
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
if( pcbframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
source_module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( source_module );
}
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
if( pcbframe->IsGalCanvasActive() )
{
RN_DATA* ratsnest = pcbframe->GetBoard()->GetRatsnest();
ratsnest->Update( newmodule );
ratsnest->Recalculate();
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
newmodule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( newmodule );
pcbframe->GetGalCanvas()->ForceRefresh();
}
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetBoard()->m_Modules.GetFirst()->ViewUpdate();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
bool PL_SELECTION_TOOL::selectMultiple()
{
bool cancelled = false; // Was the tool cancelled while it was running?
m_multiple = true; // Multiple selection mode is active
KIGFX::VIEW* view = getView();
KIGFX::PREVIEW::SELECTION_AREA area;
view->Add( &area );
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsAction( &ACTIONS::cancelInteractive ) || evt->IsActivate() || evt->IsCancel() )
{
cancelled = true;
break;
}
if( evt->IsDrag( BUT_LEFT ) )
{
// Start drawing a selection box
area.SetOrigin( evt->DragOrigin() );
area.SetEnd( evt->Position() );
area.SetAdditive( m_additive );
area.SetSubtractive( m_subtractive );
view->SetVisible( &area, true );
view->Update( &area );
getViewControls()->SetAutoPan( true );
}
if( evt->IsMouseUp( BUT_LEFT ) )
{
getViewControls()->SetAutoPan( false );
// End drawing the selection box
view->SetVisible( &area, false );
int width = area.GetEnd().x - area.GetOrigin().x;
int height = area.GetEnd().y - area.GetOrigin().y;
/* Selection mode depends on direction of drag-selection:
* Left > Right : Select objects that are fully enclosed by selection
* Right > Left : Select objects that are crossed by selection
*/
bool windowSelection = width >= 0 ? true : false;
// Construct an EDA_RECT to determine EDA_ITEM selection
EDA_RECT selectionRect( (wxPoint)area.GetOrigin(), wxSize( width, height ) );
selectionRect.Normalize();
for( WS_DATA_ITEM* dataItem : WS_DATA_MODEL::GetTheInstance().GetItems() )
{
for( WS_DRAW_ITEM_BASE* item : dataItem->GetDrawItems() )
{
if( item->HitTest( selectionRect, windowSelection ) )
{
if( m_subtractive )
unselect( item );
else
select( item );
}
}
}
// Inform other potentially interested tools
if( !m_selection.Empty() )
m_toolMgr->ProcessEvent( EVENTS::SelectedEvent );
break; // Stop waiting for events
}
}
getViewControls()->SetAutoPan( false );
// Stop drawing the selection box
view->Remove( &area );
m_multiple = false; // Multiple selection mode is inactive
if( !cancelled )
m_selection.ClearReferencePoint();
return cancelled;
}
int PCB_EDITOR_CONTROL::PlaceTarget( const TOOL_EVENT& aEvent )
{
KIGFX::VIEW* view = getView();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
BOARD* board = getModel<BOARD>();
PCB_TARGET* target = new PCB_TARGET( board );
// Init the new item attributes
target->SetLayer( Edge_Cuts );
target->SetWidth( board->GetDesignSettings().m_EdgeSegmentWidth );
target->SetSize( Millimeter2iu( 5 ) );
VECTOR2I cursorPos = controls->GetCursorPosition();
target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( view );
preview.Add( target );
view->Add( &preview );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
controls->SetSnapping( true );
Activate();
m_frame->SetToolID( ID_PCB_MIRE_BUTT, wxCURSOR_PENCIL, _( "Add layer alignment target" ) );
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = controls->GetCursorPosition();
if( evt->IsCancel() || evt->IsActivate() )
break;
else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
{
target->SetWidth( target->GetWidth() + WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
{
int width = target->GetWidth();
if( width > WIDTH_STEP )
{
target->SetWidth( width - WIDTH_STEP );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
assert( target->GetSize() > 0 );
assert( target->GetWidth() > 0 );
view->Add( target );
board->Add( target );
target->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( target, UR_NEW );
preview.Remove( target );
// Create next PCB_TARGET
target = new PCB_TARGET( *target );
preview.Add( target );
}
else if( evt->IsMotion() )
{
target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
delete target;
controls->SetSnapping( false );
view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
int PCB_EDITOR_CONTROL::ZoneMerge( const TOOL_EVENT& aEvent )
