예제 #1
0
int main( int argc, char ** argv )
{
#if defined (FC_OS_LINUX) || defined(FC_OS_BSD)
    // Make sure to setup the Qt locale system before setting LANG and LC_ALL to C.
    // which is needed to use the system locale settings.
    (void)QLocale::system();
#if QT_VERSION < 0x050000
    // http://www.freecadweb.org/tracker/view.php?id=399
    // Because of setting LANG=C the Qt automagic to use the correct encoding
    // for file names is broken. This is a workaround to force the use of UTF-8 encoding
    QFile::setEncodingFunction(myEncoderFunc);
    QFile::setDecodingFunction(myDecoderFunc);
#endif
    // See https://forum.freecadweb.org/viewtopic.php?f=18&t=20600
    // See Gui::Application::runApplication()
    putenv("LC_NUMERIC=C");
    putenv("PYTHONPATH=");
#elif defined(FC_OS_MACOSX)
    (void)QLocale::system();
    putenv("PYTHONPATH=");
#else
    _putenv("PYTHONPATH=");
    // https://forum.freecadweb.org/viewtopic.php?f=4&t=18288
    // https://forum.freecadweb.org/viewtopic.php?f=3&t=20515
    const char* fc_py_home = getenv("FC_PYTHONHOME");
    if (fc_py_home)
        _putenv_s("PYTHONHOME", fc_py_home);
    else
        _putenv("PYTHONHOME=");
#endif

#if defined (FC_OS_WIN32)
    int argc_ = argc;
    QVector<QByteArray> data;
    QVector<char *> argv_;

    // get the command line arguments as unicode string
    {
        QCoreApplication app(argc, argv);
        QStringList args = app.arguments();
        for (QStringList::iterator it = args.begin(); it != args.end(); ++it) {
            data.push_back(it->toUtf8());
            argv_.push_back(data.back().data());
        }
        argv_.push_back(0); // 0-terminated string
    }
#endif

#if PY_MAJOR_VERSION >= 3
#if defined(_MSC_VER) && _MSC_VER <= 1800
    // See InterpreterSingleton::init
    Redirection out(stdout), err(stderr), inp(stdin);
#endif
#endif // PY_MAJOR_VERSION

    // Name and Version of the Application
    App::Application::Config()["ExeName"] = "FreeCAD";
    App::Application::Config()["ExeVendor"] = "FreeCAD";
    App::Application::Config()["AppDataSkipVendor"] = "true";
    App::Application::Config()["MaintainerUrl"] = "http://www.freecadweb.org/wiki/Main_Page";

    // set the banner (for logging and console)
    App::Application::Config()["CopyrightInfo"] = sBanner;
    App::Application::Config()["AppIcon"] = "freecad";
    App::Application::Config()["SplashScreen"] = "freecadsplash";
    App::Application::Config()["StartWorkbench"] = "StartWorkbench";
    //App::Application::Config()["HiddenDockWindow"] = "Property editor";
    App::Application::Config()["SplashAlignment" ] = "Bottom|Left";
    App::Application::Config()["SplashTextColor" ] = "#ffffff"; // white
    App::Application::Config()["SplashInfoColor" ] = "#c8c8c8"; // light grey

    try {
        // Init phase ===========================================================
        // sets the default run mode for FC, starts with gui if not overridden in InitConfig...
        App::Application::Config()["RunMode"] = "Gui";
        App::Application::Config()["Console"] = "0";

        // Inits the Application 
#if defined (FC_OS_WIN32)
        App::Application::init(argc_, argv_.data());
#else
        App::Application::init(argc, argv);
#endif
#if defined(_MSC_VER)
        // create a dump file when the application crashes
        std::string dmpfile = App::Application::getUserAppDataDir();
        dmpfile += "crash.dmp";
        InitMiniDumpWriter(dmpfile);
#endif
        std::map<std::string, std::string>::iterator it = App::Application::Config().find("NavigationStyle");
        if (it != App::Application::Config().end()) {
            ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/View");
            // if not already defined do it now (for the very first start)
            std::string style = hGrp->GetASCII("NavigationStyle", it->second.c_str());
            hGrp->SetASCII("NavigationStyle", style.c_str());
        }

