/***********************************************************************
*
* pop3_do()
*
* This function is registered as 'curl_do' function. It decodes the path
* parts etc as a wrapper to the actual DO function (pop3_perform).
*
* The input argument is already checked for validity.
*/
static CURLcode pop3_do(struct connectdata *conn, bool *done)
{
CURLcode retcode = CURLE_OK;
*done = FALSE; /* default to false */
/*
Since connections can be re-used between SessionHandles, this might be a
connection already existing but on a fresh SessionHandle struct so we must
make sure we have a good 'struct POP3' to play with. For new connections,
the struct POP3 is allocated and setup in the pop3_connect() function.
*/
Curl_reset_reqproto(conn);
retcode = pop3_init(conn);
if(retcode)
return retcode;
retcode = pop3_parse_url_path(conn);
if(retcode)
return retcode;
retcode = pop3_regular_transfer(conn, done);
return retcode;
}
/***********************************************************************
*
* pop3_do()
*
* This function is registered as 'curl_do' function. It decodes the path
* parts etc as a wrapper to the actual DO function (pop3_perform).
*
* The input argument is already checked for validity.
*/
static CURLcode pop3_do(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
*done = FALSE; /* default to false */
/* Since connections can be re-used between SessionHandles, there might be a
connection already existing but on a fresh SessionHandle struct. As such
we make sure we have a good POP3 struct to play with. For new connections
the POP3 struct is allocated and setup in the pop3_connect() function. */
Curl_reset_reqproto(conn);
result = pop3_init(conn);
if(result)
return result;
/* Parse the URL path */
result = pop3_parse_url_path(conn);
if(result)
return result;
/* Parse the custom request */
result = pop3_parse_custom_request(conn);
if(result)
return result;
result = pop3_regular_transfer(conn, done);
return result;
}
/***********************************************************************
*
* smtp_connect()
*
* This function should do everything that is to be considered a part of
* the connection phase.
*
* The variable pointed to by 'done' will be TRUE if the protocol-layer
* connect phase is done when this function returns, or FALSE if not. When
* called as a part of the easy interface, it will always be TRUE.
*/
static CURLcode smtp_connect(struct connectdata *conn, bool *done)
{
CURLcode result;
struct smtp_conn *smtpc = &conn->proto.smtpc;
struct pingpong *pp = &smtpc->pp;
const char *path = conn->data->state.path;
char localhost[HOSTNAME_MAX + 1];
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = smtp_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on smtp */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
/* Initialise the response reader stuff */
Curl_pp_init(pp);
/* Set the default response time-out */
pp->response_time = RESP_TIMEOUT;
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
/* Calculate the path if necessary */
if(!*path) {
if(!Curl_gethostname(localhost, sizeof(localhost)))
path = localhost;
else
path = "localhost";
}
/* URL decode the path and use it as the domain in our EHLO */
result = Curl_urldecode(conn->data, path, 0, &smtpc->domain, NULL, TRUE);
if(result)
return result;
/* Start off waiting for the server greeting response */
state(conn, SMTP_SERVERGREET);
result = smtp_multi_statemach(conn, done);
return result;
}
/***********************************************************************
*
* imap_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode imap_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct imap_conn *imapc = &conn->proto.imapc;
struct SessionHandle *data=conn->data;
struct pingpong *pp = &imapc->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = imap_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on imap */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = imap_statemach_act;
pp->endofresp = imap_endofresp;
pp->conn = conn;
if((conn->handler->flags & PROTOPT_SSL) &&
data->state.used_interface != Curl_if_multi) {
/* IMAPS is simply imap with SSL for the control channel */
/* so perform the SSL initialization for this socket */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
/* Initialise the response reader stuff */
Curl_pp_init(pp);
/* Start off waiting for the server greeting response */
state(conn, IMAP_SERVERGREET);
/* Start off with an id of '*' */
imapc->idstr = "*";
if(data->state.used_interface == Curl_if_multi)
result = imap_multi_statemach(conn, done);
else {
result = imap_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}
/*
* pop3_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode pop3_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct pop3_conn *pop3c = &conn->proto.pop3c;
struct SessionHandle *data=conn->data;
struct pingpong *pp = &pop3c->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = pop3_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on pop3 */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = pop3_statemach_act;
pp->endofresp = pop3_endofresp;
pp->conn = conn;
if(conn->handler->flags & PROTOPT_SSL) {
/* BLOCKING */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
Curl_pp_init(pp); /* init the response reader stuff */
/* When we connect, we start in the state where we await the server greet
response */
state(conn, POP3_SERVERGREET);
if(data->state.used_interface == Curl_if_multi)
result = pop3_multi_statemach(conn, done);
else {
result = pop3_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}
/***********************************************************************
*
* smtp_do()
*
* This function is registered as 'curl_do' function. It decodes the path
* parts etc as a wrapper to the actual DO function (smtp_perform).
