void DIALOG_DXF_IMPORT::getPcbImportOffsets()
{
m_PcbImportOffsetX = DoubleValueFromString( UNSCALED_UNITS, m_DxfPcbXCoord->GetValue() );
m_PcbImportOffsetY = DoubleValueFromString( UNSCALED_UNITS, m_DxfPcbYCoord->GetValue() );
if( m_PcbImportUnits ) // Units are inches
{
m_PcbImportOffsetX *= 25.4;
m_PcbImportOffsetY *= 25.4;
}
return;
}
void DIALOG_CREATE_ARRAY::calculateCircularArrayProperties()
{
wxPoint centre;
centre.x = DoubleValueFromString( g_UserUnit, m_entryCentreX->GetValue() );
centre.y = DoubleValueFromString( g_UserUnit, m_entryCentreY->GetValue() );
// Find the radius, etc of the circle
centre -= m_originalItemPosition;
const double radius = VECTOR2I(centre.x, centre.y).EuclideanNorm();
m_labelCircRadiusValue->SetLabelText( StringFromValue( g_UserUnit, int(radius), true ) );
}
void PANEL_PREV_3D::onMouseWheelOffset( wxMouseEvent& event )
{
wxTextCtrl* textCtrl = (wxTextCtrl*) event.GetEventObject();
double step = OFFSET_INCREMENT_MM;
if( event.ShiftDown( ) )
step = OFFSET_INCREMENT_MM_FINE;
if( m_userUnits == INCHES )
{
step = OFFSET_INCREMENT_MIL/1000.0;
if( event.ShiftDown( ) )
step = OFFSET_INCREMENT_MIL_FINE/1000.0;
}
if( event.GetWheelRotation() >= 0 )
step = -step;
double curr_value = DoubleValueFromString( m_userUnits, textCtrl->GetValue() ) / IU_PER_MM;
curr_value += step;
curr_value = std::max( -MAX_OFFSET, curr_value );
curr_value = std::min( curr_value, MAX_OFFSET );
textCtrl->SetValue( formatOffsetValue( curr_value ) );
}
bool DIALOG_SET_GRID::getGridOrigin( wxPoint& aGridOrigin )
{
double tmp;
tmp = DoubleValueFromString( g_UserUnit, m_GridOriginXCtrl->GetValue() );
// Some error checking here is a good thing.
if( tmp < -MAX_GRID_OFFSET || tmp > MAX_GRID_OFFSET )
return false;
aGridOrigin.x = KiROUND( tmp );
tmp = DoubleValueFromString( g_UserUnit, m_GridOriginYCtrl->GetValue() );
if( tmp < -MAX_GRID_OFFSET || tmp > MAX_GRID_OFFSET )
return false;
aGridOrigin.y = KiROUND( tmp );
return true;
}
/**
* @brief rotationFromString
* Ensure -MAX_ROTATION <= rotation <= MAX_ROTATION
* aRotation will be normalized between -MAX_ROTATION and MAX_ROTATION
*/
static double rotationFromString( const wxString& aValue )
{
double rotation = DoubleValueFromString( DEGREES, aValue ) / 10.0;
if( rotation > MAX_ROTATION )
{
int n = rotation / MAX_ROTATION;
rotation -= MAX_ROTATION * n;
}
else if( rotation < -MAX_ROTATION )
{
int n = -rotation / MAX_ROTATION;
rotation += MAX_ROTATION * n;
}
return rotation;
}
void PANEL_PREV_3D::doIncrementRotation( wxSpinEvent& aEvent, double aSign )
{
wxSpinButton* spinCtrl = (wxSpinButton*) aEvent.GetEventObject();
wxTextCtrl* textCtrl = xrot;
if( spinCtrl == m_spinYrot )
textCtrl = yrot;
else if( spinCtrl == m_spinZrot )
textCtrl = zrot;
double curr_value = DoubleValueFromString( DEGREES, textCtrl->GetValue() ) / 10.0;
curr_value += ( ROTATION_INCREMENT * aSign );
curr_value = std::max( -MAX_ROTATION, curr_value );
curr_value = std::min( curr_value, MAX_ROTATION );
textCtrl->SetValue( formatRotationValue( curr_value ) );
}
