/// isInOneLiveRange - Return true if the range specified is entirely in
/// a single LiveRange of the live interval.
bool LiveInterval::isInOneLiveRange(SlotIndex Start, SlotIndex End) {
Ranges::iterator I = std::upper_bound(ranges.begin(), ranges.end(), Start);
if (I == ranges.begin())
return false;
--I;
return I->containsRange(Start, End);
}
/// removeRange - Remove the specified range from this interval. Note that
/// the range must already be in this interval in its entirety.
void LiveInterval::removeRange(unsigned Start, unsigned End) {
// Find the LiveRange containing this span.
Ranges::iterator I = std::upper_bound(ranges.begin(), ranges.end(), Start);
assert(I != ranges.begin() && "Range is not in interval!");
--I;
assert(I->contains(Start) && I->contains(End-1) &&
"Range is not entirely in interval!");
// If the span we are removing is at the start of the LiveRange, adjust it.
if (I->start == Start) {
if (I->end == End)
ranges.erase(I); // Removed the whole LiveRange.
else
I->start = End;
return;
}
// Otherwise if the span we are removing is at the end of the LiveRange,
// adjust the other way.
if (I->end == End) {
I->end = Start;
return;
}
// Otherwise, we are splitting the LiveRange into two pieces.
unsigned OldEnd = I->end;
I->end = Start; // Trim the old interval.
// Insert the new one.
ranges.insert(next(I), LiveRange(End, OldEnd, I->ValId));
}
/// isInOneLiveRange - Return true if the range specified is entirely in the
/// a single LiveRange of the live interval.
bool LiveInterval::isInOneLiveRange(unsigned Start, unsigned End) {
Ranges::iterator I = std::upper_bound(ranges.begin(), ranges.end(), Start);
if (I == ranges.begin())
return false;
--I;
return I->contains(Start) && I->contains(End-1);
}
/// removeRange - Remove the specified range from this interval. Note that
/// the range must be in a single LiveRange in its entirety.
void LiveInterval::removeRange(unsigned Start, unsigned End,
bool RemoveDeadValNo) {
// Find the LiveRange containing this span.
Ranges::iterator I = std::upper_bound(ranges.begin(), ranges.end(), Start);
assert(I != ranges.begin() && "Range is not in interval!");
--I;
assert(I->contains(Start) && I->contains(End-1) &&
"Range is not entirely in interval!");
// If the span we are removing is at the start of the LiveRange, adjust it.
VNInfo *ValNo = I->valno;
if (I->start == Start) {
if (I->end == End) {
removeKills(I->valno, Start, End);
if (RemoveDeadValNo) {
// Check if val# is dead.
bool isDead = true;
for (const_iterator II = begin(), EE = end(); II != EE; ++II)
if (II != I && II->valno == ValNo) {
isDead = false;
break;
}
if (isDead) {
// Now that ValNo is dead, remove it. If it is the largest value
// number, just nuke it (and any other deleted values neighboring it),
// otherwise mark it as ~1U so it can be nuked later.
if (ValNo->id == getNumValNums()-1) {
do {
VNInfo *VNI = valnos.back();
valnos.pop_back();
VNI->~VNInfo();
} while (!valnos.empty() && valnos.back()->def == ~1U);
} else {
ValNo->def = ~1U;
}
}
}
ranges.erase(I); // Removed the whole LiveRange.
} else
I->start = End;
return;
}
// Otherwise if the span we are removing is at the end of the LiveRange,
// adjust the other way.
if (I->end == End) {
removeKills(ValNo, Start, End);
I->end = Start;
return;
}
// Otherwise, we are splitting the LiveRange into two pieces.
unsigned OldEnd = I->end;
I->end = Start; // Trim the old interval.
// Insert the new one.
ranges.insert(next(I), LiveRange(End, OldEnd, ValNo));
}
/// removeRange - Remove the specified range from this interval. Note that
/// the range must be in a single LiveRange in its entirety.
void LiveInterval::removeRange(SlotIndex Start, SlotIndex End,
bool RemoveDeadValNo) {
// Find the LiveRange containing this span.
Ranges::iterator I = std::upper_bound(ranges.begin(), ranges.end(), Start);
assert(I != ranges.begin() && "Range is not in interval!");
--I;
assert(I->containsRange(Start, End) && "Range is not entirely in interval!");
// If the span we are removing is at the start of the LiveRange, adjust it.
