int BL_MSDC_Init(void)
{
// enable GPIO for MSDC
#if defined(MT6235) || defined(MT6235B)
DRV_SetBits(0x80021800, 0x5540);
DRV_SetBits(0x80021900, 0x55);
#elif defined(MT6236)
DRV_SetBits(0x801D0610, 0x3); // MCOINS: b'11
DRV_SetBits(0x801D0200, 0xFD00); // GPIO8 PU SEL (b'8)
#elif defined(MT6253)
DRV_SetBits(0x80020210, 0x5554);
#elif defined(MT6252)
//
// Patch the offset and arguments. The macro only can read/write 16bit data.
//
//DRV_ClearBits(0x800201D0, 0xFFFF0000);
//DRV_SetBits(0x800201D0, 0x11110000);
DRV_ClearBits(0x800201D2, 0xFFFF);
DRV_SetBits(0x800201D2, 0x1111);
#elif defined(MT6268)
DRV_ClearBits(0x84021A00, 0xFF00);
DRV_SetBits(0x84021A00, 0x5500);
#elif defined(MT6276_S01)
DRV_ClearBits(0x810A2200, 0x7FC0);
DRV_SetBits(0x810A2200, 0x1240);
DRV_ClearBits(0x810A2300, 0x0FFF);
DRV_SetBits(0x810A2300, 0x0249);
#elif defined(MT6276_S00)
#error Not support MT6276 E1!
#elif defined(MT6251_S01)
DRV_ClearBits(0x80020200, 0x0FFF);
DRV_SetBits(0x80020200, 0x0111);
#elif defined(MT6251_S00)
#error Not support MT6251 E1!
#elif defined(MT6255)
DRV_ClearBits(0x801D0750, 0x00F0);
#elif defined(MT6250)
DRV_ClearBits(0xA0020c32, 0xFF00);
DRV_SetBits(0xA0020c32, 0x1100); // CLK and DAT0
DRV_ClearBits(0xA0020c40, 0x000F);
DRV_SetBits(0xA0020c40, 0x0001); // CMD
#endif
DclSD_Initialize();
//MSDC_Initialize();
return 0;
}
DRV_STATUS_CODE DRV_SD_Init(void)
{
#if (defined(__UBL__) || defined(__FUE__)) && defined(MT6256_S00)
// enable GPIO for MSDC
DRV_WriteReg16(0x701D0610, 0x1110);
DRV_WriteReg16(0x701D0620, 0x0111);
// enable GPT3
DRV_WriteReg32(0x7007001C, 1);
#endif
#if !defined(DCL_MSDC_INTERFACE)
MSDC_Initialize();
#else
DclSD_Initialize();
#endif//!defined(DCL_MSDC_INTERFACE)
return DRV_SUCCESS;
}
/*
* FUNCTION
* Drv_Init_Phase2
*
* DESCRIPTION
* This function is the NFB phase2 (Secondary ROM) initial function for
* all device drivers.
* This function is called once to initialize the device driver.
*
* CALLS
*
* PARAMETERS
* None
*
* RETURNS
* None
*
* GLOBALS AFFECTED
* external_global
*
* NOTE XXX
* All sub functions reference by this function should be placed on
* Secondary ROM for NFB projects.
