void AJ_Disconnect(AJ_BusAttachment* bus)
{
/*
* We won't be getting any more method replies.
*/
AJ_ReleaseReplyContexts();
/*
* Disconnect the network closing sockets etc.
*/
AJ_Net_Disconnect(&bus->sock);
#ifdef AJ_SERIAL_CONNECTION
AJ_SerialShutdown();
#endif
/*
* Clear auth context
*/
AJ_ClearAuthContext();
/*
* Set the routing nodes proto version to zero (not connected)
*/
routingProtoVersion = 0;
}
void AJ_Disconnect(AJ_BusAttachment* bus)
{
/*
* We won't be getting any more method replies.
*/
AJ_ReleaseReplyContexts();
/*
* Disconnect the network closing sockets etc.
*/
AJ_Net_Disconnect(&bus->sock);
#ifdef AJ_SERIAL_CONNECTION
AJ_SerialShutdown();
#endif
}
AJ_Status AJ_FindBusAndConnect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d.)\n", bus, serviceName, timeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_IPV4;
#elif defined ARDUINO
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_IPV4;
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined AJ_SERIAL_CONNECTION
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(&bus->sock, service.ipv4port, service.addrTypes & AJ_ADDR_IPV4, &service.ipv4);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
// subscribe to the signal NameOwnerChanged and wait for the response
status = AJ_BusSetSignalRule(bus, "type='signal',member='NameOwnerChanged',interface='org.freedesktop.DBus'", AJ_BUS_SIGNAL_ALLOW);
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
int AJ_Main()
{
AJ_Status status;
while (1) {
int windows = 1 << (rand() % 3); // randomize window width 1,2,4
int blocksize = 50 + (rand() % 1000); // randomize packet size 50 - 1050
AJ_AlwaysPrintf(("Windows:%i Blocksize:%i\n", windows, blocksize));
txBuffer = (uint8_t*) AJ_Malloc(blocksize);
rxBuffer = (uint8_t*) AJ_Malloc(blocksize);
memset(txBuffer, 0x41, blocksize);
memset(rxBuffer, 'r', blocksize);
#ifdef READTEST
status = AJ_SerialInit("/dev/ttyUSB0", BITRATE, windows, blocksize);
#else
status = AJ_SerialInit("/dev/ttyUSB1", BITRATE, windows, blocksize);
#endif
AJ_AlwaysPrintf(("serial init was %u\n", status));
if (status != AJ_OK) {
continue; // init failed perhaps from bad parameters, start the loop again
}
// Change the buffer transmission function to one that fuzzes the output.
AJ_SetTxSerialTransmit(&FuzzBuffer);
#ifdef READTEST
AJ_Sleep(2000); // wait for the writing side to be running, this should test the queuing of data.
// try to read everything at once
int i = 0;
while (1) {
AJ_SerialRecv(rxBuffer, blocksize, 50000, NULL);
}
AJ_DumpBytes("Post serial recv", rxBuffer, blocksize);
AJ_Sleep(500);
#else
AJ_Sleep(5000);
int i = 0;
while (1) {
// change the packet to be sent every time through the loop.