        Gui::Application::initApplication();

        // Only if 'RunMode' is set to 'Gui' do the replacement
        if (App::Application::Config()["RunMode"] == "Gui")
            Base::Interpreter().replaceStdOutput();
    }
    catch (const Base::UnknownProgramOption& e) {
        QApplication app(argc,argv);
        QString appName = QString::fromLatin1(App::Application::Config()["ExeName"].c_str());
        QString msg = QString::fromLatin1(e.what());
        QString s = QLatin1String("<pre>") + msg + QLatin1String("</pre>");
        QMessageBox::critical(0, appName, s);
        exit(1);
    }
    catch (const Base::ProgramInformation& e) {
        QApplication app(argc,argv);
        QString appName = QString::fromLatin1(App::Application::Config()["ExeName"].c_str());
        QString msg = QString::fromUtf8(e.what());
        QString s = QLatin1String("<pre>") + msg + QLatin1String("</pre>");

        QMessageBox msgBox;
        msgBox.setIcon(QMessageBox::Information);
        msgBox.setWindowTitle(appName);
        msgBox.setDetailedText(msg);
        msgBox.setText(s);
        msgBox.exec();
        exit(0);
    }
    catch (const Base::Exception& e) {
        // Popup an own dialog box instead of that one of Windows
        QApplication app(argc,argv);
        QString appName = QString::fromLatin1(App::Application::Config()["ExeName"].c_str());
        QString msg;
        msg = QObject::tr("While initializing %1 the following exception occurred: '%2'\n\n"
                          "Python is searching for its files in the following directories:\n%3\n\n"
                          "Python version information:\n%4\n")
                          .arg(appName).arg(QString::fromUtf8(e.what()))
#if PY_MAJOR_VERSION >= 3
#if PY_MINOR_VERSION >= 5
                          .arg(QString::fromUtf8(Py_EncodeLocale(Py_GetPath(),NULL))).arg(QString::fromLatin1(Py_GetVersion()));
#else
                          .arg(QString::fromUtf8(_Py_wchar2char(Py_GetPath(),NULL))).arg(QString::fromLatin1(Py_GetVersion()));
#endif
#else
                          .arg(QString::fromUtf8(Py_GetPath())).arg(QString::fromLatin1(Py_GetVersion()));
예제 #2
0
int main( int argc, char ** argv )
{
#if defined (FC_OS_LINUX) || defined(FC_OS_BSD)
    // Make sure to setup the Qt locale system before setting LANG and LC_ALL to C.
    // which is needed to use the system locale settings.
    (void)QLocale::system();
    // http://www.freecadweb.org/tracker/view.php?id=399
    // Because of setting LANG=C the Qt automagic to use the correct encoding
    // for file names is broken. This is a workaround to force the use of UTF-8 encoding
    QFile::setEncodingFunction(myEncoderFunc);
    QFile::setDecodingFunction(myDecoderFunc);
    // Make sure that we use '.' as decimal point. See also
    // http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559846
    putenv("LC_NUMERIC=C");
    putenv("PYTHONPATH=");
#elif defined(FC_OS_MACOSX)
    (void)QLocale::system();
    putenv("LC_NUMERIC=C");
    putenv("PYTHONPATH=");
#else
    setlocale(LC_NUMERIC, "C");
    _putenv("PYTHONPATH=");
#endif

#if defined (FC_OS_WIN32)
    int argc_ = argc;
    QVector<QByteArray> data;
    QVector<char *> argv_;

    // get the command line arguments as unicode string
    {
        QCoreApplication app(argc, argv);
        QStringList args = app.arguments();
        for (QStringList::iterator it = args.begin(); it != args.end(); ++it) {
            data.push_back(it->toUtf8());
            argv_.push_back(data.back().data());
        }
        argv_.push_back(0); // 0-terminated string
    }
#endif

    // Name and Version of the Application
    App::Application::Config()["ExeName"] = "FreeCAD";
    App::Application::Config()["ExeVendor"] = "FreeCAD";
    App::Application::Config()["AppDataSkipVendor"] = "true";
    App::Application::Config()["MaintainerUrl"] = "http://www.freecadweb.org/wiki/index.php?title=Main_Page";

