void Scene::save(stream::OutputStream<stream::SerializationEndian> &strm) const
{
PROFILE;
strm.write(ENGINE_VERSION_MAJOR);
strm.write(ENGINE_VERSION_MINOR);
strm.write(ENGINE_VERSION_PATCH);
strm.write(entities.size());
for (unsigned i = 0; i < entities.size(); ++i)
{
entities[i]->save(strm);
}
}
/** Continuous decompression process.
Not all compressor support this (in that case, it's probably emulated or might return false).
@param outStream The output stream to write to.
@param inStream The input stream to read from.
@param amountToProcess The number of decompressed bytes to reach. Set to 0 to process the whole stream.
@return true on success, false if not supported or an error occurred on the input stream */
bool BSCLib::decompressStream(Stream::OutputStream & outStream, const Stream::InputStream & inStream, const uint32 amountToProcess)
{
// We need to first read the number of blocks
if (!memBuffer || !outBuffer) return setError(NotEnoughMemory);
const size_t minBlockHeaderSize = (sizeof(dataSize) + sizeof(decHeader.recordSize) + sizeof(decHeader.sortingContext) + BSC::HeaderSize);
if (memBuffer->total <= outBuffer->total)
{
// If we were compressing, let's enlarge that
resizeBuffer(minBlockHeaderSize);
decHeader.curBlock = 0;
}
uint32 nBlocks = (uint32)dataSize;
#define POP(X, S) if (inStream.read(X, (uint64)S) != (uint64)S) return setError(Success); // No more data to read
if (dataSize <= 0)
{
POP(&nBlocks, sizeof(nBlocks));
dataSize = nBlocks; // Crude off estimation
memBuffer->empty();
}
if (!nBlocks) return setError(BadFormat);
// Check if we have enough data in our memory block to answer directly
uint64 outSize = amountToProcess ? min((uint64)amountToProcess, outStream.fullSize()) : outStream.fullSize();
if (outSize > 0xFFFFFFFF) outSize = 0xFFFFFFFF; // We can only deal with 4GB at a time
// If we reach here, we have not enough data in the memory block (we need to refill it),
int64 inPos = 0;
do
{
// Check if we have a valid header
if (!decHeader.valid && decHeader.curBlock < nBlocks)
{
if (memBuffer->available() < minBlockHeaderSize
&& (memBuffer->refill(inStream, minBlockHeaderSize - memBuffer->available()) == (size_t)-1 || memBuffer->available() < minBlockHeaderSize))
return setError(UnexpectedEOD);
// The decode the header
#define POPM(X, S) memcpy(X, *memBuffer, S); memBuffer->use(S);
#ifndef BreakCompatibility
POPM(&inPos, sizeof(inPos));
POPM(&decHeader.recordSize, sizeof(decHeader.recordSize));
POPM(&decHeader.sortingContext, sizeof(decHeader.sortingContext));
#endif
// Unsupported features ?
if (decHeader.recordSize < 1 || decHeader.sortingContext < 1 || decHeader.sortingContext > 2) return setError(BadFormat);
// Figure out the block informations
if (opaque->getBlockInfo(*memBuffer, BSC::HeaderSize, decHeader.blockSize, decHeader.dataSize) != BSC::Success)
return setError(BadFormat);
//memBuffer->empty();
decHeader.valid = true;
}
// Check if we have decompressed data ready for output stream direct write
if (outBuffer->available())
{
// Data is ready in the buffer, let's extract it
size_t doneSize = min(outBuffer->available(), (size_t)outSize);
if (outStream.write(*outBuffer, doneSize) != (uint64)doneSize) return setError(UnexpectedEOD);
outBuffer->use(doneSize);
if (doneSize == outSize) break; // Success
outSize -= doneSize;
// If we reach here, then the outBuffer is empty anyway, let's mark as is
outBuffer->empty();
// Need to refill a header now
continue;
}
// We need to fetch a complete buffer from the input stream
size_t need = decHeader.blockSize - memBuffer->available();
if (memBuffer->refill(inStream, need) != need)
{
// Could not read enough from the input stream to fill a block.