*
* The input argument is already checked for validity.
*/
static CURLcode smtp_do(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
*done = FALSE; /* default to false */
/* Since connections can be re-used between SessionHandles, there might be a
connection already existing but on a fresh SessionHandle struct. As such
we make sure we have a good SMTP struct to play with. For new connections
the SMTP struct is allocated and setup in the smtp_connect() function. */
Curl_reset_reqproto(conn);
result = smtp_init(conn);
if(result)
return result;
result = smtp_regular_transfer(conn, done);
return result;
}
/***********************************************************************
*
* pop3_connect()
*
* This function should do everything that is to be considered a part of the
* connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode pop3_connect(struct connectdata *conn, bool *done)
{
CURLcode result;
struct pop3_conn *pop3c = &conn->proto.pop3c;
struct pingpong *pp = &pop3c->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = pop3_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on pop3 */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = pop3_statemach_act;
pp->endofresp = pop3_endofresp;
pp->conn = conn;
if(conn->handler->flags & PROTOPT_SSL) {
/* POP3S is simply pop3 with SSL for the control channel */
/* so perform the SSL initialization for this socket */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
/* Initialise the response reader stuff */
Curl_pp_init(pp);
/* Start off waiting for the server greeting response */
state(conn, POP3_SERVERGREET);
result = pop3_multi_statemach(conn, done);
return result;
}
/***********************************************************************
*
* pop3_connect()
*
* This function should do everything that is to be considered a part of the
* connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode pop3_connect(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
struct pop3_conn *pop3c = &conn->proto.pop3c;
struct pingpong *pp = &pop3c->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
/* Initialise the POP3 layer */
result = pop3_init(conn);
if(result)
return result;
/* We always support persistent connections in POP3 */
conn->bits.close = FALSE;
/* Set the default response time-out */
pp->response_time = RESP_TIMEOUT;
pp->statemach_act = pop3_statemach_act;
pp->endofresp = pop3_endofresp;
pp->conn = conn;
/* Initialise the pingpong layer */
Curl_pp_init(pp);
/* Start off waiting for the server greeting response */
state(conn, POP3_SERVERGREET);
result = pop3_multi_statemach(conn, done);
return result;
}
/*
* pop3_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode pop3_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct pop3_conn *pop3c = &conn->proto.pop3c;
struct SessionHandle *data=conn->data;
struct pingpong *pp = &pop3c->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = pop3_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on pop3 */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = pop3_statemach_act;
pp->endofresp = pop3_endofresp;
pp->conn = conn;
if(conn->bits.tunnel_proxy && conn->bits.httpproxy) {
/* for POP3 over HTTP proxy */
struct HTTP http_proxy;
struct FTP *pop3_save;
/* BLOCKING */
/* We want "seamless" POP3 operations through HTTP proxy tunnel */
/* Curl_proxyCONNECT is based on a pointer to a struct HTTP at the member
* conn->proto.http; we want POP3 through HTTP and we have to change the
* member temporarily for connecting to the HTTP proxy. After
* Curl_proxyCONNECT we have to set back the member to the original struct
* POP3 pointer
*/
pop3_save = data->state.proto.pop3;
memset(&http_proxy, 0, sizeof(http_proxy));
data->state.proto.http = &http_proxy;
result = Curl_proxyCONNECT(conn, FIRSTSOCKET,
conn->host.name, conn->remote_port);
data->state.proto.pop3 = pop3_save;
if(CURLE_OK != result)
return result;
}
if(conn->handler->flags & PROTOPT_SSL) {
/* BLOCKING */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