    // set the banner (for logging and console)
    App::Application::Config()["CopyrightInfo"] = sBanner;
    App::Application::Config()["AppIcon"] = "freecad";
    App::Application::Config()["SplashScreen"] = "freecadsplash";
    App::Application::Config()["StartWorkbench"] = "StartWorkbench";
    //App::Application::Config()["HiddenDockWindow"] = "Property editor";
    App::Application::Config()["SplashAlignment" ] = "Bottom|Left";
    App::Application::Config()["SplashTextColor" ] = "#ffffff"; // white
    App::Application::Config()["SplashInfoColor" ] = "#c8c8c8"; // light grey

    try {
        // Init phase ===========================================================
        // sets the default run mode for FC, starts with gui if not overridden in InitConfig...
        App::Application::Config()["RunMode"] = "Gui";

        // Inits the Application 
#if defined (FC_OS_WIN32)
        App::Application::init(argc_, argv_.data());
#else
        App::Application::init(argc, argv);
#endif
#if defined(_MSC_VER)
        // create a dump file when the application crashes
        std::string dmpfile = App::Application::getUserAppDataDir();
        dmpfile += "crash.dmp";
        InitMiniDumpWriter(dmpfile);
#endif
        std::map<std::string, std::string>::iterator it = App::Application::Config().find("NavigationStyle");
        if (it != App::Application::Config().end()) {
            ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/View");
            // if not already defined do it now (for the very first start)
            std::string style = hGrp->GetASCII("NavigationStyle", it->second.c_str());
            hGrp->SetASCII("NavigationStyle", style.c_str());
        }

        Gui::Application::initApplication();

        // Only if 'RunMode' is set to 'Gui' do the replacement
        if (App::Application::Config()["RunMode"] == "Gui")
            Base::Interpreter().replaceStdOutput();
    }
    catch (const Base::UnknownProgramOption& e) {
        QApplication app(argc,argv);
        QString appName = QString::fromAscii(App::Application::Config()["ExeName"].c_str());
        QString msg = QString::fromAscii(e.what());
        QString s = QLatin1String("<pre>") + msg + QLatin1String("</pre>");
        QMessageBox::critical(0, appName, s);
        exit(1);
    }
    catch (const Base::ProgramInformation& e) {
        QApplication app(argc,argv);
        QString appName = QString::fromAscii(App::Application::Config()["ExeName"].c_str());
        QString msg = QString::fromAscii(e.what());
        QString s = QLatin1String("<pre>") + msg + QLatin1String("</pre>");
        QMessageBox::information(0, appName, s);
        exit(0);
    }
    catch (const Base::Exception& e) {
        // Popup an own dialog box instead of that one of Windows
        QApplication app(argc,argv);
        QString appName = QString::fromAscii(App::Application::Config()["ExeName"].c_str());
        QString msg;
        msg = QObject::tr("While initializing %1 the  following exception occurred: '%2'\n\n"
                          "Python is searching for its files in the following directories:\n%3\n\n"
                          "Python version information:\n%4\n")
                          .arg(appName).arg(QString::fromUtf8(e.what()))
                          .arg(QString::fromUtf8(Py_GetPath())).arg(QString::fromAscii(Py_GetVersion()));
        const char* pythonhome = getenv("PYTHONHOME");
        if (pythonhome) {
            msg += QObject::tr("\nThe environment variable PYTHONHOME is set to '%1'.")
                .arg(QString::fromUtf8(pythonhome));
            msg += QObject::tr("\nSetting this environment variable might cause Python to fail. "
                "Please contact your administrator to unset it on your system.\n\n");
        } else {
            msg += QObject::tr("\nPlease contact the application's support team for more information.\n\n");
        }

        QMessageBox::critical(0, QObject::tr("Initialization of %1 failed").arg(appName), msg);
        exit(100);
    }
    catch (...) {
        // Popup an own dialog box instead of that one of Windows
        QApplication app(argc,argv);
        QString appName = QString::fromAscii(App::Application::Config()["ExeName"].c_str());
        QString msg = QObject::tr("Unknown runtime error occurred while initializing %1.\n\n"
                                  "Please contact the application's support team for more information.\n\n").arg(appName);
        QMessageBox::critical(0, QObject::tr("Initialization of %1 failed").arg(appName), msg);
        exit(101);
    }

