void s3cfb_cfg_gpio(struct platform_device *pdev)
{
int err;
/* add by cym 20150120 */
#if 1
err = gpio_request(EXYNOS4_GPC0(2), "VGA_EN");
if (err) {
printk(KERN_ERR "failed to request VGA_EN\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(2), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC0(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(2));
msleep(250);
err = gpio_request(EXYNOS4_GPL0(4), "BK_VDD_EN");
if (err) {
printk(KERN_ERR "failed to request BK_VDD_EN\n");
//return err;
}
gpio_direction_output(EXYNOS4_GPL0(4), 1);
s3c_gpio_cfgpin(EXYNOS4_GPL0(4), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL0(4));
printk("(%s, %d): BK_VDD_ON\n", __FUNCTION__, __LINE__);
msleep(100);
#endif
s3cfb_gpio_setup_24bpp(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2), S5P_GPIO_DRVSTR_LV4);
s3cfb_gpio_setup_24bpp(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2), S5P_GPIO_DRVSTR_LV4);
s3cfb_gpio_setup_24bpp(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2), S5P_GPIO_DRVSTR_LV4);
s3cfb_gpio_setup_24bpp(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2), S5P_GPIO_DRVSTR_LV4);
#if 1 // TC4
//LVDS_PWDN
err = gpio_request(EXYNOS4_GPL1(0), "GPL1_0");
if (err) {
printk(KERN_ERR "failed to request GPL1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPL1(0), 1);
s3c_gpio_cfgpin(EXYNOS4_GPL1(0), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL1(0));
printk("(%s, %d): LCD_PWDN ON\n", __FUNCTION__, __LINE__);
#endif
}
void midas_power_gpio_init(void)
{
#ifdef CONFIG_REGULATOR_MAX8997
int gpio;
gpio = EXYNOS4212_GPJ1(1);
gpio_request(gpio, "BUCK_SET1");
s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
gpio = EXYNOS4212_GPJ1(2);
gpio_request(gpio, "BUCK_SET2");
s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
gpio = EXYNOS4_GPL0(0);
gpio_request(gpio, "BUCK_SET3");
s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
#endif
}
{ MAX8997_LDO15, &ldo15_init_data, },
{ MAX8997_LDO16, &ldo16_init_data, },
{ MAX8997_LDO17, &ldo17_init_data, },
{ MAX8997_LDO18, &ldo18_init_data, },
};
struct max8997_platform_data exynos4_max8997_info = {
.irq_base = IRQ_BOARD_PMIC_START,
.num_regulators = ARRAY_SIZE(max8997_regulators),
.regulators = max8997_regulators,
.buck1_max_vol = 1100000,
.buck2_max_vol = 1100000,
.buck5_max_vol = 1100000,
.buck_set1 = EXYNOS4212_GPJ1(1),
.buck_set2 = EXYNOS4212_GPJ1(2),
.buck_set3 = EXYNOS4_GPL0(0),
#ifdef CONFIG_VIBETONZ
.motor = &max8997_motor,
#endif
};
#elif defined(CONFIG_REGULATOR_MAX77686)
/* max77686 */
#ifdef CONFIG_SND_SOC_WM8994
static struct regulator_consumer_supply ldo3_supply[] = {
REGULATOR_SUPPLY("AVDD2", NULL),
REGULATOR_SUPPLY("CPVDD", NULL),
REGULATOR_SUPPLY("DBVDD1", NULL),
REGULATOR_SUPPLY("DBVDD2", NULL),
REGULATOR_SUPPLY("DBVDD3", NULL),
};
},
}, {
.base = (S5P_VA_GPIO2 + 0xA0),
.eint_offset = 0x14,
.group = 19,
.chip = {
.base = EXYNOS4_GPK3(0),
.ngpio = EXYNOS4_GPIO_K3_NR,
.label = "GPK3",
},
}, {
.base = (S5P_VA_GPIO2 + 0xC0),
.eint_offset = 0x18,
.group = 20,
.chip = {
.base = EXYNOS4_GPL0(0),
.ngpio = EXYNOS4_GPIO_L0_NR,
.label = "GPL0",
},
}, {
.base = (S5P_VA_GPIO2 + 0xE0),
.eint_offset = 0x1C,
.group = 21,
.chip = {
.base = EXYNOS4_GPL1(0),
.ngpio = EXYNOS4_GPIO_L1_NR,
.label = "GPL1",
},
}, {
.base = (S5P_VA_GPIO2 + 0x100),
.eint_offset = 0x20,
{ MAX8997_ENVICHG, &max8997_vichg_data },
{ MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
{ MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
{ MAX8997_CHARGER_CV, &max8997_charger_cv_data },
{ MAX8997_CHARGER, &max8997_charger_data },
{ MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
};
static struct max8997_platform_data __initdata nuri_max8997_pdata = {
.wakeup = 1,
.num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
