/*******************************************************************************
* Function Name: IasEventHandler
********************************************************************************
*
* Summary:
* This is an event callback function to receive events from the BLE Component,
* which are specific to Immediate Alert Service.
*
* Parameters:
* uint8 event: Write Command event from the CYBLE component.
* void* eventParams: A structure instance of CYBLE_GATT_HANDLE_VALUE_PAIR_T
* type.
*
* Return:
* None
*
*******************************************************************************/
void MIDIEventHandler(uint32 event, void *eventParam)
{
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
CYBLE_GATT_HANDLE_VALUE_PAIR_T midiNotificationCccdHandle;
uint8 midiCccdUpdate = 0x01;
switch(event)
{
case CYBLE_EVT_GATTS_WRITE_REQ:
/* This event is received when iOS device sends a Write command on an Attribute */
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
/* When this event is triggered, the peripheral has received a write command on the custom characteristic */
/* Check if command is for correct attribute and update the flag for sending Notifications */
if(CYBLE_MIDI_SERVICE_MIDI_IO_CHARATERISTIC_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE == wrReqParam->handleValPair.attrHandle)
{
/* Extract the Write value sent by the Client for CapSense Slider CCCD */
enableMidi = wrReqParam->handleValPair.value.val[CYBLE_MIDI_SERVICE_MIDI_IO_CHARATERISTIC_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX];
/* Update CCCD handle with notification status data*/
midiNotificationCccdHandle.attrHandle = CYBLE_MIDI_SERVICE_MIDI_IO_CHARATERISTIC_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
midiNotificationCccdHandle.value.val = &midiCccdUpdate;
midiNotificationCccdHandle.value.len = sizeof(midiCccdUpdate);
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&midiNotificationCccdHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_LOCALLY_INITIATED);
}
CyBle_GattsWriteRsp(cyBle_connHandle);
break;
case CYBLE_EVT_GATTS_WRITE_CMD_REQ:
ServiceMidiOutData();
break;
}
}
void AppCallBack(uint32 event, void *eventParam)
{
uint8 i;
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
switch (event)
{
case CYBLE_EVT_STACK_ON:
/* start advertising */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult == CYBLE_ERROR_OK)
{
#ifdef LED_INDICATION
ADV_LED_ON();
#endif /* LED_INDICATION */
}
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
sendNotifications = 0;
#ifdef ENABLE_I2C_ONLY_WHEN_CONNECTED
/* Stop I2C Slave operation */
I2C_Stop();
#endif
#ifdef LED_INDICATION
/* Indicate disconnect event to user */
DISCON_LED_ON();
CyDelay(3000);
#endif /* LED_INDICATION */
/* start advertising */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult == CYBLE_ERROR_OK)
{
#ifdef LED_INDICATION
ADV_LED_ON();
#endif /* LED_INDICATION */
}
break;
case CYBLE_EVT_GATT_CONNECT_IND:
#ifdef LED_INDICATION
CONNECT_LED_ON();
#endif /* LED_INDICATION */
#ifdef ENABLE_I2C_ONLY_WHEN_CONNECTED
/* Start I2C Slave operation */
I2C_Start();
/* Initialize I2C write buffer */
I2C_I2CSlaveInitWriteBuf((uint8 *) wrBuf, I2C_WRITE_BUFFER_SIZE);
/* Initialize I2C read buffer */
I2C_I2CSlaveInitReadBuf((uint8 *) rdBuf, I2C_READ_BUFFER_SIZE);
#endif
break;
/* Client may do Write Value or Write Value without Response. Handle both */
case CYBLE_EVT_GATTS_WRITE_REQ:
case CYBLE_EVT_GATTS_WRITE_CMD_REQ:
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
/* Handling Notification Enable */
if(wrReqParam->handleValPair.attrHandle == CYBLE_I2C_READ_I2C_READ_DATA_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
CYBLE_GATT_HANDLE_VALUE_PAIR_T I2CNotificationCCDHandle;
uint8 I2CCCDValue[2];
/* Extract CCCD Notification enable flag */
sendNotifications = wrReqParam->handleValPair.value.val[0];
/* Write the present I2C notification status to the local variable */
I2CCCDValue[0] = sendNotifications;
I2CCCDValue[1] = 0x00;
/* Update CCCD handle with notification status data*/
I2CNotificationCCDHandle.attrHandle = CYBLE_I2C_READ_I2C_READ_DATA_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
I2CNotificationCCDHandle.value.val = I2CCCDValue;
I2CNotificationCCDHandle.value.len = 2;
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&I2CNotificationCCDHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_LOCALLY_INITIATED);
}
/* Handling Write data from Client */
else if(wrReqParam->handleValPair.attrHandle == CYBLE_I2C_WRITE_I2C_WRITE_DATA_CHAR_HANDLE)
{
/* Turn off I2C interrupt before updating read registers */
I2C_DisableInt();
/*The data received from I2C client is extracted */
for(i=0;i<(wrReqParam->handleValPair.value.len);i++)
rdBuf[i] = wrReqParam->handleValPair.value.val[i];
/* Turn on I2C interrupt after updating read registers */
I2C_EnableInt();
}
if (event == CYBLE_EVT_GATTS_WRITE_REQ)
{
CyBle_GattsWriteRsp(cyBle_connHandle);
}
break;
default:
break;
}
}
void AppCallBack(uint32 event, void *eventParam)
{
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
switch (event)
{
case CYBLE_EVT_STACK_ON:
/* start advertising */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult == CYBLE_ERROR_OK)
{
#ifdef LED_INDICATION
ADV_LED_ON();
#endif /* LED_INDICATION */
}
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
sendNotifications = 0;
#ifdef ENABLE_SPI_ONLY_WHEN_CONNECTED
/* Stop SPI Slave operation */
SPI_Stop();
#endif
#ifdef LED_INDICATION
/* Indicate disconnect event to user */
DISCON_LED_ON();
CyDelay(3000);
#endif /* LED_INDICATION */
/* start advertising */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult == CYBLE_ERROR_OK)
{
#ifdef LED_INDICATION
ADV_LED_ON();
#endif /* LED_INDICATION */
}
break;
case CYBLE_EVT_GATT_CONNECT_IND:
#ifdef LED_INDICATION
CONNECT_LED_ON();
#endif /* LED_INDICATION */
#ifdef ENABLE_SPI_ONLY_WHEN_CONNECTED
/* Start SPI Slave operation */
SPI_Start();
#endif
break;
/* Client may do Write Value or Write Value without Response. Handle both */
case CYBLE_EVT_GATTS_WRITE_REQ:
case CYBLE_EVT_GATTS_WRITE_CMD_REQ:
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
/* Handling Notification Enable */
if(wrReqParam->handleValPair.attrHandle == CYBLE_SPI_READ_SPI_READ_DATA_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
CYBLE_GATT_HANDLE_VALUE_PAIR_T SPINotificationCCDHandle;
uint8 SPICCDValue[2];
/* Extract CCCD Notification enable flag */
sendNotifications = wrReqParam->handleValPair.value.val[0];
/* Write the present SPI notification status to the local variable */
SPICCDValue[0] = sendNotifications;
SPICCDValue[1] = 0x00;
/* Update CCCD handle with notification status data*/
SPINotificationCCDHandle.attrHandle = CYBLE_SPI_READ_SPI_READ_DATA_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
SPINotificationCCDHandle.value.val = SPICCDValue;
SPINotificationCCDHandle.value.len = 2;
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&SPINotificationCCDHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_LOCALLY_INITIATED);
}
/* Handling Write data from Client */
else if(wrReqParam->handleValPair.attrHandle == CYBLE_SPI_WRITE_SPI_WRITE_DATA_CHAR_HANDLE)
{
while(SPI_SpiIsBusBusy())
{
}
SPI_SpiUartClearTxBuffer();
SPI_SpiUartPutArray(wrReqParam->handleValPair.value.val,wrReqParam->handleValPair.value.len);
}
if (event == CYBLE_EVT_GATTS_WRITE_REQ)
{
CyBle_GattsWriteRsp(cyBle_connHandle);
}
break;
default:
break;
}
}
/*******************************************************************************
* Function Name: AppCallBack()
********************************************************************************
*
* Summary:
* This is an event callback function to receive events from the BLE Component.
*
*******************************************************************************/
void AppCallBack(uint32 event, void* eventParam)
{
CYBLE_API_RESULT_T apiResult;
CYBLE_GAP_BD_ADDR_T localAddr;
CYBLE_GAP_AUTH_INFO_T *authInfo;
uint8 i;
switch (event)
{
/**********************************************************
* General Events
***********************************************************/
case CYBLE_EVT_STACK_ON: /* This event is received when the component is Started */
/* Enter into discoverable mode so that remote can search it. */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
DBG_PRINTF("StartAdvertisement API Error: %d \r\n", apiResult);
}
DBG_PRINTF("Bluetooth On, StartAdvertisement with addr: ");
localAddr.type = 0u;
CyBle_GetDeviceAddress(&localAddr);
for(i = CYBLE_GAP_BD_ADDR_SIZE; i > 0u; i--)
{
DBG_PRINTF("%2.2x", localAddr.bdAddr[i-1]);
}
DBG_PRINTF("\r\n");
break;
case CYBLE_EVT_TIMEOUT:
break;
case CYBLE_EVT_HARDWARE_ERROR: /* This event indicates that some internal HW error has occurred. */
DBG_PRINTF("CYBLE_EVT_HARDWARE_ERROR \r\n");
break;
/* This event will be triggered by host stack if BLE stack is busy or not busy.
