unsigned int PhysicsEngine::addUserVehicle(const osg::Vec3f& pos, const osg::Vec3f& sizes, const osg::Quat& orient, float mass)
{
assert(OpenThreads::Thread::CurrentThread() == m_physicsThread);
if (! m_vehicleShape)
m_vehicleShape = new btBoxShape(btVector3(sizes.x() / 2, sizes.y() / 2, sizes.z() / 2));
//m_collisionShapes.push_back(m_vehicleShape);
btTransform startTransform;
startTransform.setIdentity();
startTransform.setRotation(btQuaternion(orient.x(), orient.y(), orient.z(), orient.w()));
startTransform.setOrigin(btVector3(pos.x(), pos.y(), pos.z()));
VehicleMotionState* motionState = new VehicleMotionState(this, m_nextUsedId, startTransform);
btVector3 inertia;
m_vehicleShape->calculateLocalInertia(mass, inertia);
btRigidBody* body = new btRigidBody(mass, motionState, m_vehicleShape, inertia);
m_vehicles[m_nextUsedId] = body;
++m_nextUsedId;
body->setDamping(0.5f, 0.7f);
m_physicsWorld->addRigidBody(body, COLLISION_SHIPGROUP, COLLISION_SHIPGROUP | COLLISION_ASTEROIDGROUP);
return m_nextUsedId - 1;
}
void ActorTracer::findGround(const Actor* actor, const osg::Vec3f& start, const osg::Vec3f& end, const btCollisionWorld* world)
{
const btVector3 btstart(start.x(), start.y(), start.z());
const btVector3 btend(end.x(), end.y(), end.z());
const btTransform &trans = actor->getCollisionObject()->getWorldTransform();
btTransform from(trans.getBasis(), btstart);
btTransform to(trans.getBasis(), btend);
ClosestNotMeConvexResultCallback newTraceCallback(actor->getCollisionObject(), btstart-btend, btScalar(0.0));
// Inherit the actor's collision group and mask
newTraceCallback.m_collisionFilterGroup = actor->getCollisionObject()->getBroadphaseHandle()->m_collisionFilterGroup;
newTraceCallback.m_collisionFilterMask = actor->getCollisionObject()->getBroadphaseHandle()->m_collisionFilterMask;
newTraceCallback.m_collisionFilterMask &= ~CollisionType_Actor;
world->convexSweepTest(actor->getConvexShape(), from, to, newTraceCallback);
if(newTraceCallback.hasHit())
{
const btVector3& tracehitnormal = newTraceCallback.m_hitNormalWorld;
mFraction = newTraceCallback.m_closestHitFraction;
mPlaneNormal = osg::Vec3f(tracehitnormal.x(), tracehitnormal.y(), tracehitnormal.z());
mEndPos = (end-start)*mFraction + start;
}
else
{
mEndPos = end;
mPlaneNormal = osg::Vec3f(0.0f, 0.0f, 1.0f);
mFraction = 1.0f;
}
}
osg::Vec4f Raytracer::renderPixel(int x, int y, const osg::Vec3f& eye, const osg::Vec3f& dir)
{
osg::Vec3f lightPos(-338.572, 0, 400);
RTCRay ray;
ray.primID = RTC_INVALID_GEOMETRY_ID;
ray.geomID = RTC_INVALID_GEOMETRY_ID;
ray.instID = RTC_INVALID_GEOMETRY_ID;
ray.tnear = 0.0f;
ray.tfar = 100000.0f;
ray.org[0] = eye.x();
ray.org[1] = eye.y();
ray.org[2] = eye.z();
ray.dir[0]= dir.x();
ray.dir[1] = dir.y();
ray.dir[2] = dir.z();
rtcIntersect(_scene, ray);
if(ray.primID != -1)
{
osg::Vec3f pos = eye + dir*ray.tfar;
osg::Vec4f diffuse = getSurfaceColor(ray.geomID, ray.primID,ray.u,ray.v);
osg::Vec3 normal = getNormal(ray.geomID,ray.primID,ray.u,ray.v);
osg::Vec3f lightDir = lightPos - pos;
lightDir.normalize();
float NdotL = std::max(normal * lightDir,0.0f);
return diffuse * NdotL;
}
return _backgroundColor;
}
//***********************************************************
//FUNCTION:
void CPickNode::__drawCoordinateLine(const osg::Vec3f& vOrigin, float vLength, osg::ref_ptr<osg::Geode>& vLineNode)
{
osg::ref_ptr<osg::Geometry> CoordGeometry = new osg::Geometry();
osg::ref_ptr<osg::Vec3Array> CoordVertex = new osg::Vec3Array();
CoordVertex->push_back(vOrigin);
CoordVertex->push_back(osg::Vec3(vOrigin.x()+vLength, vOrigin.y(), vOrigin.z()));
CoordVertex->push_back(vOrigin);
CoordVertex->push_back(osg::Vec3(vOrigin.x(), vOrigin.y()+vLength, vOrigin.z()));
CoordVertex->push_back(vOrigin);
CoordVertex->push_back(osg::Vec3(vOrigin.x(), vOrigin.y(), vOrigin.z()+vLength));
CoordGeometry->setVertexArray(CoordVertex.get());
CoordGeometry->addPrimitiveSet(new osg::DrawArrays(osg::PrimitiveSet::LINES, 0, 6));
osg::ref_ptr<osg::Vec4Array> VertColor = new osg::Vec4Array();
VertColor->push_back(osg::Vec4(1.0, 0.0, 0.0, 1.0));
VertColor->push_back(osg::Vec4(1.0, 0.0, 0.0, 1.0));
VertColor->push_back(osg::Vec4(0.0, 1.0, 0.0, 1.0));
VertColor->push_back(osg::Vec4(0.0, 1.0, 0.0, 1.0));
VertColor->push_back(osg::Vec4(0.0, 0.0, 1.0, 1.0));
VertColor->push_back(osg::Vec4(0.0, 0.0, 1.0, 1.0));
CoordGeometry->setColorArray(VertColor.get());
CoordGeometry->setColorBinding(osg::Geometry::BIND_PER_VERTEX);
osg::ref_ptr<osg::LineWidth> LineSize = new osg::LineWidth();
LineSize->setWidth(5);
vLineNode->getOrCreateStateSet()->setAttributeAndModes(LineSize.get(), osg::StateAttribute::ON);
