static jint nativeJAnt_Create(JNIEnv *env, jobject obj)
{
ANTStatus antStatus = ANT_STATUS_FAILED;
(void)env; //unused warning
(void)obj; //unused warning
ANT_FUNC_START();
antStatus = ant_init();
if (antStatus)
{
ANT_DEBUG_D("failed to init ANT stack");
goto CLEANUP;
}
antStatus = set_ant_rx_callback(nativeJAnt_RxCallback);
if (antStatus)
{
ANT_DEBUG_D("failed to set ANT rx callback");
goto CLEANUP;
}
antStatus = set_ant_state_callback(nativeJAnt_StateCallback);
if (antStatus)
{
ANT_DEBUG_D("failed to set ANT state callback");
goto CLEANUP;
}
CLEANUP:
ANT_FUNC_END();
return antStatus;
}
int ant_disable(void)
{
int iRet = -1;
ant_channel_type eChannel;
ANT_FUNC_START();
stRxThreadInfo.ucRunThread = 0;
if (stRxThreadInfo.stRxThread != 0) {
ANT_DEBUG_I("Sending shutdown signal to rx thread.");
if(write(stRxThreadInfo.iRxShutdownEventFd, &EVENT_FD_PLUS_ONE, sizeof(EVENT_FD_PLUS_ONE)) < 0)
{
ANT_ERROR("failed to signal rx thread with eventfd. Reason: %s", strerror(errno));
goto out;
}
ANT_DEBUG_I("Waiting for rx thread to finish.");
if (pthread_join(stRxThreadInfo.stRxThread, NULL) < 0) {
ANT_ERROR("failed to join rx thread: %s", strerror(errno));
goto out;
}
} else {
ANT_DEBUG_D("rx thread is not running");
}
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
ant_disable_channel(&stRxThreadInfo.astChannels[eChannel]);
}
iRet = 0;
out:
stRxThreadInfo.stRxThread = 0;
ANT_FUNC_END();
return iRet;
}
static jint nativeJAnt_TxMessage(JNIEnv *env, jobject obj, jbyteArray msg)
{
(void)obj; //unused warning
ANT_FUNC_START();
if (msg == NULL)
{
if (jniThrowException(env, "java/lang/NullPointerException", NULL))
{
ANT_ERROR("Unable to throw NullPointerException");
}
return -1;
}
jbyte* msgBytes = env->GetByteArrayElements(msg, NULL);
jint msgLength = env->GetArrayLength(msg);
ANTStatus status = ant_tx_message((ANT_U8) msgLength, (ANT_U8 *)msgBytes);
ANT_DEBUG_D("nativeJAnt_TxMessage: ant_tx_message() returned %d", (int)status);
env->ReleaseByteArrayElements(msg, msgBytes, JNI_ABORT);
ANT_FUNC_END();
return status;
}
void nativeJAnt_StateCallback(ANTRadioEnabledStatus uiNewState)
{
JNIEnv* env = NULL;
jint jNewState = uiNewState;
ANT_BOOL iShouldDetach = ANT_FALSE;
ANT_FUNC_START();
g_jVM->GetEnv((void**) &env, JNI_VERSION_1_4);
if (env == NULL)
{
ANT_DEBUG_D("nativeJAnt_StateCallback: called from rx thread, attaching to VM");
g_jVM->AttachCurrentThread((&env), NULL);
if (env == NULL)
{
ANT_DEBUG_E("nativeJAnt_StateCallback: failed to attach rx thread to VM");
return;
}
iShouldDetach = ANT_TRUE;
}
else
{
ANT_DEBUG_D("nativeJAnt_StateCallback: called from java enable/disable"
", already attached, don't detach");
}
ANT_DEBUG_V("nativeJAnt_StateCallback: Calling java state callback");
env->CallStaticVoidMethod(g_sJClazz, g_sMethodId_nativeCb_AntStateChange, jNewState);
ANT_DEBUG_V("nativeJAnt_StateCallback: Called java state callback");
if (env->ExceptionOccurred())
{
ANT_ERROR("nativeJAnt_StateCallback: Calling Java nativeCb_AntStateChange failed");
env->ExceptionDescribe();
env->ExceptionClear();
}
if (iShouldDetach)
{
ANT_DEBUG_D("nativeJAnt_StateCallback: env was attached, detaching");
g_jVM->DetachCurrentThread();
}
ANT_FUNC_END();
return;
}
static jint nativeJAnt_Destroy(JNIEnv *env, jobject obj)
{
(void)env; //unused warning
(void)obj; //unused warning
ANTStatus status;
ANT_FUNC_START();
ANT_DEBUG_D("nativeJAnt_Destroy(): calling ant_deinit");
status = ant_deinit();
if (status)
{
ANT_DEBUG_D("failed to deinit ANT stack returned %d",(int)status);
return status;
}
else
{
ANT_DEBUG_D("deinit ANT stack Success");
}
ANT_FUNC_END();
return status;
}
int ant_enable(void)
{
int iRet = -1;
ant_channel_type eChannel;
ANT_FUNC_START();
// Reset the shutdown signal.
