/**************************************************************************************************
* @fn BSP_Init
*
* @brief Initialize the board and drivers.
*
* @param none
*
* @return none
**************************************************************************************************
*/
void BSP_Init(void)
{
BSP_INIT_BOARD();
BSP_INIT_DRIVERS();
/*-------------------------------------------------------------
* Run time integrity checks. Perform only if asserts
* are enabled.
*/
#ifdef BSP_ASSERTS_ARE_ON
/* verify endianess is correctly specified */
{
uint16_t test = 0x00AA; /* first storage byte of 'test' is non-zero for little endian */
BSP_ASSERT(!(*((uint8_t *)&test)) == !BSP_LITTLE_ENDIAN); /* endianess mismatch */
}
#endif
}
/**************************************************************************************************
* @fn BSP_Init
*
* @brief Initialize the board and drivers.
*
* @param none
*
* @return none
**************************************************************************************************
*/
void BSP_Init(void)
{
BSP_INIT_BOARD();
/************* MSP-EXP430F6137Rx Edit: HAL to control LEDs & BUTTONs*********/
// BSP_INIT_DRIVERS();
/****************SimpliciTI BSP to not control LEDS & BUTTONS****************/
/*-------------------------------------------------------------
* Run time integrity checks. Perform only if asserts
* are enabled.
*/
#ifdef BSP_ASSERTS_ARE_ON
/* verify endianess is correctly specified */
{
uint16_t test = 0x00AA; /* first storage byte of 'test' is non-zero for little endian */
BSP_ASSERT(!(*((uint8_t *)&test)) == !BSP_LITTLE_ENDIAN); /* endianess mismatch */
}
#endif
}
/******************************************************************************
* @fn mrfiLinkInit
*
* @brief Initialise the MRFI layer. Selects RF channel and addresses.
*
* @param src - source address (16 bit)
*
* @param dst - destination address (16 bit)
*
* @return void
*
*/
void mrfiLinkInit(uint16 src, uint16 dst, uint8 mrfiChannel)
{
#ifdef USB_SUSPEND_HOOKS
// Register USB hooks if necessary
pFnSuspendEnterHook= MRFI_Sleep;
pFnSuspendExitHook= linkRestore;
#endif
// Make sure the timer is initialised
BSP_INIT_BOARD();
// Initialise the addresses
src_addr[0]= LO_UINT16(MRFI_LINK_PAN_ID);
src_addr[1]= HI_UINT16(MRFI_LINK_PAN_ID);
src_addr[2]= LO_UINT16(src);
src_addr[3]= HI_UINT16(src);
dest_addr[0]= LO_UINT16(MRFI_LINK_PAN_ID);
dest_addr[1]= HI_UINT16(MRFI_LINK_PAN_ID);
dest_addr[2]= LO_UINT16(dst);
dest_addr[3]= HI_UINT16(dst);
// Initialise MRFI link housekeeping data
mrfiPktRdy= FALSE;
fAckRdy= FALSE;
seqSend= 0;
seqRecv= 0;
// Initialise MRFI
MRFI_Init();
MRFI_WakeUp();
MRFI_SetLogicalChannel(mrfiChannel);
MRFI_RxOn();
MRFI_SetRxAddrFilter(src_addr);
MRFI_EnableRxAddrFilter();
}