void DIALOG_MOVE_EXACT::OnOkClick( wxCommandEvent& event )
{
m_rotation = DoubleValueFromString( DEGREES, m_rotEntry->GetValue() );
// for the output, we only deliver a Cartesian vector
bool ok = GetTranslationInIU( m_translation, m_polarCoords->IsChecked() );
if ( ok )
{
// save the settings
m_options.polarCoords = m_polarCoords->GetValue();
m_xEntry->GetValue().ToDouble( &m_options.entry1 );
m_yEntry->GetValue().ToDouble( &m_options.entry2 );
m_rotEntry->GetValue().ToDouble( &m_options.entryRotation );
EndModal( wxID_OK);
}
}
void PANEL_PREV_3D::doIncrementScale( wxSpinEvent& event, double aSign )
{
wxSpinButton* spinCtrl = (wxSpinButton*) event.GetEventObject();
wxTextCtrl * textCtrl = xscale;
if( spinCtrl == m_spinYscale )
textCtrl = yscale;
else if( spinCtrl == m_spinZscale )
textCtrl = zscale;
double curr_value = DoubleValueFromString( UNSCALED_UNITS, textCtrl->GetValue() );
curr_value += ( SCALE_INCREMENT * aSign );
curr_value = std::max( 1/MAX_SCALE, curr_value );
curr_value = std::min( curr_value, MAX_SCALE );
textCtrl->SetValue( formatScaleValue( curr_value ) );
}
void PANEL_PREV_3D::onMouseWheelScale( wxMouseEvent& event )
{
wxTextCtrl* textCtrl = (wxTextCtrl*) event.GetEventObject();
double step = SCALE_INCREMENT;
if( event.ShiftDown( ) )
step = SCALE_INCREMENT_FINE;
if( event.GetWheelRotation() >= 0 )
step = -step;
double curr_value = DoubleValueFromString( UNSCALED_UNITS, textCtrl->GetValue() );
curr_value += step;
curr_value = std::max( 1/MAX_SCALE, curr_value );
curr_value = std::min( curr_value, MAX_SCALE );
textCtrl->SetValue( formatScaleValue( curr_value ) );
}
void PANEL_PREV_3D::onMouseWheelRot( wxMouseEvent& event )
{
wxTextCtrl* textCtrl = (wxTextCtrl*) event.GetEventObject();
double step = ROTATION_INCREMENT_WHEEL;
if( event.ShiftDown( ) )
step = ROTATION_INCREMENT_WHEEL_FINE;
if( event.GetWheelRotation() >= 0 )
step = -step;
double curr_value = DoubleValueFromString( DEGREES, textCtrl->GetValue() ) / 10.0;
curr_value += step;
curr_value = std::max( -MAX_ROTATION, curr_value );
curr_value = std::min( curr_value, MAX_ROTATION );
textCtrl->SetValue( formatRotationValue( curr_value ) );
}
bool DIALOG_MOVE_EXACT::GetTranslationInIU ( wxPoint& val, bool polar )
{
if( polar )
{
const int r = ValueFromTextCtrl( *m_xEntry );
const double q = DoubleValueFromString( DEGREES, m_yEntry->GetValue() );
val.x = r * cos( DEG2RAD( q / 10.0 ) );
val.y = r * sin( DEG2RAD( q / 10.0 ) );
}
else
{
// direct read
val.x = ValueFromTextCtrl( *m_xEntry );
val.y = ValueFromTextCtrl( *m_yEntry );
}
// no validation to do here, but in future, you could return false here
return true;
}
double DIALOG_DXF_IMPORT::getPCBdefaultLineWidthMM()
{
double value = DoubleValueFromString( UNSCALED_UNITS, m_textCtrlLineWidth->GetValue() );
switch( m_PCBLineWidthUnits )
{
default:
case 0: // display units = mm
break;
case 1: // display units = mil
value *= 25.4 / 1000;
break;
case 2: // display units = inch
value *= 25.4;
break;
}
return value; // value is in mm
}
void PANEL_PREV_3D::doIncrementOffset( wxSpinEvent& event, double aSign )
{
