/* ARGSUSED */
static void
mvusb_attach(device_t parent, device_t self, void *aux)
{
struct mvusb_softc *sc = device_private(self);
struct marvell_attach_args *mva = aux;
usbd_status r;
aprint_normal(": Marvell USB 2.0 Interface\n");
aprint_naive("\n");
sc->sc.sc_dev = self;
sc->sc.sc_bus.hci_private = sc;
sc->sc_model = mva->mva_model;
sc->sc_rev = mva->mva_revision;
sc->sc_iot = mva->mva_iot;
/* Map I/O registers for marvell usb */
if (bus_space_subregion(mva->mva_iot, mva->mva_ioh, mva->mva_offset,
mva->mva_size, &sc->sc_ioh)) {
aprint_error_dev(self, "can't map registers\n");
return;
}
mvusb_init(sc, mva->mva_tags);
/* Map I/O registers for ehci */
sc->sc.sc_size = MARVELL_USB_EHCI_SIZE;
if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, MARVELL_USB_EHCI_BASE,
sc->sc.sc_size, &sc->sc.ioh)) {
aprint_error_dev(self, "can't subregion registers\n");
return;
}
sc->sc.iot = sc->sc_iot;
sc->sc.sc_bus.dmatag = mva->mva_dmat;
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc.sc_offs = EREAD1(&sc->sc, EHCI_CAPLENGTH);
DPRINTF(("%s: offs=%d\n", device_xname(self), sc->sc.sc_offs));
EOWRITE2(&sc->sc, EHCI_USBINTR, 0);
marvell_intr_establish(mva->mva_irq, IPL_USB, ehci_intr, sc);
sc->sc.sc_bus.usbrev = USBREV_2_0;
/* Figure out vendor for root hub descriptor. */
sc->sc.sc_id_vendor = 0x0000; /* XXXXX */
strcpy(sc->sc.sc_vendor, "Marvell");
sc->sc.sc_vendor_init = mvusb_vendor_init;
sc->sc.sc_vendor_port_status = mvusb_vendor_port_status;
r = ehci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
aprint_error_dev(self, "init failed, error=%d\n", r);
return;
}
/* Attach usb device. */
sc->sc.sc_child = config_found(self, &sc->sc.sc_bus, usbctlprint);
}
static void
ehci_obio_attach(device_t parent, device_t self, void *aux)
{
struct ehci_softc * const sc = device_private(self);
struct obio_attach_args * const obio = aux;
const char * const devname = device_xname(self);
usbd_status r;
sc->sc_dev = self;
sc->sc_bus.hci_private = sc;
sc->iot = obio->obio_iot;
aprint_naive(": EHCI USB controller\n");
aprint_normal(": EHCI USB controller\n");
/* Map I/O registers */
if (bus_space_map(sc->iot, obio->obio_addr, obio->obio_size, 0,
&sc->ioh)) {
aprint_error("%s: can't map memory space\n", devname);
return;
}
sc->sc_bus.dmatag = obio->obio_dmat;
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH);
DPRINTF(("%s: offs=%d\n", devname, sc->sc_offs));
EOWRITE2(sc, EHCI_USBINTR, 0);
bus_space_write_4(sc->iot, sc->ioh, EHCI_HCOTGDEV_INTR_MASK,
OTG_INT|DEV_INT);
if (obio->obio_intr != OBIOCF_INTR_DEFAULT) {
intr_establish(obio->obio_intr, IPL_USB, IST_LEVEL,
ehci_obio_intr, sc);
}
sc->sc_bus.usbrev = USBREV_2_0;
/* Figure out vendor for root hub descriptor. */
sc->sc_id_vendor = PCI_VENDOR_FARADAY;
strlcpy(sc->sc_vendor, "SL351x", sizeof(sc->sc_vendor));
r = ehci_init(sc);
if (r != USBD_NORMAL_COMPLETION) {
aprint_error("%s: init failed, error=%d\n", devname, r);
