int VPN_close(int netmode)
{
#if (_CONFIG_VPN_MODULE != 0)
int ret=0;
system("../l2tp_end");
while(1)
{
if (netmode == NET_LAN) //遗留了一处ifconfig判断，待改进
ret = system("ifconfig ppp0");
else
ret = system("ifconfig ppp1");
prn_log2("ret = %d", ret);
if (ret != 0)
{
system("killall xl2tpd");
CommonSleep(1000);
break;
}
CommonSleep(1000);
}
return VPN_SUCCESS;
#else
return VPN_SUCCESS;
#endif
}
static int wmmp_checkMonitorPlatform(void)
{
int rc;
int status;
int retries;
int maxretries=5;
//check login status
for(retries=0;retries<maxretries;retries++)
{
DEBUG_PRINTF("retries: %d\n",retries);
rc = wmmp_checkWmmpStatus(&status);
if(rc != 0)
{
DEBUG_PRINTF("WMMP get response error: %x\n",rc);
goto ExitProcessing;
}
if(status == 500)
{
DEBUG_PRINTF("WMMP ready for operation \n");
break;
}
else if(status == 732)
{
DEBUG_PRINTF("Alarmed!!!,reset the alarm status\n");
modem_sendCmd("AT$M2MALMRST=1234");
rc = modem_waitFor(MODEM_OK_STR,20);
if( rc != 0 )
{
DEBUG_PRINTF("Error: modem init\n");
goto ExitProcessing;
}
CommonSleep(10000);
}
else
{
DEBUG_PRINTF("Status = %d\n,sleep and retries",status);
// CommonSleep (5000);
CommonSleep (15000);
}
}
//exceed max retries ,reset the modem application
if (retries == maxretries)
{
DEBUG_PRINTF(("Failed,reset the module\n"));
modem_sendCmd("AT+CFUN=1");
rc = modem_waitFor("OK",10);
if(rc != 0)
{
DEBUG_PRINTF("WMMP get response error: %x\n",rc);
goto ExitProcessing;
}
rc = MODEM_ERROR_NUM(MODEM_ERROR_WMMP,ERROR_WMMP_NOT_READY);
goto ExitProcessing;
}
ExitProcessing:
return rc;
}
int CNetManager::autoDialProc(string &strErr)
{
int ret=0;
INT32 autoDialType=0;
CNetConnection *pnet=NULL;
CNetDBWork::loadAutoDialType(&autoDialType, strErr);
DBG_PRINT(("autoDialType = %d", autoDialType));
if (autoDialType <= 1)
{
pnet = g_netManager->GetConnectionHandle();
ret = pnet->performConnect(strErr);
if (ret != NET_SUCCESS)
{
return ret;
}
}
if (autoDialType == 0)
{
CommonSleep(1500);
pnet = g_netManager->GetConnectionHandleL2();
ret = pnet->performConnect(strErr);
if (ret != NET_SUCCESS)
{
return ret;
}
}
return NET_SUCCESS;
}
int InitPara(string &strErr)
{
DBG_PRINT(("==============InitPara Begin================"));
if(g_initParaFlag == 0)
{
CDB *m_db = CDB::GetInstance();
m_db->Open();
m_db->Init();
CommonSleep(300);
UINT8 index;
for(index = 0; index<DET_ARRAY_LEN; index++)
{
s_DetArray[index] = new CInvDet;
//DBG_PRINT(("s_DetArray[%d] = %x", index, s_DetArray[index]));
DBG_ASSERT_EXIT((s_DetArray[index] != NULL), (" s_DetArray[index] == NULL!"));
}
g_globalArgLib = CGlobalArgLib::GetInstance();
g_gNetArg = CGlobalNetArg::GetInstance();
g_globalArgLib->InitGlobalArg();
INT8 tmpbuf[64];
memset(tmpbuf, 0, sizeof(tmpbuf));
sprintf(tmpbuf, "%u", g_globalArgLib->m_corpInfo->m_Kpjhm);
g_gNetArg->InitGlobalNetArg(g_globalArgLib->m_corpInfo->m_Nsrsbh, "", g_globalArgLib->m_strHashNo, tmpbuf, g_globalArgLib->m_corpInfo->m_Jspsbh, "");
g_gNetArg->SetZskl(g_globalArgLib->m_strZskl);
g_initParaFlag = 1;
}
DBG_PRINT(("==============InitPara End================"));
}
/**!