.regulators = nuri_max8997_regulators,
.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
.buck1_voltage[0] = 1350000, /* 1.35V */
.buck1_voltage[1] = 1300000, /* 1.3V */
.buck1_voltage[2] = 1250000, /* 1.25V */
.buck1_voltage[3] = 1200000, /* 1.2V */
.buck1_voltage[4] = 1150000, /* 1.15V */
.buck1_voltage[5] = 1100000, /* 1.1V */
.buck1_voltage[6] = 1000000, /* 1.0V */
.buck1_voltage[7] = 950000, /* 0.95V */
.buck2_voltage[0] = 1100000, /* 1.1V */
.buck2_voltage[1] = 1000000, /* 1.0V */
.buck2_voltage[2] = 950000, /* 0.95V */
.buck2_voltage[3] = 900000, /* 0.9V */
.buck2_voltage[4] = 1100000, /* 1.1V */
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF2(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF2(7), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF3(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF3(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPF3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4_GPL0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_SCL_1.8V */
{EXYNOS4_GPL0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_SDA_1.8V */
#endif
#if defined(CONFIG_QC_MODEM)
{EXYNOS4_GPL2(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK2_SEL */
{EXYNOS4_GPL2(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK3_SEL */
#endif
{EXYNOS4_GPX0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* ACC_INT */
{EXYNOS4_GPX0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
default:
printk(KERN_ERR "%s: invalid type:%d\n", __func__, cable_type);
return -EINVAL;
}
#ifdef CONFIG_JACK_MON
jack_event_handler("charger", is_cable_attached);
#endif
return 0;
}
static struct max8997_muic_data midas_muic_pdata = {
.usb_cb = midas_usb_cb,
.charger_cb = midas_charger_cb,
.gpio_usb_sel = EXYNOS4_GPL0(7), /* done */
.uart_path = -1, /* muic does not control uart path*/
};
#endif
/* vbatt device (for WM8994) */
static struct regulator_consumer_supply vbatt_supplies[] = {
REGULATOR_SUPPLY("LDO1VDD", NULL),
REGULATOR_SUPPLY("SPKVDD1", NULL),
REGULATOR_SUPPLY("SPKVDD2", NULL),
};
static struct regulator_init_data vbatt_initdata = {
.constraints = {
.always_on = 1,
},
/* add by cym 20121121 */
static int sr200pc20_power(int flag)
{
int err;
printk("cym: sensor is power %s\n",flag == 1 ?"on":"off");
//Attention: Power On the all the camera module when system turn on
//Here only control the reset&&powerdown pin
/* Camera A */
if(flag == 1)
{
//poweron
// for TC4 zhuxuezhen
//poweron
#ifndef CONFIG_TC4_EVT
regulator_enable(vdd18_cam_regulator);
udelay(10);
regulator_enable(vdd28_cam_regulator);
udelay(10);
regulator_enable(VDD28_AF);
udelay(10);
regulator_enable(VDD28_CAM);
udelay(10);
regulator_enable(VDD18_CAM);
udelay(10);
#endif
err = gpio_request(EXYNOS4_GPL0(3), "GPL0_3");
if (err)
printk(KERN_ERR "#### failed to request GPL0_3 ####\n");
s3c_gpio_setpull(EXYNOS4_GPL0(3), S3C_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS4_GPL0(3), 0);
gpio_free(EXYNOS4_GPL0(3));
//VDD
//PMIC_Control_Set(PMIC_CONTROL_VDD18_CAM,POWERON);
//reset
err = gpio_request(EXYNOS4_GPL0(1), "GPL0_1");
if (err)
printk(KERN_ERR "#### failed to request GPL0_1 ####\n");
s3c_gpio_setpull(EXYNOS4_GPL0(1), S3C_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS4_GPL0(1), 1);
msleep(5);
gpio_direction_output(EXYNOS4_GPL0(1), 0);
msleep(5);
gpio_direction_output(EXYNOS4_GPL0(1), 1);
gpio_free(EXYNOS4_GPL0(1));
msleep(1);
//VDD_PLL
//PMIC_Control_Set(PMIC_CONTROL_VDD28_CAM,POWERON);
}
else
{
// for TC4 zhuxuezhen
//PMIC_Control_Set(PMIC_CONTROL_VDD28_CAM,POWEROFF);
err = gpio_request(EXYNOS4_GPL0(1), "GPL0_1");
if (err)
printk(KERN_ERR "#### failed to request GPL0_1 ####\n");
s3c_gpio_setpull(EXYNOS4_GPL0(1), S3C_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS4_GPL0(1), 0);