wxSpinButton* spinCtrl = (wxSpinButton*) event.GetEventObject();
wxTextCtrl * textCtrl = xoff;
if( spinCtrl == m_spinYoffset )
textCtrl = yoff;
else if( spinCtrl == m_spinZoffset )
textCtrl = zoff;
double step = OFFSET_INCREMENT_MM;
if( m_userUnits == INCHES )
step = OFFSET_INCREMENT_MIL/1000.0;
double curr_value = DoubleValueFromString( m_userUnits, textCtrl->GetValue() ) / IU_PER_MM;
curr_value += ( step * aSign );
curr_value = std::max( -MAX_OFFSET, curr_value );
curr_value = std::min( curr_value, MAX_OFFSET );
textCtrl->SetValue( formatOffsetValue( curr_value ) );
}
void PANEL_PREV_3D::updateOrientation( wxCommandEvent &event )
{
if( m_parentModelList && m_selected >= 0 && m_selected < (int) m_parentModelList->size() )
{
// Write settings back to the parent
MODULE_3D_SETTINGS* modelInfo = &m_parentModelList->at( (unsigned) m_selected );
modelInfo->m_Scale.x = DoubleValueFromString( UNSCALED_UNITS, xscale->GetValue() );
modelInfo->m_Scale.y = DoubleValueFromString( UNSCALED_UNITS, yscale->GetValue() );
modelInfo->m_Scale.z = DoubleValueFromString( UNSCALED_UNITS, zscale->GetValue() );
modelInfo->m_Rotation.x = rotationFromString( xrot->GetValue() );
modelInfo->m_Rotation.y = rotationFromString( yrot->GetValue() );
modelInfo->m_Rotation.z = rotationFromString( zrot->GetValue() );
modelInfo->m_Offset.x = DoubleValueFromString( m_userUnits, xoff->GetValue() ) / IU_PER_MM;
modelInfo->m_Offset.y = DoubleValueFromString( m_userUnits, yoff->GetValue() ) / IU_PER_MM;
modelInfo->m_Offset.z = DoubleValueFromString( m_userUnits, zoff->GetValue() ) / IU_PER_MM;
// Update the dummy module for the preview
UpdateDummyModule( false );
}
}
bool DIALOG_CREATE_ARRAY::TransferDataFromWindow()
{
ARRAY_OPTIONS* newSettings = NULL;
wxArrayString errors;
const wxWindow* page = m_gridTypeNotebook->GetCurrentPage();
if( page == m_gridPanel )
{
ARRAY_GRID_OPTIONS* newGrid = new ARRAY_GRID_OPTIONS();
bool ok = true;
// ints
ok = ok && validateLongEntry(*m_entryNx, newGrid->m_nx, _("horizontal count"), errors);
ok = ok && validateLongEntry(*m_entryNy, newGrid->m_ny, _("vertical count"), errors);
newGrid->m_delta.x = m_hSpacing.GetValue();
newGrid->m_delta.y = m_vSpacing.GetValue();
newGrid->m_offset.x = m_hOffset.GetValue();
newGrid->m_offset.y = m_vOffset.GetValue();
ok = ok && validateLongEntry(*m_entryStagger, newGrid->m_stagger, _("stagger"), errors);
newGrid->m_stagger_rows = m_radioBoxGridStaggerType->GetSelection() == 0;
newGrid->m_horizontalThenVertical = m_radioBoxGridNumberingAxis->GetSelection() == 0;
newGrid->m_reverseNumberingAlternate = m_checkBoxGridReverseNumbering->GetValue();
newGrid->SetShouldNumber( m_numberingEnabled );
if ( m_numberingEnabled )
{
newGrid->SetNumberingStartIsSpecified( m_rbGridStartNumberingOpt->GetSelection() == 1 );
if( newGrid->GetNumberingStartIsSpecified() )
{
newGrid->m_2dArrayNumbering = m_radioBoxGridNumberingScheme->GetSelection() != 0;
// validate from the input fields
bool numOk = validateNumberingTypeAndOffset( *m_entryGridPriNumberingOffset,
*m_choicePriAxisNumbering, newGrid->m_priAxisNumType,
