static void __devinit f71805f_init_device(struct f71805f_data *data)
{
u8 reg;
int i;
reg = f71805f_read8(data, F71805F_REG_START);
if ((reg & 0x41) != 0x01) {
printk(KERN_DEBUG DRVNAME ": Starting monitoring "
"operations\n");
f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
}
/* Fan monitoring can be disabled. If it is, we won't be polling
the register values, and won't create the related sysfs files. */
for (i = 0; i < 3; i++) {
data->fan_ctrl[i] = f71805f_read8(data,
F71805F_REG_FAN_CTRL(i));
/* Clear latch full bit, else "speed mode" fan speed control
doesn't work */
if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
data->fan_ctrl[i]);
}
}
}
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71805f_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
int nr = attr->index;
u8 reg;
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err)
return err;
if (val < 1 || val > 3)
return -EINVAL;
if (val > 1) { /* Automatic mode, user can't set PWM value */
if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
S_IRUGO))
dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1);
}
mutex_lock(&data->update_lock);
reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr))
& ~FAN_CTRL_MODE_MASK;
switch (val) {
case 1:
reg |= FAN_CTRL_MODE_MANUAL;
break;
case 2:
reg |= FAN_CTRL_MODE_TEMPERATURE;
break;
case 3:
reg |= FAN_CTRL_MODE_SPEED;
break;
}
data->fan_ctrl[nr] = reg;
f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg);
mutex_unlock(&data->update_lock);
if (val == 1) { /* Manual mode, user can set PWM value */
if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
S_IRUGO | S_IWUSR))
dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1);
}
return count;
}
static void __devinit f71805f_init_device(struct f71805f_data *data)
{
u8 reg;
int i;
reg = f71805f_read8(data, F71805F_REG_START);
if ((reg & 0x41) != 0x01) {
printk(KERN_DEBUG DRVNAME ": Starting monitoring "
"operations\n");
f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
}
/* Fan monitoring can be disabled. If it is, we won't be polling
the register values, and won't create the related sysfs files. */
for (i = 0; i < 3; i++) {
reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
if (!(reg & 0x80))
data->fan_enabled |= (1 << i);
}
}
static struct f71805f_data *f71805f_update_device(struct device *dev)
{
struct f71805f_data *data = dev_get_drvdata(dev);
int nr, apnr;
mutex_lock(&data->update_lock);
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_updated + 60 * HZ)
|| !data->valid) {
for (nr = 0; nr < 11; nr++) {
if (!(data->has_in & (1 << nr)))
continue;
data->in_high[nr] = f71805f_read8(data,
F71805F_REG_IN_HIGH(nr));
data->in_low[nr] = f71805f_read8(data,
F71805F_REG_IN_LOW(nr));
}
for (nr = 0; nr < 3; nr++) {
data->fan_low[nr] = f71805f_read16(data,
F71805F_REG_FAN_LOW(nr));
data->fan_target[nr] = f71805f_read16(data,
F71805F_REG_FAN_TARGET(nr));
data->pwm_freq[nr] = f71805f_read8(data,
F71805F_REG_PWM_FREQ(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp_high[nr] = f71805f_read8(data,
F71805F_REG_TEMP_HIGH(nr));
data->temp_hyst[nr] = f71805f_read8(data,
F71805F_REG_TEMP_HYST(nr));
}
data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
for (nr = 0; nr < 3; nr++) {
for (apnr = 0; apnr < 3; apnr++) {
data->auto_points[nr].temp[apnr] =
f71805f_read8(data,
F71805F_REG_PWM_AUTO_POINT_TEMP(nr,
apnr));
data->auto_points[nr].fan[apnr] =
f71805f_read16(data,
F71805F_REG_PWM_AUTO_POINT_FAN(nr,
apnr));
}
}
data->last_limits = jiffies;
}
/* Measurement registers cache is refreshed after 1 second */
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
for (nr = 0; nr < 11; nr++) {
if (!(data->has_in & (1 << nr)))
continue;
data->in[nr] = f71805f_read8(data,
F71805F_REG_IN(nr));
}
for (nr = 0; nr < 3; nr++) {
data->fan[nr] = f71805f_read16(data,
F71805F_REG_FAN(nr));
data->fan_ctrl[nr] = f71805f_read8(data,
F71805F_REG_FAN_CTRL(nr));
data->pwm[nr] = f71805f_read8(data,
F71805F_REG_PWM_DUTY(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp[nr] = f71805f_read8(data,
F71805F_REG_TEMP(nr));
}
data->alarms = f71805f_read8(data, F71805F_REG_STATUS(0))
+ (f71805f_read8(data, F71805F_REG_STATUS(1)) << 8)
+ (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}