vLineNode->addDrawable(CoordGeometry.get());
}
//***********************************************************
//FUNCTION:
void CPickNode::__drawCoordinateMask(const osg::Vec3f& vOrigin, float vLength, osg::ref_ptr<osg::Geode>& vMaskNode)
{
osg::ref_ptr<osg::Geometry> MakGeom = new osg::Geometry();
osg::ref_ptr<osg::Vec3Array> MaskVert = new osg::Vec3Array();
for (unsigned int i=1; i<=10; i++)
{
float Offfset = vLength / 10.0 * i;
MaskVert->push_back(osg::Vec3(vOrigin.x()+Offfset, vOrigin.y(), vOrigin.z()));
MaskVert->push_back(osg::Vec3(vOrigin.x(), vOrigin.y()+Offfset, vOrigin.z()));
MaskVert->push_back(osg::Vec3(vOrigin.x(), vOrigin.y(), vOrigin.z()+Offfset));
}
osg::ref_ptr<osg::Vec4Array> ColorArray = new osg::Vec4Array;
ColorArray->push_back(osg::Vec4(1.0, 1.0, 1.0, 1.0));
MakGeom->setVertexArray(MaskVert.get());
MakGeom->setColorArray(ColorArray);
MakGeom->setColorBinding(osg::Geometry::BIND_OVERALL);
MakGeom->addPrimitiveSet(new osg::DrawArrays(osg::PrimitiveSet::POINTS, 0, 30));
vMaskNode->addDrawable(MakGeom.get());
osg::ref_ptr<osg::Point> PointSize = new osg::Point(5.0);
osg::ref_ptr<osg::StateSet> PointStateSet = vMaskNode->getOrCreateStateSet();
PointStateSet->setAttribute(PointSize);
}
bool ShapeVisitor_RestrictedPositionGetter::insideCube( const osg::Vec3f& center, const osg::Vec3f& surfaceX, const osg::Vec3f& surfaceY, const osg::Vec3f& surfaceZ, osg::Vec3f& point )
{
float distanceX = fabsf( ( center - surfaceX ).x() );
float distanceY = fabsf( ( center - surfaceY ).y() );
float distanceZ = fabsf( ( center - surfaceZ ).z() );
return ( point.x() > center.x() - distanceX && point.x() < center.x() + distanceX &&
point.y() > center.y() - distanceY && point.y() < center.y() + distanceY &&
point.z() > center.z() - distanceZ && point.z() < center.z() + distanceZ );
}
const osg::Vec3f Stars::sRgbColor(const osg::Vec3f xyzTristimulus)
{
// (The Colors of the Stars - Olson - 1998) - sRGB matrix - feel free to use other matrices here...
const float r = 3.24 * xyzTristimulus.x() -1.537 * xyzTristimulus.y() -0.499 * xyzTristimulus.z();
const float g = -0.969 * xyzTristimulus.x() +1.876 * xyzTristimulus.y() +0.042 * xyzTristimulus.z();
const float b = 0.056 * xyzTristimulus.x() -0.204 * xyzTristimulus.y() +1.057 * xyzTristimulus.z();
return osg::Vec3f(r, g, b);
}
osg::Vec3f ShapeVisitor_RestrictedPositionGetter::toCube( const osg::Vec3f& center, const osg::Vec3f& surfaceX, const osg::Vec3f& surfaceY, const osg::Vec3f& surfaceZ, const osg::Vec3f& point )
{
float distanceX = std::fabs( ( center - surfaceX ).x() );
float distanceY = std::fabs( ( center - surfaceY ).y() );
float distanceZ = std::fabs( ( center - surfaceZ ).z() );
// nearest_point_on_box(x, y, z, box_min_x, box_min_y, box_min_z, box_max_x, box_max_y, box_max_z)
float x = /*point.x() -*/ median( point.x(), center.x() - distanceX, center.x() + distanceX );
float y = /*point.y() -*/ median( point.y(), center.y() - distanceY, center.y() + distanceY );
float z = /*point.z() -*/ median( point.z(), center.z() - distanceZ, center.z() + distanceZ );
return osg::Vec3f( x,y,z );
}
GameInstanceServer::ChunkCoordinates GameInstanceServer::positionToChunk(const osg::Vec3f& pos)
{
return ChunkCoordinates(
std::floor(pos.x() / chunksize),
std::floor(pos.y() / chunksize),
std::floor(pos.z() / chunksize));
}
void Storage::fixNormal (osg::Vec3f& normal, int cellX, int cellY, int col, int row)
{
while (col >= ESM::Land::LAND_SIZE-1)
{
++cellY;
col -= ESM::Land::LAND_SIZE-1;
}
while (row >= ESM::Land::LAND_SIZE-1)
{
++cellX;
row -= ESM::Land::LAND_SIZE-1;
}
while (col < 0)
{
--cellY;
col += ESM::Land::LAND_SIZE-1;
}
while (row < 0)
{
--cellX;
row += ESM::Land::LAND_SIZE-1;
}
ESM::Land* land = getLand(cellX, cellY);
if (land && land->mDataTypes&ESM::Land::DATA_VNML)
{
normal.x() = land->mLandData->mNormals[col*ESM::Land::LAND_SIZE*3+row*3];
normal.y() = land->mLandData->mNormals[col*ESM::Land::LAND_SIZE*3+row*3+1];
normal.z() = land->mLandData->mNormals[col*ESM::Land::LAND_SIZE*3+row*3+2];
normal.normalize();
}
else
normal = osg::Vec3f(0,0,1);
}
unsigned int PhysicsEngine::addCollisionSphere(osg::Vec3f pos, float radius, float mass)
{
assert(OpenThreads::Thread::CurrentThread() == m_physicsThread);
btSphereShape* newShape = new btSphereShape(radius);
m_collisionShapes.push_back(newShape);
btTransform initialTransform;
initialTransform.setIdentity();
initialTransform.setOrigin(btVector3(pos.x(), pos.y(), pos.z()));
//btMotionState* motionState = new btDefaultMotionState(initialTransform);
//btVector3 inertia;
//newShape->calculateLocalInertia(0.0, inertia);
// TODO: upgrade to the rigid body status?