Curl_pp_init(pp); /* init the response reader stuff */
/* When we connect, we start in the state where we await the server greet
response */
state(conn, POP3_SERVERGREET);
if(data->state.used_interface == Curl_if_multi)
result = pop3_multi_statemach(conn, done);
else {
result = pop3_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}
/*
* smtp_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode smtp_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct smtp_conn *smtpc = &conn->proto.smtpc;
struct SessionHandle *data=conn->data;
struct pingpong *pp=&smtpc->pp;
const char *path = conn->data->state.path;
int len;
char localhost[1024 + 1];
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = smtp_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistant connections on smtp */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_PROXY)
if(conn->bits.tunnel_proxy && conn->bits.httpproxy) {
/* for SMTP over HTTP proxy */
struct HTTP http_proxy;
struct FTP *smtp_save;
/* BLOCKING */
/* We want "seamless" SMTP operations through HTTP proxy tunnel */
/* Curl_proxyCONNECT is based on a pointer to a struct HTTP at the member
* conn->proto.http; we want SMTP through HTTP and we have to change the
* member temporarily for connecting to the HTTP proxy. After
* Curl_proxyCONNECT we have to set back the member to the original struct
* SMTP pointer
*/
smtp_save = data->state.proto.smtp;
memset(&http_proxy, 0, sizeof(http_proxy));
data->state.proto.http = &http_proxy;
result = Curl_proxyCONNECT(conn, FIRSTSOCKET,
conn->host.name, conn->remote_port);
data->state.proto.smtp = smtp_save;
if(CURLE_OK != result)
return result;
}
#endif /* !CURL_DISABLE_HTTP && !CURL_DISABLE_PROXY */
if(conn->protocol & PROT_SMTPS) {
/* BLOCKING */
/* SMTPS is simply smtp with SSL for the control channel */
/* now, perform the SSL initialization for this socket */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
Curl_pp_init(pp); /* init the response reader stuff */
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
if(!*path) {
if(!Curl_gethostname(localhost, sizeof localhost))
path = localhost;
else
path = "localhost";
}
/* url decode the path and use it as domain with EHLO */
smtpc->domain = curl_easy_unescape(conn->data, path, 0, &len);
if(!smtpc->domain)
return CURLE_OUT_OF_MEMORY;
/* When we connect, we start in the state where we await the server greeting
*/
state(conn, SMTP_SERVERGREET);
if(data->state.used_interface == Curl_if_multi)
result = smtp_multi_statemach(conn, done);
else {
result = smtp_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}
/*
* file_connect() gets called from Curl_protocol_connect() to allow us to
* do protocol-specific actions at connect-time. We emulate a
* connect-then-transfer protocol and "connect" to the file here
*/
static CURLcode file_connect(struct connectdata *conn, bool *done)
{
struct SessionHandle *data = conn->data;
char *real_path = curl_easy_unescape(data, data->state.path, 0, NULL);
struct FILEPROTO *file;
int fd;
#ifdef DOS_FILESYSTEM
int i;
char *actual_path;
#endif
if(!real_path)
return CURLE_OUT_OF_MEMORY;
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
if(!data->state.proto.file) {
file = calloc(sizeof(struct FILEPROTO), 1);
if(!file) {
free(real_path);
return CURLE_OUT_OF_MEMORY;
}
data->state.proto.file = file;
}
else {
/* file is not a protocol that can deal with "persistancy" */
file = data->state.proto.file;
Curl_safefree(file->freepath);
if(file->fd != -1)
close(file->fd);
file->path = NULL;
file->freepath = NULL;
file->fd = -1;
}
#ifdef DOS_FILESYSTEM
/* If the first character is a slash, and there's
something that looks like a drive at the beginning of
the path, skip the slash. If we remove the initial
slash in all cases, paths without drive letters end up
relative to the current directory which isn't how
browsers work.
Some browsers accept | instead of : as the drive letter
separator, so we do too.
On other platforms, we need the slash to indicate an
absolute pathname. On Windows, absolute paths start
with a drive letter.
