Exemplo n.º 1
0
Arquivo: Hob.c Projeto: B-Rich/edk2
VOID
CreateHobList (
  IN VOID   *MemoryBegin,
  IN UINTN  MemoryLength,
  IN VOID   *HobBase,
  IN VOID   *StackBase
  )
{
  EFI_HOB_HANDOFF_INFO_TABLE  *Hob;
  EFI_RESOURCE_ATTRIBUTE_TYPE Attributes;

  Hob = HobConstructor (MemoryBegin,MemoryLength,HobBase,StackBase);
  SetHobList (Hob);

  BuildCpuHob (PcdGet8 (PcdPrePiCpuMemorySize), PcdGet8 (PcdPrePiCpuIoSize));
  
  Attributes =(
    EFI_RESOURCE_ATTRIBUTE_PRESENT |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_TESTED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
  );

  BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY, Attributes, (UINTN)MemoryBegin, MemoryLength);

  BuildStackHob ((EFI_PHYSICAL_ADDRESS)(UINTN)StackBase, ((UINTN)MemoryBegin + MemoryLength) - (UINTN)StackBase);

  if (FeaturePcdGet (PcdPrePiProduceMemoryTypeInformationHob)) {
    // Optional feature that helps prevent EFI memory map fragmentation. 
    BuildMemoryTypeInformationHob ();
  }
}  
Exemplo n.º 2
0
/*++

Routine Description:

Arguments:

  FileHandle  - Handle of the file being invoked.
  PeiServices - Describes the list of possible PEI Services.

Returns:

  Status -  EFI_SUCCESS if the boot mode could be set

--*/
EFI_STATUS
EFIAPI
InitializeCpuPeim (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS              Status;
  ARM_MP_CORE_INFO_PPI    *ArmMpCoreInfoPpi;
  UINTN                   ArmCoreCount;
  ARM_CORE_INFO           *ArmCoreInfoTable;

  // Enable program flow prediction, if supported.
  ArmEnableBranchPrediction ();

  // Publish the CPU memory and io spaces sizes
  BuildCpuHob (PcdGet8 (PcdPrePiCpuMemorySize), PcdGet8 (PcdPrePiCpuIoSize));

  // Only MP Core platform need to produce gArmMpCoreInfoPpiGuid
  Status = PeiServicesLocatePpi (&gArmMpCoreInfoPpiGuid, 0, NULL, (VOID**)&ArmMpCoreInfoPpi);
  if (!EFI_ERROR(Status)) {
    // Build the MP Core Info Table
    ArmCoreCount = 0;
    Status = ArmMpCoreInfoPpi->GetMpCoreInfo (&ArmCoreCount, &ArmCoreInfoTable);
    if (!EFI_ERROR(Status) && (ArmCoreCount > 0)) {
      // Build MPCore Info HOB
      BuildGuidDataHob (&gArmMpCoreInfoGuid, ArmCoreInfoTable, sizeof (ARM_CORE_INFO) * ArmCoreCount);
    }
  }

  return EFI_SUCCESS;
}
Exemplo n.º 3
0
VOID
MiscInitialization (
  VOID
  )
{
  //
  // Disable A20 Mask
  //
  IoOr8 (0x92, BIT1);

  //
  // Build the CPU hob with 36-bit addressing and 16-bits of IO space.
  //
  BuildCpuHob (36, 16);

  //
  // If PMREGMISC/PMIOSE is set, assume the ACPI PMBA has been configured (for
  // example by Xen) and skip the setup here. This matches the logic in
  // AcpiTimerLibConstructor ().
  //
  if ((PciRead8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80)) & 0x01) == 0) {
    //
    // The PEI phase should be exited with fully accessibe PIIX4 IO space:
    // 1. set PMBA
    //
    PciAndThenOr32 (
      PCI_LIB_ADDRESS (0, 1, 3, 0x40),
      (UINT32) ~0xFFC0,
      PcdGet16 (PcdAcpiPmBaseAddress)
      );

    //
    // 2. set PCICMD/IOSE
    //
    PciOr8 (
      PCI_LIB_ADDRESS (0, 1, 3, PCI_COMMAND_OFFSET),
      EFI_PCI_COMMAND_IO_SPACE
      );

    //
    // 3. set PMREGMISC/PMIOSE
    //
    PciOr8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80), 0x01);
  }
}
Exemplo n.º 4
0
VOID
MiscInitialization ()
{
  //
  // Disable A20 Mask
  //
  IoOr8 (0x92, BIT1);

  //
  // Build the CPU hob with 36-bit addressing and 16-bits of IO space.
  //
  BuildCpuHob (36, 16);

  //
  // Set the PM I/O base address to 0x400
  //
  PciAndThenOr32 (PCI_LIB_ADDRESS (0, 1, 3, 0x40), (UINT32) ~0xfc0, 0x400);
}
Exemplo n.º 5
0
/**
  This is the entrypoint of PEIM

  @param  FileHandle  Handle of the file being invoked.
  @param  PeiServices Describes the list of possible PEI Services.

  @retval EFI_SUCCESS if it completed successfully.
**/
EFI_STATUS
EFIAPI
CbPeiEntryPoint (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS           Status;
  UINT64               LowMemorySize;
  UINT64               PeiMemSize = SIZE_64MB;   // 64 MB
  EFI_PHYSICAL_ADDRESS PeiMemBase = 0;
  UINT32               RegEax;
  UINT8                PhysicalAddressBits;
  VOID*                pCbHeader;
  VOID*                pAcpiTable;
  UINT32               AcpiTableSize;
  VOID*                pSmbiosTable;
  UINT32               SmbiosTableSize;
  SYSTEM_TABLE_INFO*   pSystemTableInfo;
  FRAME_BUFFER_INFO    FbInfo;
  FRAME_BUFFER_INFO*   pFbInfo;
  ACPI_BOARD_INFO*     pAcpiBoardInfo;
  UINTN                PmCtrlRegBase, PmTimerRegBase, ResetRegAddress, ResetValue;
  UINTN                PmEvtBase;
  UINTN                PmGpeEnBase;
  CB_MEM_INFO          CbMemInfo;

  //
  // Report lower 640KB of RAM. Attribute EFI_RESOURCE_ATTRIBUTE_TESTED  
  // is intentionally omitted to prevent erasing of the coreboot header  
  // record before it is processed by CbParseMemoryInfo.
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_SYSTEM_MEMORY,
    (
    EFI_RESOURCE_ATTRIBUTE_PRESENT |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    // Lower 640KB, except for first 4KB where the lower coreboot pointer ("LBIO") resides
    (EFI_PHYSICAL_ADDRESS)(0 + 0x1000),
    (UINT64)(0xA0000 - 0x1000)
    );


  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_RESERVED,
    (
    EFI_RESOURCE_ATTRIBUTE_PRESENT |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_TESTED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    (EFI_PHYSICAL_ADDRESS)(0xA0000),
    (UINT64)(0x60000)
    );

  ZeroMem (&CbMemInfo, sizeof(CbMemInfo));
  Status = CbParseMemoryInfo (CbMemInfoCallback, (VOID *)&CbMemInfo);
  if (EFI_ERROR(Status)) {
    return Status;
  }

  LowMemorySize = CbMemInfo.UsableLowMemTop;
  DEBUG ((EFI_D_INFO, "Low memory 0x%lx\n", LowMemorySize));
  DEBUG ((EFI_D_INFO, "SystemLowMemTop 0x%x\n", CbMemInfo.SystemLowMemTop));

  //
  // Should be 64k aligned
  //
  PeiMemBase = (LowMemorySize - PeiMemSize) & (~(BASE_64KB - 1));

  DEBUG((EFI_D_ERROR, "PeiMemBase: 0x%lx.\n", PeiMemBase));
  DEBUG((EFI_D_ERROR, "PeiMemSize: 0x%lx.\n", PeiMemSize));

  Status = PeiServicesInstallPeiMemory (
         PeiMemBase,
         PeiMemSize
         );
  ASSERT_EFI_ERROR (Status);

  //
  // Set cache on the physical memory
  //
  MtrrSetMemoryAttribute (BASE_1MB, LowMemorySize - BASE_1MB, CacheWriteBack);
  MtrrSetMemoryAttribute (0, 0xA0000, CacheWriteBack);

  //
  // Create Memory Type Information HOB
  //
  BuildGuidDataHob (
    &gEfiMemoryTypeInformationGuid,
    mDefaultMemoryTypeInformation,
    sizeof(mDefaultMemoryTypeInformation)
    );

  //
  // Create Fv hob
  //
  CbPeiReportRemainedFvs ();

  BuildMemoryAllocationHob (
    PcdGet32 (PcdPayloadFdMemBase),
    PcdGet32 (PcdPayloadFdMemSize),
    EfiBootServicesData
    );

  //
  // Build CPU memory space and IO space hob
  //
  AsmCpuid (0x80000000, &RegEax, NULL, NULL, NULL);
  if (RegEax >= 0x80000008) {
    AsmCpuid (0x80000008, &RegEax, NULL, NULL, NULL);
    PhysicalAddressBits = (UINT8) RegEax;
  } else {
    PhysicalAddressBits  = 36;
  }
  //
  // Create a CPU hand-off information
  //
  BuildCpuHob (PhysicalAddressBits, 16);

