static int detach_inform(struct i2c_client *client)
{
int i;
struct cx18 *cx = (struct cx18 *)i2c_get_adapdata(client->adapter);
CX18_DEBUG_I2C("i2c client detach\n");
for (i = 0; i < I2C_CLIENTS_MAX; i++) {
if (cx->i2c_clients[i] == client) {
cx->i2c_clients[i] = NULL;
break;
}
}
CX18_DEBUG_I2C("i2c detach [client=%s,%s]\n",
client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed");
return 0;
}
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
int i;
CX18_DEBUG_I2C("i2c init\n");
for (i = 0; i < 2; i++) {
memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template,
sizeof(struct i2c_adapter));
memcpy(&cx->i2c_algo[i], &cx18_i2c_algo_template,
sizeof(struct i2c_algo_bit_data));
cx->i2c_algo_cb_data[i].cx = cx;
cx->i2c_algo_cb_data[i].bus_index = i;
cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i];
cx->i2c_adap[i].algo_data = &cx->i2c_algo[i];
sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name),
" #%d-%d", cx->num, i);
i2c_set_adapdata(&cx->i2c_adap[i], cx);
memcpy(&cx->i2c_client[i], &cx18_i2c_client_template,
sizeof(struct i2c_client));
sprintf(cx->i2c_client[i].name +
strlen(cx->i2c_client[i].name), "%d", i);
cx->i2c_client[i].adapter = &cx->i2c_adap[i];
cx->i2c_adap[i].dev.parent = &cx->dev->dev;
}
if (read_reg(CX18_REG_I2C_2_WR) != 0x0003c02f) {
/* Reset/Unreset I2C hardware block */
write_reg(0x10000000, 0xc71004); /* Clock select 220MHz */
write_reg_sync(0x10001000, 0xc71024); /* Clock Enable */
}
/* courtesy of Steven Toth <*****@*****.**> */
write_reg_sync(0x00c00000, 0xc7001c);
mdelay(10);
write_reg_sync(0x00c000c0, 0xc7001c);
mdelay(10);
write_reg_sync(0x00c00000, 0xc7001c);
write_reg_sync(0x00c00000, 0xc730c8); /* Set to edge-triggered intrs. */
write_reg_sync(0x00c00000, 0xc730c4); /* Clear any stale intrs */
/* Hw I2C1 Clock Freq ~100kHz */
write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_1_WR);
cx18_setscl(&cx->i2c_algo_cb_data[0], 1);
cx18_setsda(&cx->i2c_algo_cb_data[0], 1);
/* Hw I2C2 Clock Freq ~100kHz */
write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_2_WR);
cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
cx18_reset_i2c_slaves_gpio(cx);
return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
i2c_bit_add_bus(&cx->i2c_adap[1]);
}
void exit_cx18_i2c(struct cx18 *cx)
{
int i;
CX18_DEBUG_I2C("i2c exit\n");
write_reg(read_reg(CX18_REG_I2C_1_WR) | 4, CX18_REG_I2C_1_WR);
write_reg(read_reg(CX18_REG_I2C_2_WR) | 4, CX18_REG_I2C_2_WR);
for (i = 0; i < 2; i++) {
i2c_del_adapter(&cx->i2c_adap[i]);
}
}
int cx18_i2c_register(struct cx18 *cx, unsigned idx)
{
struct i2c_board_info info;
struct i2c_client *c;
u8 id, bus;
int i;
CX18_DEBUG_I2C("i2c client register\n");
if (idx >= ARRAY_SIZE(hw_driverids) || hw_driverids[idx] == 0)
return -1;
id = hw_driverids[idx];
bus = hw_bus[idx];
memset(&info, 0, sizeof(info));
strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
info.addr = hw_addrs[idx];
for (i = 0; i < I2C_CLIENTS_MAX; i++)
if (cx->i2c_clients[i] == NULL)
break;
if (i == I2C_CLIENTS_MAX) {
CX18_ERR("insufficient room for new I2C client!\n");
return -ENOMEM;
}
if (id != I2C_DRIVERID_TUNER) {
c = i2c_new_device(&cx->i2c_adap[bus], &info);
if (c->driver == NULL)
i2c_unregister_device(c);
else
cx->i2c_clients[i] = c;
return cx->i2c_clients[i] ? 0 : -ENODEV;
}
/* special tuner handling */
c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->radio);
if (c && c->driver == NULL)
i2c_unregister_device(c);
else if (c)