*/
actual_path = real_path;
if((actual_path[0] == '/') &&
actual_path[1] &&
(actual_path[2] == ':' || actual_path[2] == '|'))
{
actual_path[2] = ':';
actual_path++;
}
/* change path separators from '/' to '\\' for DOS, Windows and OS/2 */
for (i=0; actual_path[i] != '\0'; ++i)
if(actual_path[i] == '/')
actual_path[i] = '\\';
fd = open_readonly(actual_path, O_RDONLY|O_BINARY); /* no CR/LF translation */
file->path = actual_path;
#else
fd = open_readonly(real_path, O_RDONLY);
file->path = real_path;
#endif
file->freepath = real_path; /* free this when done */
file->fd = fd;
if(!data->set.upload && (fd == -1)) {
failf(data, "Couldn't open file %s", data->state.path);
file_done(conn, CURLE_FILE_COULDNT_READ_FILE, FALSE);
return CURLE_FILE_COULDNT_READ_FILE;
}
*done = TRUE;
return CURLE_OK;
}
CURLcode Curl_rtsp(struct connectdata *conn, bool *done)
{
struct SessionHandle *data = conn->data;
CURLcode result=CURLE_OK;
Curl_RtspReq rtspreq = data->set.rtspreq;
struct RTSP *rtsp;
struct HTTP *http;
Curl_send_buffer *req_buffer;
curl_off_t postsize = 0; /* for ANNOUNCE and SET_PARAMETER */
curl_off_t putsize = 0; /* for ANNOUNCE and SET_PARAMETER */
const char *p_request = NULL;
const char *p_session_id = NULL;
const char *p_accept = NULL;
const char *p_accept_encoding = NULL;
const char *p_range = NULL;
const char *p_referrer = NULL;
const char *p_stream_uri = NULL;
const char *p_transport = NULL;
const char *p_uagent = NULL;
*done = TRUE;
Curl_reset_reqproto(conn);
if(!data->state.proto.rtsp) {
/* Only allocate this struct if we don't already have it! */
rtsp = calloc(1, sizeof(struct RTSP));
if(!rtsp)
return CURLE_OUT_OF_MEMORY;
data->state.proto.rtsp = rtsp;
}
else {
rtsp = data->state.proto.rtsp;
}
http = &(rtsp->http_wrapper);
/* Assert that no one has changed the RTSP struct in an evil way */
DEBUGASSERT((void *)http == (void *)rtsp);
rtsp->CSeq_sent = data->state.rtsp_next_client_CSeq;
rtsp->CSeq_recv = 0;
/* Setup the 'p_request' pointer to the proper p_request string
* Since all RTSP requests are included here, there is no need to
* support custom requests like HTTP.
**/
DEBUGASSERT((rtspreq > RTSPREQ_NONE && rtspreq < RTSPREQ_LAST));
data->set.opt_no_body = TRUE; /* most requests don't contain a body */
switch(rtspreq) {
case RTSPREQ_NONE:
failf(data, "Got invalid RTSP request: RTSPREQ_NONE");
return CURLE_BAD_FUNCTION_ARGUMENT;
case RTSPREQ_OPTIONS:
p_request = "OPTIONS";
break;
case RTSPREQ_DESCRIBE:
p_request = "DESCRIBE";
data->set.opt_no_body = FALSE;
break;
case RTSPREQ_ANNOUNCE:
p_request = "ANNOUNCE";
break;
case RTSPREQ_SETUP:
p_request = "SETUP";
break;
case RTSPREQ_PLAY:
p_request = "PLAY";
break;
case RTSPREQ_PAUSE:
p_request = "PAUSE";
break;
case RTSPREQ_TEARDOWN:
p_request = "TEARDOWN";
break;
case RTSPREQ_GET_PARAMETER:
/* GET_PARAMETER's no_body status is determined later */
p_request = "GET_PARAMETER";
break;
case RTSPREQ_SET_PARAMETER:
p_request = "SET_PARAMETER";
break;
case RTSPREQ_RECORD:
p_request = "RECORD";
break;
case RTSPREQ_RECEIVE:
p_request = "";
/* Treat interleaved RTP as body*/
data->set.opt_no_body = FALSE;
break;
case RTSPREQ_LAST:
failf(data, "Got invalid RTSP request: RTSPREQ_LAST");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
if(rtspreq == RTSPREQ_RECEIVE) {
Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
&http->readbytecount, -1, NULL);
return result;
}
p_session_id = data->set.str[STRING_RTSP_SESSION_ID];
if(!p_session_id &&