btCollisionObject* newBody = new btCollisionObject;
newBody->setCollisionShape(newShape);
newBody->setWorldTransform(initialTransform);
m_collisionObjects.insert(std::make_pair(m_nextUsedId, newBody));
++m_nextUsedId;
m_physicsWorld->addCollisionObject(newBody, COLLISION_ASTEROIDGROUP, COLLISION_SHIPGROUP);
return m_nextUsedId - 1;
}
std::string toString(const osg::Vec3f &value)
{
std::stringstream str;
str << value.x() << " " << value.y() << " " << value.z();
return str.str();
}
osg::Vec3f CoordinateConverter::toLocalVec3(const osg::Vec3f& point)
{
return osg::Vec3f(
point.x() - static_cast<float>(mCellX),
point.y() - static_cast<float>(mCellY),
point.z()
);
}
void RippleSimulation::emitRipple(const osg::Vec3f &pos)
{
if (std::abs(pos.z() - mParticleNode->getPosition().z()) < 20)
{
osgParticle::Particle* p = mParticleSystem->createParticle(NULL);
p->setPosition(osg::Vec3f(pos.x(), pos.y(), 0.f));
p->setAngle(osg::Vec3f(0,0, Misc::Rng::rollProbability() * osg::PI * 2 - osg::PI));
}
}
/*
Linearly interpolate the position where an isosurface cuts
an edge between two vertices, each with their own scalar value
*/
osg::Vec3f VertexInterp(double isolevel, osg::Vec3f p1, osg::Vec3f p2, double valp1, double valp2)
{
double mu;
osg::Vec3f p;
if (ABS(isolevel-valp1) < 0.00001)
return p1;
if (ABS(isolevel-valp2) < 0.00001)
return p2;
if (ABS(valp1-valp2) < 0.00001)
return p1;
mu = (isolevel - valp1) / (valp2 - valp1);
p.set(p1.x() + mu * (p2.x() - p1.x()),
p1.y() + mu * (p2.y() - p1.y()),
p1.z() + mu * (p2.z() - p1.z()));
return p;
}
void Scene::playerMoved(const osg::Vec3f &pos)
{
if (!mCurrentCell || !mCurrentCell->isExterior())
return;
// figure out the center of the current cell grid (*not* necessarily mCurrentCell, which is the cell the player is in)
int cellX, cellY;
getGridCenter(cellX, cellY);
float centerX, centerY;
MWBase::Environment::get().getWorld()->indexToPosition(cellX, cellY, centerX, centerY, true);
const float maxDistance = 8192/2 + 1024; // 1/2 cell size + threshold
float distance = std::max(std::abs(centerX-pos.x()), std::abs(centerY-pos.y()));
if (distance > maxDistance)
{
int newX, newY;
MWBase::Environment::get().getWorld()->positionToIndex(pos.x(), pos.y(), newX, newY);
changeCellGrid(newX, newY);
//mRendering.updateTerrain();
}
}
inline void update(void)
{
_pat.setPosition(osg::Vec3f(_eye.x(), _eye.y(), _pat.getPosition().z()));
}
//------------------------------------------------------------------------------
osg::ref_ptr<osg::Node> setupScene( osg::ref_ptr<osg::Geometry> geom, osg::Vec3f bbmin, osg::Vec3f bbmax )
{
osg::ref_ptr<osg::Group> scene = new osg::Group;
//////////////////////////////
// CREATE PARTICLE GEOMETRY //
//////////////////////////////
osg::ref_ptr<osg::Geode> geode = new osg::Geode;
geode->addDrawable( geom.get() );
osg::ref_ptr<osg::Program> computation = new osg::Program;
const std::string vtxShader=
"uniform vec2 pixelsize; \n"
" \n"
"void main(void) \n"
"{ \n"
" vec4 worldPos = vec4(gl_Vertex.x,gl_Vertex.y,gl_Vertex.z,1.0); \n"
" vec4 projPos = gl_ModelViewProjectionMatrix * worldPos; \n"
" \n"
" float dist = projPos.z / projPos.w; \n"
" float distAlpha = (dist+1.0)/2.0; \n"
" gl_PointSize = pixelsize.y - distAlpha * (pixelsize.y - pixelsize.x); \n"
" \n"
" gl_Position = projPos; \n"
"} \n";
computation->addShader( new osg::Shader(osg::Shader::VERTEX, vtxShader ) );
const std::string frgShader=
"void main (void) \n"
"{ \n"
" vec4 result; \n"
" \n"
" vec2 tex_coord = gl_TexCoord[0].xy; \n"
" tex_coord.y = 1.0-tex_coord.y; \n"
" float d = 2.0*distance(tex_coord.xy, vec2(0.5, 0.5)); \n"
" result.a = step(d, 1.0); \n"
" \n"
" vec3 eye_vector = normalize(vec3(0.0, 0.0, 1.0)); \n"
" vec3 light_vector = normalize(vec3(2.0, 2.0, 1.0)); \n"
" vec3 surface_normal = normalize(vec3(2.0* \n"
" (tex_coord.xy-vec2(0.5, 0.5)), sqrt(1.0-d))); \n"
" vec3 half_vector = normalize(eye_vector+light_vector); \n"
" \n"
" float specular = dot(surface_normal, half_vector); \n"
" float diffuse = dot(surface_normal, light_vector); \n"
" \n"
" vec4 lighting = vec4(0.75, max(diffuse, 0.0), pow(max(specular, 0.0), 40.0), 0.0); \n"
