예제 #1
1
Qgs3DMapScene::Qgs3DMapScene( const Qgs3DMapSettings &map, QgsAbstract3DEngine *engine )
  : mMap( map )
  , mEngine( engine )
{

  connect( &map, &Qgs3DMapSettings::backgroundColorChanged, this, &Qgs3DMapScene::onBackgroundColorChanged );
  onBackgroundColorChanged();

  // TODO: strange - setting OnDemand render policy still keeps QGIS busy (Qt 5.9.0)
  // actually it is more busy than with the default "Always" policy although there are no changes in the scene.
  //mRenderer->renderSettings()->setRenderPolicy( Qt3DRender::QRenderSettings::OnDemand );

#if QT_VERSION >= 0x050900
  // we want precise picking of terrain (also bounding volume picking does not seem to work - not sure why)
  mEngine->renderSettings()->pickingSettings()->setPickMethod( Qt3DRender::QPickingSettings::TrianglePicking );
#endif

  QRect viewportRect( QPoint( 0, 0 ), mEngine->size() );

  // Camera
  float aspectRatio = ( float )viewportRect.width() / viewportRect.height();
  mEngine->camera()->lens()->setPerspectiveProjection( mMap.fieldOfView(), aspectRatio, 10.f, 10000.0f );

  mFrameAction = new Qt3DLogic::QFrameAction();
  connect( mFrameAction, &Qt3DLogic::QFrameAction::triggered,
           this, &Qgs3DMapScene::onFrameTriggered );
  addComponent( mFrameAction ); // takes ownership

  // Camera controlling
  mCameraController = new QgsCameraController( this ); // attaches to the scene
  mCameraController->setViewport( viewportRect );
  mCameraController->setCamera( mEngine->camera() );
  mCameraController->resetView( 1000 );

  addCameraViewCenterEntity( mEngine->camera() );

  // create terrain entity

  createTerrainDeferred();
  connect( &map, &Qgs3DMapSettings::terrainGeneratorChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::terrainVerticalScaleChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::mapTileResolutionChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::maxTerrainScreenErrorChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::maxTerrainGroundErrorChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::terrainShadingChanged, this, &Qgs3DMapScene::createTerrain );
  connect( &map, &Qgs3DMapSettings::pointLightsChanged, this, &Qgs3DMapScene::updateLights );
  connect( &map, &Qgs3DMapSettings::fieldOfViewChanged, this, &Qgs3DMapScene::updateCameraLens );

  // create entities of renderers

  Q_FOREACH ( const QgsAbstract3DRenderer *renderer, map.renderers() )
  {
    Qt3DCore::QEntity *newEntity = renderer->createEntity( map );
    newEntity->setParent( this );
  }

  // listen to changes of layers in order to add/remove 3D renderer entities
  connect( &map, &Qgs3DMapSettings::layersChanged, this, &Qgs3DMapScene::onLayersChanged );

  updateLights();

#if 0
  ChunkedEntity *testChunkEntity = new ChunkedEntity( AABB( -500, 0, -500, 500, 100, 500 ), 2.f, 3.f, 7, new TestChunkLoaderFactory );
  testChunkEntity->setEnabled( false );
  testChunkEntity->setParent( this );
  chunkEntities << testChunkEntity;
#endif

  connect( mCameraController, &QgsCameraController::cameraChanged, this, &Qgs3DMapScene::onCameraChanged );
  connect( mCameraController, &QgsCameraController::viewportChanged, this, &Qgs3DMapScene::onCameraChanged );

#if 0
  // experiments with loading of existing 3D models.

  // scene loader only gets loaded only when added to a scene...
  // it loads everything: geometries, materials, transforms, lights, cameras (if any)
  Qt3DCore::QEntity *loaderEntity = new Qt3DCore::QEntity;
  Qt3DRender::QSceneLoader *loader = new Qt3DRender::QSceneLoader;
  loader->setSource( QUrl( "file:///home/martin/Downloads/LowPolyModels/tree.dae" ) );
  loaderEntity->addComponent( loader );
  loaderEntity->setParent( this );