* Parameter corresponding to this event will be the state of BLE stack.
* BLE stack busy = CYBLE_STACK_STATE_BUSY,
* BLE stack not busy = CYBLE_STACK_STATE_FREE
*/
case CYBLE_EVT_STACK_BUSY_STATUS:
DBG_PRINTF("CYBLE_EVT_STACK_BUSY_STATUS: %x\r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_HCI_STATUS:
DBG_PRINTF("CYBLE_EVT_HCI_STATUS: %x \r\n", *(uint8 *)eventParam);
break;
/**********************************************************
* GAP Events
***********************************************************/
case CYBLE_EVT_GAP_AUTH_REQ:
DBG_PRINTF("CYBLE_EVT_AUTH_REQ: security=%x, bonding=%x, ekeySize=%x, err=%x \r\n",
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).security,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).bonding,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).ekeySize,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).authErr);
break;
case CYBLE_EVT_GAP_PASSKEY_ENTRY_REQUEST:
DBG_PRINTF("CYBLE_EVT_PASSKEY_ENTRY_REQUEST press 'p' to enter passkey \r\n");
break;
case CYBLE_EVT_GAP_PASSKEY_DISPLAY_REQUEST:
DBG_PRINTF("CYBLE_EVT_PASSKEY_DISPLAY_REQUEST %6.6ld \r\n", *(uint32 *)eventParam);
break;
case CYBLE_EVT_GAP_KEYINFO_EXCHNGE_CMPLT:
DBG_PRINTF("CYBLE_EVT_GAP_KEYINFO_EXCHNGE_CMPLT \r\n");
break;
case CYBLE_EVT_GAP_AUTH_COMPLETE:
authInfo = (CYBLE_GAP_AUTH_INFO_T *)eventParam;
(void)authInfo;
DBG_PRINTF("AUTH_COMPLETE: security:%x, bonding:%x, ekeySize:%x, authErr %x \r\n",
authInfo->security, authInfo->bonding, authInfo->ekeySize, authInfo->authErr);
break;
case CYBLE_EVT_GAP_AUTH_FAILED:
DBG_PRINTF("CYBLE_EVT_AUTH_FAILED: %x \r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP:
DBG_PRINTF("CYBLE_EVT_ADVERTISING, state: %x \r\n", CyBle_GetState());
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
/* Fast and slow advertising period complete, go to low power
* mode (Hibernate mode) and wait for an external
* user event to wake up the device again */
DBG_PRINTF("Hibernate \r\n");
LED_BLU_Write(LED_OFF);
LED_RED_Write(LED_ON);
LED_GRN_Write(LED_OFF);
SW2_ClearInterrupt();
Wakeup_Interrupt_ClearPending();
Wakeup_Interrupt_Start();
#if (DEBUG_UART_ENABLED == ENABLED)
/* Wait until debug info is sent */
while((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) != 0);
#endif /* (DEBUG_UART_ENABLED == ENABLED) */
CySysPmHibernate();
}
break;
case CYBLE_EVT_GAP_DEVICE_CONNECTED:
DBG_PRINTF("CYBLE_EVT_GAP_DEVICE_CONNECTED \r\n");
LED_BLU_Write(LED_OFF);
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
DBG_PRINTF("CYBLE_EVT_GAP_DEVICE_DISCONNECTED\r\n");
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
DBG_PRINTF("StartAdvertisement API Error: %d \r\n", apiResult);
}
break;
case CYBLE_EVT_GATTS_XCNHG_MTU_REQ:
{
uint16 mtu;
CyBle_GattGetMtuSize(&mtu);
DBG_PRINTF("CYBLE_EVT_GATTS_XCNHG_MTU_REQ, final mtu= %d \r\n", mtu);
}
break;
case CYBLE_EVT_GATTS_WRITE_REQ:
DBG_PRINTF("CYBLE_EVT_GATT_WRITE_REQ: %x = ",((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.attrHandle);
ShowValue(&((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.value);
(void)CyBle_GattsWriteRsp(((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->connHandle);
break;
case CYBLE_EVT_GAP_ENCRYPT_CHANGE:
DBG_PRINTF("CYBLE_EVT_GAP_ENCRYPT_CHANGE: %x \r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_GAPC_CONNECTION_UPDATE_COMPLETE:
DBG_PRINTF("CYBLE_EVT_CONNECTION_UPDATE_COMPLETE: %x \r\n", *(uint8 *)eventParam);
break;
/**********************************************************
* GATT Events
***********************************************************/
case CYBLE_EVT_GATT_CONNECT_IND:
DBG_PRINTF("CYBLE_EVT_GATT_CONNECT_IND: %x, %x \r\n", cyBle_connHandle.attId, cyBle_connHandle.bdHandle);
/* Register service specific callback functions */
HidsInit();
BasInit();
ScpsInit();
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
DBG_PRINTF("CYBLE_EVT_GATT_DISCONNECT_IND \r\n");
break;
case CYBLE_EVT_GATTS_READ_CHAR_VAL_ACCESS_REQ:
/* Triggered on server side when client sends read request and when
* characteristic has CYBLE_GATT_DB_ATTR_CHAR_VAL_RD_EVENT property set.
* This event could be ignored by application unless it need to response
* by error response which needs to be set in gattErrorCode field of
* event parameter. */
DBG_PRINTF("CYBLE_EVT_GATTS_READ_CHAR_VAL_ACCESS_REQ: handle: %x \r\n",
((CYBLE_GATTS_CHAR_VAL_READ_REQ_T *)eventParam)->attrHandle);
break;
/**********************************************************
* Other Events
***********************************************************/
case CYBLE_EVT_PENDING_FLASH_WRITE:
/* Inform application that flash write is pending. Stack internal data
* structures are modified and require to be stored in Flash using
* CyBle_StoreBondingData() */
DBG_PRINTF("CYBLE_EVT_PENDING_FLASH_WRITE\r\n");
break;
default:
DBG_PRINTF("OTHER event: %lx \r\n", event);
break;
}
}
/*******************************************************************************
* Function Name: GenericEventHandler
********************************************************************************
* Summary:
* Event handler function for the BLE stack. All the events by BLE stack
* are received by application through this function. For this, CyBle_ProcessEvents()
* should be called continuously in main loop.
*
* Parameters:
* event: event value
* eventParame: pointer to the location where relevant event data is stored
*
* Return:
* void
*
*******************************************************************************/
void GenericEventHandler(uint32 event, void * eventParam)
{
/* Local variables and data structures*/
CYBLE_GATTS_WRITE_REQ_PARAM_T writeReqData;
CYBLE_GATTC_WRITE_REQ_T writeADVcounterdata;
CYBLE_GAPC_ADV_REPORT_T scan_report;
CYBLE_GATTS_WRITE_CMD_REQ_PARAM_T writeCmdData;
CYBLE_API_RESULT_T apiResult;
CYBLE_GATTC_WRITE_REQ_T writeRGBdata;
switch(event)
{
case CYBLE_EVT_STACK_ON:
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_STACK_ON ");
UART_UartPutCRLF(' ');
#endif
/* At the start of the BLE stack, start advertisement */
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
break;
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP:
/* This event is received at every start or stop of peripheral advertisement*/
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
if((CYBLE_STATE_DISCONNECTED == CyBle_GetState()) && (switch_Role == FALSE))
{
/* If the current state of the BLE is Disconnected, then restart advertisement.