return;
}
/* Attach usb device. */
sc->sc_child = config_found(self, &sc->sc_bus, usbctlprint);
}
void
ehci_obio_attach(struct device *parent, struct device *self, void *aux)
{
struct ehci_softc *sc = (void *)self;
struct obio_attach_args *oa = aux;
usbd_status r;
int s;
sc->iot = oa->oa_iot;
sc->sc_size = 1028;
if (bus_space_map(sc->iot, oa->oa_offset + USB_EHCI_OFFSET,
sc->sc_size, 0, &sc->ioh)) {
printf(": can't map registers\n");
return;
}
sc->sc_id_vendor = PCI_VENDOR_FREESCALE;
strlcpy(sc->sc_vendor, "Freescale", sizeof sc->sc_vendor);
sc->sc_bus.dmatag = &ehci_bus_dma_tag;
bus_space_write_4(sc->iot, sc->ioh, USB_CONTROL, USB_CONTROL_USB_EN);
bus_space_write_4(sc->iot, sc->ioh, USB_SNOOP1, USB_SNOOP_2GB);
s = splhardusb();
sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH);
EOWRITE2(sc, EHCI_USBINTR, 0);
intr_establish(oa->oa_ivec, IST_LEVEL, IPL_USB, ehci_intr, sc,
sc->sc_bus.bdev.dv_xname);
r = ehci_init(sc);
if (r != USBD_NORMAL_COMPLETION) {
printf(": init failed, error=%d\n", r);
goto unmap_ret;
}
splx(s);
printf("\n");
/* Attach usb device. */
sc->sc_child = config_found((void *)sc, &sc->sc_bus, usbctlprint);
return;
unmap_ret:
bus_space_unmap(sc->iot, sc->ioh, sc->sc_size);
splx(s);
}
void
ehci_pci_attach(struct device *parent, struct device *self, void *aux)
{
struct ehci_pci_softc *sc = (struct ehci_pci_softc *)self;
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
pci_chipset_tag_t pc = pa->pa_pc;
pcitag_t tag = pa->pa_tag;
char const *intrstr;
pci_intr_handle_t ih;
const char *vendor;
char *devname = sc->sc.sc_bus.bdev.dv_xname;
usbd_status r;
int s;
/* Map I/O registers */
if (pci_mapreg_map(pa, PCI_CBMEM, PCI_MAPREG_TYPE_MEM, 0,
&sc->sc.iot, &sc->sc.ioh, NULL, &sc->sc.sc_size, 0)) {
printf(": can't map mem space\n");
return;
}
sc->sc_pc = pc;
sc->sc_tag = tag;
sc->sc.sc_bus.dmatag = pa->pa_dmat;
/* Disable interrupts, so we don't get any spurious ones. */
s = splhardusb();
sc->sc.sc_offs = EREAD1(&sc->sc, EHCI_CAPLENGTH);
DPRINTF(("%s: offs=%d\n", devname, sc->sc.sc_offs));
EOWRITE2(&sc->sc, EHCI_USBINTR, 0);
/* Handle quirks */
switch (PCI_VENDOR(pa->pa_id)) {
case PCI_VENDOR_ATI:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ATI_SB600_EHCI ||
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ATI_SB700_EHCI &&
pci_find_device(NULL, ehci_sb700_match))) {
pcireg_t value;
/* apply the ATI SB600/SB700 workaround */
value = pci_conf_read(sc->sc_pc, sc->sc_tag,
EHCI_SBx00_WORKAROUND_REG);
pci_conf_write(sc->sc_pc, sc->sc_tag,
EHCI_SBx00_WORKAROUND_REG, value |
EHCI_SBx00_WORKAROUND_ENABLE);
}
break;
case PCI_VENDOR_VIATECH:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_VIATECH_VT6202 &&
(PCI_REVISION(pa->pa_class) & 0xf0) == 0x60) {
pcireg_t value;
/*
* The VT6202 defaults to a 1 usec EHCI sleep time
* which hogs the PCI bus *badly*. Setting bit 5 of
* the register makes that sleep time use the conventional
* 10 usec.