VNInfo *ValNo = I->valno;
if (I->start == Start) {
if (I->end == End) {
if (RemoveDeadValNo) {
// Check if val# is dead.
bool isDead = true;
for (const_iterator II = begin(), EE = end(); II != EE; ++II)
if (II != I && II->valno == ValNo) {
isDead = false;
break;
}
if (isDead) {
// Now that ValNo is dead, remove it.
markValNoForDeletion(ValNo);
}
}
ranges.erase(I); // Removed the whole LiveRange.
} else
I->start = End;
return;
}
// Otherwise if the span we are removing is at the end of the LiveRange,
// adjust the other way.
if (I->end == End) {
I->end = Start;
return;
}
// Otherwise, we are splitting the LiveRange into two pieces.
SlotIndex OldEnd = I->end;
I->end = Start; // Trim the old interval.
// Insert the new one.
ranges.insert(llvm::next(I), LiveRange(End, OldEnd, ValNo));
}
/** Adds a new number range. The range describes a mapping from c to v(c), where
* \f$c \in [cmin,cmax]\f$ and \f$v(cmin):=vmin, v(c):=vmin+c-cmin\f$.
* @param[in] cmin smallest number in the range
* @param[in] cmax largest number in the range
* @param[in] vmin map value of cmin */
void RangeMap::addRange (UInt32 cmin, UInt32 cmax, UInt32 vmin) {
if (cmin > cmax)
swap(cmin, cmax);
Range range(cmin, cmax, vmin);
if (_ranges.empty())
_ranges.push_back(range);
else {
// check for simple cases that can be handled pretty fast
Range &lrange = *_ranges.begin();
Range &rrange = *_ranges.rbegin();
if (cmin > rrange.max()) { // non-overlapping range at end of vector?
if (!rrange.join(range))
_ranges.push_back(range);
}
else if (cmax < lrange.min()) { // non-overlapping range at begin of vector?
if (!lrange.join(range))
_ranges.insert(_ranges.begin(), range);
}
else {
// ranges overlap and/or must be inserted somewhere inside the vector
Ranges::iterator it = lower_bound(_ranges.begin(), _ranges.end(), range);
const bool at_end = (it == _ranges.end());
if (at_end)
--it;
if (!it->join(range) && (it == _ranges.begin() || !(it-1)->join(range))) {
if (it->min() < cmin && it->max() > cmax) { // new range completely inside an existing range?
//split existing range
UInt32 itmax = it->max();
it->max(cmin-1);
it = _ranges.insert(it+1, Range(cmax+1, itmax, it->valueAt(cmax+1)));
}
else if (at_end) // does new range overlap right side of last range in vector?
it = _ranges.end(); // => append new range at end of vector
it = _ranges.insert(it, range);
}
adaptNeighbors(it); // resolve overlaps
}
}
}
/** Adapts the left and right neighbor elements of a newly inserted range.
* The new range could overlap ranges in the neighborhood so that those must be
* adapted or removed. All ranges in the range vector are ordered ascendingly, i.e.
* [min_1, max_1],...,[min_n, max_n] where min_i < min_j for all i < j.
* @param[in] it pointer to the newly inserted range */
void RangeMap::adaptNeighbors (Ranges::iterator it) {
if (it != _ranges.end()) {
// adapt left neighbor
Ranges::iterator lit = it-1; // points to left neighbor
if (it != _ranges.begin() && it->min() <= lit->max()) {
bool left_neighbor_valid = (it->min() > 0 && it->min()-1 >= lit->min());
if (left_neighbor_valid) // is adapted left neighbor valid?
lit->max(it->min()-1); // => assign new max value
if (!left_neighbor_valid || it->join(*lit))
it = _ranges.erase(lit);
}
// remove right neighbors completely overlapped by *it
Ranges::iterator rit = it+1; // points to right neighbor
while (rit != _ranges.end() && it->max() >= rit->max()) { // complete overlap?
_ranges.erase(rit);
rit = it+1;
}
// adapt rightmost range partially overlapped by *it
if (rit != _ranges.end()) {
if (it->max() >= rit->min())
rit->setMinAndAdaptValue(it->max()+1);
// try to merge right neighbor into *this
if (it->join(*rit))
_ranges.erase(rit); // remove merged neighbor
}
}
}