" \n"
" result.rgb = lighting.x*vec3(0.2, 0.8, 0.2)+lighting.y*vec3(0.6, 0.6, 0.6)+ \n"
" lighting.z*vec3(0.25, 0.25, 0.25); \n"
" \n"
" gl_FragColor = result; \n"
"} \n";
computation->addShader( new osg::Shader( osg::Shader::FRAGMENT, frgShader ) );
geode->getOrCreateStateSet()->setAttribute(computation);
geode->getOrCreateStateSet()->setMode(GL_VERTEX_PROGRAM_POINT_SIZE, osg::StateAttribute::ON);
geode->getOrCreateStateSet()->setTextureAttributeAndModes(0, new osg::PointSprite, osg::StateAttribute::ON);
geode->getOrCreateStateSet()->setAttribute( new osg::AlphaFunc( osg::AlphaFunc::GREATER, 0.1f) );
geode->getOrCreateStateSet()->setMode( GL_ALPHA_TEST, GL_TRUE );
geode->getOrCreateStateSet()->addUniform( new osg::Uniform( "pixelsize", osg::Vec2(1.0f,50.0f) ) );
geode->setCullingActive( false );
scene->addChild( geode );
/////////////////////////
// CREATE BOUNDING BOX //
/////////////////////////
osg::Geode* bbox = new osg::Geode;
bbox->addDrawable(new osg::ShapeDrawable(new osg::Box((bbmin + bbmax) * 0.5f,bbmax.x() - bbmin.x(),bbmax.y() - bbmin.y(),bbmax.z() - bbmin.z()),new osg::TessellationHints()));
bbox->getOrCreateStateSet()->setMode( GL_LIGHTING, osg::StateAttribute::OFF );
bbox->getOrCreateStateSet()->setAttribute( new osg::PolygonMode(osg::PolygonMode::FRONT_AND_BACK,osg::PolygonMode::LINE));
scene->addChild( bbox );
return scene;
}
void VRPhysics::setGravity(OSG::Vec3f v) { Lock lock(mtx()); if (body) body->setGravity(btVector3 (v.x(),v.y(),v.z())); }
////////////////////////////////////////////////////////////
/// Set the sound position (take a 3D vector).
/// The default position is (0, 0, 0)
////////////////////////////////////////////////////////////
void Sound::SetPosition(const osg::Vec3f& Position)
{
SetPosition(Position.x(), Position.y(), Position.z());
}
Vector3::Vector3(osg::Vec3f const &vec)
: m_x(vec.x()), m_y(vec.y()), m_z(vec.z())
{}
bool FFTOceanSurface::updateMipmaps( const osg::Vec3f& eye, unsigned int frame )
{
static unsigned int count = 0;
bool updated = false;
_newNumVertices = 0;
int tileSize = _tileResolution+1;
int x_offset = 0;
int y_offset = 0;
if(_isEndless)
{
float xMin = _startPos.x();
float yMin = _startPos.y() - (float)((_tileResolution+1)*_numTiles);
x_offset = (int) ( (eye.x()-xMin) / (float)_tileResolution );
y_offset = (int) ( (eye.y()-yMin) / (float)_tileResolution );
x_offset -= _numTiles/2;
y_offset -= _numTiles/2;
_startPos.x() += (float)(x_offset * tileSize);
_startPos.y() += (float)(y_offset * tileSize);
}
for( unsigned int y = 0; y < _numTiles; ++y)
{
for( unsigned int x = 0; x < _numTiles; ++x)
{
osg::Vec3f newbound = getTile(x,y)->getBound().center();
newbound.x() += (float)(x_offset * tileSize);
newbound.y() += (float)(y_offset * tileSize);
osg::Vec3f distanceToTile = newbound - eye;
unsigned int mipmapLevel = 0;
for( unsigned int m = 0; m < _minDist.size(); ++m )
{
if( distanceToTile.length2() > _minDist.at(m) )
mipmapLevel = m;
}
if( getTile(x,y)->getLevel() != mipmapLevel )
updated = true;
getTile(x,y)->setLevel( mipmapLevel );
getTile(x,y)->setIdx( _newNumVertices );
unsigned int verts = 0;
unsigned int size = getTile(x,y)->getResolution();
verts = size * size;
if(x == _numTiles-1 )
verts += size;
if(y == _numTiles-1 )
verts += size;
if(x == _numTiles-1 && y == _numTiles-1)
verts += 1;
_newNumVertices += verts;
}
}
return updated;
}
void CoordinateConverter::toLocal(osg::Vec3f& point)
{
point.x() -= static_cast<float>(mCellX);
point.y() -= static_cast<float>(mCellY);
}
void OsgDrawableCullCallback::SetParams (bool wms_active, int cx, int cy,
osg::Vec3f &_eye, osg::Vec3f &_center, osg::Vec3f &_up,
osg::Vec3f &_punto_mira, bool _resetWMS,
double msec, const unsigned char &_blending)
{
// guardamos los parámetros
eye = _eye; // posición de la cámara
punto_mira = _punto_mira; // punto de corte con la escena
width2 = cx; // mitad del ancho de la imagen, en pixels
height2 = cy; // mitad del alto de la imagen, en pixels
// calculamos los 3 ejes del sistema de referencia de la cámara
vx = _up.x();
vy = _up.y();
vz = _up.z();
wx = _center.x() - _eye.x();