@parem s_APNtag : 0002
@parem s_APNvalue : APN接入点
@ 此函数应该没用，APN模式下的接入点设置是修改的标准拨号脚本。zl
*/
int wmmp_setAPN(char *s_APNtag, const char *s_APNvalue)
{
#if (_CONFIG_M2M_MODULE != 0)
char buf[256];
char ctrlz[1]={0x1A};
int rc;
//确认已登录M2M平台
DEBUG_PRINTF("Send cmd...\n");
modem_sendCmd("AT$M2MALMRST=1234");
CommonSleep(20);//20ms
printf("wmmp_setAPN\n");
//Enable parsing of TLV data.
modem_sendCmd("AT$M2MBHV=2,1");
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAPN 1 WMMP get response error: %x\n",rc);
DEBUG_PRINTF("wmmp_setAPN 1, rc = %d\n", rc);
goto ExitProcessing;
}
//write TLV
modem_sendCmd("AT$M2MCFG=1");
sleep(1);
rc = modem_waitFor(">",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAPN 2 WMMP get response error: %x\n",rc);
DEBUG_PRINTF("wmmp_setAPN 2, rc = %d\n", rc);
goto ExitProcessing;
}
//write tag value
sprintf(buf,"%s,%s",s_APNtag,s_APNvalue);
DEBUG_PRINTF("Set Value: %s\n",buf);
modem_write( buf, strlen(buf) );
modem_write( ctrlz, 1 );
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAppServer-3 WMMP get response error: %x\n",rc);
DEBUG_PRINTF("wmmp_setAppServer 3, rc = %d\n", rc);
goto ExitProcessing;
}
// printf("wmmp_setAppServer SUCCESS\n", rc);
ExitProcessing:
return rc;
#else
return 0;
#endif
}
int VPN_connent(const char *ip, const char *userName, const char* passwd)
{
#if (_CONFIG_VPN_MODULE != 0)
int ret=0;
prn_log("enter VPN_Connet");
if((ret=setLocalVar(ip,userName,passwd))!=VPN_SUCCESS)
{
prn_log2("ret = %d", ret);
return ret;
}
prn_log("execute xl2tpd");
#if (_DBG_PRINT_TRANSDATA == 0)
ret = system("../xl2tpd &");
#else
ret = system("../xl2tpd -D &");
#endif
if(ret != 0)
{
return VPN_RUN_XL2TPD_ER;
}
CommonSleep(2000);
prn_log("execute l2tp");
ret = system("../l2tp");
if(ret != 0)
{
return VPN_RUN_L2TP_ER;
}
CommonSleep(2000); //3000
prn_log("connectProc complate");
return VPN_SUCCESS;
#else
return VPN_SUCCESS;
#endif
}
void CDB::MutexLock(void)
{
#if PTHREAD_MUTEX_OPEN == 1
DBG_ASSERT_EXIT((m_rwcs != NULL), (" m_rwcs == NULL!"));
DBG_PRINT(("^^^^^^^^^^^countNum = %d^^^^^^^^", countNum));
while (pthread_mutex_trylock(m_rwcs) == EBUSY)
{
DBG_PRINT(("EBUSY"));
CommonSleep(1000);
}
countNum++;
DBG_PRINT(("^^^^^^^^^^^countNum = %d^^^^^^^^", countNum));
#endif
}
void CNetManager::NetTransMutexLock()
{
#if (_TRANS_THREAD_SUPPORT!=0)
DBG_PRINT(("^^^^^^^^^^^Net Mutex lock^^^^^^^^"));
while (pthread_mutex_trylock(&s_net_mutex) == EBUSY)
{
CommonSleep(800);
}
/* int ret = 0;
ret = pthread_mutex_lock(&s_net_mutex);
DBG_PRINT(("^^^^^^^^^^^Net Mutex lock^^^^^^^^"));
