int main()
{
uint32_t i, u32Data;
/* Unlock protected registers */
SYS_UnlockReg();
SYS_Init();
UART_Init();
/*
This sample code is used to show how to use StdDriver API to implement ISP functions.
*/
printf("\n\n");
printf("+----------------------------------------+\n");
printf("| NUC029xDE FMC Sample Code |\n");
printf("+----------------------------------------+\n");
//SYS_UnlockReg();
/* Enable FMC ISP function */
FMC_Open();
if(SetDataFlashBase(DATA_FLASH_TEST_BASE) < 0)
{
printf("Failed to set Data Flash base address!\n");
goto lexit;
}
/* Read BS */
printf(" Boot Mode ............................. ");
if(FMC_GetBootSource() == 0)
printf("[APROM]\n");
else
{
printf("[LDROM]\n");
printf(" WARNING: The driver sample code must execute in AP mode!\n");
goto lexit;
}
u32Data = FMC_ReadCID();
printf(" Company ID ............................ [0x%08x]\n", u32Data);
u32Data = FMC_ReadDID();
printf(" Device ID ............................. [0x%08x]\n", u32Data);
u32Data = FMC_ReadPID();
printf(" Product ID ............................ [0x%08x]\n", u32Data);
for(i = 0; i < 3; i++)
{
u32Data = FMC_ReadUID(i);
printf(" Unique ID %d ........................... [0x%08x]\n", i, u32Data);
}
for(i = 0; i < 4; i++)
{
u32Data = FMC_ReadUCID(i);
printf(" Unique Customer ID %d .................. [0x%08x]\n", i, u32Data);
}
/* Read User Configuration */
printf(" User Config 0 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE));
printf(" User Config 1 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE + 4));
/* Read Data Flash base address */
u32Data = FMC_ReadDataFlashBaseAddr();
printf(" Data Flash Base Address ............... [0x%08x]\n", u32Data);
printf("\n\nLDROM test =>\n");
FMC_EnableLDUpdate();
if(FlashTest(FMC_LDROM_BASE, FMC_LDROM_BASE + FMC_LDROM_SIZE, TEST_PATTERN) < 0)
{
printf("\n\nLDROM test failed!\n");
goto lexit;
}
FMC_DisableLDUpdate();
printf("\n\nAPROM test =>\n");
FMC_EnableAPUpdate();
if(FlashTest(APROM_TEST_BASE, APROM_TEST_END, TEST_PATTERN) < 0)
{
printf("\n\nAPROM test failed!\n");
goto lexit;
}
FMC_DisableAPUpdate();
printf("\n\nData Flash test =>\n");
if(FlashTest(DATA_FLASH_TEST_BASE, DATA_FLASH_TEST_END, TEST_PATTERN) < 0)
{
printf("\n\nUHB test failed!\n");
goto lexit;
}
lexit:
/* Disable FMC ISP function */
FMC_Close();
/* Lock protected registers */
SYS_LockReg();
printf("\nFMC Sample Code Completed.\n");
while(1);
}
int aprom()
{
uint8_t u8Item;
uint32_t u32Data;
char *acBootMode[] = {"LDROM+IAP", "LDROM", "APROM+IAP", "APROM"};
uint32_t u32CBS;
/* Unlock protected registers */
SYS_UnlockReg();
/* Init system clock and multi-function I/O */
SYS_Init();
/* Init UART */
UART_Init();
printf("\n\n");
printf("+----------------------------------------+\n");
printf("| NUC029 FMC IAP Sample Code |\n");
printf("| [APROM code] |\n");
printf("+----------------------------------------+\n");
/* Enable FMC ISP function */
FMC_Open();
if(SetIAPBoot() < 0)
{
printf("Failed to set IAP boot mode!\n");
goto lexit;
}
/* Get boot mode */
printf(" Boot Mode ............................. ");
u32CBS = (FMC->ISPSTA & FMC_ISPSTA_CBS_Msk) >> FMC_ISPSTA_CBS_Pos;
printf("[%s]\n", acBootMode[u32CBS]);
u32Data = FMC_ReadCID();
printf(" Company ID ............................ [0x%08x]\n", u32Data);
u32Data = FMC_ReadDID();
printf(" Device ID ............................. [0x%08x]\n", u32Data);
u32Data = FMC_ReadPID();
printf(" Product ID ............................ [0x%08x]\n", u32Data);
/* Read User Configuration */
printf(" User Config 0 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE));
printf(" User Config 1 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE + 4));
do
{