wy = _center.y() - _eye.y();
wz = _center.z() - _eye.z();
ux = wy*vz - wz*vy;
uy = wz*vx - wx*vz;
uz = wx*vy - wy*vx;
// calculamos la distancia focal (mirar perspectiva.tex)
// tendría que usar la función UTMToSceneCoords, pero no sé como hacerlo desde aquí
//cpw::Point3d<float> P1 = cpw::ApplicationScene::GetInstance()->GetScene()->UTMToSceneCoords(cpw::Point3d<float>(punto_mira.x(), punto_mira.y(), punto_mira.z()));
cpw::Point3d<double> out = ((OsgScene *)cpw::ApplicationScene::GetInstance()->GetScene())->UTMToSceneCoords(
cpw::Point3d<double>(punto_mira.x() - traslation.x(),
punto_mira.y() - traslation.y(),
punto_mira.z() - traslation.z()));
double x1=out.x, y1=out.y, z1=out.z;
/* ahora convertimos a utm con la llamada de David
double x1 = punto_mira.x() - traslation.x();
double y1 = punto_mira.y() - traslation.y() - 3e6;
double z1 = punto_mira.z() - traslation.z();
*/
double num = x1*wx + y1*wy + z1*wz - eye.x()*wx - eye.y()*wy - eye.z()*wz;
double den = x1*vx + y1*vy + z1*vz - eye.x()*vx - eye.y()*vy - eye.z()*vz;
D = - height2 / 3.0 * num / den;
// si alquien picó en el tree layer, _resetWMS está a true, y pasamos al estado 3
if (_resetWMS) {
switch (estadoWMS) {
case 1: CancelPetitions();
resetWMS = true;
break;
case 2: estadoWMS = 3;
CancelPetitions();
// según si quedan capas o no, pasamos al estado 3 o seguimos en el estado 2
if (wms_active) {
estadoWMS=1;
//resetWMS = true;
} else {
estadoWMS=3;
}
break;
case 3: CancelPetitions();
break;
}
}
// colocamos el estado WMS actual (ver grafo libreta y algoritmoWMS.doc)
if (wms_active) {
if (estadoWMS == 0) estadoWMS = 1;
//if (pets.empty()) ComputeNextPetition();
ComputeNextPetition();
} else {
switch (estadoWMS) {
case 1: estadoWMS = 0;
CancelPetitions();
resetWMS = true;
break;
case 2: estadoWMS = 3;
CancelPetitions();
break;
}
}
// si hay peticiones pendientes, miramos si han llegado
if (!pets.empty() && estadoWMS>0 && estadoWMS<3) {
// si alguna textura no la reclamo nadie, las descartamos
for (int i=(int)pets.size()-1; i>=0; i--) {
if (pets[i].TextureWMS.get()) {
pets.erase (pets.begin()+i);
printf ("hubo una textura que no reclamó nadie. Quedan %d pendientes", pets.size());
}
}
// si se quedó vacía reiniciamos el flag
//if (pets.empty()) PET_PEND = false;
//instead of getting and releasing the mutex in every "IsPetitionAttended" call,
//better call this function to get it only once
petman->GainSafeAccess();
// miramos si alguna petición pendiente ha llegado
for (unsigned int i=0; i<pets.size(); i++) {
bool result = petman->IsPetitionAttended (pets[i].id_wms, pets[i].TextureWMS);
if (!result) printf ("hubo una petición errónea");
}
petman->ReleaseSafeAccess(); //release mutex
}
// calculamos el nuevo factor de blending
if (last_blending != _blending) {
// si han movido el slider, cogemos el nuevo valor
last_blending = blending = _blending;
} else {
// si no, lo hacemos en función del tiempo
switch (estadoWMS) {
case 0: blending = 0; break;
case 2: if (blending < _blending) {
int inc = msec * 255 / BLENDING_DELAY;
if (inc==0) inc = 1;
int bl_i = (int) blending + inc;
blending = (bl_i > _blending)? _blending : (unsigned char) bl_i;
}
break;
case 3: if (blending > 0) {
int inc = msec * 255 / BLENDING_DELAY;
if (inc==0) inc = 1;
int bl_i = (int) blending - inc;
blending = (bl_i < 0)? 0 : (unsigned char) bl_i;
}
// si llegamos a cero cambiamos de estado y reseteamos texturas
if (blending == 0) {
resetWMS = true;
if (wms_active) estadoWMS=1;
else {
estadoWMS=0;
CancelPetitions();
}
}
break;
}
}
// si no hay peticiones pendientes, actualizamos el cronometro
if (pets.empty()) {
t0_wms = osg::Timer::instance()->tick();
} else {
// si hace tiempo que no llegan texturas, reseteamos la cola de peticiones
if (estadoWMS==2 && GetWaitedTimeWMS()>1000*MAX_TIME_OUT) {
printf ("¡¡¡¡¡¡¡¡¡¡¡¡¡TIME_OUT!!!!!!!!!!!!!!!!");
CancelPetitions();
t0_wms = osg::Timer::instance()->tick();
resetPetPend = true;
}
}
}
bool SDCloudLayer::reposition( const osg::Vec3f& p, double dt )
{
if (getCoverage() != SDCloudLayer::SD_CLOUD_CLEAR)
{
osg::Vec3 asl_offset( p );
asl_offset.normalize();