  //
  // Report Local APIC range
  //
  BuildMemoryMappedIoRangeHob (0xFEC80000, SIZE_512KB);

  //
  // Boot mode
  //
  Status = PeiServicesSetBootMode (BOOT_WITH_FULL_CONFIGURATION);
  ASSERT_EFI_ERROR (Status);

  Status = PeiServicesInstallPpi (mPpiBootMode);
  ASSERT_EFI_ERROR (Status);

   //
  // Set pcd to save the upper coreboot header in case the dxecore will
  // erase 0~4k memory
  //
  pCbHeader = NULL;
  if ((CbParseGetCbHeader (1, &pCbHeader) == RETURN_SUCCESS)
    && ((UINTN)pCbHeader > BASE_4KB)) {
    DEBUG((EFI_D_ERROR, "Actual Coreboot header: %p.\n", pCbHeader));
    Status = PcdSet32S (PcdCbHeaderPointer, (UINT32)(UINTN)pCbHeader);
    ASSERT_EFI_ERROR (Status);
  }

  //
  // Create guid hob for system tables like acpi table and smbios table
  //
  pAcpiTable = NULL;
  AcpiTableSize = 0;
  pSmbiosTable = NULL;
  SmbiosTableSize = 0;
  Status = CbParseAcpiTable (&pAcpiTable, &AcpiTableSize);
  if (EFI_ERROR (Status)) {
    // ACPI table is oblidgible
    DEBUG ((EFI_D_ERROR, "Failed to find the required acpi table\n"));
    ASSERT (FALSE);
  }
  CbParseSmbiosTable (&pSmbiosTable, &SmbiosTableSize);

  pSystemTableInfo = NULL;
  pSystemTableInfo = BuildGuidHob (&gUefiSystemTableInfoGuid, sizeof (SYSTEM_TABLE_INFO));
  ASSERT (pSystemTableInfo != NULL);
  pSystemTableInfo->AcpiTableBase = (UINT64) (UINTN)pAcpiTable;
  pSystemTableInfo->AcpiTableSize = AcpiTableSize;
  pSystemTableInfo->SmbiosTableBase = (UINT64) (UINTN)pSmbiosTable;
  pSystemTableInfo->SmbiosTableSize = SmbiosTableSize;
  DEBUG ((EFI_D_ERROR, "Detected Acpi Table at 0x%lx, length 0x%x\n", pSystemTableInfo->AcpiTableBase, pSystemTableInfo->AcpiTableSize));
  DEBUG ((EFI_D_ERROR, "Detected Smbios Table at 0x%lx, length 0x%x\n", pSystemTableInfo->SmbiosTableBase, pSystemTableInfo->SmbiosTableSize));
  DEBUG ((EFI_D_ERROR, "Create system table info guid hob\n"));

  //
  // Create guid hob for acpi board information
  //
  Status = CbParseFadtInfo (&PmCtrlRegBase, &PmTimerRegBase, &ResetRegAddress, &ResetValue, &PmEvtBase, &PmGpeEnBase);
  ASSERT_EFI_ERROR (Status);
  pAcpiBoardInfo = NULL;
  pAcpiBoardInfo = BuildGuidHob (&gUefiAcpiBoardInfoGuid, sizeof (ACPI_BOARD_INFO));
  ASSERT (pAcpiBoardInfo != NULL);
  pAcpiBoardInfo->PmCtrlRegBase = (UINT64)PmCtrlRegBase;
  pAcpiBoardInfo->PmTimerRegBase = (UINT64)PmTimerRegBase;
  pAcpiBoardInfo->ResetRegAddress = (UINT64)ResetRegAddress;
  pAcpiBoardInfo->ResetValue = (UINT8)ResetValue;
  pAcpiBoardInfo->PmEvtBase = (UINT64)PmEvtBase;
  pAcpiBoardInfo->PmGpeEnBase = (UINT64)PmGpeEnBase;
  DEBUG ((EFI_D_ERROR, "Create acpi board info guid hob\n"));

  //
  // Create guid hob for frame buffer information
  //
  ZeroMem (&FbInfo, sizeof (FRAME_BUFFER_INFO));
  Status = CbParseFbInfo (&FbInfo);
  if (!EFI_ERROR (Status)) {
    pFbInfo = BuildGuidHob (&gUefiFrameBufferInfoGuid, sizeof (FRAME_BUFFER_INFO));
    ASSERT (pSystemTableInfo != NULL);
    CopyMem (pFbInfo, &FbInfo, sizeof (FRAME_BUFFER_INFO));
    DEBUG ((EFI_D_ERROR, "Create frame buffer info guid hob\n"));
  }

  //
  // Parse platform specific information from coreboot. 
  //
  Status = CbParsePlatformInfo ();
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "Error when parsing platform info, Status = %r\n", Status));
    return Status;
  }

  return EFI_SUCCESS;
}
Exemplo n.º 6
0
EFI_STATUS
EFIAPI
PeimInitializeWinNtAutoScan (
  IN       EFI_PEI_FILE_HANDLE       FileHandle,
  IN CONST EFI_PEI_SERVICES          **PeiServices
  )
/*++

Routine Description:
  Perform a call-back into the SEC simulator to get a memory value

Arguments:
  FfsHeader   - General purpose data available to every PEIM
  PeiServices - General purpose services available to every PEIM.
    
Returns:
  None

--*/
{
  EFI_STATUS                            Status;
  EFI_PEI_PPI_DESCRIPTOR                *PpiDescriptor;
  PEI_NT_AUTOSCAN_PPI                   *PeiNtService;
  UINT64                                MemorySize;
  EFI_PHYSICAL_ADDRESS                  MemoryBase;
  UINTN                                 Index;
  EFI_RESOURCE_ATTRIBUTE_TYPE           Attributes;
  UINT64                                PeiMemorySize;
  EFI_PHYSICAL_ADDRESS                  PeiMemoryBase;
  EFI_PEI_READ_ONLY_VARIABLE2_PPI       *Variable;
  UINTN                                 DataSize;
  EFI_MEMORY_TYPE_INFORMATION           MemoryData [EfiMaxMemoryType + 1];
  UINT64                                SmramMemorySize;
  EFI_PHYSICAL_ADDRESS                  SmramMemoryBase;
  EFI_SMRAM_HOB_DESCRIPTOR_BLOCK        *SmramHobDescriptorBlock;
  PEI_CAPSULE_PPI                       *Capsule;
  VOID                                  *CapsuleBuffer;
  UINTN                                 CapsuleBufferLength;
  EFI_BOOT_MODE                         BootMode;
  EFI_WIN_NT_MEMORY_LAYOUT              *MemoryLayout;
  UINTN                                 MaxSystemMemoryCount;

  DEBUG ((EFI_D_ERROR, "NT 32 Autoscan PEIM Loaded\n"));

  //
  // Get the PEI NT Autoscan PPI
  //
  Status = PeiServicesLocatePpi (
             &gPeiNtAutoScanPpiGuid, // GUID
             0,                      // INSTANCE
             &PpiDescriptor,         // EFI_PEI_PPI_DESCRIPTOR
             (VOID**)&PeiNtService           // PPI
             );
  ASSERT_EFI_ERROR (Status);

  Status = PeiServicesGetBootMode (&BootMode);
  ASSERT_EFI_ERROR (Status);

  DEBUG ((EFI_D_ERROR, "BootMode - %x\n", BootMode));

  if (FeaturePcdGet (PcdWinNtCapsuleEnable)) {
    MaxSystemMemoryCount = GetMaxSystemMemoryCount();
    MemoryLayout = BuildGuidHob (
                     &gEfiWinNtMemoryLayoutGuid,
                     sizeof (EFI_WIN_NT_MEMORY_LAYOUT) + sizeof (EFI_WIN_NT_MEMORY_DESCRIPTOR) * (MaxSystemMemoryCount - 1)
                     );
    ASSERT (MemoryLayout != NULL);
    MemoryLayout->NumberOfRegions = 0;
  
    Capsule = NULL;
    CapsuleBuffer = NULL;
    CapsuleBufferLength = 0;
    if (BootMode == BOOT_ON_FLASH_UPDATE) {
      Status = PeiServicesLocatePpi (&gPeiCapsulePpiGuid, 0, NULL, (VOID**) &Capsule);
      ASSERT_EFI_ERROR (Status);
    }
  }

  Index = 0;
  SmramMemorySize = 0;
  SmramMemoryBase = 0;
  do {
    Status = PeiNtService->NtAutoScan (Index, &MemoryBase, &MemorySize);
    DEBUG ((EFI_D_ERROR, "NtAutoScan(%d) Status - %r\n", Index, Status));
    if (!EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "NtAutoScan(%d) Base - 0x%lx\n", Index, MemoryBase));
      DEBUG ((EFI_D_ERROR, "NtAutoScan(%d) Size - 0x%lx\n", Index, MemorySize));

      if (FeaturePcdGet (PcdWinNtCapsuleEnable)) {
        if (MemoryLayout->NumberOfRegions < MaxSystemMemoryCount) {
          MemoryLayout->Descriptor[MemoryLayout->NumberOfRegions].Base = MemoryBase;
          MemoryLayout->Descriptor[MemoryLayout->NumberOfRegions].Size = MemorySize;
          MemoryLayout->NumberOfRegions ++;
        }
      }

