/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID RTUSBCancelPendingBulkInIRP(
IN PRTMP_ADAPTER pAd)
{
PRX_CONTEXT pRxContext;
PCMD_RSP_CONTEXT pCmdRspEventContext = &pAd->CmdRspEventContext;
UINT i;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
for ( i = 0; i < (RX_RING_SIZE); i++)
{
pRxContext = &(pAd->RxContext[i]);
if(pRxContext->IRPPending == TRUE)
{
RTUSB_UNLINK_URB(pRxContext->pUrb);
pRxContext->IRPPending = FALSE;
pRxContext->InUse = FALSE;
/*NdisInterlockedDecrement(&pAd->PendingRx);*/
/*pAd->PendingRx--;*/
}
}
if (pCmdRspEventContext->IRPPending == TRUE)
{
printk("unlink cmd rsp urb\n");
RTUSB_UNLINK_URB(pCmdRspEventContext->pUrb);
pCmdRspEventContext->IRPPending = FALSE;
pCmdRspEventContext->InUse = FALSE;
}
DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
VOID RTUSBRejectPendingPackets(
IN PRTMP_ADAPTER pAd)
{
UCHAR Index;
PQUEUE_ENTRY pEntry;
PNDIS_PACKET pPacket;
PQUEUE_HEADER pQueue;
#ifdef RELEASE_EXCLUDE
DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //
for (Index = 0; Index < 4; Index++)
{
NdisAcquireSpinLock(&pAd->TxSwQueueLock[Index]);
while (pAd->TxSwQueue[Index].Head != NULL)
{
pQueue = (PQUEUE_HEADER) &(pAd->TxSwQueue[Index]);
pEntry = RemoveHeadQueue(pQueue);
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
}
NdisReleaseSpinLock(&pAd->TxSwQueueLock[Index]);
}
#ifdef RELEASE_EXCLUDE
DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //
}
VOID DBGPRINT_RX_RING(
IN PRTMP_ADAPTER pAd)
{
UINT32 Ac0Base;
UINT32 Ac0HwIdx = 0, Ac0SwIdx = 0, AC0freeIdx;
int i;
UINT32 *ptemp;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("=====================================================\n " ));
RTMP_IO_READ32(pAd, RX_BASE_PTR, &Ac0Base);
RTMP_IO_READ32(pAd, RX_CRX_IDX, &Ac0SwIdx);
RTMP_IO_READ32(pAd, RX_DRX_IDX, &Ac0HwIdx);
AC0freeIdx = pAd->RxRing.RxSwReadIdx;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("All RX DSP \n " ));
for (i=0;i<RX_RING_SIZE;i++)
{
ptemp = (UINT32 *)pAd->RxRing.Cell[i].AllocVa;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d] %08x: %08x: %08x: %08x\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
}
DBGPRINT(RT_DEBUG_TRACE,("RxRing, RX_DRX_IDX=%d, RX_CRX_IDX=%d \n", Ac0HwIdx, Ac0SwIdx));
DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx));
DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
}
static BOOLEAN USBDevConfigInit(
IN struct usb_device *dev,
IN struct usb_interface *intf,
IN VOID *pAd)
{
struct usb_interface_descriptor *iface_desc;
struct usb_endpoint_descriptor *endpoint;
ULONG BulkOutIdx;
UINT32 i;
RT_CMD_USB_DEV_CONFIG Config, *pConfig = &Config;
iface_desc = &intf->altsetting[0];
/* get # of enpoints */
pConfig->NumberOfPipes = iface_desc->bNumEndpoints;
DBGPRINT(RT_DEBUG_TRACE, ("NumEndpoints=%d\n", iface_desc->bNumEndpoints));
/* Configure Pipes */
endpoint = &iface_desc->endpoint[0];
BulkOutIdx = 0;
for(i=0; i<pConfig->NumberOfPipes; i++)
{
if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN))
{
pConfig->BulkInEpAddr = endpoint[i].bEndpointAddress;
pConfig->BulkInMaxPacketSize = endpoint[i].wMaxPacketSize;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("BULK IN MaximumPacketSize = %d\n", pConfig->BulkInMaxPacketSize));