cx->i2c_clients[i++] = c;
c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->demod);
if (c && c->driver == NULL)
i2c_unregister_device(c);
else if (c)
cx->i2c_clients[i++] = c;
c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->tv);
if (c && c->driver == NULL)
i2c_unregister_device(c);
else if (c)
cx->i2c_clients[i++] = c;
return 0;
}
int cx18_call_i2c_client(struct cx18 *cx, int addr, unsigned cmd, void *arg)
{
struct i2c_client *client;
int retval;
int i;
CX18_DEBUG_I2C("call_i2c_client addr=%02x\n", addr);
for (i = 0; i < I2C_CLIENTS_MAX; i++) {
client = cx->i2c_clients[i];
if (client == NULL || client->driver == NULL ||
client->driver->command == NULL)
continue;
if (addr == client->addr) {
retval = client->driver->command(client, cmd, arg);
return retval;
}
}
if (cmd != VIDIOC_G_CHIP_IDENT)
CX18_ERR("i2c addr 0x%02x not found for cmd 0x%x!\n",
addr, cmd);
return -ENODEV;
}
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
int i;
CX18_DEBUG_I2C("i2c init\n");
/* Sanity checks for the I2C hardware arrays. They must be the
* same size and GPIO/CX23418 must be the last entries.
*/
if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) ||
ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) ||
CX18_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 2)) ||
CX18_HW_CX23418 != (1 << (ARRAY_SIZE(hw_addrs) - 1)) ||
hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) {
CX18_ERR("Mismatched I2C hardware arrays\n");
return -ENODEV;
}
for (i = 0; i < 2; i++) {
memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template,
sizeof(struct i2c_adapter));
memcpy(&cx->i2c_algo[i], &cx18_i2c_algo_template,
sizeof(struct i2c_algo_bit_data));
cx->i2c_algo_cb_data[i].cx = cx;
cx->i2c_algo_cb_data[i].bus_index = i;
cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i];
cx->i2c_adap[i].algo_data = &cx->i2c_algo[i];
sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name),
" #%d-%d", cx->num, i);
i2c_set_adapdata(&cx->i2c_adap[i], cx);
memcpy(&cx->i2c_client[i], &cx18_i2c_client_template,
sizeof(struct i2c_client));
sprintf(cx->i2c_client[i].name +
strlen(cx->i2c_client[i].name), "%d", i);
cx->i2c_client[i].adapter = &cx->i2c_adap[i];
cx->i2c_adap[i].dev.parent = &cx->dev->dev;
}
if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) {
/* Reset/Unreset I2C hardware block */
/* Clock select 220MHz */
cx18_write_reg_expect(cx, 0x10000000, 0xc71004,
0x00000000, 0x10001000);
/* Clock Enable */
cx18_write_reg_expect(cx, 0x10001000, 0xc71024,
0x00001000, 0x10001000);
}
/* courtesy of Steven Toth <*****@*****.**> */
cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
mdelay(10);
cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0);
mdelay(10);
cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
mdelay(10);
/* Set to edge-triggered intrs. */
cx18_write_reg(cx, 0x00c00000, 0xc730c8);
/* Clear any stale intrs */
cx18_write_reg_expect(cx, HW2_I2C1_INT|HW2_I2C2_INT, HW2_INT_CLR_STATUS,
~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT);
/* Hw I2C1 Clock Freq ~100kHz */
cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
cx18_setscl(&cx->i2c_algo_cb_data[0], 1);
cx18_setsda(&cx->i2c_algo_cb_data[0], 1);
/* Hw I2C2 Clock Freq ~100kHz */
cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR);
cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
cx18_reset_i2c_slaves_gpio(cx);
return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
i2c_bit_add_bus(&cx->i2c_adap[1]);
}