*/
void Drv_Init_Phase2(void)
{
DCL_HANDLE uart_handle;
#ifdef __USB_COM_PORT_ENABLE__
DCL_CTRL_DATA_T data;
#endif /*__USB_COM_PORT_ENABLE__*/
#ifndef DRV_RTC_NOT_EXIST
DCL_HANDLE rtc_handler;
#endif /*DRV_RTC_NOT_EXIST*/
#if defined(IC_BURNIN_TEST) || defined(DRV_MISC_GPT1_AS_OS_TICK)
/*AB: Enable GPT1 for OS tick in the burn-in test load*/
extern void GPT_init(kal_uint8 timerNum, void (*GPT_Callback)(void));
extern void GPT_ResetTimer(kal_uint8 timerNum,kal_uint16 countValue,kal_bool autoReload);
extern void GPT_Start(kal_uint8 timerNum);
GPT_init(1, INT_Timer_Interrupt);
GPT_ResetTimer(1, 4, KAL_TRUE);
GPT_Start(1);
#endif //IC_BURNIN_TEST
//#ifdef __SWDBG_SUPPORT__
// UART_Register(uart_port_swdbg, UART_TYPE, (UartDriver_strcut *)&swdbgdrv);
//#endif /* __SWDBG_SUPPORT__ */
#ifdef __USB_COM_PORT_ENABLE__
print_bootup_trace_enter(SST_INIT_DRV2_USB2UART);
uart_handle = DclSerialPort_Open(uart_port_usb, 0);
DclSerialPort_RegisterCallback(uart_handle, &USB2Uart_Drv_Handler);
#if defined(__USB_MULTIPLE_COMPORT_SUPPORT__)
uart_handle = DclSerialPort_Open(uart_port_usb2, 0);
DclSerialPort_RegisterCallback(uart_handle, &USB2Uart_Drv_Handler);
#if defined (__USB_MODEM_CARD_SUPPORT__)
uart_handle = DclSerialPort_Open(uart_port_usb3, 0);
DclSerialPort_RegisterCallback(uart_handle, &USB2Uart_Drv_Handler);
#endif
#endif
DclSerialPort_Control(uart_handle,SIO_CMD_INIT,&data);// Initialization
print_bootup_trace_exit(SST_INIT_DRV2_USB2UART);
#endif /*__USB_COM_PORT_ENABLE__*/
//#if defined(__IRDA_SUPPORT__) && !defined(__MEUT__) && !defined(__MEIT__)
/*TY adds this 2004/10/27*/
/* Register UART API */
// UART_Register(uart_port_irda, IRDA_TYPE, &ircomm_uart_api);
//#endif
#if defined(__BTMTK__) && (defined(__BT_SPP_PROFILE__) || defined(__BT_HFG_PROFILE__))
{
kal_uint16 i;
for(i = (kal_uint16)start_of_virtual_port; i < (kal_uint16)end_of_virtual_port + 1; i++)
{
uart_handle = DclSerialPort_Open((DCL_DEV)i, 0);
DclSerialPort_RegisterCallback(uart_handle, &SPPA_Uart_Drv_Handler);
}
}
#elif defined __CMUX_SUPPORT__
{
kal_uint16 i;
for(i = (kal_uint16)start_of_virtual_port; i < (kal_uint16)end_of_virtual_port + 1; i++)
{
uart_handle = DclSerialPort_Open((DCL_DEV)i, 0);
DclSerialPort_RegisterCallback(uart_handle, &CmuxUart_Drv_Handler);
}
}
#endif
#ifndef DRV_KBD_NOT_EXIST
print_bootup_trace_enter(SST_INIT_DRV2_KBD);
DclSKBD_Initialize();
print_bootup_trace_exit(SST_INIT_DRV2_KBD);
#endif /*DRV_KBD_NOT_EXIST*/
#ifndef DRV_RTC_NOT_EXIST
print_bootup_trace_enter(SST_INIT_DRV2_RTCSW);
rtc_handler = DclRTC_Open(DCL_RTC,FLAGS_NONE);
DclRTC_Control(rtc_handler, RTC_CMD_INIT_TC_AL_INTR, (DCL_CTRL_DATA_T *)NULL);
print_bootup_trace_exit(SST_INIT_DRV2_RTCSW);
#endif /*DRV_RTC_NOT_EXIST*/
#ifdef __SIM_DRV_MULTI_DRV_ARCH__
print_bootup_trace_enter(SST_INIT_DRV2_SIM);
DclSIM_Initialize();
print_bootup_trace_exit(SST_INIT_DRV2_SIM);
#endif
#if (defined( DRV_MULTIPLE_SIM) && (!defined(DRV_2_SIM_CONTROLLER)))
print_bootup_trace_enter(SST_INIT_DRV2_SIMMT6302);
sim_MT6302_init();
print_bootup_trace_exit(SST_INIT_DRV2_SIMMT6302);
#endif
#if (defined(__MSDC_MS__) || defined(__MSDC_SD_MMC__) || defined (__MSDC_MSPRO__))
print_bootup_trace_enter(SST_INIT_DRV2_MSDC);
#if !defined(DCL_MSDC_INTERFACE)