memset(txBuffer, 0x41 + (i % 26), blocksize);
memset(rxBuffer, 0x41 + (i % 26), blocksize);
AJ_SerialSend(txBuffer, blocksize);
++i;
if (i % 20 == 0) {
AJ_AlwaysPrintf(("Hit iteration %d\n", i));
break;
}
AJ_SerialRecv(rxBuffer, blocksize, 5000, NULL);
}
AJ_AlwaysPrintf(("post serial send\n"));
#endif
// clean up and start again
AJ_SerialShutdown();
AJ_Free(txBuffer);
AJ_Free(rxBuffer);
}
return(0);
}
AJ_Status AJ_FindBusAndConnect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
AJ_Time connectionTimer;
int32_t connectionTime;
uint8_t finished = FALSE;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_FindBusAndConnect(bus=0x%p, serviceName=\"%s\", timeout=%d, selection timeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
bus->isProbeRequired = TRUE;
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
while (finished == FALSE) {
finished = TRUE;
connectionTime = (int32_t) timeout;
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#elif defined(ARDUINO)
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_TCP4;
AJ_InitTimer(&connectionTimer);
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Connection timer started\n"));
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined(AJ_SERIAL_CONNECTION)
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
AJ_InitTimer(&connectionTimer);
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Connection timer started\n"));
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
// this calls into platform code that will decide whether to use UDP or TCP, based on what is available
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
#if !AJ_CONNECT_LOCALHOST && !defined(ARDUINO) && !defined(AJ_SERIAL_CONNECTION)
if ((status == AJ_ERR_ACCESS_ROUTING_NODE) || (status == AJ_ERR_OLD_VERSION)) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Blacklisting routing node\n"));
AddRoutingNodeToBlacklist(&service, AJ_ADDR_TCP4);
}
AJ_Disconnect(bus);
// try again
finished = FALSE;
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
// select a new node from the response list
while (connectionTime > 0) {
status = AJ_SelectRoutingNodeFromResponseList(&service);
if (status == AJ_ERR_END_OF_DATA) {
status = AJ_ERR_TIMEOUT;
AJ_InfoPrintf(("Exhausted all the retries from the response list\n"));
finished = FALSE;
break;
}
AJ_InfoPrintf(("Retrying with a new selection from the routing node response list\n"));
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = AJ_Authenticate(bus);
if (status == AJ_OK) {
finished = TRUE;
break;
}
if ((status == AJ_ERR_ACCESS_ROUTING_NODE) || (status == AJ_ERR_OLD_VERSION)) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Blacklisting another routing node\n"));
AddRoutingNodeToBlacklist(&service, AJ_ADDR_TCP4);
}
AJ_Disconnect(bus);
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
}
#endif
}
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): SetSignalRules status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
AJ_InitRoutingNodeResponselist();
}
ExitConnect:
AJ_InitRoutingNodeResponselist();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
// TODO: deprecate this function; replace it with AJ_FindBusAndConnect
AJ_Status AJ_Connect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
bus->isAuthenticated = FALSE;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d, selectionTimeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
#if !(defined(ARDUINO) || defined(__linux) || defined(_WIN32) || defined(__MACH__))
/*
* Get an IP address. We don't want to break this older version
* of AJ_Connect, so acquire an IP if we don't already have one.
*
* This does not work on non-embedded platforms!
*/
{
uint32_t ip, mask, gw;
status = AJ_AcquireIPAddress(&ip, &mask, &gw, AJ_DHCP_TIMEOUT);
if (status != AJ_OK) {
AJ_ErrPrintf(("AJ_Net_Up(): AJ_AcquireIPAddress Failed\n"));
}
}
#endif
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#elif defined(ARDUINO)
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_TCP4;
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined(AJ_SERIAL_CONNECTION)
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
// in a way that depends on the target
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): SetSignalRules status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
AJ_InitRoutingNodeResponselist();
return status;
}
static AJ_Status ConnectToBus(AJ_BusAttachment* bus)
{
AJ_Status status;
AJ_Service service;
uint32_t timeout = AJ_CONNECT_TIMEOUT;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d.)\n", bus, serviceName, timeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* First we need to discover a routing node. This is done with the function AJ_Discover.
* It will store the connection information in the AJ_Service struct.
*/
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_IPV4;
#elif defined ARDUINO
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_IPV4;
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined AJ_SERIAL_CONNECTION
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
/*
* Now that we have discovered a routing node, we can connect to it. This is done with AJ_Net_Connect.
*/
status = AJ_Net_Connect(&bus->sock, service.ipv4port, service.addrTypes & AJ_ADDR_IPV4, &service.ipv4);
if (status != AJ_OK) {
// or retry discovery to find another node that will accept our connection
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
/*
* We are connected to a routing node! We still need to authenticate with it
* before it will route our messages.
*/
status = AJ_Authenticate(bus);
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