if (ret != 0)
{
DBG_PRINT(("===NET MUTEX LOCK %d====", ret));
}
*/
#endif
}
void CSelfTestMenu::OnButton13(int iEvent, unsigned char * pEventData, int iDataLen)
{
TDateTime curDate;
char chValue[64];
UINT8 nKeyTime = 1;
while(1)
{
curDate = TDateTime::CurrentDateTime();
memset(chValue, 0, sizeof(chValue));
sprintf(chValue, " %s", curDate.FormatString(YYYYMMDDHHMMSS).c_str());
CaProgressBar proBar(chValue);
proBar.Show();
if(CheckKey(nKeyTime)==SUCCESS)
{
break;
}
CommonSleep(1000);
}
this->ReFresh();
return;
}
int wmmp_setAppServer(int flowID, const char *server_ip, const char *port)
{
char buf[256];
char ctrlz[1]={0x1A};
int rc;
// 锁定中国移动网络，防止信号不稳定或与其他运营商有干扰时，
//中国移动网络的ID号被添加在SIM卡的FPLMN（禁止访问的网络）文件中,造成自动选择网络时被屏蔽。
//该命令与设置M2M模块IP无关，放这只是想省事，款机使用过程中只执行一次。
DEBUG_PRINTF("Send cmd...\n");
#if (SIMCOM == 1)
modem_sendCmd("at+cops=1,2,\"46000\""); //by yy 20110819
#else
modem_sendCmd("at+cops=1,2,46000;&w");
#endif
DEBUG_PRINTF("Wait response...\n");
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("锁定中国移动网络 WMMP get response error: %x\n",rc);
//printf("wmmp_setAppServer, rc = %d\n", rc);
goto ExitProcessing;
}
#if (SIMCOM == 1)
//add by yy 20110819
DEBUG_PRINTF("Send cmd at&w\n");
// printf("Send cmd at&w\n");
modem_sendCmd("at&w");
DEBUG_PRINTF("Wait response...\n");
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("锁定中国移动网络 WMMP get response error: %x\n",rc);
//printf("wmmp_setAppServer 1, rc = %d\n", rc);
goto ExitProcessing;
}
#endif
//Enable parsing of TLV data.
DEBUG_PRINTF("Send cmd...\n");
modem_sendCmd("AT$M2MBHV=2,1");
DEBUG_PRINTF("Wait response...\n");
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAppServer-1 WMMP get response error: %x\n",rc);
// printf("wmmp_setAppServer 1, rc = %d\n", rc);
goto ExitProcessing;
}
//确认已登录M2M平台
DEBUG_PRINTF("Send cmd...\n");
modem_sendCmd("AT$M2MALMRST=1234");
CommonSleep(20);//20ms
// printf("wmmp_setAppServer 1.1\n");
//write TLV
DEBUG_PRINTF("Send cmd...\n");
modem_sendCmd("AT$M2MCFG=1");
DEBUG_PRINTF("Wait response...\n");
rc = modem_waitFor(">",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAppServer-2 WMMP get response error: %x\n",rc);
// printf("wmmp_setAppServer 2, rc = %d\n", rc);
goto ExitProcessing;
}
//write tag value
sprintf(buf,"D00%X,4,\"tcp://%s:%s\"",(flowID+1),server_ip,port);
DEBUG_PRINTF("Set Value: %s\n",buf);
modem_write( buf, strlen(buf) );
modem_write( ctrlz, 1 );
rc = modem_waitFor("OK",WMMP_TIMEOUT);
if(rc != 0)
{
DEBUG_PRINTF("wmmp_setAppServer-3 WMMP get response error: %x\n",rc);
