Exemplo n.º 1
0
/**
  Convert the IFR data into the network configuration data and set the IP
  configure parameters for the NIC.

  @param[in, out]  Ip4ConfigInstance The IP4Config instance.

  @retval EFI_SUCCESS            The configure parameter for this NIC was
                                 set successfully.
  @retval EFI_ALREADY_STARTED    There is a pending auto configuration.
  @retval EFI_NOT_FOUND          No auto configure parameter is found.

**/
EFI_STATUS
Ip4ConfigConvertIfrNvDataToDeviceConfigData (
  IN OUT IP4_CONFIG_INSTANCE       *Ip4ConfigInstance
  )
{
  EFI_STATUS                Status;
  EFI_IP_ADDRESS            HostIp;
  EFI_IP_ADDRESS            SubnetMask;
  EFI_IP_ADDRESS            Gateway;
  EFI_INPUT_KEY             Key;
  NIC_IP4_CONFIG_INFO       *NicInfo;
  EFI_IP_ADDRESS            Ip;

  if (!Ip4ConfigInstance->Ip4ConfigCallbackInfo.Configured) {
    //
    // Clear the variable
    //
    ZeroMem (&Ip4ConfigInstance->Ip4ConfigCallbackInfo, sizeof (IP4_SETTING_INFO));

    Status = EfiNicIp4ConfigSetInfo (Ip4ConfigInstance, NULL, TRUE);
    if (Status == EFI_NOT_FOUND) {
      return EFI_SUCCESS;
    }

    return Status;
  }

  NicInfo = AllocateZeroPool (sizeof (NIC_IP4_CONFIG_INFO) + 2 * sizeof (EFI_IP4_ROUTE_TABLE));
  ASSERT (NicInfo != NULL);

  NicInfo->Ip4Info.RouteTable = (EFI_IP4_ROUTE_TABLE *) (NicInfo + 1);

  if (!Ip4ConfigInstance->Ip4ConfigCallbackInfo.DhcpEnabled) {
    CopyMem (&HostIp.v4, &Ip4ConfigInstance->Ip4ConfigCallbackInfo.LocalIp, sizeof (HostIp.v4));
    CopyMem (&SubnetMask.v4, &Ip4ConfigInstance->Ip4ConfigCallbackInfo.SubnetMask, sizeof (SubnetMask.v4));
    CopyMem (&Gateway.v4, &Ip4ConfigInstance->Ip4ConfigCallbackInfo.Gateway, sizeof (Gateway.v4));

    if (!NetIp4IsUnicast (NTOHL (HostIp.Addr[0]), 0)) {
      CreatePopUp (EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE, &Key, L"Invalid IP address!", NULL);
      return EFI_INVALID_PARAMETER;
    }
    if (EFI_IP4_EQUAL (&SubnetMask, &mZeroIp4Addr)) {
      CreatePopUp (EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE, &Key, L"Invalid Subnet Mask!", NULL);
      return EFI_INVALID_PARAMETER;
    }

    if ((Gateway.Addr[0] != 0)) {
      if (SubnetMask.Addr[0] == 0) {
        CreatePopUp (EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE, &Key, L"Gateway address is set but subnet mask is zero.", NULL);
        return EFI_INVALID_PARAMETER;

      } else if (!IP4_NET_EQUAL (HostIp.Addr[0], Gateway.Addr[0], SubnetMask.Addr[0])) {
        CreatePopUp (EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE, &Key, L"Local IP and Gateway are not in the same subnet.", NULL);
        return EFI_INVALID_PARAMETER;      }
    }

    NicInfo->Source = IP4_CONFIG_SOURCE_STATIC;
    NicInfo->Ip4Info.RouteTableSize = 2;

    CopyMem (&NicInfo->Ip4Info.StationAddress, &HostIp.v4, sizeof (EFI_IPv4_ADDRESS));
    CopyMem (&NicInfo->Ip4Info.SubnetMask, &SubnetMask.v4, sizeof (EFI_IPv4_ADDRESS));

    Ip.Addr[0] = HostIp.Addr[0] & SubnetMask.Addr[0];