      Attributes =
        (
          EFI_RESOURCE_ATTRIBUTE_PRESENT |
          EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
          EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
        );

      if (Index == 0) {
        //
        // Register the memory with the PEI Core
        //

        if (FeaturePcdGet(PcdWinNtSmmEnable)) {
          //
          // SMRAM
          //
          SmramMemorySize = PcdGet64(PcdWinNtSmramSize);
          SmramMemoryBase = MemoryBase + MemorySize - SmramMemorySize;
          DEBUG ((EFI_D_ERROR, "SmramMemoryBase - 0x%lx\n", SmramMemoryBase));
          DEBUG ((EFI_D_ERROR, "SmramMemorySize - 0x%lx\n", SmramMemorySize));

          MemorySize      = MemorySize - SmramMemorySize;
        }

        PeiMemoryBase = MemoryBase;
        PeiMemorySize = MemorySize;

        if (FeaturePcdGet(PcdWinNtCapsuleEnable)) {
          //
          // Capsule
          //
          if (Capsule != NULL) {
            CapsuleBufferLength = ((UINTN) PeiMemorySize / 2);
            PeiMemorySize       = CapsuleBufferLength;
            CapsuleBuffer = (VOID*) (UINTN) (PeiMemoryBase + CapsuleBufferLength);
          }
        }

        Attributes |= EFI_RESOURCE_ATTRIBUTE_TESTED;
      }
      
      BuildResourceDescriptorHob (
        EFI_RESOURCE_SYSTEM_MEMORY,
        Attributes,
        MemoryBase,
        MemorySize
        );
      DEBUG ((EFI_D_ERROR, "ResourceHob - 0x%lx - 0x%lx\n", MemoryBase, MemorySize));
    }
    Index++;
  } while (!EFI_ERROR (Status));

  if (FeaturePcdGet(PcdWinNtCapsuleEnable)) {
    if (Capsule != NULL) {
      //
      // Call the Capsule PPI Coalesce function to coalesce the capsule data.
      //
      Status = Capsule->Coalesce (
                          (EFI_PEI_SERVICES**) PeiServices,
                          &CapsuleBuffer,
                          &CapsuleBufferLength
                          );
      DEBUG ((EFI_D_ERROR, "CoalesceStatus - %r\n", Status));
      DEBUG ((EFI_D_ERROR, "CapsuleBuffer - %x\n", CapsuleBuffer));
      DEBUG ((EFI_D_ERROR, "CapsuleBufferLength - %x\n", CapsuleBufferLength));
      
      //
      // If it failed, then NULL out our capsule PPI pointer so that the capsule
      // HOB does not get created below.
      //
      if (Status != EFI_SUCCESS) {
        Capsule = NULL;
      }
    }
  }

  Status = PeiServicesInstallPeiMemory (PeiMemoryBase, PeiMemorySize);
  ASSERT_EFI_ERROR (Status);

  if (FeaturePcdGet(PcdWinNtCapsuleEnable)) {
    //
    // If we found the capsule PPI (and we didn't have errors), then
    // call the capsule PEIM to allocate memory for the capsule.
    //
    if (Capsule != NULL) {
      Status = Capsule->CreateState((EFI_PEI_SERVICES **)PeiServices, CapsuleBuffer, CapsuleBufferLength);
    }
  }

  //
  // Build the CPU hob with 52-bit addressing and 16-bits of IO space.
  //
  BuildCpuHob (52, 16);

  //
  // Build GUIDed Hob that contains the Memory Type Information array
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiReadOnlyVariable2PpiGuid,
             0,
             NULL,
             (VOID **)&Variable
             );
  ASSERT_EFI_ERROR (Status);

  DataSize = sizeof (MemoryData);
  Status = Variable->GetVariable (
                       Variable,
                       EFI_MEMORY_TYPE_INFORMATION_VARIABLE_NAME,
                       &gEfiMemoryTypeInformationGuid,
                       NULL,
                       &DataSize,
                       &MemoryData
                       );
  if (EFI_ERROR (Status) || !ValidateMemoryTypeInfoVariable(MemoryData, DataSize)) {
    //
    // Create Memory Type Information HOB
    //
    BuildGuidDataHob (
      &gEfiMemoryTypeInformationGuid,
      mDefaultMemoryTypeInformation,
      sizeof(mDefaultMemoryTypeInformation)
      );
  } else {
    //
    // Create Memory Type Information HOB
    //
    BuildGuidDataHob (
      &gEfiMemoryTypeInformationGuid,
      MemoryData,
      DataSize
      );
  }

  if (FeaturePcdGet(PcdWinNtSmmEnable)) {
    //
    // BuildSmramHob
    //
    if ((SmramMemoryBase != 0) && (SmramMemorySize != 0)) {
      SmramHobDescriptorBlock = BuildGuidHob (
                                  &gEfiSmmPeiSmramMemoryReserveGuid,
                                  sizeof (EFI_SMRAM_HOB_DESCRIPTOR_BLOCK) + sizeof (EFI_SMRAM_DESCRIPTOR)
                                  );
      ASSERT (SmramHobDescriptorBlock != NULL);
      SmramHobDescriptorBlock->NumberOfSmmReservedRegions = 1;

      SmramHobDescriptorBlock->Descriptor[0].PhysicalStart = SmramMemoryBase;
      SmramHobDescriptorBlock->Descriptor[0].CpuStart      = SmramMemoryBase;
      SmramHobDescriptorBlock->Descriptor[0].PhysicalSize  = SmramMemorySize;
      SmramHobDescriptorBlock->Descriptor[0].RegionState   = EFI_SMRAM_CLOSED;
    }
  }

  return Status;
}
Exemplo n.º 7
0
/**
  This function will be called when MRC is done.

  @param  PeiServices General purpose services available to every PEIM.

  @param  NotifyDescriptor Information about the notify event..

  @param  Ppi The notify context.

  @retval EFI_SUCCESS If the function completed successfully.
**/
EFI_STATUS
EFIAPI
MemoryDiscoveredPpiNotifyCallback (
  IN EFI_PEI_SERVICES           **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  EFI_STATUS                            Status;
  EFI_BOOT_MODE                         BootMode;
  UINT64                                MemoryLength;
  UINT64                                MemoryLengthUc;
  UINT64                                MaxMemoryLength;
  UINT64                                MemOverflow;
  EFI_SMRAM_DESCRIPTOR                  *SmramDescriptor;
  UINTN                                 NumSmramRegions;
  UINT64                                EnlargedMemoryLength;
  UINT32                                RmuMainBaseAddress;
  UINTN                                 Index;
  MTRR_SETTINGS                         MtrrSetting;
  UINT32                                RegData32;
  EFI_PHYSICAL_ADDRESS                  NewBuffer;
  UINT8                                 CpuAddressWidth;
  EFI_CPUID_REGISTER                    FeatureInfo;
  
  DEBUG ((EFI_D_INFO, "Platform PEIM Memory Callback\n"));

  NumSmramRegions = 0;
  SmramDescriptor = NULL;
  RmuMainBaseAddress = 0;

  PERF_START (NULL, "SetCache", NULL, 0);

  InfoPostInstallMemory (&RmuMainBaseAddress, &SmramDescriptor, &NumSmramRegions);
  ASSERT (SmramDescriptor != NULL);
  ASSERT (RmuMainBaseAddress != 0);

  MemoryLength = ((UINT64) RmuMainBaseAddress) + 0x10000;
  EnlargedMemoryLength = MemoryLength;

  if (NumSmramRegions > 0) {
	  //
	  // Find the TSEG
	  //
	  for (Index = 0; Index < NumSmramRegions; Index ++) {
	    if ((SmramDescriptor[Index].PhysicalStart) == EnlargedMemoryLength) {
	      if (SmramDescriptor[Index].RegionState & EFI_CACHEABLE) {
	        //
	        // Enlarge memory length to include TSEG size
	        //
	        EnlargedMemoryLength += (SmramDescriptor[Index].PhysicalSize);
	      }
	    }
	  }
	}

  //
  // Check if a UC region is present
  //
  MaxMemoryLength = EnlargedMemoryLength;
  // Round up to nearest 256MB
  MemOverflow = (MemoryLength & 0x0fffffff);
  if (MemOverflow != 0) {
    MaxMemoryLength = MemoryLength + (0x10000000 - MemOverflow);
  }


  Status = PeiServicesGetBootMode (&BootMode);
  ASSERT_EFI_ERROR (Status);