newGrid->m_numberingOffsetX, errors );
if( newGrid->m_2dArrayNumbering )
{
numOk = validateNumberingTypeAndOffset( *m_entryGridSecNumberingOffset,
*m_choiceSecAxisNumbering, newGrid->m_secAxisNumType,
newGrid->m_numberingOffsetY, errors )
&& numOk;
}
ok = ok && numOk;
}
else
{
// artificial linear numeric scheme from 1
newGrid->m_2dArrayNumbering = false;
newGrid->m_priAxisNumType = ARRAY_OPTIONS::NUMBERING_TYPE_T::NUMBERING_NUMERIC;
newGrid->m_numberingOffsetX = 1; // Start at "1"
}
}
// Only use settings if all values are good
if( ok )
newSettings = newGrid;
else
delete newGrid;
}
else if( page == m_circularPanel )
{
ARRAY_CIRCULAR_OPTIONS* newCirc = new ARRAY_CIRCULAR_OPTIONS();
bool ok = true;
newCirc->m_centre.x = m_hCentre.GetValue();
newCirc->m_centre.y = m_vCentre.GetValue();
newCirc->m_angle = DoubleValueFromString( DEGREES, m_entryCircAngle->GetValue() );
ok = ok && validateLongEntry(*m_entryCircCount, newCirc->m_nPts, _("point count"), errors);
newCirc->m_rotateItems = m_entryRotateItemsCb->GetValue();
newCirc->SetShouldNumber( m_numberingEnabled );
if ( m_numberingEnabled )
{
newCirc->SetNumberingStartIsSpecified( m_rbCircStartNumberingOpt->GetSelection() == 1 );
if( newCirc->GetNumberingStartIsSpecified() )
{
newCirc->m_numberingType = ARRAY_OPTIONS::NUMBERING_NUMERIC;
ok = ok
&& validateLongEntry( *m_entryCircNumberingStart, newCirc->m_numberingOffset,
_( "numbering start" ), errors );
}
else
{
// artificial linear numeric scheme from 1
newCirc->m_numberingOffset = 1; // Start at "1"
}
}
// Only use settings if all values are good
if( ok )
newSettings = newCirc;
else
delete newCirc;
}
// If we got good settings, send them out and finish
if( newSettings )
{
delete m_settings;
// assign pointer and ownership here
m_settings = newSettings;
m_cfg_persister.ReadConfigFromControls();
return true;
}
else
{
wxString errorStr;
if( errors.IsEmpty() )
errorStr = _("Bad parameters");
else
errorStr = boost::algorithm::join( errors, "\n" );
wxMessageBox( errorStr );
return false;
}
}
void DIALOG_CREATE_ARRAY::OnOkClick( wxCommandEvent& event )
{
ARRAY_OPTIONS* newSettings = NULL;
const wxWindow* page = m_gridTypeNotebook->GetCurrentPage();
if( page == m_gridPanel )
{
ARRAY_GRID_OPTIONS* newGrid = new ARRAY_GRID_OPTIONS();
bool ok = true;
// ints
ok = ok && m_entryNx->GetValue().ToLong( &newGrid->m_nx );
ok = ok && m_entryNy->GetValue().ToLong( &newGrid->m_ny );
newGrid->m_delta.x = DoubleValueFromString( g_UserUnit, m_entryDx->GetValue() );
newGrid->m_delta.y = DoubleValueFromString( g_UserUnit, m_entryDy->GetValue() );
newGrid->m_offset.x = DoubleValueFromString( g_UserUnit, m_entryOffsetX->GetValue() );
newGrid->m_offset.y = DoubleValueFromString( g_UserUnit, m_entryOffsetY->GetValue() );
ok = ok && m_entryStagger->GetValue().ToLong( &newGrid->m_stagger );
newGrid->m_stagger_rows = m_radioBoxGridStaggerType->GetSelection() == 0;
newGrid->m_horizontalThenVertical = m_radioBoxGridNumberingAxis->GetSelection() == 0;
newGrid->m_reverseNumberingAlternate = m_checkBoxGridReverseNumbering->GetValue();