    CopyMem (&NicInfo->Ip4Info.RouteTable[0].SubnetAddress, &Ip.v4, sizeof (EFI_IPv4_ADDRESS));
    CopyMem (&NicInfo->Ip4Info.RouteTable[0].SubnetMask, &SubnetMask.v4, sizeof (EFI_IPv4_ADDRESS));
    CopyMem (&NicInfo->Ip4Info.RouteTable[1].GatewayAddress, &Gateway.v4, sizeof (EFI_IPv4_ADDRESS));

  } else {
    NicInfo->Source = IP4_CONFIG_SOURCE_DHCP;
    ZeroMem (&Ip4ConfigInstance->Ip4ConfigCallbackInfo.LocalIp, sizeof (EFI_IPv4_ADDRESS));
    ZeroMem (&Ip4ConfigInstance->Ip4ConfigCallbackInfo.SubnetMask, sizeof (EFI_IPv4_ADDRESS));
    ZeroMem (&Ip4ConfigInstance->Ip4ConfigCallbackInfo.Gateway, sizeof (EFI_IPv4_ADDRESS));
  }

  NicInfo->Perment = TRUE;
  CopyMem (&NicInfo->NicAddr, &Ip4ConfigInstance->NicAddr, sizeof (NIC_ADDR));

  return EfiNicIp4ConfigSetInfo (Ip4ConfigInstance, NicInfo, TRUE);
}
Exemplo n.º 2
0
/**
  Create a TCP socket with the specified configuration data. 

  @param[in]  Image      The handle of the driver image.
  @param[in]  Controller The handle of the controller.
  @param[in]  TcpVersion The version of Tcp, TCP_VERSION_4 or TCP_VERSION_6.
  @param[in]  ConfigData The Tcp configuration data.
  @param[out] TcpIo      The TcpIo.
  
  @retval EFI_SUCCESS            The TCP socket is created and configured.
  @retval EFI_INVALID_PARAMETER  One or more parameters are invalid.
  @retval EFI_UNSUPPORTED        One or more of the control options are not
                                 supported in the implementation.
  @retval EFI_OUT_OF_RESOURCES   Failed to allocate memory.
  @retval Others                 Failed to create the TCP socket or configure it.

**/
EFI_STATUS
EFIAPI
TcpIoCreateSocket (
  IN EFI_HANDLE             Image,
  IN EFI_HANDLE             Controller,
  IN UINT8                  TcpVersion,
  IN TCP_IO_CONFIG_DATA     *ConfigData,
  OUT TCP_IO                *TcpIo
  )
{
  EFI_STATUS                Status;
  EFI_EVENT                 Event;
  EFI_GUID                  *ServiceBindingGuid;
  EFI_GUID                  *ProtocolGuid;
  VOID                      **Interface;
  EFI_TCP4_OPTION           ControlOption;
  EFI_TCP4_CONFIG_DATA      Tcp4ConfigData;
  EFI_TCP4_ACCESS_POINT     *AccessPoint4;
  EFI_TCP4_PROTOCOL         *Tcp4;
  EFI_TCP6_CONFIG_DATA      Tcp6ConfigData;
  EFI_TCP6_ACCESS_POINT     *AccessPoint6;
  EFI_TCP6_PROTOCOL         *Tcp6;
  EFI_TCP4_RECEIVE_DATA     *RxData;

  if ((Image == NULL) || (Controller == NULL) || (ConfigData == NULL) || (TcpIo == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  Tcp4 = NULL;
  Tcp6 = NULL;

  ZeroMem (TcpIo, sizeof (TCP_IO));

  if (TcpVersion == TCP_VERSION_4) {
    ServiceBindingGuid = &gEfiTcp4ServiceBindingProtocolGuid;
    ProtocolGuid       = &gEfiTcp4ProtocolGuid;
    Interface          = (VOID **) (&TcpIo->Tcp.Tcp4);
  } else if (TcpVersion == TCP_VERSION_6) {
    ServiceBindingGuid = &gEfiTcp6ServiceBindingProtocolGuid;
    ProtocolGuid       = &gEfiTcp6ProtocolGuid;
    Interface          = (VOID **) (&TcpIo->Tcp.Tcp6);
  } else {
    return EFI_UNSUPPORTED;
  }