  ZeroMem (&MtrrSetting, sizeof(MTRR_SETTINGS));
  (**PeiServices).CopyMem ((VOID *)&MtrrSetting.Fixed,(VOID *)&mFixedMtrrTable, sizeof(MTRR_FIXED_SETTINGS) );
  //
  // Cache the flash area to improve the boot performance in PEI phase
  //
  MtrrSetting.Variables.Mtrr[0].Base = (QUARK_BOOTROM_BASE_ADDRESS | CacheWriteBack);  
  MtrrSetting.Variables.Mtrr[0].Mask = (((~(QUARK_BOOTROM_SIZE_BYTES - 1)) & MTRR_LIB_CACHE_VALID_ADDRESS) | MTRR_LIB_CACHE_MTRR_ENABLED);
  
  MtrrSetting.Variables.Mtrr[1].Base = CacheWriteBack;  
  MtrrSetting.Variables.Mtrr[1].Mask = ((~(MaxMemoryLength - 1)) & MTRR_LIB_CACHE_VALID_ADDRESS) | MTRR_LIB_CACHE_MTRR_ENABLED;

  Index = 2;
  while (MaxMemoryLength != MemoryLength) {
    MemoryLengthUc = GetPowerOfTwo64 (MaxMemoryLength - MemoryLength);

    //Status = MtrrSetMemoryAttribute (MaxMemoryLength - MemoryLengthUc, MemoryLengthUc, CacheUncacheable);
    //ASSERT_EFI_ERROR (Status);
    
    MtrrSetting.Variables.Mtrr[Index].Base = ((MaxMemoryLength - MemoryLengthUc) & MTRR_LIB_CACHE_VALID_ADDRESS) | CacheUncacheable;
    MtrrSetting.Variables.Mtrr[Index].Mask= ((~(MemoryLengthUc   - 1)) & MTRR_LIB_CACHE_VALID_ADDRESS) | MTRR_LIB_CACHE_MTRR_ENABLED;      
    MaxMemoryLength -= MemoryLengthUc;
    Index++;
  }

  AsmInvd ();
 
  MtrrSetting.MtrrDefType = MTRR_LIB_CACHE_MTRR_ENABLED | MTRR_LIB_CACHE_FIXED_MTRR_ENABLED;
  MtrrSetAllMtrrs(&MtrrSetting);

  PERF_END (NULL, "SetCache", NULL, 0);

  //
  // Install PeiReset for PeiResetSystem service
  //
  Status = PeiServicesInstallPpi (&mPpiList[0]);
  ASSERT_EFI_ERROR (Status);

  //
  // Do QNC initialization after MRC
  //
  PeiQNCPostMemInit ();

  Status = PeiServicesInstallPpi (&mPpiStall[0]);
  ASSERT_EFI_ERROR (Status);

  //
  // Set E000/F000 Routing
  //
  RegData32 = QNCPortRead (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC);
  RegData32 |= (BIT2|BIT1);
  QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, RegData32);

  if (BootMode == BOOT_IN_RECOVERY_MODE) {
  PeiServicesInstallFvInfoPpi (
    NULL,
    (VOID *) (UINTN) PcdGet32 (PcdFlashFvRecovery2Base),
    PcdGet32 (PcdFlashFvRecovery2Size),
    NULL,
    NULL
    );
    Status = PeimInitializeRecovery (PeiServices);
    ASSERT_EFI_ERROR (Status);

  } else if (BootMode == BOOT_ON_S3_RESUME) {
    return EFI_SUCCESS;

  } else {
    //
    // Allocate the memory so that it gets preserved into DXE
    //
    Status = PeiServicesAllocatePages (
              EfiBootServicesData,
              EFI_SIZE_TO_PAGES (PcdGet32 (PcdFvSecurityHeaderSize) + PcdGet32 (PcdFlashFvMainSize)),
              &NewBuffer
              );

    //
    // Copy the compressed main Firmware Volume to memory for faster processing later
    //
    CopyMem ((VOID *) (UINTN) NewBuffer, (VOID *) (UINTN) (PcdGet32 (PcdFlashFvMainBase) - PcdGet32 (PcdFvSecurityHeaderSize)), (PcdGet32 (PcdFvSecurityHeaderSize) +PcdGet32 (PcdFlashFvMainSize)));

    PeiServicesInstallFvInfoPpi (
      NULL,
      (VOID *) (UINTN) (NewBuffer + PcdGet32 (PcdFvSecurityHeaderSize)),
      PcdGet32 (PcdFlashFvMainSize),
      NULL,
      NULL
      );
  }

  //
  // Build flash HOB, it's going to be used by GCD and E820 building
  // Map full SPI flash decode range (regardless of smaller SPI flash parts installed)
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_FIRMWARE_DEVICE,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT    |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    (SIZE_4GB - SIZE_8MB),
    SIZE_8MB
    );

  //
  // Create a CPU hand-off information
  //
  CpuAddressWidth = 32;
  AsmCpuid (EFI_CPUID_EXTENDED_FUNCTION, &FeatureInfo.RegEax, NULL, NULL, NULL);
  if (FeatureInfo.RegEax >= EFI_CPUID_VIR_PHY_ADDRESS_SIZE) {
    AsmCpuid (EFI_CPUID_VIR_PHY_ADDRESS_SIZE, &FeatureInfo.RegEax, NULL, NULL, NULL);
    CpuAddressWidth = (UINT8) (FeatureInfo.RegEax & 0xFF);
  }
  DEBUG ((EFI_D_INFO, "CpuAddressWidth: %d\n", CpuAddressWidth));

  BuildCpuHob (CpuAddressWidth, 16);

  ASSERT_EFI_ERROR (Status);

  return Status;
}
Exemplo n.º 8
0
EFI_STATUS
EFIAPI
PeimInitializeUnixAutoScan (
  IN       EFI_PEI_FILE_HANDLE       FileHandle,
  IN CONST EFI_PEI_SERVICES          **PeiServices
  )
/*++

Routine Description:
  Perform a call-back into the SEC simulator to get a memory value

Arguments:
  FfsHeader   - General purpose data available to every PEIM
  PeiServices - General purpose services available to every PEIM.
    
Returns:
  None

--*/
{
  EFI_STATUS                  Status;
  EFI_PEI_PPI_DESCRIPTOR      *PpiDescriptor;
  PEI_UNIX_AUTOSCAN_PPI      *PeiUnixService;
  UINT64                      MemorySize;
  EFI_PHYSICAL_ADDRESS        MemoryBase;
  UINTN                       Index;
  EFI_RESOURCE_ATTRIBUTE_TYPE Attributes;


  DEBUG ((EFI_D_ERROR, "Unix Autoscan PEIM Loaded\n"));

  //
  // Get the PEI UNIX Autoscan PPI
  //
  Status = PeiServicesLocatePpi (
             &gPeiUnixAutoScanPpiGuid, // GUID
             0,                      // INSTANCE
             &PpiDescriptor,         // EFI_PEI_PPI_DESCRIPTOR
             (VOID **)&PeiUnixService           // PPI
             );
  ASSERT_EFI_ERROR (Status);

  Index = 0;
  do {
    Status = PeiUnixService->UnixAutoScan (Index, &MemoryBase, &MemorySize);
    if (!EFI_ERROR (Status)) {
      Attributes =
        (
          EFI_RESOURCE_ATTRIBUTE_PRESENT |
          EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
          EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
          EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
        );

      if (Index == 0) {
        //
        // Register the memory with the PEI Core
        //
        Status = PeiServicesInstallPeiMemory (MemoryBase, MemorySize);
        ASSERT_EFI_ERROR (Status);

        Attributes |= EFI_RESOURCE_ATTRIBUTE_TESTED;
      }
      
      BuildResourceDescriptorHob (
        EFI_RESOURCE_SYSTEM_MEMORY,
        Attributes,
        MemoryBase,
        MemorySize
        );
    }
    Index++;
  } while (!EFI_ERROR (Status));

  //
  // Build the CPU hob with 36-bit addressing and 16-bits of IO space.
  //
  BuildCpuHob (36, 16);
  
  return Status;
}
Exemplo n.º 9
0
/**
  This function will be called when MRC is done.

  @param  PeiServices General purpose services available to every PEIM.

  @param  NotifyDescriptor Information about the notify event..

  @param  Ppi The notify context.