// Let's output the amount we succeed to write from it.
if (amountToProcess - outSize > 0) return setError(Success);
return setError(UnexpectedEOD);
}
if (decHeader.dataSize != 0 && decHeader.curBlock < dataSize)
{
// Now decompress the cruft
BSC::Error err = opaque->decompress(*memBuffer, decHeader.blockSize, *outBuffer, decHeader.dataSize);
if (err != BSC::Success)
return err == BSC::NotEnoughMemory ? setError(NotEnoughMemory) : setError(DataCorrupt);
// Depending on the sorting context, we might need to reverse the blocks
err = opaque->postProcess(*outBuffer, decHeader.dataSize, decHeader.sortingContext, decHeader.recordSize);
if (err != BSC::Success)
return err == BSC::NotEnoughMemory ? setError(NotEnoughMemory) : setError(DataCorrupt);
outBuffer->setFill(decHeader.dataSize);
memBuffer->empty(); // Done with this data buffer
decHeader.valid = false; // The block header is now invalid too
decHeader.curBlock++;
}
else break; // No more data to decompress
} while (true);
#undef POP
// Check if we've finished sending the complete decompressed input stream
if (decHeader.curBlock == dataSize && outBuffer->available() == 0)
{
// We can reset the decompression stream if it needs to be re-used
decHeader.curBlock = 0;
dataSize = 0;
}
if (outBuffer->available() == 0) outBuffer->empty();
return setError(Success);
}
bool BSCLib::compressStream(Stream::OutputStream & outStream, const Stream::InputStream & inStream, const uint32 amountToProcess, const bool lastCall)
{
if (!memBuffer || !outBuffer) return setError(NotEnoughMemory);
// If we were decompressing, let's change that
if (decHeader.valid) { resizeBuffer(); decHeader.valid = false; }
// Detect end of buffer
// Try to be smart, else try to read as much as possible
uint64 inSize = amountToProcess ? min((uint64)amountToProcess, inStream.fullSize()) : inStream.fullSize();
if (inSize == 0)
{
if (!dataSize && !memBuffer->available()) return true;
// Need to process the remaining block, if any
if (!processBlock(outStream)) return false;
// End of stream, let's rewind and write the header
if (outStream.setPosition(0))
{
uint32 nBlocks = (uint32)((dataSize + getBufferSize() - 1) / getBufferSize());
PUSH(&nBlocks, sizeof(nBlocks));
dataSize = 0;
headerWritten = false;
}
return true;
}
// Check if we need to write the number of blocks now (or not)
if (!headerWritten)
{
// Safety first
if (dataSize == 0 && !outStream.setPosition(outStream.currentPosition()))
{
// If you don't provide the input size and the output stream can not be rewind to save
// the header in the end, then it'll not work.
Assert(dataSize == 0 && outStream.setPosition(outStream.currentPosition()));
return false;
}
uint32 nBlocks = (uint32)((-dataSize + getBufferSize() - 1) / getBufferSize()); //blockSize > 0 ? (uint32)((inSize + blockSize - 1) / blockSize) : 0;
PUSH(&nBlocks, sizeof(nBlocks));
dataSize = 0;
headerWritten = true;
}
// Check if we can cache the data to avoid small compression block
if (!lastCall && memBuffer->canFit(inSize))
{ // Accumulate the input stream
return memBuffer->refill(inStream, inSize) == inSize;
}
while ((int64)inSize > 0)
{
// Read as much as possible to the memory buffer, and save that
size_t readSize = memBuffer->available();
if (!memBuffer->full())
{
readSize = memBuffer->refill(inStream, inSize);
inSize -= (uint64)readSize;
}
if (memBuffer->available() >= getBufferSize() || lastCall)
{
if (!processBlock(outStream)) return false;
}
}
return setError(Success);
}
void Handle::save(stream::OutputStream<stream::SerializationEndian> &strm) const
{
strm.write(id);
}