(rtspreq & ~(RTSPREQ_OPTIONS | RTSPREQ_DESCRIBE | RTSPREQ_SETUP))) {
failf(data, "Refusing to issue an RTSP request [%s] without a session ID.",
p_request ? p_request : "");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
/* TODO: auth? */
/* TODO: proxy? */
/* Stream URI. Default to server '*' if not specified */
if(data->set.str[STRING_RTSP_STREAM_URI]) {
p_stream_uri = data->set.str[STRING_RTSP_STREAM_URI];
}
else {
p_stream_uri = "*";
}
/* Transport Header for SETUP requests */
p_transport = Curl_checkheaders(data, "Transport:");
if(rtspreq == RTSPREQ_SETUP && !p_transport) {
/* New Transport: setting? */
if(data->set.str[STRING_RTSP_TRANSPORT]) {
Curl_safefree(conn->allocptr.rtsp_transport);
conn->allocptr.rtsp_transport =
aprintf("Transport: %s\r\n",
data->set.str[STRING_RTSP_TRANSPORT]);
if(!conn->allocptr.rtsp_transport)
return CURLE_OUT_OF_MEMORY;
}
else {
failf(data,
"Refusing to issue an RTSP SETUP without a Transport: header.");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
p_transport = conn->allocptr.rtsp_transport;
}
/* Accept Headers for DESCRIBE requests */
if(rtspreq == RTSPREQ_DESCRIBE) {
/* Accept Header */
p_accept = Curl_checkheaders(data, "Accept:")?
NULL:"Accept: application/sdp\r\n";
/* Accept-Encoding header */
if(!Curl_checkheaders(data, "Accept-Encoding:") &&
data->set.str[STRING_ENCODING]) {
Curl_safefree(conn->allocptr.accept_encoding);
conn->allocptr.accept_encoding =
aprintf("Accept-Encoding: %s\r\n", data->set.str[STRING_ENCODING]);
if(!conn->allocptr.accept_encoding)
return CURLE_OUT_OF_MEMORY;
p_accept_encoding = conn->allocptr.accept_encoding;
}
}
/* The User-Agent string might have been allocated in url.c already, because
it might have been used in the proxy connect, but if we have got a header
with the user-agent string specified, we erase the previously made string
here. */
if(Curl_checkheaders(data, "User-Agent:") && conn->allocptr.uagent) {
Curl_safefree(conn->allocptr.uagent);
conn->allocptr.uagent = NULL;
}
else if(!Curl_checkheaders(data, "User-Agent:") &&
data->set.str[STRING_USERAGENT]) {
p_uagent = conn->allocptr.uagent;
}
/* Referrer */
Curl_safefree(conn->allocptr.ref);
if(data->change.referer && !Curl_checkheaders(data, "Referer:"))
conn->allocptr.ref = aprintf("Referer: %s\r\n", data->change.referer);
else
conn->allocptr.ref = NULL;
p_referrer = conn->allocptr.ref;
/*
* Range Header
* Only applies to PLAY, PAUSE, RECORD
*
* Go ahead and use the Range stuff supplied for HTTP
*/
if(data->state.use_range &&
(rtspreq & (RTSPREQ_PLAY | RTSPREQ_PAUSE | RTSPREQ_RECORD))) {
/* Check to see if there is a range set in the custom headers */
if(!Curl_checkheaders(data, "Range:") && data->state.range) {
Curl_safefree(conn->allocptr.rangeline);
conn->allocptr.rangeline = aprintf("Range: %s\r\n", data->state.range);
p_range = conn->allocptr.rangeline;
}
}
/*
* Sanity check the custom headers
*/
if(Curl_checkheaders(data, "CSeq:")) {
failf(data, "CSeq cannot be set as a custom header.");
return CURLE_RTSP_CSEQ_ERROR;
}
if(Curl_checkheaders(data, "Session:")) {
failf(data, "Session ID cannot be set as a custom header.");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
/* Initialize a dynamic send buffer */
req_buffer = Curl_add_buffer_init();
if(!req_buffer)
return CURLE_OUT_OF_MEMORY;
result =
Curl_add_bufferf(req_buffer,
"%s %s RTSP/1.0\r\n" /* Request Stream-URI RTSP/1.0 */
"CSeq: %ld\r\n", /* CSeq */
(p_request ? p_request : ""), p_stream_uri,
rtsp->CSeq_sent);