newGrid->m_2dArrayNumbering = m_radioBoxGridNumberingScheme->GetSelection() != 0;
// this is only correct if you set the choice up according to the enum size and order
ok = ok && m_choicePriAxisNumbering->GetSelection() < NUMBERING_TYPE_Max
&& m_choiceSecAxisNumbering->GetSelection() < NUMBERING_TYPE_Max;
// mind undefined casts to enums (should not be able to happen)
if( ok )
{
newGrid->m_priAxisNumType =
(ARRAY_NUMBERING_TYPE_T) m_choicePriAxisNumbering->GetSelection();
newGrid->m_secAxisNumType =
(ARRAY_NUMBERING_TYPE_T) m_choiceSecAxisNumbering->GetSelection();
}
// Work out the offsets for the numbering
ok = ok && getNumberingOffset(
m_entryGridPriNumberingOffset->GetValue().ToStdString(),
newGrid->m_priAxisNumType, newGrid->m_numberingOffsetX );
if( newGrid->m_2dArrayNumbering )
ok = ok && getNumberingOffset(
m_entryGridSecNumberingOffset->GetValue().ToStdString(),
newGrid->m_secAxisNumType, newGrid->m_numberingOffsetY );
newGrid->m_shouldRenumber = m_checkBoxGridRestartNumbering->GetValue();
// Only use settings if all values are good
if( ok )
newSettings = newGrid;
else
delete newGrid;
}
else if( page == m_circularPanel )
{
ARRAY_CIRCULAR_OPTIONS* newCirc = new ARRAY_CIRCULAR_OPTIONS();
bool ok = true;
newCirc->m_centre.x = DoubleValueFromString( g_UserUnit, m_entryCentreX->GetValue() );
newCirc->m_centre.y = DoubleValueFromString( g_UserUnit, m_entryCentreY->GetValue() );
newCirc->m_angle = DoubleValueFromString( DEGREES, m_entryCircAngle->GetValue() );
ok = ok && m_entryCircCount->GetValue().ToLong( &newCirc->m_nPts );
newCirc->m_rotateItems = m_entryRotateItemsCb->GetValue();
newCirc->m_shouldRenumber = m_checkBoxCircRestartNumbering->GetValue();
// This is only correct if you set the choice up according to the enum size and order
ok = ok && m_choiceCircNumberingType->GetSelection() < NUMBERING_TYPE_Max;
// Mind undefined casts to enums (should not be able to happen)
if( ok )
newCirc->m_numberingType =
(ARRAY_NUMBERING_TYPE_T) m_choiceCircNumberingType->GetSelection();
ok = ok && m_entryCircNumberingStart->GetValue().ToLong( &newCirc->m_numberingOffset );
// Only use settings if all values are good
if( ok )
newSettings = newCirc;
else
delete newCirc;
}
// If we got good settings, send them out and finish
if( newSettings )
{
delete *m_settings;
// assign pointer and ownership here
*m_settings = newSettings;
ReadConfigFromControls();
EndModal( wxID_OK );
}
}
double GetYOrg()
{
return DoubleValueFromString( UNSCALED_UNITS, m_STEP_Yorg->GetValue() );
}
double GetYRef()
{
return DoubleValueFromString( UNSCALED_UNITS, m_VRML_Yref->GetValue() );
}
void DIALOG_DXF_IMPORT::GetPCBGridOffsets( double &aXOffset, double &aYOffset )
{
aXOffset = DoubleValueFromString( UNSCALED_UNITS, m_DXFPCBXCoord->GetValue() );
aYOffset = DoubleValueFromString( UNSCALED_UNITS, m_DXFPCBYCoord->GetValue() );
return;
}
void DIALOG_CREATE_ARRAY::OnOkClick( wxCommandEvent& event )
{
ARRAY_OPTIONS* newSettings = NULL;
wxArrayString errorStrs;
const wxWindow* page = m_gridTypeNotebook->GetCurrentPage();