gpio_free(EXYNOS4_GPL0(1));
//powerdown
err = gpio_request(EXYNOS4_GPL0(3), "GPL0_3");
if (err)
printk(KERN_ERR "#### failed to request GPL0_3 ####\n");
s3c_gpio_setpull(EXYNOS4_GPL0(3), S3C_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS4_GPL0(3), 1);
gpio_free(EXYNOS4_GPL0(3));
#ifndef CONFIG_TC4_EVT
regulator_disable(vdd18_cam_regulator);
udelay(10);
regulator_disable(vdd28_cam_regulator);
udelay(10);
regulator_disable(VDD28_AF);
udelay(10);
regulator_disable(VDD28_CAM);
udelay(10);
regulator_disable(VDD18_CAM);
udelay(10);
#endif
//PMIC_Control_Set(PMIC_CONTROL_VDD18_CAM,POWEROFF);
}
return 0;
}
{EXYNOS4_GPK2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK3(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK3(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL0(4), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN */
/* {EXYNOS4_GPL0(5), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
/* {EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
/* {EXYNOS4_GPL1(2), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL2(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
int s3cfb_backlight_off(struct platform_device *pdev)
{
int err;
//err = gpio_request(EXYNOS4_GPD0(1), "GPD0");
//if (err) {
// printk(KERN_ERR "failed to request GPD0 for "
// "lcd backlight control\n");
// return err;
//}
/* modify by cym 20121017 */
#if 0
gpio_direction_output(EXYNOS4_GPD0(1), 0);
//gpio_free(EXYNOS4_GPD0(1));
//LED_EN18
err = gpio_request(EXYNOS4_GPC1(1), "GPC1_1");
if (err) {
printk(KERN_ERR "failed to request GPC1_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC1(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC1(1));
//VLED_EN
err = gpio_request(EXYNOS4_GPC1(2), "GPC1_2");
if (err) {
printk(KERN_ERR "failed to request GPC1_2 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC1(2), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC1(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC1(2));
//VLED_ON
err = gpio_request(EXYNOS4_GPC0(1), "GPC0_1");
if (err) {
printk(KERN_ERR "failed to request GPC0_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC0(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(1));
#else
//gpio_direction_output(EXYNOS4_GPD0(1), 0);
//gpio_free(EXYNOS4_GPD0(1));
//printk("(%s, %d): LCD_PWM_OFF\n", __FUNCTION__, __LINE__);
#if 0
//TP1_EN
err = gpio_request(EXYNOS4_GPL0(2), "TP1_EN");
if (err) {
printk(KERN_ERR "failed to request TP1_EN for "
"I2C control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPL0(2), 0);
s3c_gpio_cfgpin(EXYNOS4_GPL0(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL0(2));
mdelay(5);
printk("(%s, %d): TP1_EN_OFF\n", __FUNCTION__, __LINE__);
#endif
//VLED_ON
#if 0
err = gpio_request(EXYNOS4_GPC0(1), "GPC0_1");
if (err) {
printk(KERN_ERR "failed to request GPC0_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC0(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(1));
printk("(%s, %d): VLED_OFF\n", __FUNCTION__, __LINE__);
#endif
#endif
/* end modify */
/* add by cym 20150120 */
#if 1
err = gpio_request(EXYNOS4_GPD0(1), "GPD0_1");
if (err) {
printk(KERN_ERR "failed to request GPD0 for "
"lcd backlight control\n");
//return err;
}
gpio_direction_output(EXYNOS4_GPD0(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPD0(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPD0(1));
printk("(%s, %d): LCD_PWM_OFF\n", __FUNCTION__, __LINE__);
#endif
//LVDS_PWDN
err = gpio_request(EXYNOS4_GPL1(0), "GPL1_0");
if (err) {
printk(KERN_ERR "failed to request GPL1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPL1(0), 0);
s3c_gpio_cfgpin(EXYNOS4_GPL1(0), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL1(0));
#if 0
err = gpio_request_one(EXYNOS4_GPL1(1), 0, "GPL1_1");
if (err) {
printk(KERN_ERR "failed to request GPL1_1 for "