uint64_t counter;
ssize_t result = read(stRxThreadInfo.iRxShutdownEventFd, &counter, sizeof(counter));
// EAGAIN result indicates that the counter was already 0 in non-blocking mode.
if(result < 0 && errno != EAGAIN)
{
ANT_ERROR("Could not clear shutdown signal in enable. Reason: %s", strerror(errno));
goto out;
}
stRxThreadInfo.ucRunThread = 1;
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
if (ant_enable_channel(&stRxThreadInfo.astChannels[eChannel]) < 0) {
ANT_ERROR("failed to enable channel %s: %s",
stRxThreadInfo.astChannels[eChannel].pcDevicePath,
strerror(errno));
goto out;
}
}
if (stRxThreadInfo.stRxThread == 0) {
if (pthread_create(&stRxThreadInfo.stRxThread, NULL, fnRxThread, &stRxThreadInfo) < 0) {
ANT_ERROR("failed to start rx thread: %s", strerror(errno));
goto out;
}
} else {
ANT_DEBUG_D("rx thread is already running");
}
if (!stRxThreadInfo.ucRunThread) {
ANT_ERROR("rx thread crashed during init");
goto out;
}
iRet = 0;
out:
ANT_FUNC_END();
return iRet;
}
ANTRadioEnabledStatus ant_radio_enabled_status(void)
{
ant_channel_type eChannel;
int iOpenFiles = 0;
int iOpenThread;
ANTRadioEnabledStatus uiRet = RADIO_STATUS_UNKNOWN;
ANT_FUNC_START();
if (stRxThreadInfo.ucChipResetting) {
uiRet = RADIO_STATUS_RESETTING;
goto out;
}
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
if (stRxThreadInfo.astChannels[eChannel].iFd != -1) {
iOpenFiles++;
}
}
iOpenThread = (stRxThreadInfo.stRxThread) ? 1 : 0;
if (!stRxThreadInfo.ucRunThread) {
if (iOpenFiles || iOpenThread) {
uiRet = RADIO_STATUS_DISABLING;
} else {
uiRet = RADIO_STATUS_DISABLED;
}
} else {
if ((iOpenFiles == NUM_ANT_CHANNELS) && iOpenThread) {
uiRet = RADIO_STATUS_ENABLED;
} else if (!iOpenFiles && iOpenThread) {
uiRet = RADIO_STATUS_UNKNOWN;
} else {
uiRet = RADIO_STATUS_ENABLING;
}
}
out:
ANT_DEBUG_D("get radio enabled status returned %d", uiRet);
ANT_FUNC_END();
return uiRet;
}
static void ant_disable_channel(ant_channel_info_t *pstChnlInfo)
{
ANT_FUNC_START();
if (!pstChnlInfo) {
ANT_ERROR("null channel info passed to channel disable function");
goto out;
}
if (pstChnlInfo->iFd != -1) {
// Use the new init_transport function instead of open() to get our fd.
if (init_transport_bdroid(0) < 0) {
ANT_ERROR("failed to close channel %s(%#x): %s", pstChnlInfo->pcDevicePath, pstChnlInfo->iFd, strerror(errno));
}
pstChnlInfo->iFd = -1; //TODO can this overwrite a still valid fd?
} else {
ANT_DEBUG_D("%s file is already closed", pstChnlInfo->pcDevicePath);
}
out:
ANT_FUNC_END();
}
static int ant_enable_channel(ant_channel_info_t *pstChnlInfo)
{
int iRet = -1;
ANT_FUNC_START();
if (!pstChnlInfo) {
ANT_ERROR("null channel info passed to channel enable function");
errno = EINVAL;
goto out;
}
if (pstChnlInfo->iFd == -1) {
// Use the init_transport function to release our fd instead of close()
pstChnlInfo->iFd = init_transport_bdroid(1);
if (pstChnlInfo->iFd < 0) {
ANT_ERROR("failed to open dev %s: %s", pstChnlInfo->pcDevicePath, strerror(errno));
goto out;
}
} else {
ANT_DEBUG_D("%s is already enabled", pstChnlInfo->pcDevicePath);
}
iRet = 0;
out:
ANT_FUNC_END();
return iRet;
}
/*
* This thread opens a Bluez HCI socket and waits for ANT messages.
