// searches for a specific edge
EdgeIterator FindEdge(const NodeIterator from, const NodeIterator to) const
{
for (const auto i : osrm::irange(BeginEdges(from), EndEdges(from)))
{
if (to == edge_list[i].target)
{
return i;
}
}
return EndEdges(from);
}
// searches for a specific edge
EdgeIterator FindEdge(const NodeIterator from, const NodeIterator to) const
{
for (const auto i : osrm::irange(BeginEdges(from), EndEdges(from)))
{
if (to == edge_array[i].target)
{
return i;
}
}
return SPECIAL_EDGEID;
}
unsigned GetDirectedOutDegree(const NodeIterator n) const
{
unsigned degree = 0;
for (const auto edge : osrm::irange(BeginEdges(n), EndEdges(n)))
{
if (GetEdgeData(edge).forward)
{
++degree;
}
}
return degree;
}
// removes all edges (source,target)
int32_t DeleteEdgesTo(const NodeIterator source, const NodeIterator target)
{
int32_t deleted = 0;
for (EdgeIterator i = BeginEdges(source), iend = EndEdges(source); i < iend - deleted; ++i)
{
if (edge_list[i].target == target)
{
do
{
deleted++;
edge_list[i] = edge_list[iend - deleted];
makeDummy(iend - deleted);
} while (i < iend - deleted && edge_list[i].target == target);
}
}
number_of_edges -= deleted;
node_list[source].edges -= deleted;
return deleted;
}
int main(int argc, char *argv[])
{
LogPolicy::GetInstance().Unmute();
try
{
// enable logging
if (argc < 3)
{
SimpleLogger().Write(logWARNING) << "usage:\n" << argv[0]
<< " <osrm> <osrm.restrictions>";
return -1;
}
SimpleLogger().Write() << "Using restrictions from file: " << argv[2];
std::ifstream restriction_ifstream(argv[2], std::ios::binary);
const FingerPrint fingerprint_orig;
FingerPrint fingerprint_loaded;
restriction_ifstream.read((char *)&fingerprint_loaded, sizeof(FingerPrint));
// check fingerprint and warn if necessary
if (!fingerprint_loaded.TestGraphUtil(fingerprint_orig))
{
SimpleLogger().Write(logWARNING) << argv[2] << " was prepared with a different build. "
"Reprocess to get rid of this warning.";
}
if (!restriction_ifstream.good())
{
throw osrm::exception("Could not access <osrm-restrictions> files");
}
uint32_t usable_restrictions = 0;
restriction_ifstream.read((char *)&usable_restrictions, sizeof(uint32_t));
restriction_list.resize(usable_restrictions);
// load restrictions
if (usable_restrictions > 0)
{
restriction_ifstream.read((char *)&(restriction_list[0]),
usable_restrictions * sizeof(TurnRestriction));
}
restriction_ifstream.close();
std::ifstream input_stream(argv[1], std::ifstream::in | std::ifstream::binary);
if (!input_stream.is_open())
{
throw osrm::exception("Cannot open osrm file");
}
// load graph data
std::vector<ImportEdge> edge_list;
const NodeID number_of_nodes = readBinaryOSRMGraphFromStream(input_stream,
edge_list,
bollard_node_list,
traffic_lights_list,
&coordinate_list,
restriction_list);
input_stream.close();
BOOST_ASSERT_MSG(restriction_list.size() == usable_restrictions,
"size of restriction_list changed");
SimpleLogger().Write() << restriction_list.size() << " restrictions, "
<< bollard_node_list.size() << " bollard nodes, "
<< traffic_lights_list.size() << " traffic lights";
traffic_lights_list.clear();
traffic_lights_list.shrink_to_fit();
// Building an node-based graph
DeallocatingVector<TarjanEdge> graph_edge_list;
for (const NodeBasedEdge &input_edge : edge_list)
{
if (input_edge.source == input_edge.target)
{
continue;
}
if (input_edge.forward)
{
graph_edge_list.emplace_back(input_edge.source,
input_edge.target,
(std::max)((int)input_edge.weight, 1),
input_edge.name_id);
}
if (input_edge.backward)
{
graph_edge_list.emplace_back(input_edge.target,
input_edge.source,
(std::max)((int)input_edge.weight, 1),
input_edge.name_id);
}
}
edge_list.clear();
edge_list.shrink_to_fit();
BOOST_ASSERT_MSG(0 == edge_list.size() && 0 == edge_list.capacity(),
"input edge vector not properly deallocated");
tbb::parallel_sort(graph_edge_list.begin(), graph_edge_list.end());