DBGPRINT_RAW(RT_DEBUG_TRACE, ("EP address = 0x%2x \n", endpoint[i].bEndpointAddress));
}
else if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT))
{
/* There are 6 bulk out EP. EP6 highest priority. */
/* EP1-4 is EDCA. EP5 is HCCA. */
pConfig->BulkOutEpAddr[BulkOutIdx++] = endpoint[i].bEndpointAddress;
pConfig->BulkOutMaxPacketSize = endpoint[i].wMaxPacketSize;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("BULK OUT MaximumPacketSize = %d\n", pConfig->BulkOutMaxPacketSize));
DBGPRINT_RAW(RT_DEBUG_TRACE, ("EP address = 0x%2x \n", endpoint[i].bEndpointAddress));
}
}
if (!(pConfig->BulkInEpAddr && pConfig->BulkOutEpAddr[0]))
{
printk("Could not find both bulk-in and bulk-out endpoints\n");
return FALSE;
}
pConfig->pConfig = dev->config;
RTMP_DRIVER_USB_CONFIG_INIT(pAd, pConfig);
RT28XXVendorSpecificCheck(dev, pAd);
return TRUE;
}
/*
Antenna divesity use GPIO3 and EESK pin for control
Antenna and EEPROM access are both using EESK pin,
Therefor we should avoid accessing EESK at the same time
Then restore antenna after EEPROM access
The original name of this function is AsicSetRxAnt(), now change to
*/
VOID RT30xxSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant)
{
UINT32 Value;
if (/*(!pAd->NicConfig2.field.AntDiversity) ||*/
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return;
}
/* the antenna selection is through firmware and MAC register(GPIO3) */
if (IS_RT2070(pAd) || (IS_RT3070(pAd) && pAd->RfIcType == RFIC_3020) ||
(IS_RT3090(pAd) && pAd->RfIcType == RFIC_3020))
{
if (Ant == 0)
{
/*
Main antenna
E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
*/
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0, FALSE);
#endif /* RTMP_MAC_USB */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
}
else
{
/*
Aux antenna
E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
*/
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0, FALSE);
#endif /* RTMP_MAC_USB */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
}
}
}
// RTS frame use BulkOutPipeId = PipeID
VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
{
PRTMP_ADAPTER pAd;
PTX_CONTEXT pRTSContext;
NTSTATUS status;
unsigned long IrqFlags;
pRTSContext= (PTX_CONTEXT)pUrb->context;
pAd = pRTSContext->pAd;
DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutRTSFrameComplete\n");
// Reset RTS frame context flags
pRTSContext->IRPPending = FALSE;
pRTSContext->InUse = FALSE;
status = pUrb->status;
if (status == USB_ST_NOERROR)
{
// Don't worry about the queue is empty or not, this function will check itself
RTMPDeQueuePacket(pAd, pRTSContext->BulkOutPipeId);
}
#if 1 // STATUS_OTHER
else
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, "Bulk Out RTS Frame Failed\n");
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
RTUSBEnqueueInternalCmd(pAd, RT_OID_USB_RESET_BULK_OUT);
}
}
#endif
NdisAcquireSpinLock(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
NdisReleaseSpinLock(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);
// Always call Bulk routine, even reset bulk.