*/
value = pci_conf_read(sc->sc_pc, sc->sc_tag,
EHCI_VT6202_WORKAROUND_REG);
pci_conf_write(sc->sc_pc, sc->sc_tag,
EHCI_VT6202_WORKAROUND_REG, value | 0x20000000);
}
break;
}
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
printf(": couldn't map interrupt\n");
goto unmap_ret;
}
intrstr = pci_intr_string(pc, ih);
sc->sc_ih = pci_intr_establish(pc, ih, IPL_USB | IPL_MPSAFE,
ehci_intr, sc, devname);
if (sc->sc_ih == NULL) {
printf(": couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
goto unmap_ret;
}
printf(": %s\n", intrstr);
switch(pci_conf_read(pc, tag, PCI_USBREV) & PCI_USBREV_MASK) {
case PCI_USBREV_PRE_1_0:
case PCI_USBREV_1_0:
case PCI_USBREV_1_1:
sc->sc.sc_bus.usbrev = USBREV_UNKNOWN;
printf("%s: pre-2.0 USB rev\n", devname);
goto disestablish_ret;
case PCI_USBREV_2_0:
sc->sc.sc_bus.usbrev = USBREV_2_0;
break;
default:
sc->sc.sc_bus.usbrev = USBREV_UNKNOWN;
break;
}
/* Figure out vendor for root hub descriptor. */
vendor = pci_findvendor(pa->pa_id);
sc->sc.sc_id_vendor = PCI_VENDOR(pa->pa_id);
if (vendor)
strlcpy(sc->sc.sc_vendor, vendor, sizeof(sc->sc.sc_vendor));
else
snprintf(sc->sc.sc_vendor, sizeof(sc->sc.sc_vendor),
"vendor 0x%04x", PCI_VENDOR(pa->pa_id));
/* Enable workaround for dropped interrupts as required */
if (sc->sc.sc_id_vendor == PCI_VENDOR_VIATECH)
sc->sc.sc_flags |= EHCIF_DROPPED_INTR_WORKAROUND;
ehci_pci_takecontroller(sc, 0);
r = ehci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
goto disestablish_ret;
}
/* Attach usb device. */
config_found(self, &sc->sc.sc_bus, usbctlprint);
splx(s);
return;
disestablish_ret:
pci_intr_disestablish(sc->sc_pc, sc->sc_ih);
unmap_ret:
bus_space_unmap(sc->sc.iot, sc->sc.ioh, sc->sc.sc_size);
splx(s);
}
void
imxehci_attach(struct device *parent, struct device *self, void *aux)
{
struct imxehci_softc *sc = (struct imxehci_softc *)self;
struct armv7_attach_args *aa = aux;
usbd_status r;
char *devname = sc->sc.sc_bus.bdev.dv_xname;
sc->sc.iot = aa->aa_iot;
sc->sc.sc_bus.dmatag = aa->aa_dmat;
sc->sc.sc_size = aa->aa_dev->mem[0].size;
/* Map I/O space */
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[0].addr,
aa->aa_dev->mem[0].size, 0, &sc->sc.ioh)) {
printf(": cannot map mem space\n");
goto out;
}
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[1].addr,
aa->aa_dev->mem[1].size, 0, &sc->uh_ioh)) {
printf(": cannot map mem space\n");
goto mem0;
}
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[2].addr,
aa->aa_dev->mem[2].size, 0, &sc->ph_ioh)) {
printf(": cannot map mem space\n");
goto mem1;
}
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[3].addr,
aa->aa_dev->mem[3].size, 0, &sc->nc_ioh)) {
printf(": cannot map mem space\n");
goto mem2;
}
printf("\n");
imxccm_enable_usboh3();
delay(1000);
if (aa->aa_dev->mem[0].addr == USBUH1_EHCI_ADDR) {