    // Run phase ===========================================================
    Base::RedirectStdOutput stdcout;
    Base::RedirectStdLog    stdclog;
    Base::RedirectStdError  stdcerr;
    std::streambuf* oldcout = std::cout.rdbuf(&stdcout);
    std::streambuf* oldclog = std::clog.rdbuf(&stdclog);
    std::streambuf* oldcerr = std::cerr.rdbuf(&stdcerr);

    try {
        if (App::Application::Config()["RunMode"] == "Gui")
            Gui::Application::runApplication();
        else
            App::Application::runApplication();
    }
    catch (const Base::SystemExitException&) {
        exit(0);
    }
    catch (const Base::Exception& e) {
        Base::Console().Error("%s\n", e.what());
    }
    catch (...) {
        Base::Console().Error("Application unexpectedly terminated\n");
    }

    std::cout.rdbuf(oldcout);
    std::clog.rdbuf(oldclog);
    std::cerr.rdbuf(oldcerr);

    // Destruction phase ===========================================================
    Base::Console().Log("%s terminating...\n",App::Application::Config()["ExeName"].c_str());

    // cleans up 
    App::Application::destruct();

    Base::Console().Log("%s completely terminated\n",App::Application::Config()["ExeName"].c_str());

    return 0;
}
예제 #3
0
int prepare(QFileInfo f, QStringList paths) {
	if (paths.isEmpty()) {
		cout << "No -path args were passed :(\n";
		return -1;
	}

	int lastVersion = 0;
	QString lastVersionStr;
	QFileInfo last;
	QFileInfoList l = f.absoluteDir().entryInfoList(QDir::Files);
	for (QFileInfoList::iterator i = l.begin(), e = l.end(); i != e; ++i) {
		QRegularExpressionMatch m = QRegularExpression("/tsetup.((\\d+).(\\d+).(\\d+)).exe$").match(i->absoluteFilePath());
		if (!m.hasMatch()) continue;

		int version = m.captured(2).toInt() * 1000000 + m.captured(3).toInt() * 1000 + m.captured(4).toInt();
		if (version > lastVersion) {
			lastVersion = version;
			lastVersionStr = m.captured(1);
			last = *i;
		}
	}

	if (!lastVersion) {
		cout << "No tsetup.X.Y.Z.exe found :(\n";
		return -1;
	}

	cout << "Last version: " << lastVersionStr.toUtf8().constData() << " (" << lastVersion << "), executing packer..\n";

	QDir dir("deploy/" + lastVersionStr);
	if (dir.exists()) {
		cout << "Version " << lastVersionStr.toUtf8().constData() << " already exists in /deploy..\n";
		return -1;
	}

	QString packer = QString("Packer.exe -version %1").arg(lastVersion);
	for (QStringList::iterator i = paths.begin(), e = paths.end(); i != e; ++i) {
		packer += " -path " + *i;
	}

	int res = system(packer.toUtf8().constData());

	if (res) return res;

	dir.mkpath(".");

	paths.push_back("Telegram.pdb");
	paths.push_back("Updater.pdb");
	paths.push_back("tsetup." + lastVersionStr + ".exe");
	paths.push_back(QString("tupdate%1").arg(lastVersion));
	for (QStringList::iterator i = paths.begin(), e = paths.end(); i != e; ++i) {
		if (!QFile::copy(*i, "deploy/" + lastVersionStr + "/" + *i)) {
			cout << "Could not copy " << i->toUtf8().constData() << " to deploy/" << lastVersionStr.toUtf8().constData() << "\n";
			return -1;
		}
		cout << "Copied " << i->toUtf8().constData() << "..\n";
	}
	for (QStringList::iterator i = paths.begin(), e = paths.end(); i != e; ++i) {
		QFile::remove(*i);
	}

	cout << "Update created in deploy/" << lastVersionStr.toUtf8().constData() << "\n";

	return 0;
}