// The protectioon of rest bulk should be in BulkOut routine
RTUSBKickBulkOut(pAd);
DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutRTSFrameComplete\n");
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID RTUSBBulkOutRTSFrame(
IN PRTMP_ADAPTER pAd)
{
PTX_CONTEXT pRTSContext = &(pAd->RTSContext);
PURB pUrb;
int ret = 0;
unsigned long IrqFlags;
UCHAR PipeID=0;
if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_4))
PipeID= 3;
else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_3))
PipeID= 2;
else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_2))
PipeID= 1;
else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL))
PipeID= 0;
NdisAcquireSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);
if (pAd->BulkOutPending[PipeID] == TRUE)
{
NdisReleaseSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);
return;
}
pAd->BulkOutPending[PipeID] = TRUE;
NdisReleaseSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);
// Increase Total transmit byte counter
pAd->RalinkCounters.TransmittedByteCount += pRTSContext->BulkOutSize;
DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutRTSFrame \n");
// Clear RTS frame bulk flag
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_RTS);
// Init Tx context descriptor
RTUSBInitTxDesc(pAd, pRTSContext, PipeID, RTUSBBulkOutRTSFrameComplete);
pRTSContext->IRPPending = TRUE;
pUrb = pRTSContext->pUrb;
if((ret = rtusb_submit_urb(pUrb))!=0)
{
DBGPRINT(RT_DEBUG_ERROR,"Submit Tx URB failed %d\n", ret);
return;
}
DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutRTSFrame \n");
return;
}
// Antenna divesity use GPIO3 and EESK pin for control
// Antenna and EEPROM access are both using EESK pin,
// Therefor we should avoid accessing EESK at the same time
// Then restore antenna after EEPROM access
// The original name of this function is AsicSetRxAnt(), now change to
//VOID AsicSetRxAnt(
VOID RT30xxSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant)
{
UINT32 Value;
#ifdef RTMP_MAC_PCI
UINT32 x;
#endif // RTMP_MAC_PCI //
if ((pAd->EepromAccess) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return;
}
// the antenna selection is through firmware and MAC register(GPIO3)
if (Ant == 0)
{
// Main antenna
// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x |= (EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#endif // RTMP_MAC_PCI //
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
}
else
{
// Aux antenna
// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#endif // RTMP_MAC_PCI //
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
}
}
static void rtusb_hcca_dma_done_tasklet(unsigned long data)
{
PRTMP_ADAPTER pAd;
PHT_TX_CONTEXT pHTTXContext;
UCHAR BulkOutPipeId = 4;
purbb_t pUrb;
DBGPRINT_RAW(RT_DEBUG_ERROR, ("--->hcca_dma_done_tasklet\n"));
pUrb = (purbb_t)data;
/* pHTTXContext = (PHT_TX_CONTEXT)pUrb->context; */
pHTTXContext = (PHT_TX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
pAd = pHTTXContext->pAd;
rtusb_dataout_complete((unsigned long)pUrb);
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST))))
{
/* do nothing and return directly. */
}
else
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
{
RTEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
}
else
{ pHTTXContext = &pAd->TxContext[BulkOutPipeId];
if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
(pHTTXContext->bCurWriting == FALSE))
{
RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
}
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL);
RTUSBKickBulkOut(pAd);
}
}
DBGPRINT_RAW(RT_DEBUG_ERROR, ("<---hcca_dma_done_tasklet\n"));
return;
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note: MLME use BulkOutPipeId = 0
========================================================================
*/
VOID RTUSBBulkOutMLMEPacket(
IN PRTMP_ADAPTER pAd,
IN UCHAR Index)
{
PTX_CONTEXT pMLMEContext;
PURB pUrb;
int ret = 0;
unsigned long IrqFlags;