* Note that the advertisement should only be restarted if the switch flag is not
* TRUE. If switch role flag is TRUE, then there is no need to start advertisement
* as the GAP role has to be switched*/
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult == CYBLE_ERROR_OK)
{
#ifdef DEBUG_ENABLED
UART_UartPutString("Restart Advertisement ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
}
}
break;
case CYBLE_EVT_GAPC_SCAN_START_STOP:
/* This event is received at every start or stop of central scanning*/
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GAPC_SCAN_START_STOP ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
break;
case CYBLE_EVT_GATT_CONNECT_IND:
/* This event is received at GATT connection with a device. This event
* is received for both Client or Server role */
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GATT_CONNECT_IND ");
UART_UartPutCRLF(' ');
#endif
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
/* This event is received at GATT disconnection with a device. This event
* is received for both Client or Server role */
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GATT_DISCONNECT_IND ");
UART_UartPutCRLF(' ');
#endif
break;
case CYBLE_EVT_GATTS_WRITE_REQ:
/* This event is received at when Server receives a Write request from
* connected Client device */
/* Save the associated event parameter in local variable */
writeReqData = *(CYBLE_GATTS_WRITE_REQ_PARAM_T*)eventParam;
if(writeReqData.handleValPair.attrHandle == CYBLE_RGB_LED_CONTROL_CHAR_HANDLE)
{
/* If the Write request is on RGB LED Control Characteristic, then Client is
* trying to set a new color to the device. */
if(writeReqData.handleValPair.value.len == RGB_LED_DATA_LEN)
{
#ifdef DEBUG_ENABLED
UART_UartPutString("RGB CYBLE_EVT_GATTS_WRITE_REQ ");
UART_UartPutCRLF(' ');
#endif
/* Extract the four bytes containing the color value and store it */
RGBData[RGB_RED_INDEX] = writeReqData.handleValPair.value.val[0];
RGBData[RGB_GREEN_INDEX] = writeReqData.handleValPair.value.val[1];
RGBData[RGB_BLUE_INDEX] = writeReqData.handleValPair.value.val[2];
RGBData[RGB_INTENSITY_INDEX] = writeReqData.handleValPair.value.val[3];
/* Modify RGB Color my configuring the PrISM components with new density
* value*/
UpdateRGBled(RGBData, RGB_LED_DATA_LEN);
/* Update the RGB LED Control characteristic in GATT DB to allow
* Client to read the latest RGB LED color value set */
CyBle_GattsWriteAttributeValue(&writeReqData.handleValPair,0,&cyBle_connHandle,CYBLE_GATT_DB_LOCALLY_INITIATED);
#ifdef ENABLE_ADV_DATA_COUNTER
/* Increment the ADV data counter so that scanning Central device knows
* if this device has updated RGB LED data or not */
dataADVCounter++;
#endif
#ifdef DEBUG_ENABLED
UART_UartPutString("incremented dataADVCounter value in CYBLE_EVT_GATTS_WRITE_REQ= ");
PrintNum(dataADVCounter);
UART_UartPutCRLF(' ');
#endif
/* After receiveing the color value, set the switch role flag to allow the system
* to switch role to Central role */
switch_Role = TRUE;
#ifdef DEBUG_ENABLED
UART_UartPutString("switchRole to Central");
UART_UartPutCRLF(' ');
#endif
}
else
{
/* Send the error code for invalid attribute length packet */
SendErrorCode(CYBLE_GATT_WRITE_REQ,
writeReqData.handleValPair.attrHandle,
ERR_INVALID_ATT_LEN);
return;
}
}
/* As part of every write request, the server needs to send a write response. Note
* that this will be sent only if all the application layer conditions are met on a
* write request. Else, an appropriate error code is sent. */
CyBle_GattsWriteRsp(cyBle_connHandle);
break;
case CYBLE_EVT_GATTS_WRITE_CMD_REQ:
/* This event is generated whenever a Client device sends a Write Command (Write
* without response) to a connected Server. Save the associated event parameter in
* local variable. */
writeCmdData = *(CYBLE_GATTS_WRITE_CMD_REQ_PARAM_T*)eventParam;
/* Check if the Write command is for ADV Data counter characteristic */
if(writeCmdData.handleValPair.attrHandle == CYBLE_RGB_DATA_COUNT_CHAR_HANDLE)
{
/* If the data sent is of one byte, then proceed. */
if(writeCmdData.handleValPair.value.len == 1)
{
/* Extract and save the set ADV data counter value */
dataADVCounter = *(writeCmdData.handleValPair.value.val);
/* This increment is done to balance the ++ done as part of CYBLE_EVT_GATTS_WRITE_REQ */
dataADVCounter--;
/* Update the ADV data counter characteristic in GATT DB to allow
* Client to read the latest ADV data counter value */
CyBle_GattsWriteAttributeValue(&writeCmdData.handleValPair,
0,
&cyBle_connHandle,
CYBLE_GATT_DB_LOCALLY_INITIATED);
#ifdef DEBUG_ENABLED
UART_UartPutString("dataADVCounter from CYBLE_EVT_GATTS_WRITE_CMD_REQ = ");
PrintNum(dataADVCounter);
UART_UartPutCRLF(' ');
#endif
} /* if(writeCmdData.handleValPair.value.len == 1) */
}
break;
case CYBLE_EVT_GAPC_SCAN_PROGRESS_RESULT:
/* This event is generated whenever there is a peripheral device found by
* while scanning */
if(CYBLE_STATE_CONNECTED != CyBle_GetState())
{
/* If we are not connected to any peripheral device, then save the new device
* information so to add it to our list */
scan_report = *(CYBLE_GAPC_ADV_REPORT_T*)eventParam;
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GAPC_SCAN_PROGRESS_RESULT ");
UART_UartPutCRLF(' ');
#endif
#ifdef ENABLE_ADV_DATA_COUNTER
/* If ADV DATA COUNTER is enabled, then the central device would check
* if the counter in ADV packet of peripheral is less than its own counter
* or not. If yes, then it will consider the peripheral as a potential
* device to connect to.*/
if(scan_report.eventType == CYBLE_GAPC_CONN_UNDIRECTED_ADV)
{
/* If the scan report received is of advertising nature and the data
* length is as expected... */
if(scan_report.dataLen == new_advData.advDataLen)
{
/* If the second last value of the advertising data matches the custom
* marker, then the peripheral is a node of the network */
if(scan_report.data[scan_report.dataLen-2] == CUSTOM_ADV_DATA_MARKER)
{
/* If the ADV counter data in Advertising data is less than that of
* the value in this scanning device, then the node is a potential node
* whose color has to be updated. */
if((scan_report.data[scan_report.dataLen-1] < dataADVCounter) ||
((scan_report.data[scan_report.dataLen-1] == 255) && (dataADVCounter == 0)))
{
/* Potential node found*/
potential_node_found = TRUE;
/* Save the advertising peripheral address and type*/
memcpy(potential_node_bdAddr, scan_report.peerBdAddr, 6);
potential_node_bdAddrType = scan_report.peerAddrType;
#ifdef DEBUG_ENABLED
UART_UartPutString("potential_node_found ");
UART_UartPutCRLF(' ');
#endif
}
else
{
/* If the ADV data counter is equal or more than the data counter
* in this scanning device, then the node has latest RGB LED data
* and does not need to be connected to. Reset the potential node
* address */
potential_node_found = FALSE;
potential_node_bdAddrType = 0;
potential_node_bdAddr[0] = 0x00;
potential_node_bdAddr[1] = 0x00;
potential_node_bdAddr[2] = 0x00;
potential_node_bdAddr[3] = 0x00;
potential_node_bdAddr[4] = 0x00;
potential_node_bdAddr[5] = 0x00;
}
}
}
}
#endif
/* If the received scan data is part of scan response from a peripheral... */
if(scan_report.eventType == CYBLE_GAPC_SCAN_RSP)
{
/* If the data lenght of the scan reponse packet is equal to expected
* scan response data lenght...*/
if(scan_report.dataLen == SCAN_TAG_DATA_LEN)
{
#ifdef ENABLE_ADV_DATA_COUNTER
/* If a potential node had been found earlier as part of received
* advertising data, then compare the address of stored potential
* node and received address of the scan response */
if(potential_node_found)
{
/* Compare the two addresses and type */
if((!memcmp(scan_report.peerBdAddr, potential_node_bdAddr, 6))
&& (potential_node_bdAddrType == scan_report.peerAddrType))
{
#endif
/* If the scan report data matches the expected data (scan_tag),
* then it is our desired node */
if(!memcmp(scan_report.data, scan_tag, scan_report.dataLen))
{
#ifdef DEBUG_ENABLED
UART_UartPutString("Titan Found ");
UART_UartPutCRLF(' ');
#endif
/* Stop existing scan */
CyBle_GapcStopScan();
#ifdef DEBUG_ENABLED
UART_UartPutString("Stop Scan called ");
UART_UartPutCRLF(' ');
#endif
/* Save the peripheral BD address and type*/
peripAddr.type = scan_report.peerAddrType;
peripAddr.bdAddr[0] = scan_report.peerBdAddr[0];
peripAddr.bdAddr[1] = scan_report.peerBdAddr[1];
peripAddr.bdAddr[2] = scan_report.peerBdAddr[2];
peripAddr.bdAddr[3] = scan_report.peerBdAddr[3];
peripAddr.bdAddr[4] = scan_report.peerBdAddr[4];
peripAddr.bdAddr[5] = scan_report.peerBdAddr[5];
/* Set the flag to allow application to connect to the
* peripheral found */
clientConnectToDevice = TRUE;
#ifdef ENABLE_ADV_DATA_COUNTER
/* Reset the potential node flag*/
potential_node_found = FALSE;
#endif
}
#ifdef ENABLE_ADV_DATA_COUNTER
}
}
#endif
}
}
}
break;
case CYBLE_EVT_GAP_DEVICE_CONNECTED:
/* This event is received whenever the device connect on GAP layer */
if(ble_gap_state == BLE_CENTRAL)
{
#ifdef ENABLE_CENTRAL_DISCOVERY
/* The Device is connected now. Start Attributes discovery process.*/
CyBle_GattcStartDiscovery(cyBle_connHandle);
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GAP_DEVICE_CONNECTED ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
#else
/* If this system is currently acting in Central role and has connected
* to a peripheral device, then write directly the ADV counter data and