// printf("wmmp_setAppServer 3, rc = %d\n", rc);
goto ExitProcessing;
}
// printf("wmmp_setAppServer SUCCESS\n", rc);
ExitProcessing:
return rc;
}
INT32 CSaleBusinessFunc::InvoiceUpload(CYWXML_GY &ywxml_gy, string &strErr)
{
INT32 ret = SUCCESS;
UINT8 upFlag = 0;
UINT8 czlx = 0;
UINT32 fpzx = 1; //一次只上传一张发票
string strInvInfo("");
string strMxjgmw("");
UINT8 nCount = 0;
UINT32 nTime = 1000;
UINT32 nTimeCount = 5;
UINT8 xxlx = SKSBQTYXXCX_XXLX_FPSCJGHQ;
string strSksbxx("");
string slxlh("");
UINT8 errNetFlag=0;
//从金税盘获取上传发票信息
ret = g_pBusBase->FPSC_Business(ywxml_gy, czlx, fpzx, strInvInfo, strErr);
DBG_PRINT(("ret = %d", ret));
if( (ret == JSK_COMMON_ERR_NO) && (strErr == "所有发票都已上传!") )
{
DBG_PRINT(("here stop inv upload!"));
g_globalArg->m_pthreadFlag = 0;
return SUCCESS;
}
ret = g_pBusBase->ErrParse(ret, strErr);
if(ret != SUCCESS)
{
return ret;
}
while(1)
{
if(nCount >= MAX_ERR_NUM)
{
break;
}
if(errNetFlag >= MAX_NET_ERR_NUM)
{
#if BUSINESS_TYPE_MODE == BUSINESS_JSK_MODE
g_globalArgLib->m_pthreadFlag = 0;
#else
g_globalArg->m_pthreadFlag = 0;
#endif
break;
}
if(upFlag == 0)
{
//调用网络上传接口，上传发票信息
ret = g_pBusBase->NETFPSC_Business(ywxml_gy, strInvInfo, fpzx, slxlh, strErr);
DBG_PRINT(("ret = %d", ret));
if(ret < -255)
errNetFlag++;
ret = g_pBusBase->ErrParse(ret, strErr);
if(ret != SUCCESS)
{
nCount++;
CommonSleep(nCount*nTime);
continue;
}
CommonSleep(3*nTime);
errNetFlag = 0;
upFlag = 1;
nCount = 0;
}
else
{
ret = g_pBusBase->SKSBQTYXXCX_Business(ywxml_gy, xxlx, strSksbxx, strErr);
ret = g_pBusBase->ErrParse(ret, strErr);
if(ret != SUCCESS)
{
return FAILURE;
}
//获取上传结果密文
ret = g_pBusBase->FPSCJGHQ_Business(ywxml_gy, strSksbxx, strMxjgmw, strErr);
if(ret < -255)
errNetFlag++;
ret = g_pBusBase->ErrParse(ret, strErr);
if( ret != SUCCESS )
{
nCount++;
CommonSleep(nCount*nTimeCount*nTime);
continue;
}
errNetFlag = 0;
//将上传结果密文更新到金税盘
ret = g_pBusBase->FPGX_Business(ywxml_gy, strMxjgmw, strErr);
ret = g_pBusBase->ErrParse(ret, strErr);
break;
}
CommonSleep(nTime);
}
return ret;
}
UINT8 SimpleAutoIssue(UINT8 &nIfInvSum)
{
// INT32 nKey = 0x0;
UINT8 nKeyTime = 0;
UINT32 nDate;
UINT8 nVolNum = 0;//发票卷数
UINT32 nInvNo = 0;
UINT32 nCurrentInvNo = 0;
INT8 chValue[256];
string strInfo;
memset((void*)chValue, 0, sizeof(chValue));
SaleData saleInfo;
CaProgressBar proBar("");
UINT8 ret;
for(;;)
{
//超过开票截止日期，停止开票
nDate = TDateTime::CurrentDateTime().FormatInt(YYYYMMDD);
DBG_PRINT(("for后 nDate = %u", nDate));
DBG_PRINT(("for后 g_globalArg->m_curInvVol->m_remain = %u", g_globalArg->m_curInvVol->m_remain));