  @retval EFI_SUCCESS If the function completed successfully.
**/
EFI_STATUS
EFIAPI
MemoryDiscoveredPpiNotifyCallback (
  IN EFI_PEI_SERVICES           **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  EFI_STATUS                            Status;
  EFI_BOOT_MODE                         BootMode;
  UINT64                                MemoryLength;
  EFI_SMRAM_DESCRIPTOR                  *SmramDescriptor;
  UINTN                                 NumSmramRegions;
  UINT32                                RmuMainBaseAddress;
  UINT32                                RegData32;
  UINT8                                 CpuAddressWidth;
  UINT32                                RegEax;
  MTRR_SETTINGS                         MtrrSettings;
  EFI_PEI_READ_ONLY_VARIABLE2_PPI       *VariableServices;
  UINT8                                 MorControl;
  UINTN                                 DataSize;

  DEBUG ((EFI_D_INFO, "Platform PEIM Memory Callback\n"));

  NumSmramRegions = 0;
  SmramDescriptor = NULL;
  RmuMainBaseAddress = 0;

  PERF_START (NULL, "SetCache", NULL, 0);

  InfoPostInstallMemory (&RmuMainBaseAddress, &SmramDescriptor, &NumSmramRegions);
  ASSERT (SmramDescriptor != NULL);
  ASSERT (RmuMainBaseAddress != 0);

  MemoryLength = ((UINT64) RmuMainBaseAddress) + 0x10000;

  Status = PeiServicesGetBootMode (&BootMode);
  ASSERT_EFI_ERROR (Status);

  //
  // Get current MTRR settings
  //
  MtrrGetAllMtrrs (&MtrrSettings);

  //
  // Set all DRAM cachability to CacheWriteBack
  //
  Status = MtrrSetMemoryAttributeInMtrrSettings (&MtrrSettings, 0, MemoryLength, CacheWriteBack);
  ASSERT_EFI_ERROR (Status);

  //
  // RTC:28208 - System hang/crash when entering probe mode(ITP) when relocating SMBASE
  //             Workaround to make default SMRAM UnCachable
  //
  Status = MtrrSetMemoryAttributeInMtrrSettings (&MtrrSettings, 0x30000, SIZE_64KB, CacheUncacheable);
  ASSERT_EFI_ERROR (Status);

  //
  // Set new MTRR settings
  //
  MtrrSetAllMtrrs (&MtrrSettings);

  PERF_END (NULL, "SetCache", NULL, 0);

  //
  // Get necessary PPI
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiReadOnlyVariable2PpiGuid,           // GUID
             0,                                          // INSTANCE
             NULL,                                       // EFI_PEI_PPI_DESCRIPTOR
             (VOID **)&VariableServices                  // PPI
             );
  ASSERT_EFI_ERROR (Status);

  //
  // Detect MOR request by the OS.
  //
  MorControl = 0;
  DataSize = sizeof (MorControl);
  Status = VariableServices->GetVariable (
                               VariableServices,
                               MEMORY_OVERWRITE_REQUEST_VARIABLE_NAME,
                               &gEfiMemoryOverwriteControlDataGuid,
                               NULL,
                               &DataSize,
                               &MorControl
                               );
  //
  // If OS requested a memory overwrite perform it now for Embedded SRAM
  //
  if (MOR_CLEAR_MEMORY_VALUE (MorControl)) {
    DEBUG ((EFI_D_INFO, "Clear Embedded SRAM per MOR request.\n"));
    if (PcdGet32 (PcdESramMemorySize) > 0) {
      if (PcdGet32 (PcdEsramStage1Base) == 0) {
        //
        // ZeroMem() generates an ASSERT() if Buffer parameter is NULL.
        // Clear byte at 0 and start clear operation at address 1.
        //
        *(UINT8 *)(0) = 0;
        ZeroMem ((VOID *)1, (UINTN)PcdGet32 (PcdESramMemorySize) - 1);
      } else {
        ZeroMem (
          (VOID *)(UINTN)PcdGet32 (PcdEsramStage1Base),
          (UINTN)PcdGet32 (PcdESramMemorySize)
          );
      }
    }
  }

  //
  // Install PeiReset for PeiResetSystem service
  //
  Status = PeiServicesInstallPpi (&mPpiList[0]);
  ASSERT_EFI_ERROR (Status);

  //
  // Do QNC initialization after MRC
  //
  PeiQNCPostMemInit ();

  Status = PeiServicesInstallPpi (&mPpiStall[0]);
  ASSERT_EFI_ERROR (Status);

  //
  // Set E000/F000 Routing
  //
  RegData32 = QNCPortRead (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC);
  RegData32 |= (BIT2|BIT1);
  QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, RegData32);

  if (BootMode == BOOT_IN_RECOVERY_MODE) {
    // Do nothing here. A generic RecoveryModule will handle it.
  } else if (BootMode == BOOT_ON_S3_RESUME) {
    return EFI_SUCCESS;
  } else {
    PeiServicesInstallFvInfoPpi (
      NULL,
      (VOID *) (UINTN) PcdGet32 (PcdFlashFvMainBase),
      PcdGet32 (PcdFlashFvMainSize),
      NULL,
      NULL
      );

    //
    // Publish the FVMAIN FV so the DXE Phase can dispatch drivers from this FV
    // and produce Load File Protocols for UEFI Applications in this FV.
    //
    BuildFvHob (
      PcdGet32 (PcdFlashFvMainBase),
      PcdGet32 (PcdFlashFvMainSize)
      );

    //
    // Publish the Payload FV so the DXE Phase can dispatch drivers from this FV
    // and produce Load File Protocols for UEFI Applications in this FV.
    //
    BuildFvHob (
      PcdGet32 (PcdFlashFvPayloadBase),
      PcdGet32 (PcdFlashFvPayloadSize)
      );
  }

  //
  // Build flash HOB, it's going to be used by GCD and E820 building
  // Map full SPI flash decode range (regardless of smaller SPI flash parts installed)
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_FIRMWARE_DEVICE,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT    |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    (SIZE_4GB - SIZE_8MB),
    SIZE_8MB
    );

  //
  // Create a CPU hand-off information
  //
  CpuAddressWidth = 32;
  AsmCpuid (CPUID_EXTENDED_FUNCTION, &RegEax, NULL, NULL, NULL);
  if (RegEax >= CPUID_VIR_PHY_ADDRESS_SIZE) {
    AsmCpuid (CPUID_VIR_PHY_ADDRESS_SIZE, &RegEax, NULL, NULL, NULL);
    CpuAddressWidth = (UINT8) (RegEax & 0xFF);
  }
  DEBUG ((EFI_D_INFO, "CpuAddressWidth: %d\n", CpuAddressWidth));

  BuildCpuHob (CpuAddressWidth, 16);

  ASSERT_EFI_ERROR (Status);

  return Status;
}
Exemplo n.º 10
0
VOID
MiscInitialization (
  VOID
  )
{
  UINTN  PmCmd;
  UINTN  Pmba;
  UINTN  AcpiCtlReg;
  UINT8  AcpiEnBit;

  //
  // Disable A20 Mask
  //
  IoOr8 (0x92, BIT1);

  //
  // Build the CPU HOB with guest RAM size dependent address width and 16-bits
  // of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
  // S3 resume as well, so we build it unconditionally.)
  //
  BuildCpuHob (mPhysMemAddressWidth, 16);

  //
  // Determine platform type and save Host Bridge DID to PCD
  //
  switch (mHostBridgeDevId) {
    case INTEL_82441_DEVICE_ID:
      PmCmd      = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
      Pmba       = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
      AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
      AcpiEnBit  = PIIX4_PMREGMISC_PMIOSE;
      break;
    case INTEL_Q35_MCH_DEVICE_ID:
      PmCmd      = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
      Pmba       = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
      AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
      AcpiEnBit  = ICH9_ACPI_CNTL_ACPI_EN;
      break;
    default:
      DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
        __FUNCTION__, mHostBridgeDevId));
      ASSERT (FALSE);
      return;
  }
  PcdSet16 (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);

  //
  // If the appropriate IOspace enable bit is set, assume the ACPI PMBA
  // has been configured (e.g., by Xen) and skip the setup here.
  // This matches the logic in AcpiTimerLibConstructor ().
  //
  if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
    //
    // The PEI phase should be exited with fully accessibe ACPI PM IO space:
    // 1. set PMBA
    //
    PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));

    //
    // 2. set PCICMD/IOSE
    //
    PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);

    //
    // 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
    //
    PciOr8 (AcpiCtlReg, AcpiEnBit);
  }

  if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
    //
    // Set Root Complex Register Block BAR
    //
    PciWrite32 (
      POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
      ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
      );

    //
    // Set PCI Express Register Range Base Address
    //
    PciExBarInitialization ();
  }
}
Exemplo n.º 11
0
/**
  This is the entrypoint of PEIM

  @param  FileHandle  Handle of the file being invoked.
  @param  PeiServices Describes the list of possible PEI Services.