*/
void *ANTHCIRxThread(void *pvHCIDevice)
{
int ret = ANT_STATUS_SUCCESS;
int rxSocket;
int len;
unsigned char buf[HCI_MAX_EVENT_SIZE];
int result;
struct hci_filter eventVendorFilter;
ANT_FUNC_START();
(void)pvHCIDevice; //unused waring
ANT_DEBUG_D("Entering ANTHCIRxThread");
rxSocket = create_hci_sock();
if (rxSocket < 0)
{
ANT_DEBUG_E("can't open HCI socket in rx thread: %s", strerror(errno));
ret = ANT_STATUS_FAILED;
goto out;
}
eventVendorFilter.type_mask = TYPE_MASK_EVENT_PACKET;
eventVendorFilter.event_mask[0] = 0;
eventVendorFilter.event_mask[1] = EVENT_MASK_1_EVENT_VENDOR;
eventVendorFilter.opcode = htobs(ANT_EVENT_VENDOR_CODE);
if (setsockopt(rxSocket, SOL_HCI, HCI_FILTER, &eventVendorFilter, sizeof(eventVendorFilter)) < 0)
{
ANT_ERROR("failed to set socket options: %s", strerror(errno));
ret = ANT_STATUS_FAILED;
goto close;
}
/* continue running as long as not terminated */
while (get_and_set_radio_status() == RADIO_STATUS_ENABLED)
{
struct pollfd p;
int n;
p.fd = rxSocket;
p.events = POLLIN;
ANT_DEBUG_V(" RX: Polling HCI for data...");
/* poll socket, wait for ANT messages */
while ((n = poll(&p, 1, 2500)) == -1)
{
if (errno == EAGAIN || errno == EINTR)
continue;
ANT_ERROR("failed to poll socket: %s", strerror(errno));
ret = ANT_STATUS_FAILED;
goto close;
}
/* we timeout once in a while */
/* this let's us the chance to check if we were terminated */
if (0 == n)
{
ANT_DEBUG_V(" RX: Timeout");
continue;
}
ANT_DEBUG_D("New HCI data available, reading...");
/* read newly arrived data */
/* TBD: rethink assumption about single arrival */
while ((len = read(rxSocket, buf, sizeof(buf))) < 0)
{
if (errno == EAGAIN || errno == EINTR)
continue;
ANT_ERROR("failed to read socket: %s", strerror(errno));
ret = ANT_STATUS_FAILED;
goto close;
}
hci_event_packet_t *event_packet = (hci_event_packet_t *)buf;
int hci_payload_len = validate_hci_event_packet(event_packet, len);
if (hci_payload_len == -1)
{
// part of the message is incorrect, ignore it. validate_event_packet will log error
continue;
}
ANT_SERIAL(event_packet->hci_payload, hci_payload_len, 'R');
if(RxParams.pfRxCallback != NULL)
{
RxParams.pfRxCallback(hci_payload_len, event_packet->hci_payload);
}
else
{
ANT_ERROR("Can't send rx message - no callback registered");
}
}
close:
result = pthread_mutex_trylock(&enableLock);
ANT_DEBUG_D("rx thread close: trylock enableLock returned %d", result);
if (result == 0)
{
ANT_DEBUG_W("rx thread socket has unexpectedly crashed");
#if USE_EXTERNAL_POWER_LIBRARY
if (RxParams.pfStateCallback)
RxParams.pfStateCallback(RADIO_STATUS_DISABLING);
ant_disable();
get_and_set_radio_status();
#else
radio_status = RADIO_STATUS_DISABLED;
#endif
RxParams.thread = 0;
pthread_mutex_unlock(&enableLock);
}
else if (result == EBUSY)
{
ANT_DEBUG_V("rx thread socket was closed");
}
else
{
ANT_ERROR("rx thread close: trylock failed: %s", strerror(result));
}
if (-1 == close(rxSocket))
{
ANT_ERROR("failed to close hci device (socket handle=%#x): %s", rxSocket, strerror(errno));
}
else
{
ANT_DEBUG_D("closed hci device (socket handle=%#x)", rxSocket);
}
out:
ANT_FUNC_END();
pthread_exit((void *)ret);
#if defined(ANDROID)
return 0;
#endif
}
/**********************************************************************
* Callback registration
***********************************************************************/
void nativeJAnt_RxCallback(ANT_U8 ucLen, ANT_U8* pucData)
{
JNIEnv* env = NULL;
jbyteArray jAntRxMsg = NULL;
ANT_FUNC_START();
ANT_DEBUG_D( "got message %d bytes", ucLen);
g_jVM->AttachCurrentThread((&env), NULL);
if (env == NULL)
{
ANT_DEBUG_D("nativeJAnt_RxCallback: Entered, env is null");
return; // log error? cleanup?