  TcpIo->TcpVersion = TcpVersion;

  //
  // Create the TCP child instance and get the TCP protocol.
  //  
  Status = NetLibCreateServiceChild (
             Controller,
             Image,
             ServiceBindingGuid,
             &TcpIo->Handle
             );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = gBS->OpenProtocol (
                  TcpIo->Handle,
                  ProtocolGuid,
                  Interface,
                  Image,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status) || (*Interface == NULL)) {
    goto ON_ERROR;
  }

  if (TcpVersion == TCP_VERSION_4) {
    Tcp4             = TcpIo->Tcp.Tcp4;
  } else {
    Tcp6             = TcpIo->Tcp.Tcp6;
  }

  TcpIo->Image       = Image;
  TcpIo->Controller  = Controller;

  //
  // Set the configuration parameters.
  //
  ControlOption.ReceiveBufferSize       = 0x200000;
  ControlOption.SendBufferSize          = 0x200000;
  ControlOption.MaxSynBackLog           = 0;
  ControlOption.ConnectionTimeout       = 0;
  ControlOption.DataRetries             = 6;
  ControlOption.FinTimeout              = 0;
  ControlOption.TimeWaitTimeout         = 0;
  ControlOption.KeepAliveProbes         = 4;
  ControlOption.KeepAliveTime           = 0;
  ControlOption.KeepAliveInterval       = 0;
  ControlOption.EnableNagle             = FALSE;
  ControlOption.EnableTimeStamp         = FALSE;
  ControlOption.EnableWindowScaling     = TRUE;
  ControlOption.EnableSelectiveAck      = FALSE;
  ControlOption.EnablePathMtuDiscovery  = FALSE;

  if (TcpVersion == TCP_VERSION_4) {
    Tcp4ConfigData.TypeOfService        = 8;
    Tcp4ConfigData.TimeToLive           = 255;
    Tcp4ConfigData.ControlOption        = &ControlOption;

    AccessPoint4                        = &Tcp4ConfigData.AccessPoint;

    ZeroMem (AccessPoint4, sizeof (EFI_TCP4_ACCESS_POINT));
    AccessPoint4->StationPort           = ConfigData->Tcp4IoConfigData.StationPort;
    AccessPoint4->RemotePort            = ConfigData->Tcp4IoConfigData.RemotePort;
    AccessPoint4->ActiveFlag            = ConfigData->Tcp4IoConfigData.ActiveFlag;

    CopyMem (
      &AccessPoint4->StationAddress,
      &ConfigData->Tcp4IoConfigData.LocalIp,
      sizeof (EFI_IPv4_ADDRESS)
      );
    CopyMem (
      &AccessPoint4->SubnetMask,
      &ConfigData->Tcp4IoConfigData.SubnetMask,
      sizeof (EFI_IPv4_ADDRESS)
      );
    CopyMem (
      &AccessPoint4->RemoteAddress,
      &ConfigData->Tcp4IoConfigData.RemoteIp,
      sizeof (EFI_IPv4_ADDRESS)
      );

    ASSERT (Tcp4 != NULL);

    //
    // Configure the TCP4 protocol.
    //
    Status = Tcp4->Configure (Tcp4, &Tcp4ConfigData);
    if (EFI_ERROR (Status)) {
      goto ON_ERROR;
    }

    if (!EFI_IP4_EQUAL (&ConfigData->Tcp4IoConfigData.Gateway, &mZeroIp4Addr)) {
      //
      // The gateway is not zero. Add the default route manually.
      //
      Status = Tcp4->Routes (
                       Tcp4,
                       FALSE,
                       &mZeroIp4Addr,
                       &mZeroIp4Addr,
                       &ConfigData->Tcp4IoConfigData.Gateway
                       );
      if (EFI_ERROR (Status)) {
        goto ON_ERROR;
      }
    }
  } else {
    Tcp6ConfigData.TrafficClass         = 0;
    Tcp6ConfigData.HopLimit             = 255;
    Tcp6ConfigData.ControlOption        = (EFI_TCP6_OPTION *) &ControlOption;