* RGB LED control data using attribute handles */
/* Set the device connected flag */
deviceConnected = TRUE;
#ifdef DEBUG_ENABLED
UART_UartPutString("Directly write RGB using Attr handle ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
/* Write the Data Counter value */
writeADVcounterdata.attrHandle = CYBLE_RGB_DATA_COUNT_CHAR_HANDLE;
writeADVcounterdata.value.val = &dataADVCounter;
writeADVcounterdata.value.len = 1;
CyBle_GattcWriteWithoutResponse(cyBle_connHandle, &writeADVcounterdata);
/* Write the RGB LED Value */
writeRGBdata.attrHandle = CYBLE_RGB_LED_CONTROL_CHAR_HANDLE;
writeRGBdata.value.val = RGBData;
writeRGBdata.value.len = RGB_LED_DATA_LEN;
CyBle_GattcWriteCharacteristicValue(cyBle_connHandle, &writeRGBdata);
#endif
}
break;
case CYBLE_EVT_GATTC_DISCOVERY_COMPLETE:
/* This event is generated whenever the discovery procedure is complete*/
#ifdef ENABLE_CENTRAL_DISCOVERY
deviceConnected = TRUE;
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GATTC_DISCOVERY_COMPLETE ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
/* Write the Data Counter value */
writeADVcounterdata.attrHandle = CYBLE_RGB_DATA_COUNT_CHAR_HANDLE;
writeADVcounterdata.value.val = &dataADVCounter;
writeADVcounterdata.value.len = 1;
CyBle_GattcWriteWithoutResponse(cyBle_connHandle, &writeADVcounterdata);
/* Write the RGB LED Value */
writeRGBdata.attrHandle = CYBLE_RGB_LED_CONTROL_CHAR_HANDLE;
writeRGBdata.value.val = RGBData;
writeRGBdata.value.len = RGB_LED_DATA_LEN;
CyBle_GattcWriteCharacteristicValue(cyBle_connHandle, &writeRGBdata);
#endif
break;
case CYBLE_EVT_GATTC_WRITE_RSP:
/* This event is generated when the Client device receives a response
* as part of the Write request sent earlier. This indicates that
* the RGB LED data was written successfully */
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GATTC_WRITE_RSP ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
/* Disconnect the existing connection and restart scanning */
if((cyBle_connHandle.bdHandle != 0))
{
CyBle_GapDisconnect(cyBle_connHandle.bdHandle);
restartScanning = TRUE;
#ifdef DEBUG_ENABLED
UART_UartPutString("Disconnect from CYBLE_EVT_GATTC_WRITE_RSP ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
}
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
/* This event is generated when the device disconnects from an
* existing connection */
deviceConnected = FALSE;
#ifdef DEBUG_ENABLED
UART_UartPutString("CYBLE_EVT_GAP_DEVICE_DISCONNECTED ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
if((ble_gap_state == BLE_PERIPHERAL) && (switch_Role != TRUE))
{
/* If the current role of this system was Peripheral and the role
* is not to be switched, then restart advertisement */
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
#ifdef DEBUG_ENABLED
UART_UartPutString("Restart Advertisement ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
}
}
else if((ble_gap_state == BLE_CENTRAL) && (switch_Role != TRUE))
{
/* If the current role of this system was Central and the role
* is not to be switched, then restart scanning */
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
CyBle_GapcStartScan(CYBLE_SCANNING_FAST);
#ifdef DEBUG_ENABLED
UART_UartPutString("Restart Scanning ");
SendBLEStatetoUART(CyBle_GetState());
UART_UartPutCRLF(' ');
#endif
}
}
break;
default:
eventParam = eventParam;
break;
}
}
void CustomEventHandler(uint32 event, void * eventParam)
{
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
switch(event)
{
case CYBLE_EVT_STACK_ON:
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
/* Start Advertisement and enter Discoverable mode*/
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
break;
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP:
/* Set the BLE state variable to control LED status */
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
/* Start Advertisement and enter Discoverable mode*/
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
}
break;
case CYBLE_EVT_GATT_CONNECT_IND:
/* This flag is used in application to check connection status */
deviceConnected = TRUE;
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
/* Update deviceConnected flag*/
deviceConnected = FALSE;
/* Reset CapSense notification flag to prevent further notifications
* being sent to Central device after next connection. */
//sendCapSenseSliderNotifications = FALSE;
/* Reset the CCCD value to disable notifications */
//updateNotificationCCCAttribute = TRUE;
/* Reset the color coordinates */
RGBledData[RED_INDEX] = 0;
RGBledData[GREEN_INDEX] = 0;
RGBledData[BLUE_INDEX] = 0;
RGBledData[INTENSITY_INDEX] = 0;
UpdateRGBled();
break;
case CYBLE_EVT_GATTS_WRITE_REQ:
/* This event is received when Central device sends a Write command
* on an Attribute.
* We first get the attribute handle from the event parameter and
* then try to match that handle with an attribute in the database.
*/
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
/* This condition checks whether the RGB LED characteristic was
* written to by matching the attribute handle.
* If the attribute handle matches, then the value written to the
* attribute is extracted and used to drive RGB LED.
*/
/* ADD_CODE to extract the attribute handle for the RGB LED
* characteristic from the custom service data structure.
*/
//if(wrReqParam->handleValPair.attrHandle == cyBle_customs[RGB_LED_SERVICE_INDEX].\
// customServiceInfo[RGB_LED_CHAR_INDEX].customServiceCharHandle)
if(wrReqParam->handleValPair.attrHandle == cyBle_customs[CYBLE_RGB_LED_SERVICE_SERVICE_INDEX].\
customServiceInfo[CYBLE_RGB_LED_SERVICE_RGB_LED_CHARACTERISTIC_CHAR_INDEX].customServiceCharHandle)
{
/* ADD_CODE to extract the value of the attribute from
* the handle-value pair database. */
RGBledData[RED_INDEX] = wrReqParam->handleValPair.value.val[RED_INDEX];
RGBledData[GREEN_INDEX] = wrReqParam->handleValPair.value.val[GREEN_INDEX];
RGBledData[BLUE_INDEX] = wrReqParam->handleValPair.value.val[BLUE_INDEX];
RGBledData[INTENSITY_INDEX] = wrReqParam->handleValPair.value.val[INTENSITY_INDEX];
/* Update the PrISM components and the attribute for RGB LED read
* characteristics */
UpdateRGBled();
//SendVoltageMeasurementNotification(voltageReading);
}
if(wrReqParam->handleValPair.attrHandle == 0x2A00) {
RGBledData[RED_INDEX] = 0;
RGBledData[GREEN_INDEX] = 0;
RGBledData[BLUE_INDEX] = 0;
RGBledData[INTENSITY_INDEX] = 0;
/* Update the PrISM components and the attribute for RGB LED read
* characteristics */
UpdateRGBled();
}
//printf("%d",wrReqParam->handleValPair.attrHandle);
/* ADD_CODE to send the response to the write request received. */
CyBle_GattsWriteRsp(cyBle_connHandle);
break;
case CYBLE_EVT_GATTS_READ_CHAR_VAL_ACCESS_REQ:
// Is this in response to a read request?
break;
default:
break;
}
}
/*****************************************************************************
* Function Name: EventHandler()
******************************************************************************
* Summary:
* Handles the events generated by stack and take necessary actions when
* event is received.
*
* Parameters:
* eventCode - the event code
* *event_params - the event parameters
*
* Return:
* None.
*
* Note:
*
*****************************************************************************/
void EventHandler(uint32 eventCode, void *eventParam)
{
// Local variable to store the data received as part of the Write request
// events.
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
// Log all the events.
eventCodesLog[pointer++] = eventCode;
switch(eventCode)
{
//////////////////////////////////////////////////////////////////////
// General events
//////////////////////////////////////////////////////////////////////
// This event is received when the module is started.
case CYBLE_EVT_STACK_ON: // eventCode == 0x01
#if LOWPOWERMODE_ENABLED
// Get the configured clock parameters for BLE subsystem.
CyBle_GetBleClockCfgParam(&clockConfig);
// Set the device sleep-clock accuracy (SCA) based on the
// tuned ppm of the WCO.
clockConfig.bleLlSca = CYBLE_LL_SCA_000_TO_020_PPM;
// Set the clock parameter of BLESS with updated values.
CyBle_SetBleClockCfgParam(&clockConfig);
#endif
// Start fast advertisement
_BLE_restartAdvertisement = TRUE;
break;
// This event is received when there is a timeout and application
// needs to handle the event. Timeout reason is defined by
// CYBLE_TO_REASON_CODE_T.
case CYBLE_EVT_TIMEOUT: // eventCode == 0x02
// If triggered by the advertisement timeout.
if( *(CYBLE_TO_REASON_CODE_T *)eventParam == CYBLE_GAP_ADV_MODE_TO ) {
}
break;
// This event is generated when the internal stack buffer is full
// and no more data can be accepted or the stack has buffer available
// and can accept data. This event is used by application to prevent
// pushing lot of data to stack.
case CYBLE_EVT_STACK_BUSY_STATUS: // eventCode == 0x05
// Extract the present stack status.
_BLE_busyStatus = *(uint8*)eventParam;
break;
//////////////////////////////////////////////////////////////////////
// GAP events
//////////////////////////////////////////////////////////////////////
// This event is received by Peripheral and Central devices. When it is
// received by Peripheral, peripheral needs to Call CyBle_GappAuthReqReply()
// to reply to authentication request from Central.
case CYBLE_EVT_GAP_AUTH_REQ: // eventCode == 0x21
// Reply to the authentification request.