  @retval EFI_SUCCESS if it completed successfully.
**/
EFI_STATUS
EFIAPI
CbPeiEntryPoint (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS Status;
  UINT64 LowMemorySize, HighMemorySize;
  UINT64 PeiMemSize = SIZE_64MB;   // 64 MB
  EFI_PHYSICAL_ADDRESS PeiMemBase = 0;
  UINT32               RegEax;
  UINT8                PhysicalAddressBits;
  VOID*                pCbHeader;
  VOID*                pAcpiTable;
  UINT32               AcpiTableSize;
  VOID*                pSmbiosTable;
  UINT32               SmbiosTableSize;
  SYSTEM_TABLE_INFO*   pSystemTableInfo;
  FRAME_BUFFER_INFO    FbInfo;
  FRAME_BUFFER_INFO*   pFbInfo;
  ACPI_BOARD_INFO*     pAcpiBoardInfo;
  UINTN                PmCtrlRegBase, PmTimerRegBase, ResetRegAddress, ResetValue;

  LowMemorySize = 0;
  HighMemorySize = 0;

  Status = CbParseMemoryInfo (&LowMemorySize, &HighMemorySize);
  if (EFI_ERROR(Status))
    return Status;

  DEBUG((EFI_D_ERROR, "LowMemorySize: 0x%lx.\n", LowMemorySize));
  DEBUG((EFI_D_ERROR, "HighMemorySize: 0x%lx.\n", HighMemorySize));

  ASSERT (LowMemorySize > 0);

  BuildResourceDescriptorHob (
    EFI_RESOURCE_SYSTEM_MEMORY,
    (
    EFI_RESOURCE_ATTRIBUTE_PRESENT |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_TESTED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    (EFI_PHYSICAL_ADDRESS)(0),
    (UINT64)(0xA0000)
    );


  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_RESERVED,
    (
    EFI_RESOURCE_ATTRIBUTE_PRESENT |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
    EFI_RESOURCE_ATTRIBUTE_TESTED |
    EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
    EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    (EFI_PHYSICAL_ADDRESS)(0xA0000),
    (UINT64)(0x60000)
    );

   BuildResourceDescriptorHob (
    EFI_RESOURCE_SYSTEM_MEMORY,
    (
       EFI_RESOURCE_ATTRIBUTE_PRESENT |
       EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
       EFI_RESOURCE_ATTRIBUTE_TESTED |
       EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    (EFI_PHYSICAL_ADDRESS)(0x100000),
    (UINT64) (LowMemorySize - 0x100000)
    );

  if (HighMemorySize > 0) {
    BuildResourceDescriptorHob (
    EFI_RESOURCE_SYSTEM_MEMORY,
    (
       EFI_RESOURCE_ATTRIBUTE_PRESENT |
       EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
       EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE
    ),
    (EFI_PHYSICAL_ADDRESS)(0x100000000ULL),
    HighMemorySize
    );
  }

  //
  // Should be 64k aligned
  //
  PeiMemBase = (LowMemorySize - PeiMemSize) & (~(BASE_64KB - 1));

  DEBUG((EFI_D_ERROR, "PeiMemBase: 0x%lx.\n", PeiMemBase));
  DEBUG((EFI_D_ERROR, "PeiMemSize: 0x%lx.\n", PeiMemSize));

  Status = PeiServicesInstallPeiMemory (
         PeiMemBase,
         PeiMemSize
         );
  ASSERT_EFI_ERROR (Status);

  //
  // Set cache on the physical memory
  //
  MtrrSetMemoryAttribute (BASE_1MB, LowMemorySize - BASE_1MB, CacheWriteBack);
  MtrrSetMemoryAttribute (0, 0xA0000, CacheWriteBack);

  //
  // Create Memory Type Information HOB
  //
  BuildGuidDataHob (
    &gEfiMemoryTypeInformationGuid,
    mDefaultMemoryTypeInformation,
    sizeof(mDefaultMemoryTypeInformation)
    );

  //
  // Create Fv hob
  //
  CbPeiReportRemainedFvs ();

  BuildMemoryAllocationHob (
    PcdGet32 (PcdPayloadFdMemBase),
    PcdGet32 (PcdPayloadFdMemSize),
    EfiBootServicesData
    );

  //
  // Build CPU memory space and IO space hob
  //
  AsmCpuid (0x80000000, &RegEax, NULL, NULL, NULL);
  if (RegEax >= 0x80000008) {
    AsmCpuid (0x80000008, &RegEax, NULL, NULL, NULL);
    PhysicalAddressBits = (UINT8) RegEax;
  } else {
    PhysicalAddressBits  = 36;
  }
  //
  // Create a CPU hand-off information
  //
  BuildCpuHob (PhysicalAddressBits, 16);

  //
  // Report Local APIC range
  //
  BuildMemoryMappedIoRangeHob (0xFEC80000, SIZE_512KB);

  //
  // Boot mode
  //
  Status = PeiServicesSetBootMode (BOOT_WITH_FULL_CONFIGURATION);
  ASSERT_EFI_ERROR (Status);

  Status = PeiServicesInstallPpi (mPpiBootMode);
  ASSERT_EFI_ERROR (Status);

   //
  // Set pcd to save the upper coreboot header in case the dxecore will
  // erase 0~4k memory
  //
  pCbHeader = NULL;
  if ((CbParseGetCbHeader (1, &pCbHeader) == RETURN_SUCCESS)
    && ((UINTN)pCbHeader > BASE_4KB)) {
    DEBUG((EFI_D_ERROR, "Actual Coreboot header: %p.\n", pCbHeader));
    PcdSet32 (PcdCbHeaderPointer, (UINT32)(UINTN)pCbHeader);
  }

  //
  // Create guid hob for system tables like acpi table and smbios table
  //
  pAcpiTable = NULL;
  AcpiTableSize = 0;
  pSmbiosTable = NULL;
  SmbiosTableSize = 0;
  Status = CbParseAcpiTable (&pAcpiTable, &AcpiTableSize);
  if (EFI_ERROR (Status)) {
    // ACPI table is oblidgible
    DEBUG ((EFI_D_ERROR, "Failed to find the required acpi table\n"));
    ASSERT (FALSE);
  }
  CbParseSmbiosTable (&pSmbiosTable, &SmbiosTableSize);

  pSystemTableInfo = NULL;
  pSystemTableInfo = BuildGuidHob (&gUefiSystemTableInfoGuid, sizeof (SYSTEM_TABLE_INFO));
  ASSERT (pSystemTableInfo != NULL);
  pSystemTableInfo->AcpiTableBase = (UINT64) (UINTN)pAcpiTable;
  pSystemTableInfo->AcpiTableSize = AcpiTableSize;
  pSystemTableInfo->SmbiosTableBase = (UINT64) (UINTN)pSmbiosTable;
  pSystemTableInfo->SmbiosTableSize = SmbiosTableSize;
  DEBUG ((EFI_D_ERROR, "Detected Acpi Table at 0x%lx, length 0x%x\n", pSystemTableInfo->AcpiTableBase, pSystemTableInfo->AcpiTableSize));
  DEBUG ((EFI_D_ERROR, "Detected Smbios Table at 0x%lx, length 0x%x\n", pSystemTableInfo->SmbiosTableBase, pSystemTableInfo->SmbiosTableSize));
  DEBUG ((EFI_D_ERROR, "Create system table info guid hob\n"));

  //
  // Create guid hob for acpi board information
  //
  Status = CbParseFadtInfo (&PmCtrlRegBase, &PmTimerRegBase, &ResetRegAddress, &ResetValue);
  ASSERT_EFI_ERROR (Status);
  pAcpiBoardInfo = NULL;
  pAcpiBoardInfo = BuildGuidHob (&gUefiAcpiBoardInfoGuid, sizeof (ACPI_BOARD_INFO));
  ASSERT (pAcpiBoardInfo != NULL);
  pAcpiBoardInfo->PmCtrlRegBase = (UINT64)PmCtrlRegBase;
  pAcpiBoardInfo->PmTimerRegBase = (UINT64)PmTimerRegBase;
  pAcpiBoardInfo->ResetRegAddress = (UINT64)ResetRegAddress;
  pAcpiBoardInfo->ResetValue = (UINT8)ResetValue;
  DEBUG ((EFI_D_ERROR, "Create acpi board info guid hob\n"));

  //
  // Create guid hob for frame buffer information
  //
  ZeroMem (&FbInfo, sizeof (FRAME_BUFFER_INFO));
  Status = CbParseFbInfo (&FbInfo);
  if (!EFI_ERROR (Status)) {
    pFbInfo = BuildGuidHob (&gUefiFrameBufferInfoGuid, sizeof (FRAME_BUFFER_INFO));
    ASSERT (pSystemTableInfo != NULL);
    CopyMem (pFbInfo, &FbInfo, sizeof (FRAME_BUFFER_INFO));
    DEBUG ((EFI_D_ERROR, "Create frame buffer info guid hob\n"));
  }

  //
  // Mask off all legacy 8259 interrupt sources
  //
  IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, 0xFF);
  IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE,  0xFF);

  return EFI_SUCCESS;
}
Exemplo n.º 12
0
/**
  Install Firmware Volume Hob's once there is main memory

  @param[in]  PeiServices       General purpose services available to every PEIM.
  @param[in]  NotifyDescriptor  Notify that this module published.
  @param[in]  Ppi               PPI that was installed.

  @retval   EFI_SUCCESS         The function completed successfully.