if ( p.y() <= layer_asl )
{
asl_offset *= layer_asl;
} else
{
asl_offset *= layer_asl + layer_thickness;
}
asl_offset += p;
osg::Matrix T, LON, LAT;
T.makeTranslate( asl_offset );
//LON.makeRotate(lon, osg::Vec3(0, 0, 1));
//LAT.makeRotate(90.0 * SD_DEGREES_TO_RADIANS - lat, osg::Vec3(0, 1, 0));
layer_transform->setMatrix( T );
group_bottom->getStateSet()->setRenderBinDetails(-(int)layer_asl, "RenderBin");
group_top->getStateSet()->setRenderBinDetails((int)layer_asl, "RenderBin");
if ( alt <= layer_asl )
{
layer_root->setSingleChildOn(0);
} else if ( alt >= layer_asl + layer_thickness )
{
layer_root->setSingleChildOn(1);
} else
{
layer_root->setAllChildrenOff();
}
double sp_dist = speed * dt;
if ( p.x() != last_x || p.y() != last_y || sp_dist != 0 )
{
double ax = 0.0, ay = 0.0, bx = 0.0, by = 0.0;
if (sp_dist > 0)
{
bx = cos((180.0-direction) * SD_DEGREES_TO_RADIANS) * sp_dist;
by = sin((180.0-direction) * SD_DEGREES_TO_RADIANS) * sp_dist;
}
double xoff = (ax + bx) / (2 * scale);
double yoff = (ay + by) / (2 * scale);
const float layer_scale = layer_span / scale;
base[0] += xoff;
if ( base[0] > -10.0 && base[0] < 10.0 )
{
base[0] -= (int)base[0];
} else
{
base[0] = 0.0;
}
base[1] += yoff;
if ( base[1] > -10.0 && base[1] < 10.0 )
{
base[1] -= (int)base[1];
} else
{
base[1] = 0.0;
}
setTextureOffset(base);
last_pos = p;
scale = layer_scale;
}
}
//layer3D->reposition( p, up, lon, lat, dt, layer_asl, speed, direction);
return true;
}
void EnPlayerSound::updatePosition( const osg::Vec3f& pos )
{
_soundPosition.x = pos.x();
_soundPosition.y = pos.y();
_soundPosition.z = pos.z();
}
float Storage::getHeightAt(const osg::Vec3f &worldPos)
{
int cellX = static_cast<int>(std::floor(worldPos.x() / 8192.f));
int cellY = static_cast<int>(std::floor(worldPos.y() / 8192.f));
ESM::Land* land = getLand(cellX, cellY);
if (!land || !(land->mDataTypes&ESM::Land::DATA_VHGT))
return -2048;
// Mostly lifted from Ogre::Terrain::getHeightAtTerrainPosition
// Normalized position in the cell
float nX = (worldPos.x() - (cellX * 8192))/8192.f;
float nY = (worldPos.y() - (cellY * 8192))/8192.f;
// get left / bottom points (rounded down)
float factor = ESM::Land::LAND_SIZE - 1.0f;
float invFactor = 1.0f / factor;
int startX = static_cast<int>(nX * factor);
int startY = static_cast<int>(nY * factor);
int endX = startX + 1;
int endY = startY + 1;
endX = std::min(endX, ESM::Land::LAND_SIZE-1);
endY = std::min(endY, ESM::Land::LAND_SIZE-1);
// now get points in terrain space (effectively rounding them to boundaries)
float startXTS = startX * invFactor;
float startYTS = startY * invFactor;
float endXTS = endX * invFactor;
float endYTS = endY * invFactor;
// get parametric from start coord to next point
float xParam = (nX - startXTS) * factor;
float yParam = (nY - startYTS) * factor;
/* For even / odd tri strip rows, triangles are this shape:
even odd
3---2 3---2
| / | | \ |
0---1 0---1
*/
// Build all 4 positions in normalized cell space, using point-sampled height
osg::Vec3f v0 (startXTS, startYTS, getVertexHeight(land, startX, startY) / 8192.f);
osg::Vec3f v1 (endXTS, startYTS, getVertexHeight(land, endX, startY) / 8192.f);
osg::Vec3f v2 (endXTS, endYTS, getVertexHeight(land, endX, endY) / 8192.f);
osg::Vec3f v3 (startXTS, endYTS, getVertexHeight(land, startX, endY) / 8192.f);
// define this plane in terrain space
osg::Plane plane;
// FIXME: deal with differing triangle alignment
if (true)
{
// odd row
bool secondTri = ((1.0 - yParam) > xParam);
if (secondTri)
plane = osg::Plane(v0, v1, v3);
else
plane = osg::Plane(v1, v2, v3);
}
/*
else
{
// even row
bool secondTri = (yParam > xParam);
if (secondTri)
plane.redefine(v0, v2, v3);
else
plane.redefine(v0, v1, v2);
}
*/
// Solve plane equation for z
return (-plane.getNormal().x() * nX
-plane.getNormal().y() * nY
- plane[3]) / plane.getNormal().z() * 8192;
}
bool FFTOceanSurfaceVBO::updateLevels(const osg::Vec3f& eye)
{
int x_offset = 0;
int y_offset = 0;
if(_isEndless)
{
float xMin = _startPos.x();
float yMin = _startPos.y()-(_tileResolution*_numTiles);
x_offset = (int) ( (eye.x()-xMin) / _tileResolution );