}
else
{
ANT_DEBUG_D("nativeJAnt_RxCallback: jEnv %p", env);
}
jAntRxMsg = env->NewByteArray(ucLen);
if (jAntRxMsg == NULL)
{
ANT_ERROR("nativeJAnt_RxCallback: Failed creating java byte[]");
goto CLEANUP;
}
env->SetByteArrayRegion(jAntRxMsg,0,ucLen,(jbyte*)pucData);
if (env->ExceptionOccurred())
{
ANT_ERROR("nativeJAnt_RxCallback: ExceptionOccurred during byte[] copy");
goto CLEANUP;
}
ANT_DEBUG_V("nativeJAnt_RxCallback: Calling java rx callback");
env->CallStaticVoidMethod(g_sJClazz, g_sMethodId_nativeCb_AntRxMessage, jAntRxMsg);
ANT_DEBUG_V("nativeJAnt_RxCallback: Called java rx callback");
if (env->ExceptionOccurred())
{
ANT_ERROR("nativeJAnt_RxCallback: Calling Java nativeCb_AntRxMessage failed");
goto CLEANUP;
}
//Delete the local references
if (jAntRxMsg != NULL)
{
env->DeleteLocalRef(jAntRxMsg);
}
ANT_DEBUG_D("nativeJAnt_RxCallback: Exiting, Calling DetachCurrentThread at the END");
g_jVM->DetachCurrentThread();
ANT_FUNC_END();
return;
CLEANUP:
ANT_ERROR("nativeJAnt_RxCallback: Exiting due to failure");
if (jAntRxMsg != NULL)
{
env->DeleteLocalRef(jAntRxMsg);
}
if (env->ExceptionOccurred())
{
env->ExceptionDescribe();
env->ExceptionClear();
}
g_jVM->DetachCurrentThread();
return;
}
int readChannelMsg(ant_channel_type eChannel, ant_channel_info_t *pstChnlInfo)
{
int iRet = -1;
int iRxLenRead;
int iCurrentHciPacketOffset;
int iHciDataSize;
ANT_FUNC_START();
// Keep trying to read while there is an error, and that error is EAGAIN
while (((iRxLenRead = read(pstChnlInfo->iFd, &aucRxBuffer[eChannel][iRxBufferLength[eChannel]], (sizeof(aucRxBuffer[eChannel]) - iRxBufferLength[eChannel]))) < 0)
&& errno == EAGAIN)
;
if (iRxLenRead < 0) {
if (errno == ENODEV) {
ANT_ERROR("%s not enabled, exiting rx thread",
pstChnlInfo->pcDevicePath);
goto out;
} else if (errno == ENXIO) {
ANT_ERROR("%s there is no physical ANT device connected",
pstChnlInfo->pcDevicePath);
goto out;
} else {
ANT_ERROR("%s read thread exiting, unhandled error: %s",
pstChnlInfo->pcDevicePath, strerror(errno));
goto out;
}
} else {
ANT_SERIAL(aucRxBuffer[eChannel], iRxLenRead, 'R');
iRxLenRead += iRxBufferLength[eChannel]; // add existing data on
// if we didn't get a full packet, then just exit
if (iRxLenRead < (aucRxBuffer[eChannel][ANT_HCI_SIZE_OFFSET] + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE)) {
iRxBufferLength[eChannel] = iRxLenRead;
iRet = 0;
goto out;
}
iRxBufferLength[eChannel] = 0; // reset buffer length here since we should have a full packet
#if ANT_HCI_OPCODE_SIZE == 1 // Check the different message types by opcode
ANT_U8 opcode = aucRxBuffer[eChannel][ANT_HCI_OPCODE_OFFSET];
if(ANT_HCI_OPCODE_COMMAND_COMPLETE == opcode) {
// Command Complete, so signal a FLOW_GO
if(setFlowControl(pstChnlInfo, ANT_FLOW_GO)) {
goto out;
}
} else if(ANT_HCI_OPCODE_FLOW_ON == opcode) {
// FLow On, so resend the last Tx
#ifdef ANT_FLOW_RESEND
// Check if there is a message to resend
if(pstChnlInfo->ucResendMessageLength > 0) {
ant_tx_message_flowcontrol_none(eChannel, pstChnlInfo->ucResendMessageLength, pstChnlInfo->pucResendMessage);
} else {
ANT_DEBUG_D("Resend requested by chip, but tx request cancelled");
}
#endif // ANT_FLOW_RESEND
} else if(ANT_HCI_OPCODE_ANT_EVENT == opcode)
// ANT Event, send ANT packet to Rx Callback
#endif // ANT_HCI_OPCODE_SIZE == 1
{
// Received an ANT packet
iCurrentHciPacketOffset = 0;
while(iCurrentHciPacketOffset < iRxLenRead) {
// TODO Allow HCI Packet Size value to be larger than 1 byte
// This currently works as no size value is greater than 255, and little endian
iHciDataSize = aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_SIZE_OFFSET];
if ((iHciDataSize + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iCurrentHciPacketOffset) >
iRxLenRead) {