"4.3 LCD control\n");
return err;
}
s3c_gpio_setpull(EXYNOS4_GPL1(1), S3C_GPIO_PULL_UP);
gpio_set_value(EXYNOS4_GPL1(1), 1);
gpio_free(EXYNOS4_GPL1(1));
#endif
/* add by cym 20141125 */
err = gpio_request(EXYNOS4_GPC0(2), "VGA_EN");
if (err) {
printk(KERN_ERR "failed to request VGA_EN\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(2), 0);
s3c_gpio_cfgpin(EXYNOS4_GPC0(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(2));
printk("(%s, %d): VGA_EN_OFF\n", __FUNCTION__, __LINE__);
/* end add */
/* add by cym 20150120 */
err = gpio_request(EXYNOS4_GPL0(4), "BK_VDD_EN");
if (err) {
printk(KERN_ERR "failed to request BK_VDD_EN for\n");
return err;
}
gpio_direction_output(EXYNOS4_GPL0(4), 0);
s3c_gpio_cfgpin(EXYNOS4_GPL0(4), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL0(4));
printk("(%s, %d): BK_VDD_OFF\n", __FUNCTION__, __LINE__);
/* end add */
return 0;
}
int s3cfb_backlight_on(struct platform_device *pdev)
{
int err;
#if 0
//VLED_EN
err = gpio_request(EXYNOS4_GPC1(2), "GPC1_2");
if (err) {
printk(KERN_ERR "failed to request GPC1_2 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC1(2), 1);
s3c_gpio_cfgpin(EXYNOS4_GPC1(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC1(2));
mdelay(5);
printk("(%s, %d): BK_LCD_EN\n", __FUNCTION__, __LINE__);
#endif
/*modify by cym 20121017 */
#if 0
//VLED_ON
err = gpio_request(EXYNOS4_GPC0(1), "GPC0_1");
if (err) {
printk(KERN_ERR "failed to request GPC0_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(1), 1);
s3c_gpio_cfgpin(EXYNOS4_GPC0(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(1));
mdelay(5);
//err = gpio_request(EXYNOS4_GPD0(1), "GPD0_1");
if (err) {
printk(KERN_ERR "failed to request GPD0 for "
"lcd backlight control\n");
//return err;
}
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_direction_output(EXYNOS4_GPD0(1), 1);
gpio_free(EXYNOS4_GPD0(1));
#else
gpio_direction_output(EXYNOS4_GPD0(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPD0(1), EXYNOS4_GPD_0_1_TOUT_1);
//gpio_free(EXYNOS4_GPD0(1));
#endif
mdelay(5);
//LED_EN18
err = gpio_request(EXYNOS4_GPC1(1), "GPC1_1");
if (err) {
printk(KERN_ERR "failed to request GPC1_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC1(1), 1);
s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC1(1));
mdelay(5);
#else
//VLED_ON
#if 0
err = gpio_request(EXYNOS4_GPC0(1), "GPC0_1");
if (err) {
printk(KERN_ERR "failed to request GPC0_1 for "
"lcd power control\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(1), 1);
s3c_gpio_cfgpin(EXYNOS4_GPC0(1), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(1));
printk("(%s, %d): VLED_ON\n", __FUNCTION__, __LINE__);
#endif
//mdelay(5);
mdelay(250);
//PWM
err = gpio_request(EXYNOS4_GPD0(1), "GPD0_1");
if (err) {
printk(KERN_ERR "failed to request GPD0 for "
"lcd backlight control\n");
//return err;
}
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_direction_output(EXYNOS4_GPD0(1), 1);
gpio_free(EXYNOS4_GPD0(1));
#else
/* modify by cym 20130417 for TSC2007 TouchScreen */
//#ifdef CONFIG_TOUCHSCREEN_TSC2007
// gpio_direction_output(EXYNOS4_GPD0(1), 0);
//#else
gpio_direction_output(EXYNOS4_GPD0(1), 0);
s3c_gpio_cfgpin(EXYNOS4_GPD0(1), EXYNOS4_GPD_0_1_TOUT_1);
gpio_free(EXYNOS4_GPD0(1));
printk("(%s, %d): LCD_PWM_ON\n", __FUNCTION__, __LINE__);
//#endif
/* end modify */
#endif
mdelay(5);
#if 0
//TP1_EN
err = gpio_request(EXYNOS4_GPL0(2), "TP1_EN");
if (err) {
printk(KERN_ERR "failed to request TP1_EN for "
"I2C control\n");
return err;
}
//because in uboot we enable,we want to enable it again we must disable it 20121109
//gpio_direction_output(EXYNOS4_GPL0(2), 0); 20130508
//mdelay(100);
gpio_direction_output(EXYNOS4_GPL0(2), 1);
s3c_gpio_cfgpin(EXYNOS4_GPL0(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPL0(2));