MSDC_Initialize();
#else
DclSD_Initialize();
#endif//!defined(DCL_MSDC_INTERFACE)
print_bootup_trace_exit(SST_INIT_DRV2_MSDC);
#if defined(__MSDC2_SD_MMC__) || defined(__MSDC2_SD_SDIO__)
print_bootup_trace_enter(SST_INIT_DRV2_MSDC2);
#if !defined(DCL_MSDC_INTERFACE)
MSDC_Initialize2();
#endif//!defined(DCL_MSDC_INTERFACE)
print_bootup_trace_exit(SST_INIT_DRV2_MSDC2);
#endif//defined(__MSDC2_SD_MMC__) || defined(__MSDC2_SD_SDIO__)
#endif//(defined(__MSDC_MS__) || defined(__MSDC_SD_MMC__) || defined (__MSDC_MSPRO__))
#ifdef IC_MODULE_TEST
IC_ModuleTest_Start();
#endif /*IC_MODULE_TEST*/
print_bootup_trace_enter(SST_INIT_DRV2_EINTSWDBNC);
EINT_SW_Debounce_Init();
print_bootup_trace_exit(SST_INIT_DRV2_EINTSWDBNC);
#ifdef MT6218B/*only 6218B has this */
GCU_Disable_ReverseBit();
#endif
#ifdef __SWDBG_SUPPORT__
/* initialize SWDBG */
print_bootup_trace_enter(SST_INIT_DRV2_SWDBG);
swdbg_init();
print_bootup_trace_exit(SST_INIT_DRV2_SWDBG);
#endif /* __SWDBG_SUPPORT__ */
/* Cipher/Hash engine initialize */
print_bootup_trace_enter(SST_INIT_DRV2_CHE);
che_hw_init();
print_bootup_trace_exit(SST_INIT_DRV2_CHE);
/* ISP/Camera initialize */
#if defined(ISP_SUPPORT)
print_bootup_trace(SST_INIT_DRV2_CIS_ENTER);
#if defined(__MM_DCM_SUPPORT__)
DCM_Load(DYNAMIC_CODE_COMPRESS_CAMCAL, NULL, NULL);
#endif
CalInit();
#if defined(__MM_DCM_SUPPORT__)
DCM_Unload(DYNAMIC_CODE_COMPRESS_CAMCAL);
#endif
print_bootup_trace(SST_INIT_DRV2_CIS_EXIT);
#endif
#ifdef __WIFI_SUPPORT__
print_bootup_trace_enter(SST_INIT_DRV2_WN);
wndrv_HWinit();
print_bootup_trace_exit(SST_INIT_DRV2_WN);
#endif
//#if (defined(_USE_SCCB_V2_DRIVER_))
#if defined(DRV_I2C_25_SERIES)
print_bootup_trace_enter(SST_INIT_DRV2_I2C);
DclSI2C_Initialize();
print_bootup_trace_exit(SST_INIT_DRV2_I2C);
#endif
// PXS is init at phase2 because it is external devices
// Currently, do NOT think it should be put in phase1
#if defined(__PXS_ENABLE__) && !defined(IC_MODULE_TEST) && !defined(IC_BURNIN_TEST)
DclPXS_Initialize();
#endif // #if defined(__PXS_ENABLE__) && !defined(IC_MODULE_TEST) && !defined(IC_BURNIN_TEST)
#if defined(__L1_STANDALONE__)&&defined(__CLKG_DEFINE__)&&!defined(IC_BURNIN_TEST)
mm_disable_power(MMPWRMGR_LCD);
#endif
#ifdef CAS_SMD_SUPPORT
print_bootup_trace_enter(SST_INIT_DRV2_ICC);
DalIccInit();
print_bootup_trace_exit(SST_INIT_DRV2_ICC);
#endif
#if 0 // Init BTIF_HWInit_VFIFO(); in bluetooth module
#if defined(__BTMODULE_MT6236__)
/* under construction !*/
/* under construction !*/
/* under construction !*/
#elif defined(__BTMODULE_MT6256__) || defined(__BTMODULE_MT6276__)
/* under construction !*/
#endif
/* under construction !*/
#endif // 0
#if defined(__HW_PFC_SUPPORT__)
print_bootup_trace_enter(SST_INIT_DRV2_PFC);
DclPFC_Initialize();
print_bootup_trace_exit(SST_INIT_DRV2_PFC);
#endif //#if defined(__HW_PFC_SUPPORT__)
#ifdef DRV_HIF_SUPPORT
hif_init();
#endif
#ifdef DRV_SPI_SUPPORT
spi_init();
#endif
#if defined(TOUCH_PANEL_SUPPORT)
DclSTS_Initialize();//always call --- remove the init function from touch_panel_main()
#endif
#if defined(MOTION_SENSOR_SUPPORT)
print_bootup_trace_enter(SST_INIT_DRV2_MSENS);
motion_sensor_init();
print_bootup_trace_exit(SST_INIT_DRV2_MSENS);
#endif
brt_drv_init();
}