    AccessPoint6                        = &Tcp6ConfigData.AccessPoint;

    ZeroMem (AccessPoint6, sizeof (EFI_TCP6_ACCESS_POINT));
    AccessPoint6->StationPort           = ConfigData->Tcp6IoConfigData.StationPort;
    AccessPoint6->RemotePort            = ConfigData->Tcp6IoConfigData.RemotePort;
    AccessPoint6->ActiveFlag            = ConfigData->Tcp6IoConfigData.ActiveFlag;

    IP6_COPY_ADDRESS (&AccessPoint6->RemoteAddress, &ConfigData->Tcp6IoConfigData.RemoteIp);


    ASSERT (Tcp6 != NULL);
    //
    // Configure the TCP6 protocol.
    //
    Status = Tcp6->Configure (Tcp6, &Tcp6ConfigData);
    if (Status == EFI_NO_MAPPING) {
      Status = TcpIoGetMapping (Tcp6, &Tcp6ConfigData);
    }

    if (EFI_ERROR (Status)) {
      goto ON_ERROR;
    }
  }

  //
  // Create events for variuos asynchronous operations.
  //
  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  TcpIoCommonNotify,
                  &TcpIo->IsConnDone,
                  &Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  TcpIo->ConnToken.Tcp4Token.CompletionToken.Event = Event;

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  TcpIoCommonNotify,
                  &TcpIo->IsListenDone,
                  &Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  TcpIo->ListenToken.Tcp4Token.CompletionToken.Event = Event;

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  TcpIoCommonNotify,
                  &TcpIo->IsTxDone,
                  &Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  TcpIo->TxToken.Tcp4Token.CompletionToken.Event = Event;


  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  TcpIoCommonNotify,
                  &TcpIo->IsRxDone,
                  &Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  TcpIo->RxToken.Tcp4Token.CompletionToken.Event = Event;

  RxData = (EFI_TCP4_RECEIVE_DATA *) AllocateZeroPool (sizeof (EFI_TCP4_RECEIVE_DATA));
  if (RxData == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto ON_ERROR;
  }

  TcpIo->RxToken.Tcp4Token.Packet.RxData = RxData;

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  TcpIoCommonNotify,
                  &TcpIo->IsCloseDone,
                  &Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  TcpIo->CloseToken.Tcp4Token.CompletionToken.Event = Event;


  return EFI_SUCCESS;

ON_ERROR:

  TcpIoDestroySocket (TcpIo);

  return Status;
}
Exemplo n.º 3
0
/**
  Configure a UDP IO port to receive the multicast.

  @param  McastIo               The UDP IO to configure
  @param  Context               The opaque parameter to the function which is the
                                MTFTP session.

  @retval EFI_SUCCESS           The UDP child is successfully configured.
  @retval Others                Failed to configure the UDP child.

**/
EFI_STATUS
EFIAPI
Mtftp4RrqConfigMcastPort (
  IN UDP_IO                 *McastIo,
  IN VOID                   *Context
  )
{
  MTFTP4_PROTOCOL           *Instance;
  EFI_MTFTP4_CONFIG_DATA    *Config;
  EFI_UDP4_CONFIG_DATA      UdpConfig;
  EFI_IPv4_ADDRESS          Group;
  EFI_STATUS                Status;
  IP4_ADDR                  Ip;

  Instance                     = (MTFTP4_PROTOCOL *) Context;
  Config                       = &Instance->Config;

  UdpConfig.AcceptBroadcast    = FALSE;
  UdpConfig.AcceptPromiscuous  = FALSE;
  UdpConfig.AcceptAnyPort      = FALSE;
  UdpConfig.AllowDuplicatePort = FALSE;
  UdpConfig.TypeOfService      = 0;
  UdpConfig.TimeToLive         = 64;
  UdpConfig.DoNotFragment      = FALSE;
  UdpConfig.ReceiveTimeout     = 0;
  UdpConfig.TransmitTimeout    = 0;
  UdpConfig.UseDefaultAddress  = Config->UseDefaultSetting;
  UdpConfig.StationAddress     = Config->StationIp;
  UdpConfig.SubnetMask         = Config->SubnetMask;
  UdpConfig.StationPort        = Instance->McastPort;
  UdpConfig.RemotePort         = 0;

