void
acpi_EnterDebugger(void)
{
ACPI_PARSE_OBJECT obj;
static int initted = 0;
if (!initted) {
printf("Initialising ACPICA debugger...\n");
AcpiInitializeDebugger();
initted = 1;
}
printf("Entering ACPICA debugger...\n");
AcpiDbUserCommands('A', &obj);
}
void
main(int argc, char *argv[])
{
int set = -1, enable = -1;
int seg = 0, bus = 0, dev = 2, fn = 0, pin = 0;
ACPI_STATUS status;
int verbose = 0;
AcpiDbgLevel = 0;
ARGBEGIN{
case 'v':
AcpiDbgLevel = ACPI_LV_VERBOSITY1;
verbose++;
break;
case 's':
set = open("#P/irqmap", OWRITE);
if (set < 0)
sysfatal("%r");
break;
default:
sysfatal("usage: acpi/irq [-v] [-s]");
break;
}ARGEND;
status = AcpiInitializeSubsystem();
if (ACPI_FAILURE(status)) {
sysfatal("Error %d\n", status);
}
status = AcpiInitializeTables(NULL, 0, FALSE);
if (ACPI_FAILURE(status))
sysfatal("can't set up acpi tables: %d", status);
if (verbose)
print("init dables\n");
status = AcpiLoadTables();
if (ACPI_FAILURE(status))
sysfatal("Can't load ACPI tables: %d", status);
/* from acpi: */
/* If the Hardware Reduced flag is set, machine is always in acpi mode */
AcpiGbl_ReducedHardware = 1;
if (verbose)
print("LOADED TABLES.\n");
status = AcpiEnableSubsystem(0);
if (ACPI_FAILURE(status))
print("Probably does not matter: Can't enable ACPI subsystem");
if (verbose)
print("enabled subsystem.\n");
status = AcpiInitializeObjects(0);
if (ACPI_FAILURE(status))
sysfatal("Can't Initialize ACPI objects");
int picmode;
status = FindIOAPICs(&picmode);
if (picmode == 0)
sysfatal("PANIC: Can't handle picmode 0!");
ACPI_STATUS ExecuteOSI(int pic_mode);
if (verbose)
print("FindIOAPICs returns status %d picmode %d\n", status, picmode);
status = ExecuteOSI(picmode);
CHECK_STATUS("ExecuteOSI");
failed:
if (verbose)
print("inited objects.\n");
if (verbose)
AcpiDbgLevel |= ACPI_LV_VERBOSITY1 | ACPI_LV_FUNCTIONS;
status = AcpiInitializeDebugger();
if (ACPI_FAILURE(status)) {
sysfatal("Error %d\n", status);
}
int GetPRT();
status = GetPRT();
if (ACPI_FAILURE(status)) {
sysfatal("Error %d\n", status);
}
while (1) {
if (scanf("%x %x", &bus, &dev) < 0)
break;
ACPI_STATUS RouteIRQ(ACPI_PCI_ID* device, int pin, int* irq);
AcpiDbgLevel = 0;
ACPI_PCI_ID id = (ACPI_PCI_ID){seg, bus, dev, fn};
status = AcpiOsReadPciConfiguration (&id, 0x3d, &pin, 8);
if (!ACPI_SUCCESS(status)){
printf("Can't read pin for bus %d dev %d\n", bus, dev);
continue;
}
print("ROUTE {%d, %d, %d, %d}, pin %d\n", seg, bus, dev, fn, pin);
int irq;
status = RouteIRQ(&id, pin, &irq);
print("status %d, irq %d\n", status, irq);
AcpiDbgLevel = 0;
print("echo %d %d %d %d 0x%x > /dev/irqmap", seg, bus, dev, fn, irq);
//ACPI_STATUS PrintDevices(void);
//status = PrintDevices();
if (set > -1)
fprint(set, "%d %d %d %d 0x%x", seg, bus, dev, fn, irq);
}
/* we're done. Enable the IRQs we might have set up. */
enable = open("/dev/irqenable", OWRITE);
if (enable < 0)
sysfatal("/dev/irqenable: %r");
if (write(enable, "", 1) < 1)
sysfatal("Write irqenable: %r");
exits(0);
}
int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
ACPI_NEW_TABLE_DESC *ListHead = NULL;
ACPI_STATUS Status;
UINT32 InitFlags;
int ExitCode = 0;
ACPI_DEBUG_INITIALIZE (); /* For debug version only */
signal (SIGINT, AeCtrlCHandler);
/* Init debug globals */
AcpiDbgLevel = ACPI_NORMAL_DEFAULT;
AcpiDbgLayer = 0xFFFFFFFF;
/*
* Initialize ACPICA and start debugger thread.