  // mesh loads just geometry as one geometry...
  // so if there are different materials (e.g. colors) used in the model, this information is lost
  Qt3DCore::QEntity *meshEntity = new Qt3DCore::QEntity;
  Qt3DRender::QMesh *mesh = new Qt3DRender::QMesh;
  mesh->setSource( QUrl( "file:///home/martin/Downloads/LowPolyModels/tree.obj" ) );
  meshEntity->addComponent( mesh );
  Qt3DExtras::QPhongMaterial *material = new Qt3DExtras::QPhongMaterial;
  material->setAmbient( Qt::red );
  meshEntity->addComponent( material );
  Qt3DCore::QTransform *meshTransform = new Qt3DCore::QTransform;
  meshTransform->setScale( 1 );
  meshEntity->addComponent( meshTransform );
  meshEntity->setParent( this );
#endif

  if ( map.hasSkyboxEnabled() )
  {
    Qt3DExtras::QSkyboxEntity *skybox = new Qt3DExtras::QSkyboxEntity;
    skybox->setBaseName( map.skyboxFileBase() );
    skybox->setExtension( map.skyboxFileExtension() );
    skybox->setParent( this );

    // docs say frustum culling must be disabled for skybox.
    // it _somehow_ works even when frustum culling is enabled with some camera positions,
    // but then when zoomed in more it would disappear - so let's keep frustum culling disabled
    mEngine->setFrustumCullingEnabled( false );
  }

  // force initial update of chunked entities
  onCameraChanged();
}
예제 #2
0
Transformer::Transformer()
   : m_bed(new Qt3DCore::QEntity())
{
   Qt3DRender::QPlaneMesh * cube = new Qt3DRender::QPlaneMesh();
   cube->setWidth(20.0f);
   cube->setHeight(20.0f);
   cube->setMeshResolution(QSize(20,20));
   m_bed->addComponent(cube);

   Qt3DCore::QTransform *cylinderTransform = new Qt3DCore::QTransform;
   cylinderTransform->setScale(1.0f);
   cylinderTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1, 0, 0), 90.0f));
   cylinderTransform->setTranslation(QVector3D{0,0,10});

   m_material = new Qt3DRender::QPhongMaterial();
   m_material->setAmbient(Qt::red);
   m_material->setDiffuse(Qt::red);
   m_material->setSpecular(Qt::black);
   m_material->setEnabled(true);

   m_bed->addComponent(m_material);
}
예제 #3
0
Qt3DCore::QEntity *FlatTerrainChunkLoader::createEntity( Qt3DCore::QEntity *parent )
{
  QgsTerrainTileEntity *entity = new QgsTerrainTileEntity;

  // make geometry renderer

  // simple quad geometry shared by all tiles
  // QPlaneGeometry by default is 1x1 with mesh resolution QSize(2,2), centered at 0
  // TODO: the geometry could be shared inside Terrain instance (within terrain-generator specific data?)
  mTileGeometry = new Qt3DExtras::QPlaneGeometry;

  Qt3DRender::QGeometryRenderer *mesh = new Qt3DRender::QGeometryRenderer;
  mesh->setGeometry( mTileGeometry ); // takes ownership if the component has no parent
  entity->addComponent( mesh ); // takes ownership if the component has no parent

  // create material

  createTextureComponent( entity );

  // create transform

  Qt3DCore::QTransform *transform = nullptr;
  transform = new Qt3DCore::QTransform();
  entity->addComponent( transform );

  // set up transform according to the extent covered by the quad geometry
  QgsAABB bbox = mNode->bbox();
  double side = bbox.xMax - bbox.xMin;
  double half = side / 2;

  transform->setScale( side );
  transform->setTranslation( QVector3D( bbox.xMin + half, 0, bbox.zMin + half ) );

  entity->setEnabled( false );
  entity->setParent( parent );
  return entity;
}
예제 #4
0
파일: scenemodifier.cpp 프로젝트: RSATom/Qt
SceneModifier::SceneModifier(Qt3DCore::QEntity *rootEntity)
    : m_rootEntity(rootEntity)
{

    // Torus shape data
    //! [0]
    m_torus = new Qt3DExtras::QTorusMesh();
    m_torus->setRadius(1.0f);
    m_torus->setMinorRadius(0.4f);
    m_torus->setRings(100);
    m_torus->setSlices(20);
    //! [0]

    // TorusMesh Transform
    //! [1]
    Qt3DCore::QTransform *torusTransform = new Qt3DCore::QTransform();
    torusTransform->setScale(2.0f);
    torusTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(0.0f, 1.0f, 0.0f), 25.0f));
    torusTransform->setTranslation(QVector3D(5.0f, 4.0f, 0.0f));
    //! [1]

    //! [2]
    Qt3DExtras::QPhongMaterial *torusMaterial = new Qt3DExtras::QPhongMaterial();
    torusMaterial->setDiffuse(QColor(QRgb(0xbeb32b)));
    //! [2]

    // Torus
    //! [3]
    m_torusEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_torusEntity->addComponent(m_torus);
    m_torusEntity->addComponent(torusMaterial);
    m_torusEntity->addComponent(torusTransform);
    //! [3]