/* enable usb port power */
switch (board_id)
{
case BOARD_ID_IMX6_PHYFLEX:
imxgpio_set_dir(EHCI_PHYFLEX_USB_H1_PWR, IMXGPIO_DIR_OUT);
delay(10);
imxgpio_set_bit(EHCI_PHYFLEX_USB_H1_PWR);
delay(10);
break;
case BOARD_ID_IMX6_CUBOXI:
case BOARD_ID_IMX6_HUMMINGBOARD:
imxgpio_set_bit(EHCI_HUMMINGBOARD_USB_H1_PWR);
imxgpio_set_dir(EHCI_HUMMINGBOARD_USB_H1_PWR, IMXGPIO_DIR_OUT);
delay(10);
break;
case BOARD_ID_IMX6_SABRELITE:
imxgpio_clear_bit(EHCI_NITROGEN6X_USB_HUB_RST);
imxgpio_set_dir(EHCI_NITROGEN6X_USB_HUB_RST, IMXGPIO_DIR_OUT);
delay(1000 * 2);
imxgpio_set_bit(EHCI_NITROGEN6X_USB_HUB_RST);
delay(10);
break;
case BOARD_ID_IMX6_SABRESD:
imxgpio_set_bit(EHCI_SABRESD_USB_PWR);
imxgpio_set_dir(EHCI_SABRESD_USB_PWR, IMXGPIO_DIR_OUT);
delay(10);
break;
case BOARD_ID_IMX6_UTILITE:
imxgpio_clear_bit(EHCI_UTILITE_USB_HUB_RST);
imxgpio_set_dir(EHCI_UTILITE_USB_HUB_RST, IMXGPIO_DIR_OUT);
delay(10);
imxgpio_set_bit(EHCI_UTILITE_USB_HUB_RST);
delay(1000);
break;
}
/* disable the carger detection, else signal on DP will be poor */
imxccm_disable_usb2_chrg_detect();
/* power host 1 */
imxccm_enable_pll_usb2();
/* over current and polarity setting */
bus_space_write_4(sc->sc.iot, sc->nc_ioh, USBNC_USB_UH1_CTRL,
bus_space_read_4(sc->sc.iot, sc->nc_ioh, USBNC_USB_UH1_CTRL) |
(USBNC_USB_UH1_CTRL_OVER_CUR_POL | USBNC_USB_UH1_CTRL_OVER_CUR_DIS));
} else if (aa->aa_dev->mem[0].addr == USBOTG_EHCI_ADDR) {
/* enable usb port power */
switch (board_id)
{
case BOARD_ID_IMX6_CUBOXI:
case BOARD_ID_IMX6_HUMMINGBOARD:
imxgpio_set_dir(EHCI_HUMMINGBOARD_USB_OTG_PWR, IMXGPIO_DIR_OUT);
imxgpio_set_bit(EHCI_HUMMINGBOARD_USB_OTG_PWR);
delay(10);
break;
}
/* disable the carger detection, else signal on DP will be poor */
imxccm_disable_usb1_chrg_detect();
/* power host 0 */
imxccm_enable_pll_usb1();
/* over current and polarity setting */
bus_space_write_4(sc->sc.iot, sc->nc_ioh, USBNC_USB_OTG_CTRL,
bus_space_read_4(sc->sc.iot, sc->nc_ioh, USBNC_USB_OTG_CTRL) |
(USBNC_USB_OTG_CTRL_OVER_CUR_POL | USBNC_USB_OTG_CTRL_OVER_CUR_DIS));
}
bus_space_write_4(sc->sc.iot, sc->ph_ioh, USBPHY_CTRL_CLR,
USBPHY_CTRL_CLKGATE);
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc.sc_offs = EREAD1(&sc->sc, EHCI_CAPLENGTH);
EOWRITE2(&sc->sc, EHCI_USBINTR, 0);
/* Stop then Reset */
uint32_t val = EOREAD4(&sc->sc, EHCI_USBCMD);
val &= ~EHCI_CMD_RS;
EOWRITE4(&sc->sc, EHCI_USBCMD, val);
while (EOREAD4(&sc->sc, EHCI_USBCMD) & EHCI_CMD_RS)
;
val = EOREAD4(&sc->sc, EHCI_USBCMD);
val |= EHCI_CMD_HCRESET;
EOWRITE4(&sc->sc, EHCI_USBCMD, val);
while (EOREAD4(&sc->sc, EHCI_USBCMD) & EHCI_CMD_HCRESET)
;
/* Reset USBPHY module */
bus_space_write_4(sc->sc.iot, sc->ph_ioh, USBPHY_CTRL_SET, USBPHY_CTRL_SFTRST);
delay(10);
/* Remove CLKGATE and SFTRST */
bus_space_write_4(sc->sc.iot, sc->ph_ioh, USBPHY_CTRL_CLR,
USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
delay(10);
/* Power up the PHY */
bus_space_write_4(sc->sc.iot, sc->ph_ioh, USBPHY_PWD, 0);
/* enable FS/LS device */
bus_space_write_4(sc->sc.iot, sc->ph_ioh, USBPHY_CTRL_SET,
USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
/* set host mode */
EWRITE4(&sc->sc, EHCI_USBMODE,
EREAD4(&sc->sc, EHCI_USBMODE) | EHCI_USBMODE_HOST);
/* set to UTMI mode */
EOWRITE4(&sc->sc, EHCI_PORTSC(1),
EOREAD4(&sc->sc, EHCI_PORTSC(1)) & ~EHCI_PS_PTS_UTMI_MASK);
sc->sc_ih = arm_intr_establish(aa->aa_dev->irq[0], IPL_USB,
ehci_intr, &sc->sc, devname);
if (sc->sc_ih == NULL) {
printf(": unable to establish interrupt\n");
goto mem3;
}
strlcpy(sc->sc.sc_vendor, "i.MX6", sizeof(sc->sc.sc_vendor));
r = ehci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
goto intr;
}
config_found(self, &sc->sc.sc_bus, usbctlprint);
goto out;
intr:
arm_intr_disestablish(sc->sc_ih);
sc->sc_ih = NULL;
mem3:
bus_space_unmap(sc->sc.iot, sc->nc_ioh, aa->aa_dev->mem[3].addr);
mem2:
bus_space_unmap(sc->sc.iot, sc->ph_ioh, aa->aa_dev->mem[2].addr);
mem1:
bus_space_unmap(sc->sc.iot, sc->uh_ioh, aa->aa_dev->mem[1].addr);
mem0:
bus_space_unmap(sc->sc.iot, sc->sc.ioh, sc->sc.sc_size);
sc->sc.sc_size = 0;
out:
return;
}
void
imxehci_attach(struct device *parent, struct device *self, void *aux)
{
struct imxehci_softc *sc = (struct imxehci_softc *)self;
struct ehci_softc *esc;
struct armv7_attach_args *aa = aux;
struct fdt_memory hmem, pmem, mmem;
int irq, r;
sc->iot = aa->aa_iot;
sc->sc_dmat = aa->aa_dmat;
if (aa->aa_node) {
uint32_t ints[3];
void *node;
if (fdt_get_memory_address(aa->aa_node, 0, &hmem))
panic("%s: could not extract memory data from FDT",
__func__);
node = fdt_find_node_by_phandle_prop(aa->aa_node, "fsl,usbphy");
if (node == NULL || fdt_get_memory_address(node, 0, &pmem))
panic("%s: could not extract phy data from FDT",
__func__);
node = fdt_find_node_by_phandle_prop(aa->aa_node, "fsl,usbmisc");
if (node == NULL || fdt_get_memory_address(node, 0, &mmem))
panic("%s: could not extract phy data from FDT",
__func__);
/* TODO: Add interrupt FDT API. */
if (fdt_node_property_ints(aa->aa_node, "interrupts",
ints, 3) != 3)
panic("%s: could not extract interrupt data from FDT",
__func__);
irq = ints[1];
} else {
hmem.addr = aa->aa_dev->mem[0].addr;
hmem.size = aa->aa_dev->mem[0].size;
pmem.addr = aa->aa_dev->mem[1].addr;
pmem.size = aa->aa_dev->mem[1].size;
mmem.addr = aa->aa_dev->mem[2].addr;
mmem.size = aa->aa_dev->mem[2].size;
irq = aa->aa_dev->irq[0];
}
/* Map I/O space */
if (bus_space_map(sc->iot, hmem.addr, hmem.size, 0, &sc->uh_ioh)) {
printf(": cannot map mem space\n");
goto hmem;
}
sc->ioh = sc->uh_ioh + 0x100;
sc->sc_size = hmem.size;
if (bus_space_map(sc->iot, pmem.addr, pmem.size, 0, &sc->ph_ioh)) {
