void COTPPancel::OnLockOtp()
{
// TODO: Add your control notification handler code here
OTP_ReadWrite OTPReadWrite = {0};
ReadWriteComReq();
RefreshMainDlgMsgBox("Lock OTP:");
if(MessageBox("Will Lock OTP, confirm ?",NULL,MB_YESNO|MB_ICONWARNING) == IDYES)
{
if(Write_OTP_FLAG(gComPortInfo.ComID,&OTPReadWrite) == TRUE)
{
AddInfotoMainDlgMsgBox("Success!");
}
else
{
AddInfotoMainDlgMsgBox("Failed!");
}
}
else
{
AddInfotoMainDlgMsgBox("Cancel!");
}
CloseComPort();
}
// main
int main(int argc, char* argv[]){
ComPortHandle comPort;
int go = TRUE;
char* dev;
char a;
a='\0';
dev=&a;
if(argc<2){//No port specified at commandline so search for attached devices
dev=scandev();
if(strcmp(dev,"")!=0){
//printf("Attempting to open port...%s\n",dev);
comPort = OpenComPort(dev);
}
else{
printf("Failed to find attached device.\n");
return FALSE;
}
}
else{//Open port specified at commandline
printf("Attempting to open port...%s\n",argv[1]);
comPort = OpenComPort(argv[1]);
}
if(comPort > 0){
//printf("Connected. \n\n");
/*
while(go){//continue until user chooses to exit
unsigned int command;
command = 0xc1;
usleep(500000);//short sleep between commands
go=CommandDialog(comPort,command);
}*/
unsigned int command;
command = 0xd2;
CommandDialog(comPort,command);
// printf("EXITING\n");
CloseComPort(comPort);
}
return 0;
}
//设置DCB结构体
BOOL CSerialPorts::SetDCBParam()
{
if(FALSE==CheckPortOpen())
return FALSE;
if(FALSE==GetCommState(hCom,&m_dcb))
{
AfxMessageBox(_T("串口连接失败，请重新连接！"));
CloseComPort();
return FALSE;
}
switch(m_nBaud)
{
case 0:
m_nBaud=9600; break;
case 1:
m_nBaud=19200; break;
case 2:
m_nBaud=38400; break;
case 3:
m_nBaud=57600; break;
case 4:
m_nBaud=115200; break;
}
//m_dcb.BaudRate=m_nBaud;
m_dcb.ByteSize=m_nDataBits;
switch(m_nParity)
{
case 0:
m_dcb.Parity=NOPARITY; break;
case 1:
m_dcb.Parity=ODDPARITY; break;
case 2:
m_dcb.Parity=EVENPARITY;break;
}
switch(m_nStopBits)
{
case 0:
m_dcb.StopBits=ONESTOPBIT; break;
//case 1:
// m_dcb.StopBits=ONESSTOPBITS;break;
case 2:
m_dcb.StopBits=TWOSTOPBITS; break;
}
m_dcb.StopBits=m_nStopBits;
SetCommState(hCom,&m_dcb);
return TRUE;
}
//设置端口缓冲区大小
BOOL CSerialPorts::SetPortBuffSize()
{
if(FALSE==CheckPortOpen())
return FALSE;
if(FALSE==SetupComm(hCom,m_inputBuff,m_outputBuff))
{
AfxMessageBox(_T("串口数据缓冲区设置失败，请重新连接！"));
CloseComPort();
return FALSE;
}
else
return TRUE;
}
//打开并初始化串口
BOOL CSerialPorts::InitComPortSet(int nCom, int nBaud,int nParity)
{
//检查串口是否已经打开
if(TRUE==CheckPortOpen())
CloseComPort();
//设置异步读写事件
if(FALSE==SetEventToReadWrite())
AfxMessageBox(_T("串口连接设置失败，请重新连接！"));
//设置波特率、串口名和校验方式
m_nBaud=nBaud;
m_nParity=nParity;
switch(nCom)
{
case 0: m_cName=_T("COM1"); break;
case 1: m_cName=_T("COM2"); break;
case 2: m_cName=_T("COM3"); break;
case 3: m_cName=_T("COM4"); break;
case 4: m_cName=_T("COM5"); break;
case 5: m_cName=_T("COM6"); break;
case 6: m_cName=_T("COM7"); break;
case 7: m_cName=_T("COM8"); break;
}
//打开端口
hCom=CreateFile(m_cName, //端口名
GENERIC_READ|GENERIC_WRITE, //访问类型：读写
0, //是否共享端口，0为独占
NULL, //默认安全性
OPEN_EXISTING, //只打开而不创建
FILE_ATTRIBUTE_NORMAL|FILE_FLAG_OVERLAPPED, //重叠方式
NULL); //端口打开时不需要，参数为0
if(INVALID_HANDLE_VALUE==hCom)
return FALSE;
//设置串口缓冲区大小
SetPortBuffSize();