y_offset = (int) ( (eye.y()-yMin) / _tileResolution );
x_offset -= ((int)_numTiles)/2;
y_offset -= ((int)_numTiles)/2;
// std::cerr << "Offset: " << x_offset << "," << y_offset << std::endl;
// std::cerr << "Start: " << _startPos.x() << "," << _startPos.y() << std::endl;
if(x_offset != 0 || y_offset != 0)
{
//std::cerr << "Surface Move." << std::endl;
while ((x_offset != 0) || (y_offset != 0))
{
if(x_offset < 0)
{
osg::Vec3f offset;
_startPos.x() -= (int)_tileResolution;
for(int r = 0; r < (int)_numTiles; ++r)
{
std::vector< osg::ref_ptr<osgOcean::MipmapGeometryVBO> >& row = _mipmapGeom.at(r);
offset.x() = _startPos.x();
offset.y() = _startPos.y()-r*(int)_tileResolution;
offset.z() = 0;
row.insert( row.begin(), row.back() ); // insert the
row.pop_back();
row.front()->setOffset( offset ); // change offset
}
++x_offset;
}
else if (x_offset > 0)
{
osg::Vec3f offset;
_startPos.x() += (int)_tileResolution;
for(int r = 0; r < (int)_numTiles; ++r)
{
std::vector< osg::ref_ptr<osgOcean::MipmapGeometryVBO> >& row = _mipmapGeom.at(r);
offset.x() = _startPos.x() + ( (_numTiles-1)*(int)_tileResolution );
offset.y() = _startPos.y()-r*(int)_tileResolution;
offset.z() = 0;
row.insert( row.end(), row.front() );
row.erase( row.begin() );
row.back()->setOffset( offset );
}
--x_offset;
}
if(y_offset < 0)
{
_startPos.y() -= (int)_tileResolution;
_mipmapGeom.insert( _mipmapGeom.end(), _mipmapGeom.front() );
_mipmapGeom.erase( _mipmapGeom.begin() );
osg::Vec3f offset;
for(int c = 0; c < (int)_numTiles; c++ )
{
offset.x() = _startPos.x() + c *(int) _tileResolution;
offset.y() = _startPos.y()-( (_numTiles-1)*(int)_tileResolution );
offset.z() = 0;
_mipmapGeom.back().at(c)->setOffset(offset);
}
++y_offset;
}
else if(y_offset > 0)
{
_startPos.y() += (int)_tileResolution;
_mipmapGeom.insert( _mipmapGeom.begin(), _mipmapGeom.back() );
_mipmapGeom.pop_back();
osg::Vec3f offset;
for(int c = 0; c < (int)_numTiles; c++ )
{
offset.x() = _startPos.x() + c * (int)_tileResolution;
offset.y() = _startPos.y();
offset.z() = 0;
_mipmapGeom.front().at(c)->setOffset(offset);
}
--y_offset;
}
}
}
}
unsigned updates=0;
for(int r = _numTiles-1; r>=0; --r )
{
for(int c = _numTiles-1; c>=0; --c )
{
osgOcean::MipmapGeometryVBO* curGeom = _mipmapGeom.at(r).at(c).get();
osg::Vec3f centre = curGeom->getBound().center();
float distanceToTile2 = (centre-eye).length2();
unsigned mipmapLevel = 0;
unsigned rightLevel = 0;
unsigned belowLevel = 0;
for( unsigned int m = 0; m < _minDist.size(); ++m )
{
if( distanceToTile2 > _minDist.at(m) )
mipmapLevel = m;
}
if( c != _numTiles-1 && r != _numTiles-1 ){
osgOcean::MipmapGeometryVBO* rightGeom = _mipmapGeom.at(r).at(c+1).get();
osgOcean::MipmapGeometryVBO* belowGeom = _mipmapGeom.at(r+1).at(c).get();
rightLevel = rightGeom->getLevel();
belowLevel = belowGeom->getLevel();
}
else
{
if( c != _numTiles-1 ){
osgOcean::MipmapGeometryVBO* rightGeom = _mipmapGeom.at(r).at(c+1).get();
rightLevel = rightGeom->getLevel();
}
else{
rightLevel = mipmapLevel;
}
if( r != _numTiles-1 ){
osgOcean::MipmapGeometryVBO* belowGeom = _mipmapGeom.at(r+1).at(c).get();
belowLevel = belowGeom->getLevel();
}
else{
belowLevel = mipmapLevel;
}
}
if( curGeom->updatePrimitives(mipmapLevel,rightLevel,belowLevel) )
updates++;
}
}
#ifdef OSGOCEAN_MIPMAP
if (updates > 0)
{
std::cerr << "Updates: " << updates << std::endl;
for(int r = _numTiles-1; r>=0; --r )
{
for(int c = _numTiles-1; c>=0; --c )
{
fprintf(stderr, "%d", _mipmapGeom.at(r).at(c)->getLevel());
}
fprintf(stderr, "\n");
}
}
#endif /*OSGOCEAN_MIPMAP*/
return updates > 0;
}
void vecfFunc(osg::Vec3f vec) {
std::cout << "Got the float vector " << vec.x() << "," << vec.y() << "," << vec.z() << std::endl;
}
// constructor
PrecipitationBase::PrecipitationBase(const char * szMaterialName, size_t nParticlesNumber, const osg::Vec3f & vBoxHalfSize, float fMeanLifeTime/* = 10.f*/)
: m_bActive(false)
, m_nParticlesNumber(nParticlesNumber)
, m_vBoxHalf(vBoxHalfSize)
, m_fIntensity(0.0f)
, m_fWindSpeed(0.0f)
{
// base set up
setUseDisplayList(false);
setUseVertexBufferObjects(true);
setDataVariance(osg::Object::STATIC);