CyBle_GappAuthReqReply(connectionHandle.bdHandle, &cyBle_authInfo);
break;
// Authentication process failed between two devices. The return value
// of type CYBLE_GAP_AUTH_FAILED_REASON_T indicates the reason for failure.
case CYBLE_EVT_GAP_AUTH_FAILED: // eventCode == 0x25
break;
// If the current BLE state is Disconnected, then the Advertisement
// Start_Stop event implies that advertisement has stopped.
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP: // eventCode == 0x26
// Restart fast advertisement
if(CyBle_GetState() != CYBLE_STATE_ADVERTISING)
_BLE_restartAdvertisement = TRUE;
break;
// This event is generated at the GAP Peripheral end after
// connection is completed with peer Centra device.
case CYBLE_EVT_GAP_DEVICE_CONNECTED: // eventCode == 0x27
break;
// Disconnected from remote device or failed to establish
// connection. Parameter returned with the event contains pointer to
// the reason for disconnection.
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED: // eventCode == 0x28
break;
// This event is generated at the GAP Central and the Peripheral end
// after connection parameter update is requested from the host to
// the controller. Event parameter is a pointer to a structure of type
// CYBLE_GAP_CONN_PARAM_UPDATED_IN_CONTROLLER_T.
case CYBLE_EVT_GAP_CONNECTION_UPDATE_COMPLETE: // eventCode == 0x2A
break;
//////////////////////////////////////////////////////////////////////
// GATT events
//////////////////////////////////////////////////////////////////////
// This event is received when device is connected at GATT level.
case CYBLE_EVT_GATT_CONNECT_IND: // eventCode == 0x41
// Update attribute handle on GATT Connection.
connectionHandle = *(CYBLE_CONN_HANDLE_T *)eventParam;
// Set the connection status flag.
_BLE_deviceConnected = TRUE;
// Set all the flags for the current connection.
updateSensorsCCCDreq = TRUE;
updateControlValuesReq = TRUE;
_BLE_UpdateCCCD();
_BLE_UpdateControl();
_BLE_writeStatusFlags();
break;
// This event is received when device is disconnected at GATT level.
case CYBLE_EVT_GATT_DISCONNECT_IND: // eventCode == 0x42
// Reset the connection status flag.
_BLE_deviceConnected = FALSE;
// Reset the connection status flag.
_BLE_resetNeeded = TRUE;
break;
// 'MTU Exchange Request' received from GATT client device.
// Event parameter contains the MTU size of type CYBLE_GATT_XCHG_MTU_PARAM_T.
case CYBLE_EVT_GATTS_XCNHG_MTU_REQ: // eventCode == 0x43
// Establish the MTU that is going to be used during communication.
negotiatedMtu = (((CYBLE_GATT_XCHG_MTU_PARAM_T *)eventParam)->mtu < CYBLE_GATT_MTU) ?
((CYBLE_GATT_XCHG_MTU_PARAM_T *)eventParam)->mtu : CYBLE_GATT_MTU;
break;
// This event is received when Central device sends a Write command
// on an Attribute.
case CYBLE_EVT_GATTS_WRITE_REQ: // eventCode == 0x4C
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
// The peripheral has received a write command on the Sensors
// Characteristic CCCD.
if(CYBLE_CAPSENSE_SENSORS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE ==
wrReqParam->handleValPair.attrHandle)
{
// Extract the Write value sent by the Client CCCD.
if( wrReqParam->handleValPair.value.val[CYBLE_CAPSENSE_SENSORS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX] & CCCD_NTF_BIT_MASK )
sendDataNotifications = TRUE;
else
sendDataNotifications = FALSE;
if( wrReqParam->handleValPair.value.val[CYBLE_CAPSENSE_SENSORS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX] & CCCD_IND_BIT_MASK )
sendDataIndications = TRUE;
else
sendDataIndications = FALSE;
// Set flag to allow CCCD to be updated.
updateSensorsCCCDreq = TRUE;
}
// The peripheral has received a write command on the Control
// Characteristic.
else if(CYBLE_CAPSENSE_CONTROL_CHAR_HANDLE ==
wrReqParam->handleValPair.attrHandle)
{
// Update 'acquireData' flag:
// FALSE only if 'Status_Acquiring' is TRUE;
// TRUE only if 'Status_Ready' is also TRUE.
if ( Status_Acquiring && !wrReqParam->handleValPair.value.val[CONTROL_ACQUIRE_DATA_BYTE_MASK] )
_BLE_acquireData = FALSE;
else if ( Status_Ready && wrReqParam->handleValPair.value.val[CONTROL_ACQUIRE_DATA_BYTE_MASK] )
_BLE_acquireData = TRUE;
// Update 'sendData' flag:
// FALSE only if 'Status_NoMoreData' is TRUE;
// TRUE only if 'Status_DataAcquired' is also TRUE.
if ( !wrReqParam->handleValPair.value.val[CONTROL_SEND_DATA_BYTE_MASK] && Status_NoMoreData )
_BLE_sendData = FALSE;
else if ( wrReqParam->handleValPair.value.val[CONTROL_SEND_DATA_BYTE_MASK] && Status_DataAcquired )
_BLE_sendData = TRUE;
// Update 'sendDataSyncronously' flag:
// FALSE only if 'Status_Acquiring' OR 'Status_Ready' is TRUE;
// TRUE only if 'Status_Ready' is also TRUE.
if ( (Status_Acquiring || Status_Ready) && !wrReqParam->handleValPair.value.val[CONTROL_SEND_DATA_SYNCHRONOUSLY_BYTE_MASK] )
_BLE_sendDataSynchronously = FALSE;
else if ( Status_Ready && wrReqParam->handleValPair.value.val[CONTROL_SEND_DATA_SYNCHRONOUSLY_BYTE_MASK] )
_BLE_sendDataSynchronously = TRUE;
// Set the flag to allow the control values to be updated.
updateControlValuesReq = TRUE;
}
// The peripheral has received a write command on the Status
// Characteristic CCCD.
else if(CYBLE_CAPSENSE_STATUS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE ==
wrReqParam->handleValPair.attrHandle)
{
// Extract the Write value sent by the Client CCCD.
if( wrReqParam->handleValPair.value.val[CYBLE_CAPSENSE_STATUS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX] & CCCD_NTF_BIT_MASK )
sendStatusNotifications = TRUE;
else
sendStatusNotifications = FALSE;
if( wrReqParam->handleValPair.value.val[CYBLE_CAPSENSE_STATUS_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX] & CCCD_IND_BIT_MASK )
sendStatusIndications = TRUE;
else
sendStatusIndications = FALSE;
// Set flag to allow CCCD to be updated.
updateStatusCCCDreq = TRUE;
}
// Update control flags
_BLE_sendStatus = sendStatusNotifications | sendStatusIndications;
// Send the response to the write request received.
CyBle_GattsWriteRsp(connectionHandle);
break;
// Confirmation to indication response from client device. Event
// parameter is a pointer to a structure of type CYBLE_CONN_HANDLE_T.
case CYBLE_EVT_GATTS_HANDLE_VALUE_CNF: // eventCode == 0x54
break;
// Event parameters for characteristic read value access event
// generated by BLE Stack upon an access of Characteristic value read
// for the characteristic definition which has
// CYBLE_GATT_DB_ATTR_CHAR_VAL_RD_EVENT property set.
case CYBLE_EVT_GATTS_READ_CHAR_VAL_ACCESS_REQ: // eventCode == 0x57
// Make sure all the flags are updated.
_BLE_writeStatusFlags();
break;
default:
break;
}
}
/*******************************************************************************
* Function Name: AppCallBack
********************************************************************************
*
* Summary:
* This is an event callback function to receive events from the CYBLE Component.
*
* Parameters:
* uint8 event: Event from the CYBLE component.
* void* eventParams: A structure instance for corresponding event type. The
* list of event structure is described in the component
* datasheet.