printk("(%s, %d): TP1_EN_ON\n", __FUNCTION__, __LINE__);
mdelay(5);
#endif
#endif
#if 1
err = gpio_request_one(EXYNOS4_GPC0(2), 0, "GPC0_2");
if (err) {
printk(KERN_ERR "failed to request GPC0_2 for "
"4.3 LCD control\n");
return err;
}
s3c_gpio_setpull(EXYNOS4_GPC0(2), S3C_GPIO_PULL_UP);
//gpio_set_value(EXYNOS4_GPC0(2), 0);
//mdelay(10);
gpio_set_value(EXYNOS4_GPC0(2), 1);
gpio_free(EXYNOS4_GPC0(2));
#endif
#if 0
err = gpio_request_one(EXYNOS4_GPL1(1), 0, "GPL1_1");
if (err) {
printk(KERN_ERR "failed to request GPL1_1 for "
"4.3 LCD control\n");
return err;
}
s3c_gpio_setpull(EXYNOS4_GPL1(1), S3C_GPIO_PULL_UP);
gpio_set_value(EXYNOS4_GPL1(1), 0);
gpio_free(EXYNOS4_GPL1(1));
#endif
/*end modify */
/* add by cym 20141125 */
err = gpio_request(EXYNOS4_GPC0(2), "VGA_EN");
if (err) {
printk(KERN_ERR "failed to request VGA_EN\n");
return err;
}
gpio_direction_output(EXYNOS4_GPC0(2), 1);
s3c_gpio_cfgpin(EXYNOS4_GPC0(2), S3C_GPIO_OUTPUT);
gpio_free(EXYNOS4_GPC0(2));
printk("(%s, %d): VGA_EN_ON\n", __FUNCTION__, __LINE__);
/* end add */
return 0;
}
{EXYNOS4_GPK2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK3(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK3(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
#if defined(CONFIG_SEC_MODEM)
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* ACTIVE_STATE_HSIC */
#else
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* PS_ALS_SCL_1.8V */
{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* PS_ALS_SDA_1.8V */
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC(IRDA_CONTROL) */
{EXYNOS4_GPL0(4), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN */
/* {EXYNOS4_GPL0(5), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
/* {EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
#if defined(CONFIG_SEC_MODEM)
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* PDA_ACTIVE */
#else
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* T_FLASH_CMD */
{EXYNOS4_GPK2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* T_FLASH_D(0) */
{EXYNOS4_GPK2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* T_FLASH_D(1) */
{EXYNOS4_GPK2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* T_FLASH_D(2) */
{EXYNOS4_GPK2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* T_FLASH_D(3) */
{EXYNOS4_GPK3(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_CLK */
{EXYNOS4_GPK3(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_CMD */
{EXYNOS4_GPK3(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK3(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_D(0) */
{EXYNOS4_GPK3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_D(1) */
{EXYNOS4_GPK3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_D(2) */
{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_D(3) */
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#if defined(CONFIG_MACH_BAFFIN_KOR_LGT)
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* GPIO_FM34_PWDN */
#elif defined(CONFIG_MACH_SUPERIOR_KOR_SKT)
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* LINEOUT_EN */
#else
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
{EXYNOS4_GPL0(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
/* {EXYNOS4_GPL0(5), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* BT_EN */
/* {EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPD0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPD0(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPD1(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* NFC_SDA_1.8V */
{EXYNOS4_GPD1(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* NFC_SCL_1.8V */
{EXYNOS4_GPD1(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* GSENSE_SDA_1.8V */