pMLMEContext = &pAd->MLMEContext[Index];
NdisAcquireSpinLock(&pAd->BulkOutLock[0], IrqFlags);
if (pAd->BulkOutPending[0] == TRUE)
{
NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);
return;
}
pAd->BulkOutPending[0] = TRUE;
NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);
// Increase Total transmit byte counter
pAd->RalinkCounters.TransmittedByteCount += pMLMEContext->BulkOutSize;
// Clear MLME bulk flag
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
DBGPRINT_RAW(RT_DEBUG_INFO, "RTUSBBulkOutMLMEPacket::PrioRingFirstIndex = %d, PrioRingTxCnt = %d, PopMgmtIndex = %d, PushMgmtIndex = %d, NextMLMEIndex = %d\n",
pAd->PrioRingFirstIndex,
pAd->PrioRingTxCnt, pAd->PopMgmtIndex, pAd->PushMgmtIndex, pAd->NextMLMEIndex);
DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutMLMEPacket\n");
// Init Tx context descriptor
RTUSBInitTxDesc(pAd, pMLMEContext, 0, RTUSBBulkOutMLMEPacketComplete);
pMLMEContext->IRPPending = TRUE;
pUrb = pMLMEContext->pUrb;
if((ret = rtusb_submit_urb(pUrb))!=0)
{
DBGPRINT(RT_DEBUG_ERROR,"Submit MLME URB failed %d\n", ret);
return;
}
DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutMLMEPacket \n");
return;
}
/*
========================================================================
Routine Description: Write RF register through MAC
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
NTSTATUS RTUSBWriteRFRegister(
IN PRTMP_ADAPTER pAd,
IN UINT32 Value)
{
PHY_CSR4_STRUC PhyCsr4;
UINT i = 0;
NTSTATUS status;
NdisZeroMemory(&PhyCsr4, sizeof(PHY_CSR4_STRUC));
do
{
status = RTUSBReadMACRegister(pAd, RF_CSR_CFG0, &PhyCsr4.word);
if (status >= 0)
{
if (!(PhyCsr4.field.Busy))
break;
}
printk("RTUSBWriteRFRegister(RF_CSR_CFG0):retry count=%d!\n", i);
i++;
}
while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
RTUSBWriteMACRegister(pAd, RF_CSR_CFG0, Value);
return STATUS_SUCCESS;
}
static inline BOOLEAN rf_csr_poll_idle(RTMP_ADAPTER *pAd, UINT32 *rfcsr)
{
RF_CSR_CFG_STRUC *csr_val;
BOOLEAN idle = BUSY;
INT i = 0;
do
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
break;
RTMP_IO_READ32(pAd, RF_CSR_CFG, rfcsr);
csr_val = (RF_CSR_CFG_STRUC *)rfcsr;
#ifdef RT65xx
if (IS_RT65XX(pAd))
idle = csr_val->bank_65xx.RF_CSR_KICK;
else
#endif /* RT65xx */
idle = csr_val->non_bank.RF_CSR_KICK;
if (idle == IDLE)
break;
i++;
} while (i < MAX_BUSY_COUNT);
if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed(cnt=%d)!\n", i));
}
return idle;
}
NDIS_STATUS RT30xxWriteRFRegister(
IN PRTMP_ADAPTER pAd,
IN UCHAR regID,
IN UCHAR value)
{
RF_CSR_CFG_STRUC rfcsr;
UINT i = 0;
do
{
RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
if (!rfcsr.field.RF_CSR_KICK)
break;
i++;
}
while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
rfcsr.field.RF_CSR_WR = 1;
rfcsr.field.RF_CSR_KICK = 1;
rfcsr.field.TESTCSR_RFACC_REGNUM = regID;
rfcsr.field.RF_CSR_DATA = value;
RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
return NDIS_STATUS_SUCCESS;
}
/*void AsicSetRxAnt( */
void RT30xxSetRxAnt(struct rt_rtmp_adapter *pAd, u8 Ant)
{
u32 Value;
#ifdef RTMP_MAC_PCI
u32 x;
#endif
if ((pAd->EepromAccess) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
return;
}
/* the antenna selection is through firmware and MAC register(GPIO3) */
if (Ant == 0) {
/* Main antenna */
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x |= (EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0);
#endif /* RTMP_MAC_PCI // */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE,
("AsicSetRxAnt, switch to main antenna\n"));
} else {
/* Aux antenna */
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0);
#endif /* RTMP_MAC_PCI // */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE,
("AsicSetRxAnt, switch to aux antenna\n"));
}
}
NTSTATUS RTUSBVenderReset(RTMP_ADAPTER *pAd)
{
NTSTATUS Status;
DBGPRINT_RAW(RT_DEBUG_ERROR, ("-->RTUSBVenderReset\n"));
Status = RTUSB_VendorRequest(
pAd,
USBD_TRANSFER_DIRECTION_OUT,