setComputeBoundingBoxCallback(new osg::Drawable::ComputeBoundingBoxCallback());
//
// create state set
//
osg::StateSet * pCurStateSet = getOrCreateStateSet();
// setup shader defines (scroll scales and so on)
avCore::Database::ShaderDefineVector cShaderDefines;
// full box shader definition
{
const osg::Vec3f vBoxFull = m_vBoxHalf * 2.0f;
std::ostringstream stream;
stream << "vec3(" << vBoxFull.x() << ", " << vBoxFull.y() << ", " << vBoxFull.z() << ")";
cShaderDefines.push_back(avCore::Database::ShaderDefine("SCROLL_FULL", stream.str().c_str()));
}
// full-box rcp shader definition
{
const osg::Vec3f vBoxFullRcp = osg::Vec3f(0.5f / m_vBoxHalf.x(), 0.5f / m_vBoxHalf.y(), 0.5f / m_vBoxHalf.z());
std::ostringstream stream;
stream << "vec3(" << vBoxFullRcp.x() << ", " << vBoxFullRcp.y() << ", " << vBoxFullRcp.z() << ")";
cShaderDefines.push_back(avCore::Database::ShaderDefine("SCROLL_RCP", stream.str().c_str()));
}
// setup shader
osg::Program * pCurProgram = new osg::Program;
pCurProgram->setName(szMaterialName);
pCurProgram->addShader(avCore::GetDatabase()->LoadShader(std::string(szMaterialName).append(".vs").c_str(), &cShaderDefines, osg::Shader::VERTEX ));
pCurProgram->addShader(avCore::GetDatabase()->LoadShader(std::string(szMaterialName).append(".gs").c_str(), NULL , osg::Shader::GEOMETRY));
pCurProgram->addShader(avCore::GetDatabase()->LoadShader(std::string(szMaterialName).append(".fs").c_str(), NULL , osg::Shader::FRAGMENT));
pCurProgram->setParameter(GL_GEOMETRY_VERTICES_OUT_EXT, 4);
pCurProgram->setParameter(GL_GEOMETRY_INPUT_TYPE_EXT, GL_POINTS);
pCurProgram->setParameter(GL_GEOMETRY_OUTPUT_TYPE_EXT, GL_TRIANGLE_STRIP);
// bind shader
pCurStateSet->setAttribute(pCurProgram);
// setup texture for point quads
pCurStateSet->setTextureAttribute(0, avCore::GetDatabase()->LoadTexture(std::string(szMaterialName).append(".dds").c_str(), osg::Texture::CLAMP_TO_EDGE));
// box position
m_uniformScrollLBN = new osg::Uniform("ScrollLBN", osg::Vec3f());
pCurStateSet->addUniform(m_uniformScrollLBN.get());
// LTP box offset
m_uniformWP2LTPBoxOffset = new osg::Uniform("LTPOffset", osg::Vec2f());
pCurStateSet->addUniform(m_uniformWP2LTPBoxOffset.get());
// wind vector
m_uniformWindVec = new osg::Uniform("WindVector", osg::Vec3f());
pCurStateSet->addUniform(m_uniformWindVec.get());
// render data
m_uniformRenderData = new osg::Uniform("RenderData", osg::Vec4f());
pCurStateSet->addUniform(m_uniformRenderData.get());
//
// Construct geometry
//
// attach draw call command
m_dipDrawArrays = new osg::DrawArrays(osg::PrimitiveSet::POINTS);
addPrimitiveSet(m_dipDrawArrays.get());
// create vertex array
Half4Array * aBoxPointsPos = new Half4Array(m_nParticlesNumber);
// speed deviation factors
osg::Vec4ubArray * aSpeedFactors = new osg::Vec4ubArray(m_nParticlesNumber);
// fill every vertex point
avCore::RandomNumber rndGen;
for (size_t i = 0; i < m_nParticlesNumber; ++i)
{
// random lifetime
float fLifeTime = rndGen.random_dev(fMeanLifeTime, 0.3f * fMeanLifeTime);
// get random position
osg::Vec3f vRandPos;
vRandPos.x() = rndGen.random_unit_signed() * m_vBoxHalf.x();
vRandPos.y() = rndGen.random_unit_signed() * m_vBoxHalf.y();
vRandPos.z() = rndGen.random_unit_signed() * m_vBoxHalf.z();
// save it
tagVertexData & curVertex = aBoxPointsPos->at(i);
curVertex.x = vRandPos.x();
curVertex.y = vRandPos.y();
curVertex.z = vRandPos.z();
curVertex.t = fLifeTime;
// speed deviation factors
osg::Vec4ub & curSpeedFactors = aSpeedFactors->at(i);
curSpeedFactors[0] = rndGen.random_8bit();
curSpeedFactors[1] = rndGen.random_8bit();
curSpeedFactors[2] = rndGen.random_8bit();
curSpeedFactors[3] = rndGen.random_8bit();
}
// set vertex array
aBoxPointsPos->setDataVariance(osg::Object::STATIC);
setVertexArray(aBoxPointsPos);
// set factors array
static const size_t
idxSpeedFactorsBinding = 5;
aSpeedFactors->setDataVariance(osg::Object::STATIC);
setVertexAttribBinding(idxSpeedFactorsBinding, osg::Geometry::BIND_PER_VERTEX);
setVertexAttribNormalize(idxSpeedFactorsBinding, GL_TRUE);
setVertexAttribArray(idxSpeedFactorsBinding, aSpeedFactors);
// exit
return;
}