*
* NOTE: After ACPICA initialization, AcpiTerminate MUST be called
* before this procedure exits -- otherwise, the console may be
* left in an incorrect state.
*/
Status = AcpiInitializeSubsystem ();
ACPI_CHECK_OK (AcpiInitializeSubsystem, Status);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
/* ACPICA runtime configuration */
AcpiGbl_MaxLoopIterations = 400;
/* Initialize the AML debugger */
Status = AcpiInitializeDebugger ();
ACPI_CHECK_OK (AcpiInitializeDebugger, Status);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
printf (ACPI_COMMON_SIGNON (ACPIEXEC_NAME));
if (argc < 2)
{
usage ();
goto NormalExit;
}
/* Get the command line options */
ExitCode = AeDoOptions (argc, argv);
if (ExitCode)
{
if (ExitCode > 0)
{
ExitCode = 0;
}
goto ErrorExit;
}
/* The remaining arguments are filenames for ACPI tables */
if (!argv[AcpiGbl_Optind])
{
goto EnterDebugger;
}
AcpiGbl_CstyleDisassembly = FALSE; /* Not supported for AcpiExec */
/* Get each of the ACPI table files on the command line */
while (argv[AcpiGbl_Optind])
{
/* Get all ACPI AML tables in this file */
Status = AcGetAllTablesFromFile (argv[AcpiGbl_Optind],
ACPI_GET_ALL_TABLES, &ListHead);
if (ACPI_FAILURE (Status))
{
ExitCode = -1;
goto ErrorExit;
}
AcpiGbl_Optind++;
}
printf ("\n");
/* Build a local RSDT with all tables and let ACPICA process the RSDT */
Status = AeBuildLocalTables (ListHead);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
/* Install all of the ACPI tables */
Status = AeInstallTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not install ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install most of the handlers (Regions, Notify, Table, etc.)
* Override the default region handlers, especially SystemMemory,
* which is simulated in this utility.
*/
Status = AeInstallEarlyHandlers ();
if (ACPI_FAILURE (Status))
{
goto EnterDebugger;
}
/* Setup initialization flags for ACPICA */
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE);
if (AcpiGbl_DbOpt_NoIniMethods)
{
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT);
}
/*
* Main initialization for ACPICA subsystem
* TBD: Need a way to call this after the ACPI table "LOAD" command?
*
* NOTE: This initialization does not match the _Lxx and _Exx methods
* to individual GPEs, as there are no real GPEs when the hardware
* is simulated - because there is no namespace until AeLoadTables is
* executed. This may have to change if AcpiExec is ever run natively
* on actual hardware (such as under UEFI).
*/
Status = AcpiEnableSubsystem (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
Status = AeLoadTables ();
/*
* Exit namespace initialization for the "load namespace only" option.
* No control methods will be executed. However, still enter the
* the debugger.
*/
if (AcpiGbl_AeLoadOnly)
{
goto EnterDebugger;
}
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install handlers for "device driver" space IDs (EC,SMBus, etc.)
* and fixed event handlers
*/
AeInstallLateHandlers ();
/* Finish the ACPICA initialization */
Status = AcpiInitializeObjects (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
AeMiscellaneousTests ();
EnterDebugger:
/* Exit if error above and we are in one of the batch modes */
if (ACPI_FAILURE (Status) && (AcpiGbl_ExecutionMode > 0))
{
goto ErrorExit;
}
/* Run a batch command or enter the command loop */
switch (AcpiGbl_ExecutionMode)
{
default:
case AE_MODE_COMMAND_LOOP:
AcpiRunDebugger (NULL);
break;
case AE_MODE_BATCH_MULTIPLE:
AcpiRunDebugger (BatchBuffer);
break;
case AE_MODE_BATCH_SINGLE:
AcpiDbExecute (BatchBuffer, NULL, NULL, EX_NO_SINGLE_STEP);
break;
}
/* Shut down the debugger and ACPICA */
AcpiTerminateDebugger ();
NormalExit:
ExitCode = 0;
ErrorExit:
(void) AcpiOsTerminate ();
return (ExitCode);
}