// we don't have a whole packet
iRxBufferLength[eChannel] = iRxLenRead - iCurrentHciPacketOffset;
memcpy(aucRxBuffer[eChannel], &aucRxBuffer[eChannel][iCurrentHciPacketOffset], iRxBufferLength[eChannel]);
// the increment at the end should push us out of the while loop
} else
#ifdef ANT_MESG_FLOW_CONTROL
if (aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_ID_OFFSET] ==
ANT_MESG_FLOW_CONTROL) {
// This is a flow control packet, not a standard ANT message
if(setFlowControl(pstChnlInfo, \
aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_DATA_OFFSET])) {
goto out;
}
} else
#endif // ANT_MESG_FLOW_CONTROL
{
ANT_U8 *msg = aucRxBuffer[eChannel] + iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET;
ANT_BOOL bIsKeepAliveResponse = memcmp(msg, KEEPALIVE_RESP, sizeof(KEEPALIVE_RESP)/sizeof(ANT_U8)) == 0;
if (bIsKeepAliveResponse) {
ANT_DEBUG_V("Filtered out keepalive response.");
} else if (pstChnlInfo->fnRxCallback != NULL) {
// Loop through read data until all HCI packets are written to callback
pstChnlInfo->fnRxCallback(iHciDataSize, \
msg);
} else {
ANT_WARN("%s rx callback is null", pstChnlInfo->pcDevicePath);
}
}
iCurrentHciPacketOffset = iCurrentHciPacketOffset + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iHciDataSize;
}
}
iRet = 0;
}
out:
ANT_FUNC_END();
return iRet;
}
/*
* This thread waits for ANT messages from a VFS file.
*/
void *fnRxThread(void *ant_rx_thread_info)
{
int iMutexLockResult;
int iPollRet;
ant_rx_thread_info_t *stRxThreadInfo;
struct pollfd astPollFd[NUM_POLL_FDS];
ant_channel_type eChannel;
ANT_FUNC_START();
stRxThreadInfo = (ant_rx_thread_info_t *)ant_rx_thread_info;
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
astPollFd[eChannel].fd = stRxThreadInfo->astChannels[eChannel].iFd;
astPollFd[eChannel].events = EVENTS_TO_LISTEN_FOR;
}
// Fill out poll request for the shutdown signaller.
astPollFd[EVENTFD_IDX].fd = stRxThreadInfo->iRxShutdownEventFd;
astPollFd[EVENTFD_IDX].events = POLL_IN;
// Reset the waiting for response, since we don't want a stale value if we were reset.
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;
/* continue running as long as not terminated */
while (stRxThreadInfo->ucRunThread) {
/* Wait for data available on any file (transport path), shorter wait if we just timed out. */
int timeout = stRxThreadInfo->bWaitingForKeepaliveResponse ? KEEPALIVE_TIMEOUT : ANT_POLL_TIMEOUT;
iPollRet = poll(astPollFd, NUM_POLL_FDS, timeout);
if (!iPollRet) {
if(!stRxThreadInfo->bWaitingForKeepaliveResponse)
{
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_TRUE;
// Keep alive is done on a separate thread so that rxThread can handle flow control during
// the message.
pthread_t thread;
// Don't care if it failed as the consequence is just a missed keep-alive.
pthread_create(&thread, NULL, fnKeepAliveThread, NULL);
// Detach the thread so that we don't need to join it later.
pthread_detach(thread);
ANT_DEBUG_V("poll timed out, checking exit cond");
} else
{
ANT_DEBUG_E("No response to keepalive, attempting recovery.");
doReset(stRxThreadInfo);
goto out;
}
} else if (iPollRet < 0) {
ANT_ERROR("unhandled error: %s, attempting recovery.", strerror(errno));
doReset(stRxThreadInfo);
goto out;
} else {
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_HARD_RESET)) {
ANT_ERROR("Hard reset indicated by %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_CHIP_SHUTDOWN)) {
/* chip reported it was unexpectedly disabled */
ANT_DEBUG_D(
"poll hang-up from %s. exiting rx thread", stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_DATA_AVAILABLE)) {
ANT_DEBUG_D("data on %s. reading it",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
// Doesn't matter what data we received, we know the chip is alive.