//设置DCB结构体
if(FALSE==SetDCBParam())
return FALSE;
//设置超时结构体
SetTimerOut();
//清空串口数据缓冲区
PurgeComm(hCom,PURGE_RXABORT|PURGE_RXCLEAR|PURGE_TXCLEAR|PURGE_TXABORT);
return TRUE;
}
/* ----------------------------------Main----------------------------------- */
int main(int argc, char* argv[]){
ComPortHandle comPort;
int go = TRUE;
char* dev;
char a;
a='\0';
dev=&a;
if(argc<2) {
//No port specified at commandline so search for attached devices
dev=scandev();
if(strcmp(dev,"")!=0) {
//printf("Attempting to open port...%s\n",dev);
comPort = OpenComPort(dev);
}
else {
printf("Failed to find attached device.\n");
return FALSE;
}
}
else {
//Open port specified at commandline
printf("Attempting to open port...%s\n",argv[1]);
comPort = OpenComPort(argv[1]);
}
if(comPort > 0) {
unsigned int command;
command = 0xd2;
CommandDialog(comPort,command);
CloseComPort(comPort);
}
return 0;
}
/**
*
* @brief Open device and perform configuration
*
* @return bool true on success, false if error
*/
bool Instek8261Serial::InitDevice(void) {
bool success = false;
if (OpenDevice()) {
for (int i = 0; i < 4; i++) {
// Try to read version number
if (PrimeSerialStream()) {
success = true;
break;
}
}
} else {
CloseComPort();
}
if (success) {
sprintf(m_buffer, "sens:det:rate M\n");
// printf("%ld ms, Sending cmd: %s", cmdTimer.GetElapsedMillisec(), m_buffer);
int length = strlen(m_buffer);
SendCmd(m_buffer, length);
}
return success;
}
/*******************************************************************************
extern message is called by a calling application
*******************************************************************************/
int APIENTRY UpsStatus(HAB hab, ULONG msg, MPARAM mp1, PUPSSTATUS pups)
{
int retcode = ERROR_BAD_COMMAND;
int x;
switch(msg)
{
case cmd_init:
memset(&upst, 0, sizeof(UPSSTATUS));
upst.size = sizeof(UPSSTATUS);
upst.strucid = STRUCTURE_ID;
if(0 != (retcode = CloseComPort())) break; //stops any poll, and inits the various flags
if(pups)
{
upst.msgfile = pups->msgfile;
if(upst.msgfile) sprintmsg(infostr, upst.msgfile, "CONNECT1");
pups->infostr = infostr;
}
if(0 != (retcode = OpenComPort((char*)mp1))) break;
threadid = _beginthread(MessageThread, NULL, 0x4000, NULL);
DosSleep(1);
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(0 != (retcode = SendUPSMsg(UPS_Inf, NULL))) break;
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(0 != (retcode = SendUPSMsg(UPS_Rate, NULL))) break;
retcode = waitformessage(hab, 0, pups);
break;
case cmd_info:
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(upst.msgfile) sprintmsg(infostr, upst.msgfile, "MEGATEC1",
upspr.name, upspr.model, upspr.version,
Mix_to_d(upspr.voltage), Mix_to_d(upspr.current), Mix_to_d(upspr.frequency),
Mix_to_d(upspr.battery));
break;
case cmd_quiet:
StopPoll = TRUE;
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(_flagtest(upst.upsstatus, stat_buzzer) ^ (!mp1))
{
if(0 != (retcode = SendUPSMsg(UPS_Quiet, NULL))) break;
retcode = waitformessage(hab, 0, pups);
break;
}
else retcode = NO_ERROR;
break;
case cmd_test:
StopPoll = TRUE;
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(((int)mp1) == -1) retcode = SendUPSMsg(UPS_TestL, NULL);