**/
EFI_STATUS
EFIAPI
MemoryDiscoveredPpiNotifyCallback (
  IN CONST EFI_PEI_SERVICES     **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  EFI_CPUID_REGISTER          FeatureInfo;
  UINT8                       CpuAddressWidth;
  UINT32                      RootComplexBar;
  UINT32                      PmcBase;
  UINT32                      IoBase;
  UINT32                      IlbBase;
  UINT32                      SpiBase;
  UINT32                      MphyBase;
  UINT32                      PunitBase;

  //
  // Pulish memory type info
  //
  PublishMemoryTypeInfo ();

  RootComplexBar = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_RCBA) & B_PCH_LPC_RCBA_BAR;
  DEBUG ((EFI_D_INFO, "RootComplexBar     : 0x%x\n", RootComplexBar));
  ASSERT (RootComplexBar != 0 && RootComplexBar != B_PCH_LPC_RCBA_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    RootComplexBar,
    0x1000
    );

  PmcBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_PMC_BASE) & B_PCH_LPC_PMC_BASE_BAR;
  DEBUG ((EFI_D_INFO, "PmcBase            : 0x%x\n", PmcBase));
  ASSERT (PmcBase != 0 && PmcBase != B_PCH_LPC_PMC_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    PmcBase,
    0x1000
    );

  IoBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_IO_BASE) & B_PCH_LPC_IO_BASE_BAR;
  DEBUG ((EFI_D_INFO, "IoBase             : 0x%x\n", IoBase));
  ASSERT (IoBase != 0 && IoBase != B_PCH_LPC_IO_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IoBase,
    0x40000
    );

  IlbBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_ILB_BASE) & B_PCH_LPC_ILB_BASE_BAR;
  DEBUG ((EFI_D_INFO, "IlbBase            : 0x%x\n", IlbBase));
  ASSERT (IlbBase != 0 && IlbBase != B_PCH_LPC_ILB_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IlbBase,
    0x2000
    );

  SpiBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_SPI_BASE) & B_PCH_LPC_SPI_BASE_BAR;
  DEBUG ((EFI_D_INFO, "SpiBase            : 0x%x\n", SpiBase));
  ASSERT (SpiBase != 0 && SpiBase != B_PCH_LPC_SPI_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    SpiBase,
    0x1000
    );

  MphyBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_MPHY_BASE) & B_PCH_LPC_MPHY_BASE_BAR;
  DEBUG ((EFI_D_INFO, "MphyBase           : 0x%x\n", MphyBase));
  ASSERT (MphyBase != 0 && MphyBase != B_PCH_LPC_MPHY_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    MphyBase,
    0x100000
    );

  PunitBase = MmPci32 (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_PUNIT_BASE) & B_PCH_LPC_PUNIT_BASE_BAR;
  DEBUG ((EFI_D_INFO, "PunitBase          : 0x%x\n", PunitBase));
  ASSERT (PunitBase != 0 && PunitBase != B_PCH_LPC_PUNIT_BASE_BAR);
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    PunitBase,
    0x1000
    );
  //
  // Local APIC
  //
  DEBUG ((EFI_D_INFO, "LOCAL_APIC_ADDRESS : 0x%x\n", LOCAL_APIC_ADDRESS));
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    LOCAL_APIC_ADDRESS,
    0x1000
  );
  //
  // IO APIC
  //
  DEBUG ((EFI_D_INFO, "IO_APIC_ADDRESS    : 0x%x\n", IO_APIC_ADDRESS));
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IO_APIC_ADDRESS,
    0x1000
  );
  //
  // Adding the PCIE Express area to the E820 memory table as type 2 memory.
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    ((UINTN)PcdGet64(PcdPciExpressBaseAddress)), //PlatformInfo->PciData.PciExpressBase,
    0x10000000 //PlatformInfo->PciData.PciExpressSize
    );
  //
  // Adding the Flashpart to the E820 memory table as type 2 memory.
  //
  DEBUG ((EFI_D_INFO, "FLASH_BASE_ADDRESS : 0x%x\n", PcdGet32(PcdFlashAreaBaseAddress)));
  BuildResourceDescriptorHob (
    EFI_RESOURCE_FIRMWARE_DEVICE,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    PcdGet32(PcdFlashAreaBaseAddress),
    PcdGet32(PcdFlashAreaSize)
    );

  //
  // Create a CPU hand-off information
  //
  CpuAddressWidth = 32;
  AsmCpuid (EFI_CPUID_EXTENDED_FUNCTION, &FeatureInfo.RegEax, &FeatureInfo.RegEbx, &FeatureInfo.RegEcx, &FeatureInfo.RegEdx);
  if (FeatureInfo.RegEax >= EFI_CPUID_VIRT_PHYS_ADDRESS_SIZE) {
    AsmCpuid (EFI_CPUID_VIRT_PHYS_ADDRESS_SIZE, &FeatureInfo.RegEax, &FeatureInfo.RegEbx, &FeatureInfo.RegEcx, &FeatureInfo.RegEdx);
    CpuAddressWidth = (UINT8) (FeatureInfo.RegEax & 0xFF);
  }

  BuildCpuHob(CpuAddressWidth, 16);

  return EFI_SUCCESS;
}
Exemplo n.º 13
0
VOID
PrePiMain (
  IN  UINTN                     UefiMemoryBase,
  IN  UINTN                     StacksBase,
  IN  UINT64                    StartTimeStamp
  )
{
  EFI_HOB_HANDOFF_INFO_TABLE*   HobList;
  EFI_STATUS                    Status;
  CHAR8                         Buffer[100];
  UINTN                         CharCount;
  UINTN                         StacksSize;

  // Initialize the architecture specific bits
  ArchInitialize ();

  // Declare the PI/UEFI memory region
  HobList = HobConstructor (
    (VOID*)UefiMemoryBase,
    FixedPcdGet32 (PcdSystemMemoryUefiRegionSize),
    (VOID*)UefiMemoryBase,
    (VOID*)StacksBase  // The top of the UEFI Memory is reserved for the stacks
    );
  PrePeiSetHobList (HobList);

  //
  // Ensure that the loaded image is invalidated in the caches, so that any
  // modifications we made with the caches and MMU off (such as the applied
  // relocations) don't become invisible once we turn them on.
  //
  InvalidateDataCacheRange((VOID *)(UINTN)PcdGet64 (PcdFdBaseAddress), PcdGet32 (PcdFdSize));

  // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
  Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
  ASSERT_EFI_ERROR (Status);

  // Initialize the Serial Port
  SerialPortInitialize ();
  CharCount = AsciiSPrint (Buffer,sizeof (Buffer),"UEFI firmware (version %s built at %a on %a)\n\r",
    (CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
  SerialPortWrite ((UINT8 *) Buffer, CharCount);

  // Create the Stacks HOB (reserve the memory for all stacks)
  StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
  BuildStackHob (StacksBase, StacksSize);

  //TODO: Call CpuPei as a library
  BuildCpuHob (PcdGet8 (PcdPrePiCpuMemorySize), PcdGet8 (PcdPrePiCpuIoSize));

  // Set the Boot Mode
  SetBootMode (ArmPlatformGetBootMode ());

  // Initialize Platform HOBs (CpuHob and FvHob)
  Status = PlatformPeim ();
  ASSERT_EFI_ERROR (Status);

  // Now, the HOB List has been initialized, we can register performance information
  PERF_START (NULL, "PEI", NULL, StartTimeStamp);

  // SEC phase needs to run library constructors by hand.
  ExtractGuidedSectionLibConstructor ();
  LzmaDecompressLibConstructor ();

  // Build HOBs to pass up our version of stuff the DXE Core needs to save space
  BuildPeCoffLoaderHob ();
  BuildExtractSectionHob (
    &gLzmaCustomDecompressGuid,
    LzmaGuidedSectionGetInfo,
    LzmaGuidedSectionExtraction
    );

  // Assume the FV that contains the SEC (our code) also contains a compressed FV.
  Status = DecompressFirstFv ();
  ASSERT_EFI_ERROR (Status);

  // Load the DXE Core and transfer control to it
  Status = LoadDxeCoreFromFv (NULL, 0);
  ASSERT_EFI_ERROR (Status);
}
Exemplo n.º 14
0
VOID
PrePiMain (
  IN  UINTN                     UefiMemoryBase,
  IN  UINTN                     StacksBase,
  IN  UINT64                    StartTimeStamp
  )
{
  EFI_HOB_HANDOFF_INFO_TABLE*   HobList;
  ARM_MP_CORE_INFO_PPI*         ArmMpCoreInfoPpi;
  UINTN                         ArmCoreCount;
  ARM_CORE_INFO*                ArmCoreInfoTable;
  EFI_STATUS                    Status;
  CHAR8                         Buffer[100];
  UINTN                         CharCount;
  UINTN                         StacksSize;

  // If ensure the FD is either part of the System Memory or totally outside of the System Memory (XIP)
  ASSERT (IS_XIP() ||
          ((FixedPcdGet64 (PcdFdBaseAddress) >= FixedPcdGet64 (PcdSystemMemoryBase)) &&
           ((UINT64)(FixedPcdGet64 (PcdFdBaseAddress) + FixedPcdGet32 (PcdFdSize)) <= (UINT64)mSystemMemoryEnd)));

  // Initialize the architecture specific bits
  ArchInitialize ();

  // Initialize the Serial Port
  SerialPortInitialize ();
  CharCount = AsciiSPrint (Buffer,sizeof (Buffer),"UEFI firmware (version %s built at %a on %a)\n\r",
    (CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
  SerialPortWrite ((UINT8 *) Buffer, CharCount);

  // Initialize the Debug Agent for Source Level Debugging
  InitializeDebugAgent (DEBUG_AGENT_INIT_POSTMEM_SEC, NULL, NULL);
  SaveAndSetDebugTimerInterrupt (TRUE);