    // Cone shape data
    Qt3DExtras::QConeMesh *cone = new Qt3DExtras::QConeMesh();
    cone->setTopRadius(0.5);
    cone->setBottomRadius(1);
    cone->setLength(3);
    cone->setRings(50);
    cone->setSlices(20);

    // ConeMesh Transform
    Qt3DCore::QTransform *coneTransform = new Qt3DCore::QTransform();
    coneTransform->setScale(1.5f);
    coneTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
    coneTransform->setTranslation(QVector3D(0.0f, 4.0f, -1.5));

    Qt3DExtras::QPhongMaterial *coneMaterial = new Qt3DExtras::QPhongMaterial();
    coneMaterial->setDiffuse(QColor(QRgb(0x928327)));

    // Cone
    m_coneEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_coneEntity->addComponent(cone);
    m_coneEntity->addComponent(coneMaterial);
    m_coneEntity->addComponent(coneTransform);

    // Cylinder shape data
    Qt3DExtras::QCylinderMesh *cylinder = new Qt3DExtras::QCylinderMesh();
    cylinder->setRadius(1);
    cylinder->setLength(3);
    cylinder->setRings(100);
    cylinder->setSlices(20);

    // CylinderMesh Transform
    Qt3DCore::QTransform *cylinderTransform = new Qt3DCore::QTransform();
    cylinderTransform->setScale(1.5f);
    cylinderTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
    cylinderTransform->setTranslation(QVector3D(-5.0f, 4.0f, -1.5));

    Qt3DExtras::QPhongMaterial *cylinderMaterial = new Qt3DExtras::QPhongMaterial();
    cylinderMaterial->setDiffuse(QColor(QRgb(0x928327)));

    // Cylinder
    m_cylinderEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_cylinderEntity->addComponent(cylinder);
    m_cylinderEntity->addComponent(cylinderMaterial);
    m_cylinderEntity->addComponent(cylinderTransform);

    // Cuboid shape data
    Qt3DExtras::QCuboidMesh *cuboid = new Qt3DExtras::QCuboidMesh();

    // CuboidMesh Transform
    Qt3DCore::QTransform *cuboidTransform = new Qt3DCore::QTransform();
    cuboidTransform->setScale(4.0f);
    cuboidTransform->setTranslation(QVector3D(5.0f, -4.0f, 0.0f));

    Qt3DExtras::QPhongMaterial *cuboidMaterial = new Qt3DExtras::QPhongMaterial();
    cuboidMaterial->setDiffuse(QColor(QRgb(0x665423)));

    //Cuboid
    m_cuboidEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_cuboidEntity->addComponent(cuboid);
    m_cuboidEntity->addComponent(cuboidMaterial);
    m_cuboidEntity->addComponent(cuboidTransform);

    // Plane shape data
    Qt3DExtras::QPlaneMesh *planeMesh = new Qt3DExtras::QPlaneMesh();
    planeMesh->setWidth(2);
    planeMesh->setHeight(2);

    // Plane mesh transform
    Qt3DCore::QTransform *planeTransform = new Qt3DCore::QTransform();
    planeTransform->setScale(1.3f);
    planeTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
    planeTransform->setTranslation(QVector3D(0.0f, -4.0f, 0.0f));

    Qt3DExtras::QPhongMaterial *planeMaterial = new Qt3DExtras::QPhongMaterial();
    planeMaterial->setDiffuse(QColor(QRgb(0xa69929)));

    // Plane
    m_planeEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_planeEntity->addComponent(planeMesh);
    m_planeEntity->addComponent(planeMaterial);
    m_planeEntity->addComponent(planeTransform);

    // Sphere shape data
    Qt3DExtras::QSphereMesh *sphereMesh = new Qt3DExtras::QSphereMesh();
    sphereMesh->setRings(20);
    sphereMesh->setSlices(20);
    sphereMesh->setRadius(2);

    // Sphere mesh transform
    Qt3DCore::QTransform *sphereTransform = new Qt3DCore::QTransform();

    sphereTransform->setScale(1.3f);
    sphereTransform->setTranslation(QVector3D(-5.0f, -4.0f, 0.0f));

    Qt3DExtras::QPhongMaterial *sphereMaterial = new Qt3DExtras::QPhongMaterial();
    sphereMaterial->setDiffuse(QColor(QRgb(0xa69929)));

    // Sphere
    m_sphereEntity = new Qt3DCore::QEntity(m_rootEntity);
    m_sphereEntity->addComponent(sphereMesh);
    m_sphereEntity->addComponent(sphereMaterial);
    m_sphereEntity->addComponent(sphereTransform);
}