*
* Return:
* None
*
*******************************************************************************/
void AppCallBack(uint32 event, void* eventParam)
{
CYBLE_API_RESULT_T apiResult;
CYBLE_GATTS_WRITE_REQ_PARAM_T *wrReqParam;
switch (event)
{
/**********************************************************
* General Events
***********************************************************/
case CYBLE_EVT_STACK_ON: /* This event is received when component is Started */
/* Enter into discoverable mode so that remote can search it. */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
//ShowError();
}
printf("CYBLE_EVT_STACK_ON\n");
break;
case CYBLE_EVT_TIMEOUT:
printf("CYBLE_EVT_TIMEOUT\n");
break;
case CYBLE_EVT_HARDWARE_ERROR: /* This event indicates that some internal HW error has occurred. */
//ShowError();
break;
/**********************************************************
* GAP Events
***********************************************************/
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP:
printf("CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP\n");
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
/* Fast and slow advertising period complete, go to low power
* mode (Hibernate mode) and wait for an external
* user event to wake up the device again */
// Advertising_LED_Write(LED_OFF);
// Disconnect_LED_Write(LED_ON);
// SW2_ClearInterrupt();
// Wakeup_Interrupt_ClearPending();
// Wakeup_Interrupt_Start();
CySysPmHibernate();
}
break;
case CYBLE_EVT_GAP_DEVICE_CONNECTED:
printf("CYBLE_EVT_GAP_DEVICE_CONNECTED\n");
// Disconnect_LED_Write(LED_OFF);
// Advertising_LED_Write(LED_OFF);
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
/* Put the device to discoverable mode so that remote can search it. */
printf("CYBLE_EVT_GAP_DEVICE_DISCONNECTED\n");
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
//ShowError();
}
break;
case CYBLE_EVT_GAPC_CONNECTION_UPDATE_COMPLETE:
break;
/**********************************************************
* GATT Events
***********************************************************/
case CYBLE_EVT_GATT_CONNECT_IND:
printf("CYBLE_EVT_GATT_CONNECT_IND\n");
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
printf("CYBLE_EVT_GATT_DISCONNECT_IND\n");
// Reset the rotation notification
_rotationCCCDValue[0] = 0;
_voltageCCCDValue[0] = 0;
_drawCCCDValue[0] = 0;
break;
case CYBLE_EVT_GATTS_WRITE_REQ:
printf("CYBLE_EVT_GATTS_WRITE_REQ\n");
wrReqParam = (CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
/* Write request for time/date */
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_TIME_CHAR_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(CYBLE_GATT_ERR_NONE == CyBle_GattsWriteAttributeValue(&wrReqParam->handleValPair, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED))
{
uint64_t datetime = wrReqParam->handleValPair.value.val[0];
datetime <<= 8;
datetime |= wrReqParam->handleValPair.value.val[1];
datetime <<= 8;
datetime |= wrReqParam->handleValPair.value.val[2];
datetime <<= 8;
datetime |= wrReqParam->handleValPair.value.val[3];
printf("Date time EPOCH: %08x\n", (unsigned int)(datetime >> 32));
printf("Date time EPOCH: %08x\n", (unsigned int)datetime);
RTC_SetUnixTime(datetime);
}
}
/* Write request for time/date */
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_FILTERGAIN_CHAR_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(CYBLE_GATT_ERR_NONE == CyBle_GattsWriteAttributeValue(&wrReqParam->handleValPair, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED))
{
_rotationFilterGain = wrReqParam->handleValPair.value.val[0];
_rotationFilterGain <<= 8;
_rotationFilterGain |= wrReqParam->handleValPair.value.val[1];
_rotationFilterGain <<= 8;
_rotationFilterGain |= wrReqParam->handleValPair.value.val[2];
_rotationFilterGain <<= 8;
_rotationFilterGain |= wrReqParam->handleValPair.value.val[3];
}
}
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_DRAWOFFSET_CHAR_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(CYBLE_GATT_ERR_NONE == CyBle_GattsWriteAttributeValue(&wrReqParam->handleValPair, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED))
{
_drawOffset = wrReqParam->handleValPair.value.val[0];
_drawOffset <<= 8;
_drawOffset |= wrReqParam->handleValPair.value.val[1];
}
}
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_ROTATIONSPEED_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(wrReqParam->handleValPair.value.val[CYBLE_POVDISPLAY_ROTATIONSPEED_CHARACTERISTIC_USER_DESCRIPTION_DESC_INDEX] == 1)
{
_rotationCCCDValue[0] = 1;
}
else
{
_rotationCCCDValue[0] = 0;
}
/* Update CCCD handle with notification status data*/
_rotationNotificationCCCDHandle.attrHandle = CYBLE_POVDISPLAY_ROTATIONSPEED_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
_rotationNotificationCCCDHandle.value.val = _rotationCCCDValue;
_rotationNotificationCCCDHandle.value.len = 2;
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&_rotationNotificationCCCDHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED);
}
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_VOLTAGE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(wrReqParam->handleValPair.value.val[CYBLE_POVDISPLAY_VOLTAGE_CHARACTERISTIC_USER_DESCRIPTION_DESC_INDEX] == 1)
{
_voltageCCCDValue[0] = 1;
}
else
{
_voltageCCCDValue[0] = 0;
}
/* Update CCCD handle with notification status data*/
_voltageNotificationCCCDHandle.attrHandle = CYBLE_POVDISPLAY_VOLTAGE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
_voltageNotificationCCCDHandle.value.val = _voltageCCCDValue;
_voltageNotificationCCCDHandle.value.len = 2;
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&_voltageNotificationCCCDHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED);
}
if(wrReqParam->handleValPair.attrHandle == CYBLE_POVDISPLAY_DRAWTIME_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* only update the value and write the response if the requested write is allowed */
if(wrReqParam->handleValPair.value.val[CYBLE_POVDISPLAY_DRAWTIME_CHARACTERISTIC_USER_DESCRIPTION_DESC_INDEX] == 1)
{
_drawCCCDValue[0] = 1;
}
else
{
_drawCCCDValue[0] = 0;
}
/* Update CCCD handle with notification status data*/
_drawNotificationCCCDHandle.attrHandle = CYBLE_POVDISPLAY_DRAWTIME_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE;
_drawNotificationCCCDHandle.value.val = _drawCCCDValue;
_drawNotificationCCCDHandle.value.len = 2;
/* Report data to BLE component for sending data when read by Central device */
CyBle_GattsWriteAttributeValue(&_drawNotificationCCCDHandle, 0, &cyBle_connHandle, CYBLE_GATT_DB_PEER_INITIATED);
}
CyBle_GattsWriteRsp(cyBle_connHandle);
break;
/**********************************************************
* Other Events
***********************************************************/
case CYBLE_EVT_STACK_BUSY_STATUS:
/* This event is generated when the internal stack buffer is full and no more
* data can be accepted or the stack has buffer available and can accept data.
* This event is used by application to prevent pushing lot of data to stack. */
/* Extract the present stack status */
_busyStatus = * (uint8*)eventParam;
break;
default:
break;
}
/*******************************************************************************
* Function Name: ProcessWriteReq
********************************************************************************
*
* Summary:
* Process all GATT level write requests and responds with appropriate status
*
* Parameters:
* CYBLE_GATTS_WRITE_CMD_REQ_PARAM_T: GATT write command request prameter
*
* Return:
* None
*
*******************************************************************************/
void ProcessWriteReq(CYBLE_GATTS_WRITE_CMD_REQ_PARAM_T writeCmdReq)
{
bool value_val;
uint8 status = LOCKED, key_buf[LOCK_CODE_LENGTH];
uint16 beaconPeriod = 0;
CYBLE_GATT_HANDLE_VALUE_PAIR_T valuePairT;
/* Reset error send flag */
errorSent = false;
/* Retrieve the LOCK status from the GATT DB */
valuePairT.attrHandle =
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_STATE_CHAR_HANDLE;
valuePairT.value.val = (uint8 *)&value_val;
valuePairT.value.len = sizeof(bool);
CyBle_GattsReadAttributeValue( &valuePairT, &cyBle_connHandle,
CYBLE_GATT_DB_LOCALLY_INITIATED );
/* Check the LOCK status */
if(valuePairT.value.val[0] == UNLOCKED)
{
/*URL Data*/
if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_URI_DATA_CHAR_HANDLE)
{
/* First byte should be scheme prefix and length should be less than
* or equal to MAX_URL_LENGTH */
if( (writeCmdReq.handleValPair.value.len <= MAX_URL_LENGTH) &&
(writeCmdReq.handleValPair.value.val[0] < URL_PREFIX_MAX) )
{
uint8 TempURL[MAX_URL_LENGTH];
memset(TempURL, 0, MAX_URL_LENGTH);
memcpy(
TempURL,
writeCmdReq.handleValPair.value.val,
writeCmdReq.handleValPair.value.len
);
if( CYBLE_GATT_ERR_NONE == WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_URI_DATA_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED ) )
{
/* Update the length as per the new URL data */
URLLength = writeCmdReq.handleValPair.value.len;
cyBle_attValuesLen[16].actualLength = URLLength;
/* Update the URL data */
memcpy(CurrentURL, TempURL, MAX_URL_LENGTH);
}
}
else if (writeCmdReq.handleValPair.value.len > MAX_URL_LENGTH)
{
/* Invalid length. Send error response */