  Ip = HTONL (Instance->ServerIp);
  CopyMem (&UdpConfig.RemoteAddress, &Ip, sizeof (EFI_IPv4_ADDRESS));

  Status = McastIo->Protocol.Udp4->Configure (McastIo->Protocol.Udp4, &UdpConfig);

  if (EFI_ERROR (Status)) {
    return Status;
  }

  if (!Config->UseDefaultSetting && 
      !EFI_IP4_EQUAL (&mZeroIp4Addr, &Config->GatewayIp)) {
    //
    // The station IP address is manually configured and the Gateway IP is not 0.
    // Add the default route for this UDP instance.
    //
    Status = McastIo->Protocol.Udp4->Routes (
                                       McastIo->Protocol.Udp4, 
                                       FALSE,
                                       &mZeroIp4Addr,
                                       &mZeroIp4Addr,
                                       &Config->GatewayIp
                                       );
                             
    if (EFI_ERROR (Status)) {
      McastIo->Protocol.Udp4->Configure (McastIo->Protocol.Udp4, NULL);
      return Status;
    }
  }

  //
  // join the multicast group
  //
  Ip = HTONL (Instance->McastIp);
  CopyMem (&Group, &Ip, sizeof (EFI_IPv4_ADDRESS));

  return McastIo->Protocol.Udp4->Groups (McastIo->Protocol.Udp4, TRUE, &Group);
}
Exemplo n.º 4
0
/**
  Create a TCP socket with the specified configuration data. 

  @param[in]  Image      The handle of the driver image.
  @param[in]  Controller The handle of the controller.
  @param[in]  ConfigData The Tcp4 configuration data.
  @param[in]  Tcp4Io     The Tcp4Io.
  
  @retval EFI_SUCCESS    The TCP socket is created and configured.
  @retval Others         Failed to create the TCP socket or configure it.
**/
EFI_STATUS
Tcp4IoCreateSocket (
  IN EFI_HANDLE           Image,
  IN EFI_HANDLE           Controller,
  IN TCP4_IO_CONFIG_DATA  *ConfigData,
  IN TCP4_IO              *Tcp4Io
  )
{
  EFI_STATUS            Status;
  EFI_TCP4_PROTOCOL     *Tcp4;
  EFI_TCP4_CONFIG_DATA  Tcp4ConfigData;
  EFI_TCP4_OPTION       ControlOption;
  EFI_TCP4_ACCESS_POINT *AccessPoint;

  Tcp4Io->Handle = NULL;
  Tcp4Io->ConnToken.CompletionToken.Event = NULL;
  Tcp4Io->TxToken.CompletionToken.Event = NULL;
  Tcp4Io->RxToken.CompletionToken.Event = NULL;
  Tcp4Io->CloseToken.CompletionToken.Event = NULL;
  Tcp4 = NULL;

  //
  // Create the TCP4 child instance and get the TCP4 protocol.
  //
  Status = NetLibCreateServiceChild (
            Controller,
            Image,
            &gEfiTcp4ServiceBindingProtocolGuid,
            &Tcp4Io->Handle
            );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = gBS->OpenProtocol (
                  Tcp4Io->Handle,
                  &gEfiTcp4ProtocolGuid,
                  (VOID **)&Tcp4Io->Tcp4,
                  Image,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  Tcp4Io->Image       = Image;
  Tcp4Io->Controller  = Controller;
  Tcp4                = Tcp4Io->Tcp4;