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;
if (readChannelMsg(eChannel, &stRxThreadInfo->astChannels[eChannel]) < 0) {
// set flag to exit out of Rx Loop
stRxThreadInfo->ucRunThread = 0;
}
} else if (areAllFlagsSet(astPollFd[eChannel].revents, POLLNVAL)) {
ANT_ERROR("poll was called on invalid file descriptor %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, POLLERR)) {
ANT_ERROR("Unknown error from %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (astPollFd[eChannel].revents) {
ANT_DEBUG_W("unhandled poll result %#x from %s",
astPollFd[eChannel].revents,
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
}
}
// Now check for shutdown signal
if(areAllFlagsSet(astPollFd[EVENTFD_IDX].revents, POLLIN))
{
ANT_DEBUG_I("rx thread caught shutdown signal.");
// reset the counter by reading.
uint64_t counter;
read(stRxThreadInfo->iRxShutdownEventFd, &counter, sizeof(counter));
// don't care if read error, going to close the thread anyways.
stRxThreadInfo->ucRunThread = 0;
} else if (astPollFd[EVENTFD_IDX].revents != 0) {
ANT_ERROR("Shutdown event descriptor had unexpected event: %#x. exiting rx thread.",
astPollFd[EVENTFD_IDX].revents);
stRxThreadInfo->ucRunThread = 0;
}
}
}
/* disable ANT radio if not already disabling */
// Try to get stEnabledStatusLock.
// if you get it then no one is enabling or disabling
// if you can't get it assume something made you exit
ANT_DEBUG_V("try getting stEnabledStatusLock in %s", __FUNCTION__);
iMutexLockResult = pthread_mutex_trylock(stRxThreadInfo->pstEnabledStatusLock);
if (!iMutexLockResult) {
ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);
ANT_WARN("rx thread has unexpectedly crashed, cleaning up");
// spoof our handle as closed so we don't try to join ourselves in disable
stRxThreadInfo->stRxThread = 0;
if (g_fnStateCallback) {
g_fnStateCallback(RADIO_STATUS_DISABLING);
}
ant_disable();
if (g_fnStateCallback) {
g_fnStateCallback(ant_radio_enabled_status());
}
ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
} else if (iMutexLockResult != EBUSY) {
ANT_ERROR("rx thread closing code, trylock on state lock failed: %s",
strerror(iMutexLockResult));
} else {
ANT_DEBUG_V("stEnabledStatusLock busy");
}
out:
ANT_FUNC_END();
#ifdef ANDROID
return NULL;
#endif
}
ANTStatus ant_tx_message(ANT_U8 ucLen, ANT_U8 *pucMesg)
{
ANTStatus status;
/* Socket for sending HCI commands */
int tx_socket = -1;
int lockResult;
ANT_FUNC_START();
ANT_DEBUG_V("getting txLock in %s", __FUNCTION__);
lockResult = pthread_mutex_lock(&txLock);
if (lockResult)
{
ANT_ERROR("ant_tx_message, could not get txLock: %s", strerror(lockResult));
return ANT_STATUS_FAILED;
}
ANT_DEBUG_V("got txLock in %s", __FUNCTION__);
if(RADIO_STATUS_ENABLED != get_and_set_radio_status())
{
ANT_DEBUG_E("ant_tx_message, ANT not enabled - ABORTING. Radio status = %d",
radio_status);
ANT_DEBUG_V("releasing txLock in %s", __FUNCTION__);
pthread_mutex_unlock(&txLock);
ANT_DEBUG_V("released txLock in %s", __FUNCTION__);
return ANT_STATUS_FAILED_BT_NOT_INITIALIZED;
}
// Open socket
tx_socket = ant_open_tx_transport();
if(tx_socket < 0)
{
ANT_ERROR("Could not open Tx socket");
ANT_DEBUG_V("releasing txLock in %s", __FUNCTION__);
pthread_mutex_unlock(&txLock);
ANT_DEBUG_V("released txLock in %s", __FUNCTION__);
return ANT_STATUS_FAILED;
}
// Send HCI packet
ANT_BOOL retryRx;
ANT_BOOL retryTx;
status = ANT_STATUS_FAILED;
int MAX_RETRIES_WRITE_FAIL = 10;
int MAX_RETRY_TIME_SECS = 10;
int commandWriteFailRetries = 0;