SendErrorResponse (
CYBLE_EDDYSTONE_CONFIGURATION_URI_DATA_CHAR_HANDLE,
CYBLE_GATT_ERR_INVALID_ATTRIBUTE_LEN
);
}
}
/* Lock Characteristic */
else if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE)
{
if(writeCmdReq.handleValPair.value.len == LOCK_CODE_LENGTH)
{
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED
);
/* Update the LOCK characteristic */
status = LOCKED;
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_STATE_CHAR_HANDLE,
sizeof(bool), &status,
CYBLE_GATT_DB_LOCALLY_INITIATED
);
}
else
{
/* Invalid length. Send error response */
SendErrorResponse(CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE,
CYBLE_GATT_ERR_INVALID_ATTRIBUTE_LEN);
}
}
/* Advertised Tx power level */
else if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_ADVERTISED_TX_POWER_LEVELS_CHAR_HANDLE)
{
if (writeCmdReq.handleValPair.value.len == MAX_NUM_PWR_LVL)
{
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_ADVERTISED_TX_POWER_LEVELS_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED
);
if (writeCmdReq.handleValPair.value.len == MAX_NUM_PWR_LVL)
{
/* Update Tx Power levels */
memcpy (
currentTxPowerLevels,
writeCmdReq.handleValPair.value.val,
MAX_NUM_PWR_LVL
);
}
else
{
SendErrorResponse (
CYBLE_EDDYSTONE_CONFIGURATION_ADVERTISED_TX_POWER_LEVELS_CHAR_HANDLE,
CYBLE_GATT_ERR_INVALID_ATTRIBUTE_LEN
);
}
}
else
{
/* Invalid length. Send error response */
SendErrorResponse (
CYBLE_EDDYSTONE_CONFIGURATION_ADVERTISED_TX_POWER_LEVELS_CHAR_HANDLE,
CYBLE_GATT_ERR_INVALID_ATTRIBUTE_LEN
);
}
}
/* Tx Power Mode */
else if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_TX_POWER_MODE_CHAR_HANDLE)
{
if(writeCmdReq.handleValPair.value.val[0] <= 0x03)
{
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_TX_POWER_MODE_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED
);
currentTxmode = writeCmdReq.handleValPair.value.val[0];
UpdateTxPower(currentTxmode);
}
else /* Invalid value. Write not permitted. */
{
SendErrorResponse (
CYBLE_EDDYSTONE_CONFIGURATION_TX_POWER_MODE_CHAR_HANDLE,
CYBLE_GATT_ERR_WRITE_NOT_PERMITTED
);
}
}
/* Beacon Period */
else if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_BEACON_PERIOD_CHAR_HANDLE)
{
beaconPeriod =
CyBle_Get16ByPtr(writeCmdReq.handleValPair.value.val);
/* Disable URL FRAMES */
if(beaconPeriod == 0)
{
eddystoneImplenmentation = EDDYSTONE_UID;
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_BEACON_PERIOD_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED
);
}
/* Values in valid range */
else if((beaconPeriod >= MIN_BEACON_PERIOD) &&
(beaconPeriod <= MAX_BEACON_PERIOD))
{
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_BEACON_PERIOD_CHAR_HANDLE,
writeCmdReq.handleValPair.value.len,
writeCmdReq.handleValPair.value.val,
CYBLE_GATT_DB_PEER_INITIATED
);
CurrentAdvPeriod = beaconPeriod / 0.625;
eddystoneImplenmentation = EDDYSTONE_URL;
}
else
{
uint16 temp = MIN_BEACON_PERIOD;
/* Values not supportes. Write default values */
WriteAttributeValue(
CYBLE_EDDYSTONE_CONFIGURATION_BEACON_PERIOD_CHAR_HANDLE,
sizeof(temp),
(uint8 *)&temp,
CYBLE_GATT_DB_PEER_INITIATED);
CurrentAdvPeriod = CYBLE_GAP_ADV_ADVERT_INTERVAL_NONCON_MIN;
eddystoneImplenmentation = EDDYSTONE_URL;
}
}
/* Reset the Configurations to default */
else if((writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_RESET_CHAR_HANDLE) &&
(writeCmdReq.handleValPair.value.val[0] != 0))
{
ResetGattDb();
}
}
else if(valuePairT.value.val[0] == LOCKED)
{
if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE)
{
/* Accesing the lock in LOCKED state */
SendErrorResponse(writeCmdReq.handleValPair.attrHandle,
CYBLE_GATT_ERR_INSUFFICIENT_AUTHORIZATION);
}
}
if(writeCmdReq.handleValPair.attrHandle ==
CYBLE_EDDYSTONE_CONFIGURATION_UNLOCK_CHAR_HANDLE)
{
if(writeCmdReq.handleValPair.value.len == LOCK_CODE_LENGTH)
{
if(valuePairT.value.val[0] == LOCKED)
{
int compareResult;
valuePairT.attrHandle =
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE;
valuePairT.value.val = key_buf;
valuePairT.value.len = sizeof(LOCK);
CyBle_GattsReadAttributeValue(&valuePairT, &cyBle_connHandle,
CYBLE_GATT_DB_LOCALLY_INITIATED);
compareResult = memcmp (
valuePairT.value.val,
writeCmdReq.handleValPair.value.val,
LOCK_CODE_LENGTH
);
if(compareResult == 0)
{
status = UNLOCKED;
/* Update the LOCK STATE */
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_STATE_CHAR_HANDLE,
sizeof(bool), &status,
CYBLE_GATT_DB_LOCALLY_INITIATED
);
/* Reset the LOCK */
WriteAttributeValue (
CYBLE_EDDYSTONE_CONFIGURATION_LOCK_CHAR_HANDLE,
sizeof(LOCK), (uint8 *)LOCK,
CYBLE_GATT_DB_LOCALLY_INITIATED
);
}
else /* LOCK not matched */
{
SendErrorResponse(writeCmdReq.handleValPair.attrHandle,
CYBLE_GATT_ERR_INSUFFICIENT_AUTHORIZATION);
}
}
}
else /* Invalid length */
{
SendErrorResponse(writeCmdReq.handleValPair.attrHandle,
CYBLE_GATT_ERR_INVALID_ATTRIBUTE_LEN);
}
}
if (errorSent == false)
{
CyBle_GattsWriteRsp(cyBle_connHandle);
}
}
/*******************************************************************************
* Function Name: AppCallBack()
********************************************************************************
*
* Summary:
* This finction handles events that are generated by BLE stack.
*
* Parameters:
* None
*
* Return:
* None
*
*******************************************************************************/
void AppCallBack(uint32 event, void* eventParam)
{
CYBLE_API_RESULT_T apiResult;
uint32 i = 0u;
switch (event)
{
/**********************************************************
* General Events
***********************************************************/
case CYBLE_EVT_STACK_ON: /* This event received when component is Started */
/* Enter in to discoverable mode so that remote can search it. */
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
}
break;
case CYBLE_EVT_HARDWARE_ERROR: /* This event indicates that some internal HW error has occurred. */
DBG_PRINTF("CYBLE_EVT_HARDWARE_ERROR\r\n");
break;
/**********************************************************
* GAP Events
***********************************************************/
case CYBLE_EVT_GAP_AUTH_REQ:
DBG_PRINTF("EVT_AUTH_REQ: security=%x, bonding=%x, ekeySize=%x, err=%x \r\n",
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).security,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).bonding,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).ekeySize,
(*(CYBLE_GAP_AUTH_INFO_T *)eventParam).authErr);
break;
case CYBLE_EVT_GAP_PASSKEY_ENTRY_REQUEST:
DBG_PRINTF("EVT_PASSKEY_ENTRY_REQUEST press 'p' to enter passkey \r\n");
break;
case CYBLE_EVT_GAP_PASSKEY_DISPLAY_REQUEST:
DBG_PRINTF("EVT_PASSKEY_DISPLAY_REQUEST %6.6ld \r\n", *(uint32 *)eventParam);
break;
case CYBLE_EVT_GAP_KEYINFO_EXCHNGE_CMPLT:
DBG_PRINTF("EVT_GAP_KEYINFO_EXCHNGE_CMPLT \r\n");
break;
case CYBLE_EVT_GAP_AUTH_COMPLETE:
DBG_PRINTF("AUTH_COMPLETE");
break;
case CYBLE_EVT_GAP_AUTH_FAILED:
DBG_PRINTF("EVT_AUTH_FAILED: %x \r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_GAP_DEVICE_CONNECTED:
DBG_PRINTF("EVT_GAP_DEVICE_CONNECTED: %d \r\n", connHandle.bdHandle);
LED_WRITE_MACRO(LED_OFF);
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
DBG_PRINTF("EVT_GAP_DEVICE_DISCONNECTED\r\n");
apiResult = CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
if(apiResult != CYBLE_ERROR_OK)
{
DBG_PRINTF("StartAdvertisement API Error: %d \r\n", apiResult);
}
break;
case CYBLE_EVT_GAP_ENCRYPT_CHANGE:
DBG_PRINTF("EVT_GAP_ENCRYPT_CHANGE: %x \r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_GAPC_CONNECTION_UPDATE_COMPLETE:
DBG_PRINTF("EVT_CONNECTION_UPDATE_COMPLETE: %x \r\n", *(uint8 *)eventParam);
break;
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP:
if(CYBLE_STATE_DISCONNECTED == CyBle_GetState())
{
/* Fast and slow advertising period complete, go to low power
* mode (Hibernate mode) and wait for an external
* user event to wake up the device again */
DBG_PRINTF("Entering low power mode...\r\n");
Bootloading_LED_Write(LED_ON);
Advertising_LED_1_Write(LED_ON);
Advertising_LED_2_Write(LED_ON);
Bootloader_Service_Activation_ClearInterrupt();
Wakeup_Interrupt_ClearPending();
Wakeup_Interrupt_Start();
CySysPmHibernate();
}
break;
/**********************************************************
* GATT Events
***********************************************************/
case CYBLE_EVT_GATTS_WRITE_REQ:
DBG_PRINTF("EVT_GATT_WRITE_REQ: %x = ",((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.attrHandle);
for(i = 0; i < ((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.value.len; i++)
{
DBG_PRINTF("%2.2x ", ((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.value.val[i]);
}
DBG_PRINTF("\r\n");
CyBle_GattsWriteAttributeValue(&((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair, 0u, \
&((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->connHandle, CYBLE_GATT_DB_PEER_INITIATED);
(void)CyBle_GattsWriteRsp(((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->connHandle);
break;
case CYBLE_EVT_GATT_CONNECT_IND:
connHandle = *(CYBLE_CONN_HANDLE_T *)eventParam;
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
connHandle.bdHandle = 0;
break;
case CYBLE_EVT_GATTS_WRITE_CMD_REQ:
/* Pass packet to bootloader emulator */