  // Declare the PI/UEFI memory region
  HobList = HobConstructor (
    (VOID*)UefiMemoryBase,
    FixedPcdGet32 (PcdSystemMemoryUefiRegionSize),
    (VOID*)UefiMemoryBase,
    (VOID*)StacksBase  // The top of the UEFI Memory is reserved for the stacks
    );
  PrePeiSetHobList (HobList);

  // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
  Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
  ASSERT_EFI_ERROR (Status);

  // Create the Stacks HOB (reserve the memory for all stacks)
  if (ArmIsMpCore ()) {
    StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize) +
                 ((FixedPcdGet32 (PcdCoreCount) - 1) * FixedPcdGet32 (PcdCPUCoreSecondaryStackSize));
  } else {
    StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
  }
  BuildStackHob (StacksBase, StacksSize);

  //TODO: Call CpuPei as a library
  BuildCpuHob (PcdGet8 (PcdPrePiCpuMemorySize), PcdGet8 (PcdPrePiCpuIoSize));

  if (ArmIsMpCore ()) {
    // Only MP Core platform need to produce gArmMpCoreInfoPpiGuid
    Status = GetPlatformPpi (&gArmMpCoreInfoPpiGuid, (VOID**)&ArmMpCoreInfoPpi);

    // On MP Core Platform we must implement the ARM MP Core Info PPI (gArmMpCoreInfoPpiGuid)
    ASSERT_EFI_ERROR (Status);

    // Build the MP Core Info Table
    ArmCoreCount = 0;
    Status = ArmMpCoreInfoPpi->GetMpCoreInfo (&ArmCoreCount, &ArmCoreInfoTable);
    if (!EFI_ERROR(Status) && (ArmCoreCount > 0)) {
      // Build MPCore Info HOB
      BuildGuidDataHob (&gArmMpCoreInfoGuid, ArmCoreInfoTable, sizeof (ARM_CORE_INFO) * ArmCoreCount);
    }
  }

  // Set the Boot Mode
  SetBootMode (ArmPlatformGetBootMode ());

  // Initialize Platform HOBs (CpuHob and FvHob)
  Status = PlatformPeim ();
  ASSERT_EFI_ERROR (Status);

  // Now, the HOB List has been initialized, we can register performance information
  PERF_START (NULL, "PEI", NULL, StartTimeStamp);

  // SEC phase needs to run library constructors by hand.
  ExtractGuidedSectionLibConstructor ();
  LzmaDecompressLibConstructor ();

  // Build HOBs to pass up our version of stuff the DXE Core needs to save space
  BuildPeCoffLoaderHob ();
  BuildExtractSectionHob (
    &gLzmaCustomDecompressGuid,
    LzmaGuidedSectionGetInfo,
    LzmaGuidedSectionExtraction
    );

  // Assume the FV that contains the SEC (our code) also contains a compressed FV.
  Status = DecompressFirstFv ();
  ASSERT_EFI_ERROR (Status);

  // Load the DXE Core and transfer control to it
  Status = LoadDxeCoreFromFv (NULL, 0);
  ASSERT_EFI_ERROR (Status);
}
Exemplo n.º 15
0
EFI_STATUS
EFIAPI
MemoryDiscoveredPpiNotifyCallback (
  IN CONST EFI_PEI_SERVICES           **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  EFI_STATUS                  Status;
  EFI_BOOT_MODE               BootMode;
  EFI_CPUID_REGISTER          FeatureInfo;
  UINT8                       CpuAddressWidth;
  UINT16                      Pm1Cnt;
  EFI_PEI_HOB_POINTERS        Hob;
  EFI_PLATFORM_INFO_HOB       *PlatformInfo;
  UINT32                      RootComplexBar;
  UINT32                      PmcBase;
  UINT32                      IoBase;
  UINT32                      IlbBase;
  UINT32                      SpiBase;
  UINT32                      MphyBase;

  //
  // Get Platform Info HOB
  //
  Hob.Raw = GetFirstGuidHob (&gEfiPlatformInfoGuid);
  ASSERT (Hob.Raw != NULL);
  PlatformInfo = GET_GUID_HOB_DATA(Hob.Raw);

  Status = (*PeiServices)->GetBootMode (PeiServices, &BootMode);

  //
  // Check if user wants to turn off in PEI phase
  //
  if ((BootMode != BOOT_ON_S3_RESUME) && (BootMode != BOOT_ON_FLASH_UPDATE)) {
    CheckPowerOffNow();
  } else {
    Pm1Cnt  = IoRead16 (ACPI_BASE_ADDRESS + R_PCH_ACPI_PM1_CNT);
    Pm1Cnt &= ~B_PCH_ACPI_PM1_CNT_SLP_TYP;
    IoWrite16 (ACPI_BASE_ADDRESS + R_PCH_ACPI_PM1_CNT, Pm1Cnt);
  }

  #ifndef MINNOW2_FSP_BUILD
  //
  // Set PEI cache mode here
  //
  SetPeiCacheMode (PeiServices);
  #endif

  //
  //  Pulish memory tyoe info
  //
  PublishMemoryTypeInfo ();

  //
  // Work done if on a S3 resume
  //
  if (BootMode == BOOT_ON_S3_RESUME) {
    //
    //Program the side band packet register to send a sideband message to Punit
    //To indicate that DRAM has been initialized and PUNIT FW base address in memory.
    //
    return EFI_SUCCESS;
  }

  RootComplexBar = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_RCBA ) & B_PCH_LPC_RCBA_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    RootComplexBar,
    0x1000
    );
  DEBUG ((EFI_D_INFO, "RootComplexBar     : 0x%x\n", RootComplexBar));

  PmcBase = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_PMC_BASE ) & B_PCH_LPC_PMC_BASE_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    PmcBase,
    0x1000
    );
  DEBUG ((EFI_D_INFO, "PmcBase            : 0x%x\n", PmcBase));

  IoBase = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_IO_BASE ) & B_PCH_LPC_IO_BASE_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IoBase,
    0x4000
    );
  DEBUG ((EFI_D_INFO, "IoBase             : 0x%x\n", IoBase));

  IlbBase = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_ILB_BASE ) & B_PCH_LPC_ILB_BASE_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IlbBase,
    0x1000
    );
  DEBUG ((EFI_D_INFO, "IlbBase            : 0x%x\n", IlbBase));

  SpiBase = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_SPI_BASE ) & B_PCH_LPC_SPI_BASE_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    SpiBase,
    0x1000
    );
  DEBUG ((EFI_D_INFO, "SpiBase            : 0x%x\n", SpiBase));

  MphyBase = MmPci32( 0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, R_PCH_LPC_MPHY_BASE ) & B_PCH_LPC_MPHY_BASE_BAR;
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    MphyBase,
    0x100000
    );
  DEBUG ((EFI_D_INFO, "MphyBase           : 0x%x\n", MphyBase));

  //
  // Local APIC
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    LOCAL_APIC_ADDRESS,
    0x1000
  );
  DEBUG ((EFI_D_INFO, "LOCAL_APIC_ADDRESS : 0x%x\n", LOCAL_APIC_ADDRESS));

  //
  // IO APIC
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    IO_APIC_ADDRESS,
    0x1000
  );
  DEBUG ((EFI_D_INFO, "IO_APIC_ADDRESS    : 0x%x\n", IO_APIC_ADDRESS));

  //
  // Adding the PCIE Express area to the E820 memory table as type 2 memory.
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    PlatformInfo->PciData.PciExpressBase,
    PlatformInfo->PciData.PciExpressSize
    );
  DEBUG ((EFI_D_INFO, "PciExpressBase     : 0x%x\n", PlatformInfo->PciData.PciExpressBase));

  //
  // Adding the Flashpart to the E820 memory table as type 2 memory.
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_FIRMWARE_DEVICE,
    (EFI_RESOURCE_ATTRIBUTE_PRESENT | EFI_RESOURCE_ATTRIBUTE_INITIALIZED | EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE),
    FixedPcdGet32 (PcdFlashAreaBaseAddress),
    FixedPcdGet32 (PcdFlashAreaSize)
    );
  DEBUG ((EFI_D_INFO, "FLASH_BASE_ADDRESS : 0x%x\n", FixedPcdGet32 (PcdFlashAreaBaseAddress)));

  //
  // Create a CPU hand-off information
  //
  CpuAddressWidth = 32;
  AsmCpuid (EFI_CPUID_EXTENDED_FUNCTION, &FeatureInfo.RegEax, &FeatureInfo.RegEbx, &FeatureInfo.RegEcx, &FeatureInfo.RegEdx);
  if (FeatureInfo.RegEax >= EFI_CPUID_VIRT_PHYS_ADDRESS_SIZE) {
    AsmCpuid (EFI_CPUID_VIRT_PHYS_ADDRESS_SIZE, &FeatureInfo.RegEax, &FeatureInfo.RegEbx, &FeatureInfo.RegEcx, &FeatureInfo.RegEdx);
    CpuAddressWidth = (UINT8) (FeatureInfo.RegEax & 0xFF);
  }

  BuildCpuHob(CpuAddressWidth, 16);
  ASSERT_EFI_ERROR (Status);

  return Status;

}