if(result)
return result;
/*
* Rather than do a normal alloc line, keep the session_id unformatted
* to make comparison easier
*/
if(p_session_id) {
result = Curl_add_bufferf(req_buffer, "Session: %s\r\n", p_session_id);
if(result)
return result;
}
/*
* Shared HTTP-like options
*/
result = Curl_add_bufferf(req_buffer,
"%s" /* transport */
"%s" /* accept */
"%s" /* accept-encoding */
"%s" /* range */
"%s" /* referrer */
"%s" /* user-agent */
,
p_transport ? p_transport : "",
p_accept ? p_accept : "",
p_accept_encoding ? p_accept_encoding : "",
p_range ? p_range : "",
p_referrer ? p_referrer : "",
p_uagent ? p_uagent : "");
if(result)
return result;
if((rtspreq == RTSPREQ_SETUP) || (rtspreq == RTSPREQ_DESCRIBE)) {
result = Curl_add_timecondition(data, req_buffer);
if(result)
return result;
}
result = Curl_add_custom_headers(conn, req_buffer);
if(result)
return result;
if(rtspreq == RTSPREQ_ANNOUNCE ||
rtspreq == RTSPREQ_SET_PARAMETER ||
rtspreq == RTSPREQ_GET_PARAMETER) {
if(data->set.upload) {
putsize = data->set.infilesize;
data->set.httpreq = HTTPREQ_PUT;
}
else {
postsize = (data->set.postfieldsize != -1)?
data->set.postfieldsize:
(data->set.postfields? (curl_off_t)strlen(data->set.postfields):0);
data->set.httpreq = HTTPREQ_POST;
}
if(putsize > 0 || postsize > 0) {
/* As stated in the http comments, it is probably not wise to
* actually set a custom Content-Length in the headers */
if(!Curl_checkheaders(data, "Content-Length:")) {
result = Curl_add_bufferf(req_buffer,
"Content-Length: %" FORMAT_OFF_T"\r\n",
(data->set.upload ? putsize : postsize));
if(result)
return result;
}
if(rtspreq == RTSPREQ_SET_PARAMETER ||
rtspreq == RTSPREQ_GET_PARAMETER) {
if(!Curl_checkheaders(data, "Content-Type:")) {
result = Curl_add_bufferf(req_buffer,
"Content-Type: text/parameters\r\n");
if(result)
return result;
}
}
if(rtspreq == RTSPREQ_ANNOUNCE) {
if(!Curl_checkheaders(data, "Content-Type:")) {
result = Curl_add_bufferf(req_buffer,
"Content-Type: application/sdp\r\n");
if(result)
return result;
}
}
data->state.expect100header = FALSE; /* RTSP posts are simple/small */
} else if(rtspreq == RTSPREQ_GET_PARAMETER) {
/* Check for an empty GET_PARAMETER (heartbeat) request */
data->set.httpreq = HTTPREQ_HEAD;
data->set.opt_no_body = TRUE;
}
}
/* RTSP never allows chunked transfer */
data->req.forbidchunk = TRUE;
/* Finish the request buffer */
result = Curl_add_buffer(req_buffer, "\r\n", 2);
if(result)
return result;
if(postsize > 0) {
result = Curl_add_buffer(req_buffer, data->set.postfields,
(size_t)postsize);
if(result)
return result;
}
/* issue the request */
result = Curl_add_buffer_send(req_buffer, conn,
&data->info.request_size, 0, FIRSTSOCKET);
if(result) {
failf(data, "Failed sending RTSP request");
return result;
}
Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount,
putsize?FIRSTSOCKET:-1,
putsize?&http->writebytecount:NULL);
/* Increment the CSeq on success */
data->state.rtsp_next_client_CSeq++;
if(http->writebytecount) {
/* if a request-body has been sent off, we make sure this progress is
noted properly */
Curl_pgrsSetUploadCounter(data, http->writebytecount);
if(Curl_pgrsUpdate(conn))
result = CURLE_ABORTED_BY_CALLBACK;
}
return result;
}
/*
* imap_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable 'done' points to will be TRUE if the protocol-layer connect
* phase is done when this function returns, or FALSE is not. When called as
* a part of the easy interface, it will always be TRUE.
