/*
============
EndBSPFile
============
*/
void EndBSPFile( void ){
char path[1024];
#if 0
int len;
byte *buf;
#endif
EmitBrushes();
EmitPlanes();
UnparseEntities();
// load the pop
#if 0
sprintf( path, "%s/pics/pop.lmp", gamedir );
len = LoadFile( path, &buf );
memcpy( dpop, buf, sizeof( dpop ) );
free( buf );
#endif
// write the map
sprintf( path, "%s.bsp", source );
Sys_Printf( "Writing %s\n", path );
WriteBSPFile( path );
}
/**
* @brief Finishes a new bsp and writes to disk
* @sa BeginBSPFile
*/
void EndBSPFile (const char* filename)
{
EmitBrushes();
EmitPlanes();
UnparseEntities();
/* write the map */
Verb_Printf(VERB_LESS, "Writing %s\n", filename);
WriteBSPFile(filename);
}
/*
============
EndBSPFile
============
*/
void EndBSPFile (void)
{
// Mark noshadow faces.
MarkNoShadowFaces();
EmitBrushes ();
EmitPlanes ();
// stick flat normals at the verts
SaveVertexNormals();
// Figure out lightmap extents for all faces.
UpdateAllFaceLightmapExtents();
// Generate geometry and lightmap alpha for displacements.
EmitDispLMAlphaAndNeighbors();
// Emit overlay data.
Overlay_EmitOverlayFaces();
OverlayTransition_EmitOverlayFaces();
// phys collision needs dispinfo to operate (needs to generate phys collision for displacement surfs)
EmitPhysCollision();
// We can't calculate this properly until vvis (since we need vis to do this), so we set
// to zero everywhere by default.
ClearDistToClosestWater();
// Emit static props found in the .vmf file
EmitStaticProps();
// Place detail props found in .vmf and based on material properties
EmitDetailObjects();
// Compute bounds after creating disp info because we need to reference it
ComputeBoundsNoSkybox();
// Make sure that we have a water lod control eneity if we have water in the map.
EnsurePresenceOfWaterLODControlEntity();
// Doing this here because stuff about may filter out entities
UnparseEntities ();
// remove unused texinfos
CompactTexinfos();
// Figure out which faces want macro textures.
DiscoverMacroTextures();
char fileName[1024];
V_strncpy( fileName, source, sizeof( fileName ) );
V_DefaultExtension( fileName, ".bsp", sizeof( fileName ) );
Msg ("Writing %s\n", fileName);
WriteBSPFile (fileName);
}
/*
============
EndBSPFile
============
*/
void EndBSPFile( void ) {
char path[1024];
EmitPlanes ();
UnparseEntities ();
// write the map
sprintf (path, "%s.bsp", source);
_printf ("Writing %s\n", path);
WriteBSPFile (path);
}
/*
* @brief
*/
void EndBSPFile(void) {
EmitBrushes();
EmitPlanes();
EmitAreaPortals();
UnparseEntities();
// now that the verts have been resolved, align the normals count
d_bsp.num_normals = d_bsp.num_vertexes;
// write the map
Com_Verbose("Writing %s\n", bsp_name);
WriteBSPFile(bsp_name);
}
void EndBSPFile( void ){
char path[ 1024 ];
EmitPlanes();
numBSPEntities = numEntities;
UnparseEntities();
/* write the surface extra file */
WriteSurfaceExtraFile( source );
/* write the bsp */
sprintf( path, "%s.bsp", source );
Sys_Printf( "Writing %s\n", path );
WriteBSPFile( path );
}
/*
============
EndBSPFile
============
*/
void EndBSPFile( void ) {
#if 0
char path[1024];
int len;
byte *buf;
#endif
EmitBrushes();
EmitPlanes();
Q2_UnparseEntities();
// load the pop
#if 0
sprintf( path, "%s/pics/pop.lmp", gamedir );
len = LoadFile( path, &buf );
memcpy( dpop, buf, sizeof( dpop ) );
FreeMemory( buf );
#endif
}