printf("\n\n\n");
printf("+----------------------------------------+\n");
printf("| Select |\n");
printf("+----------------------------------------+\n");
printf("| [0] Load IAP code to LDROM |\n");
printf("| [1] Run IAP program (in LDROM) |\n");
printf("+----------------------------------------+\n");
printf("Please select...");
u8Item = UART_GetChar();
printf("%c\n", u8Item);
switch(u8Item)
{
case '0':
FMC_EnableLDUpdate();
if(LoadImage((uint32_t)&loaderImage1Base, (uint32_t)&loaderImage1Limit,
FMC_LDROM_BASE, FMC_LDROM_SIZE) != 0)
{
printf("Load image to LDROM failed!\n");
goto lexit;
}
FMC_DisableLDUpdate();
break;
case '1':
printf("\n\nChange VECMAP and branch to LDROM...\n");
UART_WAIT_TX_EMPTY(UART0); /* To make sure all message has been print out */
/* Mask all interrupt before changing VECMAP to avoid wrong interrupt handler fetched */
__set_PRIMASK(1);
/* Set VECMAP to LDROM for booting from LDROM */
FMC_SetVectorPageAddr(FMC_LDROM_BASE);
/* Software reset to boot to LDROM */
NVIC_SystemReset();
break;
default :
break;
}
}
while(1);
lexit:
/* Disable FMC ISP function */
FMC_Close();
/* Lock protected registers */
SYS_LockReg();
printf("\nFMC Sample Code Completed.\n");
while(1);
}
int FMC_RW()
{
uint32_t i, u32Data;
/* Init System, IP clock and multi-function I/O */
SysInit();
/* Init UART0 for printf */
UART0_Init();
/*---------------------------------------------------------------------------------------------------------*/
/* SAMPLE CODE */
/*---------------------------------------------------------------------------------------------------------*/
printf("\n\nCPU @ %dHz\n", SystemCoreClock);
SYS_UnlockReg();
/* Enable FMC ISP function */
FMC_Open();
if (set_data_flash_base(DATA_FLASH_TEST_BASE) < 0) {
printf("Failed to set Data Flash base address!\n");
goto lexit;
}
/* Read BS */
printf(" Boot Mode ............................. ");
if (FMC_GetBootSource() == 0)
printf("[APROM]\n");
else {
printf("[LDROM]\n");
printf(" WARNING: The driver sample code must execute in AP mode!\n");
goto lexit;
}
u32Data = FMC_ReadCID();
printf(" Company ID ............................ [0x%08x]\n", u32Data);
u32Data = FMC_ReadDID();
printf(" Device ID ............................. [0x%08x]\n", u32Data);
u32Data = FMC_ReadPID();
printf(" Product ID ............................ [0x%08x]\n", u32Data);
for (i = 0; i < 3; i++) {
u32Data = FMC_ReadUID(i);
printf(" Unique ID %d ........................... [0x%08x]\n", i, u32Data);
}
for (i = 0; i < 4; i++) {
u32Data = FMC_ReadUCID(i);
printf(" Unique Customer ID %d .................. [0x%08x]\n", i, u32Data);
}
/* Read User Configuration */
printf(" User Config 0 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE));
printf(" User Config 1 ......................... [0x%08x]\n", FMC_Read(FMC_CONFIG_BASE+4));
/* Read Data Flash base address */
u32Data = FMC_ReadDataFlashBaseAddr();
printf(" Data Flash Base Address ............... [0x%08x]\n", u32Data);
printf("\n\nLDROM test =>\n");
FMC_EnableLDUpdate();
if (flash_test(FMC_LDROM_BASE, FMC_LDROM_END, TEST_PATTERN) < 0) {
printf("\n\nLDROM test failed!\n");
goto lexit;
}
FMC_DisableLDUpdate();
printf("\n\nAPROM test =>\n");
FMC_EnableAPUpdate();
if (flash_test(APROM_TEST_BASE, DATA_FLASH_TEST_BASE, TEST_PATTERN) < 0) {
printf("\n\nAPROM test failed!\n");
goto lexit;
}
FMC_DisableAPUpdate();
printf("\n\nData Flash test =>\n");
if (flash_test(DATA_FLASH_TEST_BASE, DATA_FLASH_TEST_END, TEST_PATTERN) < 0) {
printf("\n\nUHB test failed!\n");
goto lexit;
}
lexit:
/* Disable FMC ISP function */
FMC_Close();
/* Lock protected registers */
SYS_LockReg();
printf("\nFMC Sample Code Completed.\n");
while (1);
}