// Start New timed retry code:
time_t startTime = time(NULL);
time_t endTime = 0;
if((time_t)-1 != startTime)
{
endTime = startTime + MAX_RETRY_TIME_SECS;
}
else
{
ANT_ERROR("failed to get current time");
}
do // while (retryTx)
{
retryTx = ANT_FALSE;
if(ANT_STATUS_SUCCESS == write_data(pucMesg, ucLen))
{
do // while (retryRx)
{
retryRx = ANT_FALSE;
if(ANT_TRUE == wait_for_message(tx_socket))
{
ANT_DEBUG_D("New HCI data available, reading...");
status = get_command_complete_result(tx_socket);
switch (status)
{
case ANT_STATUS_NO_VALUE_AVAILABLE:
{
ANT_WARN("Did not get an expected response for write, trying again");
retryRx = ANT_TRUE;
break;
}
case ANT_STATUS_FAILED:
{
ANT_ERROR("Command Complete: ANT_STATUS_FAILED");
break;
}
case ANT_STATUS_COMMAND_WRITE_FAILED:
{
ANT_ERROR("Command Complete: ANT_STATUS_WRITE_FAILED");
if(++commandWriteFailRetries < MAX_RETRIES_WRITE_FAIL)
{
ANT_DEBUG_D("Retrying. Retry count = %d",
commandWriteFailRetries);
retryTx = ANT_TRUE;
}
else
{
ANT_ERROR("Aborting. Retry count = %d. Max retries = %d",
commandWriteFailRetries, MAX_RETRIES_WRITE_FAIL);
}
break;
}
case ANT_STATUS_TRANSPORT_UNSPECIFIED_ERROR:
{
ANT_DEBUG_D("Command Complete: ANT_STATUS_UNSPECIFIED_ERROR");
// Give the chip a break before we try to resend data.
nanosleep((struct timespec[]) {
{
0, 50000000
}
}, NULL);
time_t currentTime = time(NULL);
if((time_t)-1 != currentTime)
{
if(currentTime < endTime)
{
ANT_DEBUG_V("Retrying. Current time = %d. "
"End time = %d", (int)currentTime, (int)endTime);
retryTx = ANT_TRUE;
}
else
{
ANT_ERROR("Command Complete: ANT_STATUS_UNSPECIFIED_ERROR");
ANT_ERROR("Aborting. Current time = %d. End Time = %d",
(int)currentTime, (int)endTime);
}
}
else
{
ANT_ERROR("Command Complete: failed to get current time");
}
break;
}
case ANT_STATUS_SUCCESS:
{
break;
}
default:
{
ANT_ERROR("Unhandled command complete status");
break;
}
}
}
else
{
ANT_WARN("Command Complete: wait for message failed");
}
} while (retryRx);
ANTStatus ant_disable_radio(void)
{
int result;
int lockResult;
ANTStatus ret = ANT_STATUS_FAILED;
ANT_FUNC_START();
ANT_DEBUG_V("getting enableLock in %s", __FUNCTION__);
lockResult = pthread_mutex_lock(&enableLock);
if(lockResult)
{
ANT_ERROR("Disable failed to get enableLock mutex: %s", strerror(lockResult));
return ANT_STATUS_FAILED;
}
ANT_DEBUG_V("got enableLock in %s", __FUNCTION__);
ANT_DEBUG_V("getting txLock in %s", __FUNCTION__);
lockResult = pthread_mutex_lock(&txLock);
if (lockResult)
{
ANT_ERROR("Disable txLock failed: %s", strerror(lockResult));
pthread_mutex_unlock(&enableLock);
return ANT_STATUS_FAILED;
}
ANT_DEBUG_V("got txLock in %s", __FUNCTION__);
#if USE_EXTERNAL_POWER_LIBRARY
if (get_and_set_radio_status() != RADIO_STATUS_DISABLED)
{
ANT_DEBUG_I("radio_status (%d -> %d)", radio_status, RADIO_STATUS_DISABLING);
radio_status = RADIO_STATUS_DISABLING;
if (RxParams.pfStateCallback)
RxParams.pfStateCallback(radio_status);
}
result = ant_disable();
ANT_DEBUG_D("ant_disable() result is %d", result);
#else
radio_status = RADIO_STATUS_DISABLED;
#endif
// If rx thread exists ( != 0)
if (RxParams.thread)
{
ANT_DEBUG_V("quit rx thread, joining");
pthread_join(RxParams.thread, NULL);
RxParams.thread = 0;
ANT_DEBUG_V("joined by rx thread");
}
else
{
ANT_DEBUG_W("rx thread is 0 (not created?)");
}
switch (get_and_set_radio_status())
{
case RADIO_STATUS_DISABLED:
ret = ANT_STATUS_SUCCESS;
break;
case RADIO_STATUS_ENABLED:
ANT_ERROR("SERIOUS: ANT was disabled, rx thread quit, but ANT is enabled");
ret = ANT_STATUS_FAILED;
break;
default:
ret = ANT_STATUS_NOT_DE_INITIALIZED;
break;
}
ANT_DEBUG_V("releasing txLock in %s", __FUNCTION__);
pthread_mutex_unlock(&txLock);
ANT_DEBUG_V("released txLock in %s", __FUNCTION__);
ANT_DEBUG_V("releasing enableLock in %s", __FUNCTION__);
pthread_mutex_unlock(&enableLock);
ANT_DEBUG_V("released enableLock in %s", __FUNCTION__);
ANT_FUNC_END();
return ret;
}
ANTStatus ant_enable_radio(void)
{
int result;
int lockResult;
ANTStatus result_status = ANT_STATUS_FAILED;
ANT_FUNC_START();
ANT_DEBUG_V("getting enableLock in %s", __FUNCTION__);
lockResult = pthread_mutex_lock(&enableLock);
if(lockResult)
{
ANT_ERROR("Enable failed to get enableLock mutex: %s", strerror(lockResult));
return ANT_STATUS_FAILED;
}
ANT_DEBUG_V("got enableLock in %s", __FUNCTION__);
if(RADIO_STATUS_DISABLED == radio_status)
{
radio_status = RADIO_STATUS_ENABLING;
}
ANT_DEBUG_V("getting txLock in %s", __FUNCTION__);
lockResult = pthread_mutex_lock(&txLock);
if (lockResult)
{
ANT_ERROR("Enable txLock failed: %s", strerror(lockResult));
pthread_mutex_unlock(&enableLock);
return ANT_STATUS_FAILED;
}
ANT_DEBUG_V("got txLock in %s", __FUNCTION__);
if (get_and_set_radio_status() != RADIO_STATUS_ENABLED)
{
if (RxParams.thread)
{
ANT_WARN("in enable call: rx thread still exists but radio crashed. trying to recover");
ANT_DEBUG_V("radio crashed, letting rx thread join");
pthread_join(RxParams.thread, NULL);
RxParams.thread = 0;
ANT_DEBUG_V("recovered. joined by rx thread");
}
ANT_DEBUG_I("radio_status (%d -> %d)", radio_status, RADIO_STATUS_ENABLING);
radio_status = RADIO_STATUS_ENABLING;
#if USE_EXTERNAL_POWER_LIBRARY
if (RxParams.pfStateCallback)
RxParams.pfStateCallback(radio_status);
#endif
}
#if USE_EXTERNAL_POWER_LIBRARY
result = ant_enable();
ANT_DEBUG_D("ant_enable() result is %d", result);
#else
result = 0;
#endif
if (result == 0)
{
if (RxParams.thread)
{
result_status = ANT_STATUS_SUCCESS;
radio_status = RADIO_STATUS_ENABLED; // sanity assign, cant be enabling
ANT_DEBUG_D("ANT radio re-enabled");
}
else
{
result = pthread_create(&RxParams.thread, NULL, ANTHCIRxThread, NULL);
if (result)
{
ANT_ERROR("Thread initialization failed: %s", strerror(result));
result_status = ANT_STATUS_FAILED;
}
else
{
result_status = ANT_STATUS_SUCCESS;
#if USE_EXTERNAL_POWER_LIBRARY
if (radio_status == RADIO_STATUS_ENABLING)
{
ANT_DEBUG_I("radio_status (%d -> %d)", radio_status, RADIO_STATUS_ENABLED);
radio_status = RADIO_STATUS_ENABLED;
if (RxParams.pfStateCallback)
RxParams.pfStateCallback(radio_status);
}
else
{
ANT_WARN("radio was already enabled but rx thread was not running");
}
#else
radio_status = RADIO_STATUS_ENABLED;
#endif
}
}
}
else
{
result_status = ANT_STATUS_TRANSPORT_INIT_ERR;
}
if (result_status != ANT_STATUS_SUCCESS) // ant_enable() or rx thread creating failed
{
#if USE_EXTERNAL_POWER_LIBRARY
ant_disable();
#endif
switch (get_and_set_radio_status())
{
case RADIO_STATUS_ENABLED:
ANT_ERROR("SERIOUS: enable failed, but ANT is enabled without a rx thread");
break;
default:
ANT_DEBUG_D("Enable failed, after cleanup chip is not enabled");
break;
}
}
ANT_DEBUG_V("releasing txLock in %s", __FUNCTION__);
pthread_mutex_unlock(&txLock);
ANT_DEBUG_V("released txLock in %s", __FUNCTION__);
ANT_DEBUG_V("releasing enableLock in %s", __FUNCTION__);
pthread_mutex_unlock(&enableLock);
ANT_DEBUG_V("released enableLock in %s", __FUNCTION__);
ANT_FUNC_END();
return result_status;
}