DEVICE_VENDOR_REQUEST_OUT,
0x01,
0x1,
0,
NULL,
0);
DBGPRINT_RAW(RT_DEBUG_ERROR, ("<--RTUSBVenderReset\n"));
return Status;
}
/*
========================================================================
Routine Description: Write RT30xx RF register through MAC
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
NDIS_STATUS RT30xxWriteRFRegister(
IN PRTMP_ADAPTER pAd,
IN UCHAR regID,
IN UCHAR value)
{
RF_CSR_CFG_STRUC rfcsr = { { 0 } };
UINT i = 0;
ASSERT((regID <= pAd->chipCap.MaxNumOfRfId));
do
{
RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
if (!rfcsr.field.RF_CSR_KICK)
break;
i++;
}
while ((i < MAX_BUSY_COUNT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
rfcsr.field.RF_CSR_WR = 1;
rfcsr.field.RF_CSR_KICK = 1;
rfcsr.field.TESTCSR_RFACC_REGNUM = regID;
if ((pAd->chipCap.RfReg17WtMethod == RF_REG_WT_METHOD_STEP_ON) && (regID == RF_R17))
{
UCHAR IdRf;
UCHAR RfValue;
BOOLEAN beAdd;
RT30xxReadRFRegister(pAd, RF_R17, &RfValue);
beAdd = (RfValue < value) ? TRUE : FALSE;
IdRf = RfValue;
while(IdRf != value)
{
if (beAdd)
IdRf++;
else
IdRf--;
rfcsr.field.RF_CSR_DATA = IdRf;
RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
RtmpOsMsDelay(1);
}
}
rfcsr.field.RF_CSR_DATA = value;
RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
return NDIS_STATUS_SUCCESS;
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
void RTUSBCancelPendingBulkInIRP(struct rt_rtmp_adapter *pAd)
{
struct rt_rx_context *pRxContext;
u32 i;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
for (i = 0; i < (RX_RING_SIZE); i++) {
pRxContext = &(pAd->RxContext[i]);
if (pRxContext->IRPPending == TRUE) {
RTUSB_UNLINK_URB(pRxContext->pUrb);
pRxContext->IRPPending = FALSE;
pRxContext->InUse = FALSE;
/*NdisInterlockedDecrement(&pAd->PendingRx); */
/*pAd->PendingRx--; */
}
}
DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
}
/*
========================================================================
Routine Description:
Creates an IRP to submite an IOCTL_INTERNAL_USB_RESET_PORT
synchronously. Callers of this function must be running at
PASSIVE LEVEL.
Arguments:
Return Value:
Note:
========================================================================
*/
NTSTATUS RTUSB_ResetDevice(
IN PRTMP_ADAPTER pAd)
{
NTSTATUS Status = TRUE;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->USB_ResetDevice\n"));
//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
return Status;
}
VOID RT33xxSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant)
{
UINT32 Value;
UINT32 x;
if ((!pAd->NicConfig2.field.AntDiversity) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return;
}
// the antenna selection is through firmware and MAC register(GPIO3)
if (Ant == 0)
{
// Main antenna
// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x73, 0xff, 0x1, 0x0);
#endif // RTMP_MAC_USB //
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
}
else
{
// Aux antenna
// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x73, 0xff, 0x0, 0x0);
#endif // RTMP_MAC_USB //
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
}
}
VOID ATE_RTUSBBulkOutDataPacket(
IN PRTMP_ADAPTER pAd)
{
PTX_CONTEXT pNullContext = &(pAd->NullContext);
PURB pUrb;
int ret = 0;
unsigned long IrqFlags;
ATE_RTMPSendNullFrame(pAd);
DBGPRINT_RAW(RT_DEBUG_INFO, "--->ATE_RTUSBBulkOutDataPacket \n");
NdisAcquireSpinLock(&pAd->BulkOutLock[0], IrqFlags);
if (pAd->BulkOutPending[0] == TRUE)
{
DBGPRINT_RAW(RT_DEBUG_INFO, "--->ATE_RTUSBBulkOutDataPacket BulkOutPending \n");
NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);
return;
}
pAd->BulkOutPending[0] = TRUE;
NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);
// Increase Total transmit byte counter
pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize;
DBGPRINT_RAW(RT_DEBUG_INFO, "--->ATE_RTUSBBulkOutDataPacket \n");
// Clear Null frame bulk flag
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
// Init Tx context descriptor