printf(": cannot map mem space\n");
goto pmem;
}
if (bus_space_map(sc->iot, mmem.addr, mmem.size, 0, &sc->nc_ioh)) {
printf(": cannot map mem space\n");
goto mmem;
}
clk_enable(clk_get("usboh3"));
delay(1000);
if (hmem.addr == USBUH1_ADDR) {
/* enable usb port power */
switch (board_id)
{
case BOARD_ID_IMX6_CUBOXI:
case BOARD_ID_IMX6_HUMMINGBOARD:
imxgpio_set_bit(EHCI_HUMMINGBOARD_USB_H1_PWR);
imxgpio_set_dir(EHCI_HUMMINGBOARD_USB_H1_PWR, IMXGPIO_DIR_OUT);
delay(10);
break;
case BOARD_ID_IMX6_SABRELITE:
imxgpio_clear_bit(EHCI_NITROGEN6X_USB_HUB_RST);
imxgpio_set_dir(EHCI_NITROGEN6X_USB_HUB_RST, IMXGPIO_DIR_OUT);
delay(1000 * 2);
imxgpio_set_bit(EHCI_NITROGEN6X_USB_HUB_RST);
delay(10);
break;
case BOARD_ID_IMX6_SABRESD:
imxgpio_set_bit(EHCI_SABRESD_USB_PWR);
imxgpio_set_dir(EHCI_SABRESD_USB_PWR, IMXGPIO_DIR_OUT);
delay(10);
break;
case BOARD_ID_IMX6_UTILITE:
imxgpio_clear_bit(EHCI_UTILITE_USB_HUB_RST);
imxgpio_set_dir(EHCI_UTILITE_USB_HUB_RST, IMXGPIO_DIR_OUT);
delay(10);
imxgpio_set_bit(EHCI_UTILITE_USB_HUB_RST);
delay(1000);
break;
}
/* disable the carger detection, else signal on DP will be poor */
imxccm_disable_usb2_chrg_detect();
/* power host 1 */
clk_enable(clk_get("pll7_usb_host"));
clk_enable(clk_get("usbphy2_gate"));
/* over current and polarity setting */
bus_space_write_4(sc->iot, sc->nc_ioh, USBNC_USB_UH1_CTRL,
bus_space_read_4(sc->iot, sc->nc_ioh, USBNC_USB_UH1_CTRL) |
(USBNC_USB_UH1_CTRL_OVER_CUR_POL | USBNC_USB_UH1_CTRL_OVER_CUR_DIS));
} else if (hmem.addr == USBOTG_ADDR) {
/* enable usb port power */
switch (board_id)
{
case BOARD_ID_IMX6_CUBOXI:
case BOARD_ID_IMX6_HUMMINGBOARD:
imxgpio_set_bit(EHCI_HUMMINGBOARD_USB_OTG_PWR);
imxgpio_set_dir(EHCI_HUMMINGBOARD_USB_OTG_PWR, IMXGPIO_DIR_OUT);
delay(10);
break;
}
/* disable the carger detection, else signal on DP will be poor */
imxccm_disable_usb1_chrg_detect();
/* power host 0 */
clk_enable(clk_get("pll3_usb_otg"));
clk_enable(clk_get("usbphy1_gate"));
/* over current and polarity setting */
bus_space_write_4(sc->iot, sc->nc_ioh, USBNC_USB_OTG_CTRL,
bus_space_read_4(sc->iot, sc->nc_ioh, USBNC_USB_OTG_CTRL) |
(USBNC_USB_OTG_CTRL_OVER_CUR_POL | USBNC_USB_OTG_CTRL_OVER_CUR_DIS));
}
bus_space_write_4(sc->iot, sc->ph_ioh, USBPHY_CTRL_CLR,
USBPHY_CTRL_CLKGATE);
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH);
EOWRITE2(sc, EHCI_USBINTR, 0);
/* Stop then Reset */
uint32_t val = EOREAD4(sc, EHCI_USBCMD);
val &= ~EHCI_CMD_RS;
EOWRITE4(sc, EHCI_USBCMD, val);
while (EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_RS)
;
val = EOREAD4(sc, EHCI_USBCMD);
val |= EHCI_CMD_HCRESET;
EOWRITE4(sc, EHCI_USBCMD, val);
while (EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_HCRESET)
;
/* Reset USBPHY module */
bus_space_write_4(sc->iot, sc->ph_ioh, USBPHY_CTRL_SET, USBPHY_CTRL_SFTRST);