retcode = SendUPSMsg(UPS_Test, mp1);
if(0 != retcode) break;
StopPoll = FALSE;
retcode = waitformessage(hab, 0, pups);
break;
case cmd_abort:
StopPoll = TRUE;
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(_flagtest(upst.upsstatus, stat_testing)) retcode = SendUPSMsg(UPS_CancTst, NULL);
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(_flagtest(upst.upsstatus, stat_shutting)) retcode = SendUPSMsg(UPS_Cancel, NULL);
if(0 != retcode) break;
StopPoll = FALSE;
retcode = waitformessage(hab, 0, pups);
break;
case cmd_shutdown:
StopPoll = TRUE;
if(0 != (retcode = waitformessage(hab, 0, NULL))) break;
if(0 != (retcode = SendUPSMsg(UPS_Shut, mp1))) break;
StopPoll = FALSE;
retcode = waitformessage(hab, 0, pups);
break;
case cmd_exit:
retcode = CloseComPort();
return retcode;
case cmd_poll:
retcode = waitformessage(hab, 0, pups);
pups->infostr = infostr;
break;
default:
retcode = waitformessage(hab, 0, NULL);
break;
}
StopPoll = FALSE;
return retcode;
}
/****************************************************************************
* Opens com port
*
* \param comPort Com port to be opened.
* \param baud Baud rate
* \param
* \return Opens the com port
*****************************************************************************/
void CComPort::OpenComPort(unsigned int comPort, unsigned int baud)
{
CString buff;
DWORD bytes_read = 0; // Number of bytes read from port
DWORD bytes_written = 0; // Number of bytes written to the port
int bStatus;
DCB comSettings; // Contains various port settings
COMMTIMEOUTS CommTimeouts;
if(comPortHandle)
{
// If com port is already open, close it.
CloseComPort();
}
buff = comPortStrng[comPort];
// Open COM port
if ((comPortHandle = CreateFile(buff, // open com5:
GENERIC_READ | GENERIC_WRITE, // for reading and writing
0, // exclusive access
NULL, // no security attributes
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL)) == INVALID_HANDLE_VALUE)
{
// error processing code goes here
MessageBox(NULL, "Not able to open com port!", NULL, 0);
comPortHandle = NULL;
}
else
{
// Set timeouts in milliseconds
CommTimeouts.ReadIntervalTimeout = 0;
CommTimeouts.ReadTotalTimeoutMultiplier = 0;
CommTimeouts.ReadTotalTimeoutConstant = 5; // Read time out 5ms.
CommTimeouts.WriteTotalTimeoutMultiplier = 1;
CommTimeouts.WriteTotalTimeoutConstant = 500; // Write time out 500ms.
(void)SetCommTimeouts(comPortHandle,&CommTimeouts);
// Set Port parameters.
// Make a call to GetCommState() first in order to fill
// the comSettings structure with all the necessary values.
// Then change the ones you want and call SetCommState().
GetCommState(comPortHandle, &comSettings);
baud = baudTable[baud];
comSettings.BaudRate = baud;
comSettings.StopBits = ONESTOPBIT;
comSettings.ByteSize = 8;
comSettings.Parity = NOPARITY; // No Parity
comSettings.fParity = FALSE;
comSettings.fRtsControl = RTS_CONTROL_ENABLE; // Keep the RTS ON, to trigger bootloader enter bootload mode.
bStatus = SetCommState(comPortHandle, &comSettings);
if (bStatus == 0)
{
// error processing code goes here
MessageBox(NULL, "Error in setting the COM port!", NULL, 0);
CloseComPort();
}
}
}
/* Destructor */
Instek8261Serial::~Instek8261Serial(void) {
CloseComPort();
}