RTUSBInitTxDesc(pAd, pNullContext, 0, ATE_RTUSBBulkOutDataPacketComplete);
pNullContext->IRPPending = TRUE;
pUrb = pNullContext->pUrb;
if((ret = rtusb_submit_urb(pUrb))!=0)
{
DBGPRINT(RT_DEBUG_ERROR,"Submit Tx URB failed %d\n", ret);
return;
}
DBGPRINT_RAW(RT_DEBUG_INFO, "<---ATE_RTUSBBulkOutDataPacket \n");
return;
}
VOID RT33xxSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant)
{
UINT32 Value;
UINT32 x;
if ((pAd->EepromAccess) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return;
}
// the antenna selection is through firmware and MAC register(GPIO3)
if (Ant == 0)
{
// Main antenna
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x |= (EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
}
else
{
// Aux antenna
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
}
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
VOID RTUSBPutToSleep(RTMP_ADAPTER *pAd)
{
UINT32 value;
/* Timeout 0x40 x 50us*/
value = (SLEEPCID<<16)+(OWNERMCU<<24)+ (0x40<<8)+1;
RTUSBWriteMACRegister(pAd, 0x7010, value, FALSE);
RTUSBWriteMACRegister(pAd, 0x404, 0x30, FALSE);
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value));
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID RTUSBCancelPendingBulkInIRP(
IN PRTMP_ADAPTER pAd)
{
PRX_CONTEXT pRxContext;
UINT i;
DBGPRINT_RAW(RT_DEBUG_TRACE,"--->RTUSBCancelPendingBulkInIRP\n");
for ( i = 0; i < RX_RING_SIZE; i++)
{
pRxContext = &(pAd->RxContext[i]);
if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE)
{
RTUSB_UNLINK_URB(pRxContext->pUrb);
}
atomic_set(&pRxContext->IrpLock, IRPLOCK_CANCE_START);
}
DBGPRINT_RAW(RT_DEBUG_TRACE,"<---RTUSBCancelPendingBulkInIRP\n");
}
NDIS_STATUS RT635xWriteRFRegister(
IN PRTMP_ADAPTER pAd,
IN UCHAR bank,
IN UCHAR regID,
IN UCHAR value)
{
RF_CSR_CFG_STRUC rfcsr = { { 0 } };
UINT i = 0;
NDIS_STATUS ret;
#ifdef RTMP_MAC_PCI
if ((pAd->bPCIclkOff == TRUE) || (pAd->LastMCUCmd == SLEEP_MCU_CMD))
{
DBGPRINT_ERR(("RT635xWriteRFRegister. Not allow to write RF 0x%x : fail\n", regID));
return STATUS_UNSUCCESSFUL;
}
#endif /* RTMP_MAC_PCI */
ASSERT((regID <= pAd->chipCap.MaxNumOfRfId));
if (regID > pAd->chipCap.MaxNumOfRfId)
{
DBGPRINT(RT_DEBUG_ERROR, ("RegID=%d, pAd->chipCap.MaxNumOfRfId=%d\n", regID, pAd->chipCap.MaxNumOfRfId));
}
ret = STATUS_UNSUCCESSFUL;
do
{
RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
if (!rfcsr.bank_6352.RF_CSR_KICK)
break;
i++;
}
while ((i < MAX_BUSY_COUNT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
goto done;
}
rfcsr.bank_6352.RF_CSR_WR = 1;
rfcsr.bank_6352.RF_CSR_KICK = 1;
rfcsr.bank_6352.TESTCSR_RFACC_REGNUM = (regID | (bank << 6));
rfcsr.bank_6352.RF_CSR_DATA = value;
RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
ret = NDIS_STATUS_SUCCESS;
done:
return ret;
}
/*
========================================================================
Routine Description: Write RT30xx RF register through MAC
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
NDIS_STATUS RT30xxWriteRFRegister(
IN PRTMP_ADAPTER pAd,
IN UCHAR regID,
IN UCHAR value)
{
RF_CSR_CFG_STRUC rfcsr = { { 0 } };
UINT i = 0;
#ifdef RTMP_MAC_PCI
if ((pAd->bPCIclkOff == TRUE) || (pAd->LastMCUCmd == SLEEP_MCU_CMD))
{
DBGPRINT_ERR(("RT30xxWriteRFRegister. Not allow to write RF 0x%x : fail\n", regID));
return STATUS_UNSUCCESSFUL;
}
#endif // RTMP_MAC_PCI //
{
if (IS_RT3883(pAd))
{
ASSERT((regID <= 63)); // R0~R63
}
else
{
ASSERT((regID <= 31)); // R0~R31
}
do
{
RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
if (!rfcsr.field.RF_CSR_KICK)
break;
i++;
}
while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
rfcsr.field.RF_CSR_WR = 1;
rfcsr.field.RF_CSR_KICK = 1;
rfcsr.field.TESTCSR_RFACC_REGNUM = regID; // R0~R31
rfcsr.field.RF_CSR_DATA = value;
RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
}
return NDIS_STATUS_SUCCESS;
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID RTUSBCancelPendingBulkInIRP(
IN PRTMP_ADAPTER pAd)
{