delay(10);
/* Remove CLKGATE and SFTRST */
bus_space_write_4(sc->iot, sc->ph_ioh, USBPHY_CTRL_CLR,
USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
delay(10);
/* Power up the PHY */
bus_space_write_4(sc->iot, sc->ph_ioh, USBPHY_PWD, 0);
/* enable FS/LS device */
bus_space_write_4(sc->iot, sc->ph_ioh, USBPHY_CTRL_SET,
USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
/* set host mode */
EWRITE4(sc, EHCI_USBMODE,
EREAD4(sc, EHCI_USBMODE) | EHCI_USBMODE_HOST);
/* set to UTMI mode */
EOWRITE4(sc, EHCI_PORTSC(1),
EOREAD4(sc, EHCI_PORTSC(1)) & ~EHCI_PS_PTS_UTMI_MASK);
printf("\n");
if ((esc = (struct ehci_softc *)config_found(self, NULL, NULL)) == NULL)
goto mmem;
esc->iot = sc->iot;
esc->ioh = sc->ioh;
esc->sc_bus.dmatag = sc->sc_dmat;
esc->sc_offs = sc->sc_offs;
sc->sc_ih = arm_intr_establish(irq, IPL_USB,
ehci_intr, esc, esc->sc_bus.bdev.dv_xname);
if (sc->sc_ih == NULL) {
printf(": unable to establish interrupt\n");
return;
}
strlcpy(esc->sc_vendor, "i.MX6", sizeof(esc->sc_vendor));
r = ehci_init(esc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n",
esc->sc_bus.bdev.dv_xname, r);
goto intr;
}
printf("\n");
config_found((struct device *)esc, &esc->sc_bus, usbctlprint);
goto out;
intr:
arm_intr_disestablish(sc->sc_ih);
sc->sc_ih = NULL;
mmem:
bus_space_unmap(sc->iot, sc->nc_ioh, mmem.size);
pmem:
bus_space_unmap(sc->iot, sc->ph_ioh, pmem.size);
hmem:
bus_space_unmap(sc->iot, sc->uh_ioh, sc->sc_size);
sc->sc_size = 0;
out:
return;
}
void
ehci_cardbus_attach(struct device *parent, struct device *self, void *aux)
{
struct ehci_cardbus_softc *sc = (struct ehci_cardbus_softc *)self;
struct cardbus_attach_args *ca = aux;
cardbus_devfunc_t ct = ca->ca_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
pci_chipset_tag_t pc = ca->ca_pc;
cardbus_function_tag_t cf = ct->ct_cf;
pcireg_t csr;
usbd_status r;
const char *vendor;
const char *devname = sc->sc.sc_bus.bdev.dv_xname;
/* Map I/O registers */
if (Cardbus_mapreg_map(ct, CARDBUS_CBMEM, PCI_MAPREG_TYPE_MEM, 0,
&sc->sc.iot, &sc->sc.ioh, NULL, &sc->sc.sc_size)) {
printf(": can't map mem space\n");
return;
}
sc->sc_cc = cc;
sc->sc_cf = cf;
sc->sc_ct = ct;
sc->sc.sc_bus.dmatag = ca->ca_dmat;
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_MEM_ENABLE);
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
/* Enable the device. */
csr = pci_conf_read(pc, ca->ca_tag,
PCI_COMMAND_STATUS_REG);
pci_conf_write(pc, ca->ca_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MASTER_ENABLE
| PCI_COMMAND_MEM_ENABLE);
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc.sc_offs = EREAD1(&sc->sc, EHCI_CAPLENGTH);
EOWRITE2(&sc->sc, EHCI_USBINTR, 0);
sc->sc_ih = cardbus_intr_establish(cc, cf, ca->ca_intrline,
IPL_USB, ehci_intr, sc, devname);
if (sc->sc_ih == NULL) {