// if (nDate>g_globalArg->m_corpInfo->m_ieDate)
// {
// CaMsgBox::ShowMsg("超过开票截止日期\n请立即申报!");
// return FAILURE;
// }
// if (1 == g_globalArg->m_declareLimitFlag)
// {
// CaMsgBox::ShowMsg("申报期超限,请立即申报");
// return FAILURE;
// }
//连续按两次确认键，则退出开票程序
if(CheckKey2(nKeyTime)==SUCCESS)
{
return SUCCESS;
}
DBG_PRINT(("开始自动开票"));
// if(g_globalArg->m_curInvVol->m_remain != 0)
// {
// nCurrentInvNo = g_globalArg->m_curInvVol->m_ieno + 1 -
// g_globalArg->m_curInvVol->m_remain;
//判断是否滚动，若要滚动，显示消息框
// if(IfInvHeadRoll()!=SUCCESS)
// {
// return FAILURE;
// }
// if(IfInvSumRoll()!=SUCCESS)
// {
// return FAILURE;
// }
// if(IfRtInvRoll()!=SUCCESS)
// {
// return FAILURE;
// }
// if (g_globalArg->m_curInvVol->m_remain == 2)
// {
// DBG_PRINT(("自动开红票"));
// if ((ret = SimpleMakeReturnInv(saleInfo)) != SUCCESS)
// {
// if (ret==DB_FULL)
// {
// CaMsgBox::ShowMsg("存储空间已满，无法开票 请尽快申报!");
// }
// else if (HAVE_ROLLED==ret)
// {
// CaMsgBox::ShowMsg("滚动完毕!");
// }
// else
// {
// CaMsgBox::ShowMsg("开红票失败!");
// }
// return FAILURE;
// }
// }
// else if (g_globalArg->m_curInvVol->m_remain == 1)
// {
// DBG_PRINT(("自动开废票"));
// if ((ret = SimpleMakeWasteInv(saleInfo)) != SUCCESS)
// {
// if (ret==DB_FULL)
// {
// CaMsgBox::ShowMsg("存储空间已满，无法开票 请尽快申报!");
// }
// else if (HAVE_ROLLED==ret)
// {
// CaMsgBox::ShowMsg("滚动完毕!");
// }
// else
// {
// CaMsgBox::ShowMsg("开废票失败!");
// }
// return FAILURE;
// }
// }
// else
// {
// while (g_globalArg->m_InvServNum > 0)
// {
// CommonSleep(1000);
// }
CommonSleep(1000);
DBG_PRINT(("自动开正票"));
string strErr("");
if ((ret = SimpleMakeNormalInv(saleInfo,strErr))!= SUCCESS)
{
DBG_PRINT(("ret= %u",ret));
if (ret==DB_FULL)
{
CaMsgBox::ShowMsg("存储空间已满，无法开票 请尽快申报!");
}
else if (HAVE_ROLLED==ret)
{
CaMsgBox::ShowMsg("滚动完毕!");
}
else if(INV_LIB_ERR == ret)
{
CaMsgBox::ShowMsg(g_globalArg->m_strMsg);
}
else
{
CaMsgBox::ShowMsg(strErr);
}
return FAILURE;
}
// }
//----销售相关变量复位
saleInfo.InitSaleData(1); //销售信息初始化
saleInfo.InitInvHead(); //单张发票信息初始化
//memset((void*)chValue, 0, sizeof(chValue));
nCurrentInvNo++;
sprintf(chValue, "自动开票: %u号",nCurrentInvNo);
proBar.SetText(chValue);
proBar.ReFresh();
/*
}
else
{
//卷汇总，查询发票卷，并导入。若无发票卷，则报错并返回
if (GetInvNo(saleInfo, nInvNo) != SUCCESS)
{
return FAILURE;
}
if(nVolNum < 1)
{
nVolNum++;
continue;
}
nVolNum = 0;
//修改系统时间到第二天
// TDateTime dateTime(nDate, 80000);
// dateTime++;
// if (!TDateTime::SetCurrentDateTime(dateTime))
// {
// CaMsgBox::ShowMsg("修改日期时间错误!");
// return FAILURE;
// }
// UINT32 nTestDate = TDateTime::CurrentDateTime().FormatInt(YYYYMMDD);