PRX_CONTEXT pRxContext;
UINT i;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
for ( i = 0; i < (RX_RING_SIZE); i++)
{
pRxContext = &(pAd->RxContext[i]);
if(pRxContext->IRPPending == TRUE)
{
RTUSB_UNLINK_URB(pRxContext->pUrb);
pRxContext->IRPPending = FALSE;
pRxContext->InUse = FALSE;
//NdisInterlockedDecrement(&pAd->PendingRx);
//pAd->PendingRx--;
}
}
DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
}
static void rtusb_null_frame_done_tasklet(unsigned long data)
{
PRTMP_ADAPTER pAd;
PTX_CONTEXT pNullContext;
purbb_t pUrb;
NTSTATUS Status;
unsigned long irqFlag;
pUrb = (purbb_t)data;
/* pNullContext = (PTX_CONTEXT)pUrb->context; */
pNullContext = (PTX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
Status = RTMP_USB_URB_STATUS_GET(pUrb);
pAd = pNullContext->pAd;
/* Status = pUrb->status; */
/* Reset Null frame context flags */
RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
pNullContext->IRPPending = FALSE;
pNullContext->InUse = FALSE;
pAd->BulkOutPending[0] = FALSE;
pAd->watchDogTxPendingCnt[0] = 0;
if (Status == USB_ST_NOERROR)
{
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
}
else /* STATUS_OTHER */
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out Null Frame Failed, ReasonCode=%d!\n", Status));
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
}
else
{
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
}
}
/* Always call Bulk routine, even reset bulk. */
/* The protectioon of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
int mt_rf_read(
RTMP_ADAPTER *ad,
u8 rf_idx,
u16 offset,
u32 *data)
{
u32 i = 0;
u32 value;
int ret;
/* rf control */
RTMP_IO_READ32(ad, RF_CTRL, &value);
/* rf address */
value &= ~RF_ADDR_MASK;
value |= RF_ADDR(offset);
/* read control */
value &= ~RF_R_W_CTRL;
/* rf index */
value &= ~RF_IDX_MASK;
value |= RF_IDX(rf_idx);
RTMP_IO_WRITE32(ad, RF_CTRL, value);
do {
RTMP_IO_READ32(ad, RF_CTRL, &value);
if (RF_READY(value))
break;
i++;
//RtmpOsMsDelay(1);
RtmpusecDelay(50);
//} while ((i < MAX_BUSY_COUNT) && (!RTMP_TEST_FLAG(ad, fRTMP_ADAPTER_NIC_NOT_EXIST)));
} while ((i < MAX_BUSY_COUNT_US) && (!RTMP_TEST_FLAG(ad, fRTMP_ADAPTER_NIC_NOT_EXIST)));
//if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(ad, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
if ((i == MAX_BUSY_COUNT_US) || (RTMP_TEST_FLAG(ad, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
ret = STATUS_UNSUCCESSFUL;
goto done;
}
/* rf data */
RTMP_IO_READ32(ad, R_RFDATA, data);
done:
return ret;
}
static void rt2870_rts_frame_complete_tasklet(unsigned long data)
{
PRTMP_ADAPTER pAd;
PTX_CONTEXT pRTSContext;
purbb_t pUrb;
NTSTATUS Status;
unsigned long irqFlag;
pUrb = (purbb_t)data;
pRTSContext = (PTX_CONTEXT)pUrb->context;
pAd = pRTSContext->pAd;
Status = pUrb->status;
// Reset RTS frame context flags
RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
pRTSContext->IRPPending = FALSE;
pRTSContext->InUse = FALSE;
if (Status == USB_ST_NOERROR)
{
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
}
else // STATUS_OTHER
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
{
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out RTS Frame Failed\n"));
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
}
else
{
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
}
}
RTMP_SEM_LOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
// Always call Bulk routine, even reset bulk.
// The protectioon of rest bulk should be in BulkOut routine
RTUSBKickBulkOut(pAd);
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
IRQL =
Note:
========================================================================
*/
VOID RTUSBPutToSleep(
IN PRTMP_ADAPTER pAd)
{
UINT32 value;
// Timeout 0x40 x 50us
value = (SLEEPCID<<16)+(OWNERMCU<<24)+ (0x40<<8)+1;
RTUSBWriteMACRegister(pAd, 0x7010, value);
RTUSBWriteMACRegister(pAd, 0x404, 0x30);
//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value));
}