*/
static CURLcode imap_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct imap_conn *imapc = &conn->proto.imapc;
struct SessionHandle *data=conn->data;
struct pingpong *pp = &imapc->pp;
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = imap_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistant connections on imap */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = imap_statemach_act;
pp->endofresp = imap_endofresp;
pp->conn = conn;
#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_PROXY)
if(conn->bits.tunnel_proxy && conn->bits.httpproxy) {
/* for IMAP over HTTP proxy */
struct HTTP http_proxy;
struct FTP *imap_save;
/* BLOCKING */
/* We want "seamless" IMAP operations through HTTP proxy tunnel */
/* Curl_proxyCONNECT is based on a pointer to a struct HTTP at the member
* conn->proto.http; we want IMAP through HTTP and we have to change the
* member temporarily for connecting to the HTTP proxy. After
* Curl_proxyCONNECT we have to set back the member to the original struct
* IMAP pointer
*/
imap_save = data->state.proto.imap;
memset(&http_proxy, 0, sizeof(http_proxy));
data->state.proto.http = &http_proxy;
result = Curl_proxyCONNECT(conn, FIRSTSOCKET,
conn->host.name, conn->remote_port);
data->state.proto.imap = imap_save;
if(CURLE_OK != result)
return result;
}
#endif /* !CURL_DISABLE_HTTP && !CURL_DISABLE_PROXY */
if(conn->protocol & PROT_IMAPS) {
/* BLOCKING */
/* IMAPS is simply imap with SSL for the control channel */
/* now, perform the SSL initialization for this socket */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
Curl_pp_init(pp); /* init generic pingpong data */
/* When we connect, we start in the state where we await the server greeting
response */
state(conn, IMAP_SERVERGREET);
imapc->idstr = "*"; /* we start off waiting for a '*' response */
if(data->state.used_interface == Curl_if_multi)
result = imap_multi_statemach(conn, done);
else {
result = imap_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}
/*
* smtp_connect() should do everything that is to be considered a part of
* the connection phase.
*
* The variable pointed to by 'done' will be TRUE if the protocol-layer
* connect phase is done when this function returns, or FALSE if not. When
* called as a part of the easy interface, it will always be TRUE.
*/
static CURLcode smtp_connect(struct connectdata *conn,
bool *done) /* see description above */
{
CURLcode result;
struct smtp_conn *smtpc = &conn->proto.smtpc;
struct SessionHandle *data = conn->data;
struct pingpong *pp = &smtpc->pp;
const char *path = conn->data->state.path;
char localhost[HOSTNAME_MAX + 1];
*done = FALSE; /* default to not done yet */
/* If there already is a protocol-specific struct allocated for this
sessionhandle, deal with it */
Curl_reset_reqproto(conn);
result = smtp_init(conn);
if(CURLE_OK != result)
return result;
/* We always support persistent connections on smtp */
conn->bits.close = FALSE;
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
if((conn->handler->protocol & CURLPROTO_SMTPS) &&
data->state.used_interface != Curl_if_multi) {
/* SMTPS is simply smtp with SSL for the control channel */
/* now, perform the SSL initialization for this socket */
result = Curl_ssl_connect(conn, FIRSTSOCKET);
if(result)
return result;
}
Curl_pp_init(pp); /* init the response reader stuff */
pp->response_time = RESP_TIMEOUT; /* set default response time-out */
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
if(!*path) {
if(!Curl_gethostname(localhost, sizeof(localhost)))
path = localhost;
else
path = "localhost";
}
/* Url decode the path and use it as the domain in our EHLO */
result = Curl_urldecode(conn->data, path, 0, &smtpc->domain, NULL, TRUE);
if(result)
return result;
/* Set the state as we are waiting the server greeting */
state(conn, SMTP_SERVERGREET);
if(data->state.used_interface == Curl_if_multi)
result = smtp_multi_statemach(conn, done);
else {
result = smtp_easy_statemach(conn);
if(!result)
*done = TRUE;
}
return result;
}