void EndBSPFile( qboolean do_write ){
char path[ 1024 ];
Sys_FPrintf( SYS_VRB, "--- EndBSPFile ---\n" );
EmitPlanes();
numBSPEntities = numEntities;
UnparseEntities();
if ( do_write ) {
/* write the surface extra file */
WriteSurfaceExtraFile( source );
/* write the bsp */
sprintf( path, "%s.bsp", source );
Sys_Printf( "Writing %s\n", path );
WriteBSPFile( path );
}
}
void EndBSPFile( void ){
char path[ 1024 ];
Sys_FPrintf( SYS_VRB, "--- EndBSPFile ---\n" );
EmitPlanes();
numBSPEntities = numEntities;
UnparseEntities();
/* write the surface extra file */
WriteSurfaceExtraFile( source );
#ifdef SMOKINGUNS
//only create tex file if it is the first compile
WriteTexFile (source);
#endif
/* write the bsp */
sprintf( path, "%s.bsp", source );
Sys_Printf( "Writing %s\n", path );
WriteBSPFile( path );
}
/**
* @brief Calculates the routing of a map
* @sa CheckUnit
* @sa CheckConnections
* @sa ProcessWorldModel
*/
void DoRouting (void)
{
int i;
byte* data;
vec3_t mins, maxs;
pos3_t pos;
/* Turn on trace debugging if requested. */
if (config.generateDebugTrace)
debugTrace = true;
/* Record the current mapTiles[0] state so we can remove all CLIPS when done. */
PushInfo();
/* build tracing structure */
EmitBrushes();
EmitPlanes(); /** This is needed for tracing to work!!! */
/** @note LEVEL_TRACING is not an actual level */
MakeTracingNodes(LEVEL_ACTORCLIP + 1);
/* Reset the whole block of map data to 0 */
Nmap.init();
/* get world bounds for optimizing */
RT_GetMapSize(&mapTiles, mins, maxs);
/* Com_Printf("Vectors: (%f, %f, %f) to (%f, %f, %f)\n", mins[0], mins[1], mins[2], maxs[0], maxs[1], maxs[2]); */
VecToPos(mins, wpMins);
VecToPos(maxs, wpMaxs);
/* Verify the world extents are not lopsided. */
assert(wpMins[0] <= wpMaxs[0]);
assert(wpMins[1] <= wpMaxs[1]);
assert(wpMins[2] <= wpMaxs[2]);
/* scan area heights */
RunSingleThreadOn(CheckUnitThread, PATHFINDING_WIDTH * PATHFINDING_WIDTH * ACTOR_MAX_SIZE, config.verbosity >= VERB_NORMAL, "UNITCHECK");
/* scan connections */
RunSingleThreadOn(CheckConnectionsThread, PATHFINDING_WIDTH * PATHFINDING_WIDTH * (CORE_DIRECTIONS / (1 + RT_IS_BIDIRECTIONAL)) * (ACTOR_MAX_SIZE), config.verbosity >= VERB_NORMAL, "CONNCHECK");
/* Try to shrink the world bounds along the x and y coordinates */
for (i = 0; i < 2; i++) { /* for x and y, but not z */
int j = i ^ 1; /* if i points to x, j points to y and vice versa */
/* Increase the mins */
while (wpMaxs[j] > wpMins[j]) {
VectorSet(pos, wpMins[0], wpMins[1], wpMaxs[2]);
for (pos[i] = wpMins[i]; pos[i] <= wpMaxs[i]; pos[i]++) { /* for all cells in an x or y row */
if (Nmap.getFloor(1, pos[0], pos[1], wpMaxs[2]) + wpMaxs[2] * CELL_HEIGHT != -1) /* no floor ? */
break;
}
if (pos[i] <= wpMaxs[i]) /* found a floor before the end of the row ? */
break; /* break while */
wpMins[j]++; /* if it was an x-row, increase y-value of mins and vice versa */
}
/* Decrease the maxs */
while (wpMaxs[j] > wpMins[j]) {
VectorCopy(wpMaxs, pos);
for (pos[i] = wpMins[i]; pos[i] <= wpMaxs[i]; pos[i]++) {
if (Nmap.getFloor(1, pos[0], pos[1], wpMaxs[2]) + wpMaxs[2] * CELL_HEIGHT != -1)
break;
}
if (pos[i] <= wpMaxs[i])
break;
wpMaxs[j]--;
}
}
/* Output the floor trace file if set */
if (config.generateTraceFile) {
RT_WriteCSVFiles(Nmap, baseFilename, wpMins, wpMaxs);
}
/* store the data */
data = curTile->routedata;
for (i = 0; i < 3; i++)