{
SELECTION selection = m_toolMgr->GetTool<SELECTION_TOOL>()->GetSelection();
BOARD* board = getModel<BOARD>();
RN_DATA* ratsnest = board->GetRatsnest();
KIGFX::VIEW* view = getView();
if( selection.Size() < 2 )
return 0;
PICKED_ITEMS_LIST changes;
int netcode = -1;
// Loop through all combinations
for( int ia1 = 0; ia1 < selection.Size() - 1; ++ia1 )
{
ZONE_CONTAINER* curr_area = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia1 ) );
if( !curr_area )
continue;
netcode = curr_area->GetNetCode();
EDA_RECT b1 = curr_area->Outline()->GetBoundingBox();
bool mod_ia1 = false;
for( int ia2 = selection.Size() - 1; ia2 > ia1; --ia2 )
{
ZONE_CONTAINER* area2 = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia2 ) );
if( !area2 )
continue;
if( area2->GetNetCode() != netcode )
continue;
if( curr_area->GetPriority() != area2->GetPriority() )
continue;
if( curr_area->GetIsKeepout() != area2->GetIsKeepout() )
continue;
if( curr_area->GetLayer() != area2->GetLayer() )
continue;
EDA_RECT b2 = area2->Outline()->GetBoundingBox();
if( b1.Intersects( b2 ) )
{
EDA_ITEM* backup = curr_area->Clone();
bool ret = board->TestAreaIntersection( curr_area, area2 );
if( ret && board->CombineAreas( &changes, curr_area, area2 ) )
{
mod_ia1 = true;
selection.items.RemovePicker( ia2 );
ITEM_PICKER picker( curr_area, UR_CHANGED );
picker.SetLink( backup );
changes.PushItem( picker );
}
else
{
delete backup;
}
}
}
if( mod_ia1 )
--ia1; // if modified, we need to check it again
}
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_frame->SaveCopyInUndoList( changes, UR_UNSPECIFIED );
for( unsigned i = 0; i < changes.GetCount(); ++i )
{
ITEM_PICKER picker = changes.GetItemWrapper( i );
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( picker.GetItem() );
if( picker.GetStatus() == UR_DELETED )
{
view->Remove( item );
ratsnest->Remove( item );
}
else if( picker.GetStatus() == UR_CHANGED )
{
item->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, item );
}
}
return 0;
}
bool GERBVIEW_SELECTION_TOOL::selectMultiple()
{
bool cancelled = false; // Was the tool cancelled while it was running?
m_multiple = true; // Multiple selection mode is active
KIGFX::VIEW* view = getView();
getViewControls()->SetAutoPan( true );
KIGFX::PREVIEW::SELECTION_AREA area;
view->Add( &area );
while( OPT_TOOL_EVENT evt = Wait() )
{
if( evt->IsCancel() )
{
cancelled = true;
break;
}
if( evt->IsDrag( BUT_LEFT ) )
{
// Start drawing a selection box
area.SetOrigin( evt->DragOrigin() );
area.SetEnd( evt->Position() );
area.SetAdditive( m_additive );
area.SetSubtractive( m_subtractive );
view->SetVisible( &area, true );
view->Update( &area );
}
if( evt->IsMouseUp( BUT_LEFT ) )
{
// End drawing the selection box
view->SetVisible( &area, false );
// Mark items within the selection box as selected
std::vector<KIGFX::VIEW::LAYER_ITEM_PAIR> selectedItems;
// Filter the view items based on the selection box
BOX2I selectionBox = area.ViewBBox();
view->Query( selectionBox, selectedItems ); // Get the list of selected items
std::vector<KIGFX::VIEW::LAYER_ITEM_PAIR>::iterator it, it_end;
int width = area.GetEnd().x - area.GetOrigin().x;
int height = area.GetEnd().y - area.GetOrigin().y;
// Construct an EDA_RECT to determine EDA_ITEM selection
EDA_RECT selectionRect( wxPoint( area.GetOrigin().x, area.GetOrigin().y ),
wxSize( width, height ) );
selectionRect.Normalize();
for( it = selectedItems.begin(), it_end = selectedItems.end(); it != it_end; ++it )
{
auto item = static_cast<GERBER_DRAW_ITEM*>( it->first );
if( !item || !selectable( item ) )
continue;
/* Selection mode depends on direction of drag-selection:
* Left > Right : Select objects that are fully enclosed by selection
* Right > Left : Select objects that are crossed by selection
*/
if( width >= 0 )
{
if( selectionBox.Contains( item->ViewBBox() ) )
{
if( m_subtractive )
unselect( item );
else
select( item );
}
}
else
{
if( item->HitTest( selectionRect ) )
{
if( m_subtractive )
unselect( item );
else
select( item );
}
}
}
if( m_selection.Size() == 1 )
m_frame->SetCurItem( static_cast<GERBER_DRAW_ITEM*>( m_selection.Front() ) );
else
m_frame->SetCurItem( NULL );
// Inform other potentially interested tools
if( !m_selection.Empty() )
m_toolMgr->ProcessEvent( SelectedEvent );
break; // Stop waiting for events
}
}
// Stop drawing the selection box
view->Remove( &area );
m_multiple = false; // Multiple selection mode is inactive
getViewControls()->SetAutoPan( false );
return cancelled;
}