{EXYNOS4_GPD1(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* GSENSE_SCL_1.8V */
{EXYNOS4_GPL0(3), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* POGO_VBATT_EN */
{EXYNOS4_GPL0(4), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* POGO_VBUS_EN */
{EXYNOS4_GPX0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_INT */
{EXYNOS4_GPX0(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPX0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPX0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPX0(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPX0(7), S3C_GPIO_SFN(0xF), S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4210_GPJ1(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4210_GPJ1(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
{EXYNOS4210_GPJ1(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
#endif
{EXYNOS4_GPK1(1), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1},
{EXYNOS4_GPK2(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_SDA_2.8V */
#if defined(CONFIG_TARGET_LOCALE_NA)
/* GPIO_BT_EN */
{EXYNOS4_GPL0(4), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV4},
/* GPIO_BT_nRST */
{EXYNOS4_GPL1(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV4},
#endif /*CONFIG_TARGET_LOCALE_NA*/
#if defined(CONFIG_TARGET_LOCALE_NA)
/* PS_ALS_SCL_2.8V */
{EXYNOS4_GPK3(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1},
/* NC */
/*BUCK2_EN for PMIC 8997*/
{EXYNOS4_GPL0(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_ZERO,
S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},
/*WLAN_EN*/
#include <linux/regulator/consumer.h>
//#include "gps.h"
#include <linux/delay.h>
#define RST_DEBUG
#ifdef RST_DEBUG
#define DPRINTK(x...) printk("RST_CTL DEBUG:" x)
#else
#define DPRINTK(x...)
#endif
#define DRIVER_NAME "rst"
static int rst_gpios[] = {
EXYNOS4_GPZ(6),
EXYNOS4_GPL0(2),
};
#define RST_NUM ARRAY_SIZE(rst_gpios)
int rst_open(struct inode *inode,struct file *filp)
{
DPRINTK("Device Opened Success!\n");
return nonseekable_open(inode,filp);
}
int rst_close(struct inode *inode,struct file *filp)
{
DPRINTK("Device Closed Success!\n");
return 0;
}
{EXYNOS4_GPK2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK3(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK3(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL0(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPL0(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL1(2), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL2(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL2(2), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
{EXYNOS4_GPK3(0), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_CLK */ //??
{EXYNOS4_GPK3(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* WLAN_SDIO_CMD */ //??
{EXYNOS4_GPK3(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPK3(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
{EXYNOS4_GPL0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */ // ??
{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* TOUCH_SCL */
{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* TOUCH_SDA */
{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* VPS_SOUND_EN */
{EXYNOS4_GPL0(4), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN */
/* {EXYNOS4_GPL0(5), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* BT_EN */
/* {EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */ //??
{EXYNOS4_GPL1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */ //??
/* {EXYNOS4_GPL1(2), S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, */
{EXYNOS4_GPL2(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GYRO_DE */
{EXYNOS4_GPL2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
{EXYNOS4_GPL2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GPS_EN */