wpMins[i] = LittleLong(wpMins[i]);
data = CompressRouting((byte*)wpMins, data, sizeof(wpMins));
for (i = 0; i < 3; i++)
wpMaxs[i] = LittleLong(wpMaxs[i]);
data = CompressRouting((byte*)wpMaxs, data, sizeof(wpMaxs));
data = CompressRouting((byte*)&Nmap, data, sizeof(Nmap));
curTile->routedatasize = data - curTile->routedata;
/* Ensure that we did not exceed our allotment of memory for this data. */
assert(curTile->routedatasize <= MAX_MAP_ROUTING);
/* Remove the CLIPS fom the tracing structure by resetting it. */
PopInfo();
}
int main (int argc, char **argv)
{
int i, j;
int hull;
entity_t *ent;
char source[1024];
char name[1024];
double start, end;
printf( "qcsg.exe v2.8 (%s)\n", __DATE__ );
printf ("---- qcsg ----\n" );
for (i=1 ; i<argc ; i++)
{
if (!strcmp(argv[i],"-threads"))
{
numthreads = atoi (argv[i+1]);
i++;
}
else if (!strcmp(argv[i],"-glview"))
{
glview = true;
}
else if (!strcmp(argv[i], "-v"))
{
printf ("verbose = true\n");
verbose = true;
}
else if (!strcmp(argv[i], "-draw"))
{
printf ("drawflag = true\n");
drawflag = true;
}
else if (!strcmp(argv[i], "-noclip"))
{
printf ("noclip = true\n");
noclip = true;
}
else if (!strcmp(argv[i], "-onlyents"))
{
printf ("onlyents = true\n");
onlyents = true;
}
else if (!strcmp(argv[i], "-nowadtextures"))
{
printf ("wadtextures = false\n");
wadtextures = false;
}
else if (!strcmp(argv[i], "-wadinclude"))
{
pszWadInclude[nWadInclude++] = strdup( argv[i + 1] );
i++;
}
else if( !strcmp( argv[ i ], "-proj" ) )
{
strcpy( qproject, argv[ i + 1 ] );
i++;
}
else if (!strcmp(argv[i], "-hullfile"))
{
hullfile = true;
strcpy( qhullfile, argv[i + 1] );
i++;
}
else if (argv[i][0] == '-')
Error ("Unknown option \"%s\"", argv[i]);
else
break;
}
if (i != argc - 1)
Error ("usage: qcsg [-nowadtextures] [-wadinclude <name>] [-draw] [-glview] [-noclip] [-onlyents] [-proj <name>] [-threads #] [-v] [-hullfile <name>] mapfile");
SetThreadPriority(GetCurrentThread(),THREAD_PRIORITY_ABOVE_NORMAL);
start = I_FloatTime ();
CheckHullFile( hullfile, qhullfile );
ThreadSetDefault ();
SetQdirFromPath (argv[i]);
strcpy (source, ExpandArg (argv[i]));
COM_FixSlashes(source);
StripExtension (source);
strcpy (name, ExpandArg (argv[i]));
DefaultExtension (name, ".map"); // might be .reg
//
// if onlyents, just grab the entites and resave
//
if (onlyents && !glview)
{
char out[1024];
int old_entities;
sprintf (out, "%s.bsp", source);
LoadBSPFile (out);
// Get the new entity data from the map file
LoadMapFile (name);
// Write it all back out again.
WriteBSP (source);
end = I_FloatTime ();
printf ("%5.0f seconds elapsed\n", end-start);
return 0;
}
//
// start from scratch
//
LoadMapFile (name);
RunThreadsOnIndividual (nummapbrushes, true, CreateBrush);
BoundWorld ();
qprintf ("%5i map planes\n", nummapplanes);
for (i=0 ; i<NUM_HULLS ; i++)
{
char name[1024];
if (glview)
sprintf (name, "%s.gl%i",source, i);
else
sprintf (name, "%s.p%i",source, i);
out[i] = fopen (name, "w");
if (!out[i])
Error ("Couldn't open %s",name);
}
ProcessModels ();
qprintf ("%5i csg faces\n", c_csgfaces);
qprintf ("%5i used faces\n", c_outfaces);
qprintf ("%5i tiny faces\n", c_tiny);
qprintf ("%5i tiny clips\n", c_tiny_clip);
for (i=0 ; i<NUM_HULLS ; i++)
fclose (out[i]);
if (!glview)
{
EmitPlanes ();
WriteBSP (source);
}
end = I_FloatTime ();
printf ("%5.0f seconds elapsed\n", end-start);
return 0;
}