packetRXSize = ((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.value.len;
memcpy(&packetRX[0], ((CYBLE_GATTS_WRITE_REQ_PARAM_T *)eventParam)->handleValPair.value.val, packetRXSize);
packetRXFlag = 1u;
break;
case CYBLE_EVT_GATTS_PREP_WRITE_REQ:
(void)CyBle_GattsPrepWriteReqSupport(CYBLE_GATTS_PREP_WRITE_NOT_SUPPORT);
break;
case CYBLE_EVT_HCI_STATUS:
DBG_PRINTF("CYBLE_EVT_HCI_STATUS\r\n");
default:
break;
}
}
void StackEventHandler(uint32 event, void *eventParam) {
switch (event) {
//======================================================
// Mandatory events to be handled
//======================================================
case CYBLE_EVT_STACK_ON:
// Disable CCCD notification
initializeCounterCccDescriptor();
// Start BLE advertisement for 30 seconds
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
// Initialize descriptor
initializeRgbDescriptor();
break;
//======================================================
// GAP Events
//======================================================
case CYBLE_EVT_GAP_DEVICE_CONNECTED:
// BLE link is established
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED:
// Disable CCCD notification
initializeCounterCccDescriptor();
// Start BLE advertisement for 30 seconds
CyBle_GappStartAdvertisement(CYBLE_ADVERTISING_FAST);
break;
//======================================================
// GATT Events
//======================================================
case CYBLE_EVT_GATT_CONNECT_IND:
// This event is received when device is connected
// over GATT level
// Update attribute handle on GATT Connection
connectionHandle = *(CYBLE_CONN_HANDLE_T *)eventParam;
// This flag is used in application
// to check connection status
deviceConnected = 1;
break;
case CYBLE_EVT_GATT_DISCONNECT_IND:
// This event is received when device is disconnected
// Update deviceConnected flag
deviceConnected = 0;
break;
case CYBLE_EVT_GATTS_WRITE_REQ:
// This event is received when Central device sends
{
CYBLE_GATTS_WRITE_REQ_PARAM_T *writeReqParam;
// a Write command on an Attribute
writeReqParam =
(CYBLE_GATTS_WRITE_REQ_PARAM_T *) eventParam;
// When this event is triggered, the peripheral has
// received a write command on the custom characteristic
// Check if the returned handle is matching to
// Counter CCCD Write Attribute
if (writeReqParam->handleValPair.attrHandle
== COUNTER_CCC_HANDLE
) {
queueCounterCccDescriptor(
&(writeReqParam->handleValPair.value)
);
}
// Check if the returned handle is matching to
// RGB Control Write Attribute
if (writeReqParam->handleValPair.attrHandle
== RGB_CHAR_HANDLE
) {
queueRgbDescriptor(
&(writeReqParam->handleValPair.value)
);
}
// Send the response to the write request received.
CyBle_GattsWriteRsp(connectionHandle);
}
break;
default:
break;
}
}
/*************************************************************************************************************************
* Function Name: CustomEventHandler
**************************************************************************************************************************
* Summary: This is a call back event function to handle various events from BLE stack.
*
* Parameters:
* Event - Event returned
* EventParameter - Link to value of the event returned
*
* Return:
* void
*
*************************************************************************************************************************/
void CustomEventHandler(uint32 Event, void *EventParameter)
{
switch(Event)
{
/**********************************************************
* General Events
***********************************************************/
case CYBLE_EVT_STACK_ON: //This event is received when the BLE component is started
StartAdvertisement = TRUE; //Set the advertisement flag
break;
case CYBLE_EVT_STACK_BUSY_STATUS: //This event is generated when the internal stack buffer is full and no more data can be accepted or the stack has buffer available and can accept data
BLEStackStatus = *(uint8*)EventParameter; //Extract the BLE stack status
break;
/**********************************************************
* GAP Events
***********************************************************/
case CYBLE_EVT_GAPP_ADVERTISEMENT_START_STOP: //This event is received when the device starts or stops advertising
if(CyBle_GetState() == CYBLE_STATE_DISCONNECTED)
{
StartAdvertisement = TRUE; //Set the advertisement flag
}
break;
case CYBLE_EVT_GAP_DEVICE_DISCONNECTED: //This event is received when the device is disconnected
StartAdvertisement = TRUE; //Set the advertisement flag
break;
/**********************************************************
* GATT Events
***********************************************************/
case CYBLE_EVT_GATT_CONNECT_IND: //This event is received when the device is connected over GATT level
ConnectionHandle = *(CYBLE_CONN_HANDLE_T *)EventParameter; //Update the attribute handle on GATT connection
DeviceConnected = TRUE; //Set device connection status flag
ChangePowerPinDriveMode = FALSE; //Clear change power pin drive mode flag
break;
case CYBLE_EVT_GATT_DISCONNECT_IND: //This event is received when device is disconnected
DeviceConnected = FALSE; //Clear device connection status flag
TemperatureNotificationEnabled = FALSE; //Clear the temperature notification flag
PressureNotificationEnabled = FALSE; //Clear the pressure notification flag
AltitudeNotificationEnabled = FALSE; //Clear the altitude notification flag
UpdateTemperatureNotificationAttribute = TRUE; //Clear the update temperature notification flag
UpdatePressureNotificationAttribute = TRUE; //Clear the update pressure notification flag
UpdateAltitudeNotificationAttribute = TRUE; //Clear the update altitude notification flag
/* Clear temperature notification data */
TemperatureNotificationData[0x03] = TemperatureNotificationData[0x02] = TemperatureNotificationData[0x01] = TemperatureNotificationData[0x00] = ZERO;
/* Clear pressure notification data */
PressureNotificationData[0x03] = PressureNotificationData[0x02] = PressureNotificationData[0x01] = PressureNotificationData[0x00] = ZERO;
/* Clear altitude notification data */
AltitudeNotificationData[0x03] = AltitudeNotificationData[0x02] = AltitudeNotificationData[0x01] = AltitudeNotificationData[0x00] = ZERO;
LastTemperatureData = ZERO; //Clear last stored temperature notification data
LastPressureData = ZERO; //Clear last stored pressure notification data
LastAltitudeData = ZERO; //Clear last stored altitude notification data
ChangePowerPinDriveMode = TRUE; //Set change power pin drive mode flag
ConnectionParametersUpdateRequired = TRUE; //Set the Connection Parameters Update flag
UpdateNotificationCCCDAttribute(); //Update the CCCD writing by the Central device
break;
case CYBLE_EVT_GATTS_WRITE_REQ: //When this event is triggered, the peripheral has received a write command on the custom characteristic
/* Extract the write value from the event parameter */
WriteRequestedParameter = (CYBLE_GATTS_WRITE_REQ_PARAM_T *)EventParameter;
/* Check if command is for notification attribute and update the flag for sending notifications */
if(WriteRequestedParameter->handleValPair.attrHandle == CYBLE_BMP180_TEMPERATURE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* Set temperature notification flag so that application can start sending notifications */
TemperatureNotificationEnabled = WriteRequestedParameter->handleValPair.value.val[CYBLE_BMP180_TEMPERATURE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX];
UpdateTemperatureNotificationAttribute = TRUE; //Set flag to allow CCCD to be updated for next read operation
}
/* Check if command is for notification attribute and update the flag for sending notifications */
if(WriteRequestedParameter->handleValPair.attrHandle == CYBLE_BMP180_PRESSURE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* Set pressure notification flag so that application can start sending notifications */
PressureNotificationEnabled = WriteRequestedParameter->handleValPair.value.val[CYBLE_BMP180_PRESSURE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX];
UpdatePressureNotificationAttribute = TRUE; //Set flag to allow CCCD to be updated for next read operation
}
/* Check if command is for notification attribute and update the flag for sending notifications */
if(WriteRequestedParameter->handleValPair.attrHandle == CYBLE_BMP180_ALTITUDE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_HANDLE)
{
/* Set altitude notification flag so that application can start sending notifications */
AltitudeNotificationEnabled = WriteRequestedParameter->handleValPair.value.val[CYBLE_BMP180_ALTITUDE_CLIENT_CHARACTERISTIC_CONFIGURATION_DESC_INDEX];
UpdateAltitudeNotificationAttribute = TRUE; //Set flag to allow CCCD to be updated for next read operation
}
/* Send response to the write command received */
CyBle_GattsWriteRsp(ConnectionHandle);
break;
/**********************************************************
* L2CAP Events
***********************************************************/
case CYBLE_EVT_L2CAP_CONN_PARAM_UPDATE_RSP: //This event is generated when the L2CAP connection parameter update response received
ConnectionParametersUpdateRequired = FALSE; //Clear the Connection Parameters Update flag
break;
default:
break;
}
}