if( page == m_gridPanel )
{
ARRAY_GRID_OPTIONS* newGrid = new ARRAY_GRID_OPTIONS();
bool ok = true;
// ints
ok = ok && validateLongEntry(*m_entryNx, newGrid->m_nx, _("horizontal count"),
errorStrs);
ok = ok && validateLongEntry(*m_entryNy, newGrid->m_ny, _("vertical count"),
errorStrs);
newGrid->m_delta.x = DoubleValueFromString( g_UserUnit, m_entryDx->GetValue() );
newGrid->m_delta.y = DoubleValueFromString( g_UserUnit, m_entryDy->GetValue() );
newGrid->m_offset.x = DoubleValueFromString( g_UserUnit, m_entryOffsetX->GetValue() );
newGrid->m_offset.y = DoubleValueFromString( g_UserUnit, m_entryOffsetY->GetValue() );
ok = ok && validateLongEntry(*m_entryStagger, newGrid->m_stagger, _("stagger"),
errorStrs);
newGrid->m_stagger_rows = m_radioBoxGridStaggerType->GetSelection() == 0;
newGrid->m_horizontalThenVertical = m_radioBoxGridNumberingAxis->GetSelection() == 0;
newGrid->m_reverseNumberingAlternate = m_checkBoxGridReverseNumbering->GetValue();
newGrid->m_shouldNumber = m_numberingEnabled;
if ( m_numberingEnabled )
{
newGrid->m_2dArrayNumbering = m_radioBoxGridNumberingScheme->GetSelection() != 0;
bool numOk = validateNumberingTypeAndOffset(
*m_entryGridPriNumberingOffset, *m_choicePriAxisNumbering,
newGrid->m_priAxisNumType, newGrid->m_numberingOffsetX,
errorStrs );
if( newGrid->m_2dArrayNumbering )
{
numOk = validateNumberingTypeAndOffset(
*m_entryGridSecNumberingOffset, *m_choiceSecAxisNumbering,
newGrid->m_secAxisNumType, newGrid->m_numberingOffsetY,
errorStrs ) && numOk;
}
ok = ok && numOk;
newGrid->m_numberingStartIsSpecified = m_rbGridStartNumberingOpt->GetSelection() == 1;
}
// Only use settings if all values are good
if( ok )
newSettings = newGrid;
else
delete newGrid;
}
else if( page == m_circularPanel )
{
ARRAY_CIRCULAR_OPTIONS* newCirc = new ARRAY_CIRCULAR_OPTIONS();
bool ok = true;
newCirc->m_centre.x = DoubleValueFromString( g_UserUnit, m_entryCentreX->GetValue() );
newCirc->m_centre.y = DoubleValueFromString( g_UserUnit, m_entryCentreY->GetValue() );
newCirc->m_angle = DoubleValueFromString( DEGREES, m_entryCircAngle->GetValue() );
ok = ok && validateLongEntry(*m_entryCircCount, newCirc->m_nPts,
_("point count"), errorStrs);
newCirc->m_rotateItems = m_entryRotateItemsCb->GetValue();
newCirc->m_shouldNumber = m_numberingEnabled;
if ( m_numberingEnabled )
{
newCirc->m_numberingStartIsSpecified = m_rbCircStartNumberingOpt->GetSelection() == 1;
newCirc->m_numberingType = NUMBERING_NUMERIC;
ok = ok && validateLongEntry(*m_entryCircNumberingStart,
newCirc->m_numberingOffset,
_("numbering start"), errorStrs);
}
// Only use settings if all values are good
if( ok )
newSettings = newCirc;
else
delete newCirc;
}
// If we got good settings, send them out and finish
if( newSettings )
{
delete m_settings;
// assign pointer and ownership here
m_settings = newSettings;
ReadConfigFromControls();
EndModal( wxID_OK );
}
else
{
wxString errorStr;
if( errorStrs.IsEmpty() )
errorStr = _("Bad parameters");
else
errorStr = boost::algorithm::join( errorStrs, "\n" );
wxMessageBox( errorStr );
}
}
