static void gsm_thread_entry(void* parameter)
{
rt_size_t res=RT_ERROR;
u8 linkNum=0;
// finsh_init(&shell->parser);
rt_kprintf("\r\n ---> gsm thread start !\r\n");
//
while (1)
{
// 1. after power on get imsi code
IMSIcode_Get();
// 2. after get imsi Comm AT initial start
GSM_Module_TotalInitial();
// 3. Receivce & Process Communication Module data ----
GSM_Buffer_Read_Process();
if(!SMS_send_stateQuery())
{
DataLink_Process();
//------------------------------------------------
if (Send_DataFlag== 1)
{
// rt_kprintf("\r\n gsm rx app msgQue: rxlen=%d rx_content=%s\r\n",msgq_gsm.len,msgq_gsm.info);
// Data_Send(GPRS_info,GPRS_infoWr_Tx);
res=rt_device_control(&Device_GSM, query_online, NULL);
if(res==RT_EOK)
{
linkNum=gsm_rx_app_infoStruct.link_num; // IC link ==1
rt_device_write(&Device_GSM, linkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx);
}
Send_DataFlag=0;
}
//--------- Step timer
Dial_step_Single_10ms_timer();
// TTS
TTS_Data_Play();
// Get CSQ value
// GSM_CSQ_Query(); // SMS Send
}
else
SMS_send_process(); // 相关短信处理
// Get CSQ value
GSM_CSQ_Query();
// Voice Record
VOC_REC_process();
rt_thread_delay(20);
}
}
static void gsm_thread_entry(void* parameter)
{
u8 atd_str[25];
rt_size_t res=RT_ERROR;
// finsh_init(&shell->parser);
//
// step 1: Init Dataflash
DF_init();
APP_IOpinInit();
rt_kprintf("\r\n ---> gsm thread start !\r\n");
HardWareVerion=HardWareGet();
// step 2: process config data
SysConfiguration(); // system config
total_ergotic();
Gsm_RegisterInit(); // init register states ,then it will power on the module
SIMID_Convert_SIMCODE(); // translate
#ifdef HMI
HMI_app_init();
#endif
gps_init();
//--------------------------------------
while (1)
{
if(GSM_Working_State())
{
// 1. after power on get imsi code
IMSIcode_Get();
// 2. after get imsi Comm AT initial start
GSM_Module_TotalInitial();
// 3. Receivce & Process Communication Module data ----
GSM_Buffer_Read_Process();
}
rt_thread_delay(20);
if(GSM_Working_State()==2)
{
DataLink_Process();
//------------------------------------------------
if (Send_DataFlag== 1)
{
res=rt_device_control(&Device_GSM, query_online, NULL);
if(res==RT_EOK)
rt_device_write(&Device_GSM, LinkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx);
Send_DataFlag=0;
}
//监听
if(CallState==CallState_rdytoDialLis)
{
CallState=CallState_Dialing;
memset(atd_str,0,sizeof(atd_str));
memcpy(atd_str,"ATD",3);
memcpy(atd_str+3,JT808Conf_struct.LISTEN_Num,strlen((const char*)JT808Conf_struct.LISTEN_Num));
memcpy(atd_str+3+strlen((const char*)JT808Conf_struct.LISTEN_Num),";\r\n",3);
rt_hw_gsm_output(atd_str);
rt_kprintf("\r\n拨打%s\r\n",atd_str);
}
//--------- Step timer
// Dial_step_Single_10ms_timer();
// TTS
TTS_Data_Play();
// Get CSQ value
if(GSM_CSQ_Query()==false)
{
if(Calling_ATA_flag==1)
{
rt_thread_delay(3);
rt_hw_gsm_output("ATA\r\n"); //检查信号强度
if(DispContent)
rt_kprintf(" 接听 ATA\r\n");
Calling_ATA_flag=0;
}
}
// SMS Service
SMS_Process();
rt_thread_delay(10);
}
}
}
static void gsm_thread_entry(void* parameter)
{
u8 atd_str[25];
rt_size_t res=RT_ERROR;
// finsh_init(&shell->parser);
//
// step 1: Init Dataflash
DF_init();
APP_IOpinInit();
rt_kprintf("\r\n ---> gsm thread start !\r\n");
HardWareVerion=HardWareGet();
// step 2: process config data
SysConfiguration(); // system config
total_ergotic();
Gsm_RegisterInit(); // init register states ,then it will power on the module
SIMID_Convert_SIMCODE(); // translate
#ifdef HMI
HMI_app_init();
#endif
gps_init();
Lcd_init();
//--------------------------------------
while (1)
{
if((GSM_PWR.result==result_success)&&(dwlcd_contr<=5))
{
if(Login_Menu_Flag!=1)
{
Lcd_write(Big_lcd.status,LCD_PAGE,0x15);
dwlcd_contr++;
}
else
{
Lcd_write(Big_lcd.status,LCD_PAGE,0x01);
dwlcd_contr++;
}
;
}
// 1. after power on get imsi code
IMSIcode_Get();
// 2. after get imsi Comm AT initial start
GSM_Module_TotalInitial();
// 3. Receivce & Process Communication Module data ----
GSM_Buffer_Read_Process();
rt_thread_delay(20);
DataLink_Process();
//++++++++++++++++++++++++DWLCD+++++++++++++++++++++
//_485_RxHandler_01();
if(Big_lcd.RX_enable==LCD_BUSY)
{
Lcd_Data_Process();
Big_lcd.RX_enable=LCD_IDLE;
}
/*
Lcd_write(Big_lcd.status,LCD_SETSPD,0);
Lcd_write(Big_lcd.status,LCD_GPSNUM,Satelite_num);
Lcd_write(Big_lcd.status,LCD_GSMNUM,ModuleSQ);
*/
if(ModuleStatus&Status_GPS )
{
if(Big_lcd.RX_enable==LCD_IDLE)
{
if(lcd_contrl==0)
{
Lcd_write(Big_lcd.status,LCD_SETTIME,0);
delay_ms(5);
lcd_contrl++;
}
}
}
//++++++++++++++++++++++++DWLCD+++++++++++++++++++++
if(BD1_struct.Rx_enable==RT_EOK)
{
BD1_RxProcess();
}
//------------------------------------------------
if (Send_DataFlag== 1)
{
res=rt_device_control(&Device_GSM, query_online, NULL);
if(res==RT_EOK)
rt_device_write(&Device_GSM, LinkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx);
Send_DataFlag=0;
}
//监听
if(CallState==CallState_rdytoDialLis)
{
CallState=CallState_Dialing;
memset(atd_str,0,sizeof(atd_str));
memcpy(atd_str,"ATD",3);
memcpy(atd_str+3,JT808Conf_struct.LISTEN_Num,strlen((const char*)JT808Conf_struct.LISTEN_Num));
memcpy(atd_str+3+strlen((const char*)JT808Conf_struct.LISTEN_Num),";\r\n",3);
rt_hw_gsm_output(atd_str);
rt_kprintf("\r\n拨打%s\r\n",atd_str);
}
//--------- Step timer
// Dial_step_Single_10ms_timer();
// TTS
TTS_Data_Play();
// Get CSQ value
if(GSM_CSQ_Query()==false)
{
if(Calling_ATA_flag==1)
{
delay_ms(10);
rt_hw_gsm_output("ATA\r\n"); //检查信号强度
if(DispContent)
rt_kprintf(" 接听 ATA\r\n");
Calling_ATA_flag=0;
}
}
// SMS Service
SMS_Process();
}
}