// DBG_PRINT(("延迟后 nTestDate = %u", nTestDate));
//日汇总
// INT32 errorcode = 0;
// INT8 charValue[128];
// memset((void*)charValue, 0, sizeof(charValue));
// if ((errorcode = g_globalArg->CheckDaySum(0)) != SUCCESS)
// {
// sprintf(charValue, "日交易汇总错误：%02x", errorcode);
// CaMsgBox::ShowMsg(charValue);
// return FAILURE;
// }
}*/
}
}
void CWirelessViewWin::DoActive()
{
INT32 rc=0;
int rssi=0;
int ber=0;
UINT8 key=0;
INT8 title[OBJ_TITLE_MAX_LEN + 1];
INT32 titleLen=0;
INT32 mode = g_netManager->GetConnectionMode();
CNetConnection *p = (CNetConnection *)g_netManager->GetConnectionHandle();
g_netManager->NetTransMutexLock();
do
{
if( key = ReadKeypad() )
{
if (key == ESC_KEY)
{
break;
}
else if ( key==HELP_KEY && (mode==NET_M2M_WMMP || mode==NET_M2M_APN) )
{
M2Minfo info;
memset((void *)&info, 0, sizeof(M2Minfo));
((M2MCommon *)p)->getModlueInfo(&info);
sprintf(title, "IMEI:%s", info.IMEI);
CaMsgBox::ShowMsg(title);
}
}
rc = p->getCSQ(&rssi, &ber);
DBG_PRINT(("rc = %d", rc))
if (rc != 0)
{
strcpy(title, "信号强度(0～31)：监测失败");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel1->SetTitle(title, titleLen / CHAR_W);
strcpy(title, "信 号 等 级： 监测失败");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel2->SetTitle(title, titleLen / CHAR_W);
}
else
{
DBG_PRINT(("CSQ: %d, %d",rssi,ber));
if (rssi==99 /*|| ber==99*/) //change for 3g. zl
{
strcpy(title, "信号强度(0～31)：无信号");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel1->SetTitle(title, titleLen / CHAR_W);
strcpy(title, "信 号 等 级： 无信号");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel2->SetTitle(title, titleLen / CHAR_W);
}
else
{
if (rssi>20)
{
sprintf(title, "信号强度(0～31)：%d", rssi);
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel1->SetTitle(title, titleLen / CHAR_W);
strcpy(title, "信 号 等 级： 强");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel2->SetTitle(title, titleLen / CHAR_W);
}
else if (rssi>10)
{
sprintf(title, "信号强度(0～31)：%d", rssi);
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel1->SetTitle(title, titleLen / CHAR_W);
strcpy(title, "信 号 等 级： 中");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel2->SetTitle(title, titleLen / CHAR_W);
}
else
{
sprintf(title, "信号强度(0～31)：%d", rssi);
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel1->SetTitle(title, titleLen / CHAR_W);
strcpy(title, "信 号 等 级： 弱");
titleLen = strlen(title) * CHAR_W + 1;
m_pLabel2->SetTitle(title, titleLen / CHAR_W);
}
}
}
this->ReFresh();
CommonSleep(800);
}while (1);
g_netManager->NetTransMutexUnlock();
ChangeWin(NETWORK_SET_MENU);
return;
}