printf(": unable to establish interrupt\n");
return;
}
printf(": irq %d\n", ca->ca_intrline);
/* Figure out vendor for root hub descriptor. */
vendor = cardbus_findvendor(ca->ca_id);
sc->sc.sc_id_vendor = PCI_VENDOR(ca->ca_id);
if (vendor)
strlcpy(sc->sc.sc_vendor, vendor, sizeof(sc->sc.sc_vendor));
else
snprintf(sc->sc.sc_vendor, sizeof(sc->sc.sc_vendor),
"vendor 0x%04x", PCI_VENDOR(ca->ca_id));
r = ehci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
/* Avoid spurious interrupts. */
cardbus_intr_disestablish(sc->sc_cc, sc->sc_cf, sc->sc_ih);
sc->sc_ih = NULL;
return;
}
/* Attach usb device. */
config_found(self, &sc->sc.sc_bus, usbctlprint);
}
void
omehci_attach(struct device *parent, struct device *self, void *aux)
{
struct omehci_softc *sc = (struct omehci_softc *)self;
struct armv7_attach_args *aa = aux;
usbd_status r;
char *devname = sc->sc.sc_bus.bdev.dv_xname;
uint32_t i;
sc->sc.iot = aa->aa_iot;
sc->sc.sc_bus.dmatag = aa->aa_dmat;
sc->sc.sc_size = aa->aa_dev->mem[0].size;
/* set defaults */
for (i = 0; i < 3; i++) {
sc->phy_reset[i] = 0;
sc->port_mode[i] = EHCI_HCD_OMAP_MODE_UNKNOWN;
sc->reset_gpio_pin[i] = -1;
}
switch (board_id)
{
case BOARD_ID_OMAP4_PANDA:
sc->tll_avail = 0;
sc->port_mode[0] = EHCI_HCD_OMAP_MODE_PHY;
sc->early_init = omehci_v4_early_init;
break;
default:
break;
}
/* Map I/O space */
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[0].addr,
aa->aa_dev->mem[0].size, 0, &sc->sc.ioh)) {
printf(": cannot map mem space\n");
goto out;
}
if (bus_space_map(sc->sc.iot, aa->aa_dev->mem[1].addr,
aa->aa_dev->mem[1].size, 0, &sc->uhh_ioh)) {
printf(": cannot map mem space\n");
goto mem0;
}
if (sc->tll_avail &&
bus_space_map(sc->sc.iot, aa->aa_dev->mem[2].addr,
aa->aa_dev->mem[2].size, 0, &sc->tll_ioh)) {
printf(": cannot map mem space\n");
goto mem1;
}
printf("\n");
if (sc->early_init)
sc->early_init();
if (omehci_init(sc))
return;
/* Disable interrupts, so we don't get any spurious ones. */
sc->sc.sc_offs = EREAD1(&sc->sc, EHCI_CAPLENGTH);
EOWRITE2(&sc->sc, EHCI_USBINTR, 0);
sc->sc_ih = arm_intr_establish(aa->aa_dev->irq[0], IPL_USB,
ehci_intr, &sc->sc, devname);
if (sc->sc_ih == NULL) {
printf(": unable to establish interrupt\n");
printf("XXX - disable ehci and prcm");
goto mem2;
}
strlcpy(sc->sc.sc_vendor, "TI OMAP", sizeof(sc->sc.sc_vendor));
r = ehci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
printf("XXX - disable ehci and prcm");
goto intr;
}
config_found(self, &sc->sc.sc_bus, usbctlprint);
goto out;
intr:
arm_intr_disestablish(sc->sc_ih);
sc->sc_ih = NULL;
mem2:
bus_space_unmap(sc->sc.iot, sc->tll_ioh, aa->aa_dev->mem[2].size);
mem1:
bus_space_unmap(sc->sc.iot, sc->uhh_ioh, aa->aa_dev->mem[1].size);
mem0:
bus_space_unmap(sc->sc.iot, sc->sc.ioh, sc->sc.sc_size);
sc->sc.sc_size = 0;
out:
return;
}