  //
  // Set the configuration parameters.
  //
  ControlOption.ReceiveBufferSize       = 0x200000;
  ControlOption.SendBufferSize          = 0x200000;
  ControlOption.MaxSynBackLog           = 0;
  ControlOption.ConnectionTimeout       = 0;
  ControlOption.DataRetries             = 6;
  ControlOption.FinTimeout              = 0;
  ControlOption.TimeWaitTimeout         = 0;
  ControlOption.KeepAliveProbes         = 4;
  ControlOption.KeepAliveTime           = 0;
  ControlOption.KeepAliveInterval       = 0;
  ControlOption.EnableNagle             = FALSE;
  ControlOption.EnableTimeStamp         = FALSE;
  ControlOption.EnableWindowScaling     = TRUE;
  ControlOption.EnableSelectiveAck      = FALSE;
  ControlOption.EnablePathMtuDiscovery  = FALSE;

  Tcp4ConfigData.TypeOfService          = 8;
  Tcp4ConfigData.TimeToLive             = 255;
  Tcp4ConfigData.ControlOption          = &ControlOption;

  AccessPoint = &Tcp4ConfigData.AccessPoint;

  AccessPoint->UseDefaultAddress = FALSE;
  AccessPoint->StationPort = 0;
  AccessPoint->RemotePort = ConfigData->RemotePort;
  AccessPoint->ActiveFlag = TRUE;

  CopyMem (&AccessPoint->StationAddress, &ConfigData->LocalIp, sizeof (EFI_IPv4_ADDRESS));
  CopyMem (&AccessPoint->SubnetMask, &ConfigData->SubnetMask, sizeof (EFI_IPv4_ADDRESS));
  CopyMem (&AccessPoint->RemoteAddress, &ConfigData->RemoteIp, sizeof (EFI_IPv4_ADDRESS));

  //
  // Configure the TCP4 protocol.
  //
  Status = Tcp4->Configure (Tcp4, &Tcp4ConfigData);
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  if (!EFI_IP4_EQUAL (&ConfigData->Gateway, &mZeroIp4Addr)) {
    //
    // the gateway is not zero, add the default route by hand
    //
    Status = Tcp4->Routes (Tcp4, FALSE, &mZeroIp4Addr, &mZeroIp4Addr, &ConfigData->Gateway);
    if (EFI_ERROR (Status)) {
      goto ON_ERROR;
    }
  }
  //
  // Create events for variuos asynchronous operations.
  //
  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  Tcp4IoCommonNotify,
                  &Tcp4Io->IsConnDone,
                  &Tcp4Io->ConnToken.CompletionToken.Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  Tcp4IoCommonNotify,
                  &Tcp4Io->IsTxDone,
                  &Tcp4Io->TxToken.CompletionToken.Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  Tcp4IoCommonNotify,
                  &Tcp4Io->IsRxDone,
                  &Tcp4Io->RxToken.CompletionToken.Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  Status = gBS->CreateEvent (
                  EVT_NOTIFY_SIGNAL,
                  TPL_NOTIFY,
                  Tcp4IoCommonNotify,
                  &Tcp4Io->IsCloseDone,
                  &Tcp4Io->CloseToken.CompletionToken.Event
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  Tcp4Io->IsTxDone  = FALSE;
  Tcp4Io->IsRxDone  = FALSE;

  return EFI_SUCCESS;

ON_ERROR:

  if (Tcp4Io->RxToken.CompletionToken.Event != NULL) {
    gBS->CloseEvent (Tcp4Io->RxToken.CompletionToken.Event);
  }

  if (Tcp4Io->TxToken.CompletionToken.Event != NULL) {
    gBS->CloseEvent (Tcp4Io->TxToken.CompletionToken.Event);
  }

  if (Tcp4Io->ConnToken.CompletionToken.Event != NULL) {
    gBS->CloseEvent (Tcp4Io->ConnToken.CompletionToken.Event);
  }

  if (Tcp4 != NULL) {
    Tcp4->Configure (Tcp4, NULL);

    gBS->CloseProtocol (
          Tcp4Io->Handle,
          &gEfiTcp4ProtocolGuid,
          Image,
          Controller
          );
  }

  NetLibDestroyServiceChild (
    Controller,
    Image,
    &gEfiTcp4ServiceBindingProtocolGuid,
    Tcp4Io->Handle
    );

  return Status;
}