auto graph = std::make_shared<TarjanDynamicGraph>(number_of_nodes, graph_edge_list);
edge_list.clear();
edge_list.shrink_to_fit();
SimpleLogger().Write() << "Starting SCC graph traversal";
RestrictionMap restriction_map(restriction_list);
auto tarjan = osrm::make_unique<TarjanSCC<TarjanDynamicGraph>>(graph,
restriction_map,
bollard_node_list);
tarjan->run();
SimpleLogger().Write() << "identified: " << tarjan->get_number_of_components()
<< " many components";
SimpleLogger().Write() << "identified " << tarjan->get_size_one_count() << " SCCs of size 1";
// output
TIMER_START(SCC_RUN_SETUP);
// remove files from previous run if exist
DeleteFileIfExists("component.dbf");
DeleteFileIfExists("component.shx");
DeleteFileIfExists("component.shp");
Percent p(graph->GetNumberOfNodes());
OGRRegisterAll();
const char *pszDriverName = "ESRI Shapefile";
OGRSFDriver *poDriver =
OGRSFDriverRegistrar::GetRegistrar()->GetDriverByName(pszDriverName);
if (nullptr == poDriver)
{
throw osrm::exception("ESRI Shapefile driver not available");
}
OGRDataSource *poDS = poDriver->CreateDataSource("component.shp", nullptr);
if (nullptr == poDS)
{
throw osrm::exception("Creation of output file failed");
}
OGRSpatialReference *poSRS = new OGRSpatialReference();
poSRS->importFromEPSG(4326);
OGRLayer *poLayer = poDS->CreateLayer("component", poSRS, wkbLineString, nullptr);
if (nullptr == poLayer)
{
throw osrm::exception("Layer creation failed.");
}
TIMER_STOP(SCC_RUN_SETUP);
SimpleLogger().Write() << "shapefile setup took " << TIMER_MSEC(SCC_RUN_SETUP)/1000. << "s";
uint64_t total_network_distance = 0;
p.reinit(graph->GetNumberOfNodes());
TIMER_START(SCC_OUTPUT);
for (const NodeID source : osrm::irange(0u, graph->GetNumberOfNodes()))
{
p.printIncrement();
for (const auto current_edge : graph->GetAdjacentEdgeRange(source))
{
const TarjanDynamicGraph::NodeIterator target = graph->GetTarget(current_edge);
if (source < target || graph->EndEdges(target) == graph->FindEdge(target, source))
{
total_network_distance +=
100 * FixedPointCoordinate::ApproximateEuclideanDistance(
coordinate_list[source].lat,
coordinate_list[source].lon,
coordinate_list[target].lat,
coordinate_list[target].lon);
BOOST_ASSERT(current_edge != SPECIAL_EDGEID);
BOOST_ASSERT(source != SPECIAL_NODEID);
BOOST_ASSERT(target != SPECIAL_NODEID);
const unsigned size_of_containing_component =
std::min(tarjan->get_component_size(source),
tarjan->get_component_size(target));
// edges that end on bollard nodes may actually be in two distinct components
if (size_of_containing_component < 1000)
{
OGRLineString lineString;
lineString.addPoint(coordinate_list[source].lon / COORDINATE_PRECISION,
coordinate_list[source].lat / COORDINATE_PRECISION);
lineString.addPoint(coordinate_list[target].lon / COORDINATE_PRECISION,
coordinate_list[target].lat / COORDINATE_PRECISION);
OGRFeature *poFeature = OGRFeature::CreateFeature(poLayer->GetLayerDefn());
poFeature->SetGeometry(&lineString);
if (OGRERR_NONE != poLayer->CreateFeature(poFeature))
{
throw osrm::exception("Failed to create feature in shapefile.");
}
OGRFeature::DestroyFeature(poFeature);
}
}
}
}
OGRSpatialReference::DestroySpatialReference(poSRS);
OGRDataSource::DestroyDataSource(poDS);
TIMER_STOP(SCC_OUTPUT);
SimpleLogger().Write() << "generating output took: " << TIMER_MSEC(SCC_OUTPUT)/1000. << "s";
SimpleLogger().Write() << "total network distance: "
<< (uint64_t)total_network_distance / 100 / 1000. << " km";
SimpleLogger().Write() << "finished component analysis";
}
catch (const std::exception &e)
{
SimpleLogger().Write(logWARNING) << "[exception] " << e.what();
}
return 0;
}
EdgeRange GetAdjacentEdgeRange(const NodeID node) const
{
return osrm::irange(BeginEdges(node), EndEdges(node));
}
unsigned GetOutDegree(const NodeIterator n) const { return EndEdges(n) - BeginEdges(n); }
