VOID SetBadBlock(OAL_BLMENU_ITEM *pMenu)
{
HANDLE hFMD = NULL;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
BLOCK_ID blockId;
WCHAR szInputLine[16];
UNREFERENCED_PARAMETER(pMenu);
// Open FMD
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALLog(L" Oops, can't open FMD driver\r\n");
goto cleanUp;
}
if (!FMD_GetInfo(&flashInfo))
{
OALLog(L" Oops, can't get flash geometry info\r\n");
goto cleanUp;
}
OALLog(L"\r\n Block Number: ");
if (OALBLMenuReadLine(szInputLine, dimof(szInputLine)) == 0)
{
goto cleanUp;
}
// Get sector number
blockId = OALStringToUINT32(szInputLine);
// Check sector number
if (blockId >= flashInfo.dwNumBlocks)
{
OALLog(L" Oops, too big block number\r\n");
goto cleanUp;
}
FMD_SetBlockStatus(blockId, BLOCK_STATUS_BAD);
OALLog(L"\r\n Done\r\n");
cleanUp:
if (hFMD != NULL)
{
FMD_Deinit(hFMD);
}
return;
}
BOOL BLConfigureFlashPartitions(BOOL bForceEnable)
{
BOOL rc = FALSE;
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
HANDLE hPartition;
PPARTENTRY pPartitionEntry;
DWORD dwBootPartitionSectorCount;
#ifdef IMGMULTIXIP
// Variable for sector count for the new BinFS region (EXT)
DWORD dwExtPartitionSectorCount;
#endif
memset(®Info, 0, sizeof(PCI_REG_INFO));
regInfo.MemBase.Num = 1;
regInfo.MemLen.Num = 1;
regInfo.MemBase.Reg[0] = g_ulFlashBase;
// Get flash info
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
goto cleanUp;
if (!FMD_GetInfo(&flashInfo))
goto cleanUp;
FMD_Deinit(hFMD);
// Initialize boot partition library
if (!BP_Init((LPBYTE)g_ulBPartBase, g_ulBPartLengthBytes, NULL, ®Info, NULL))
{
OALLog(L"BLConfigureFlashPartitions: Error initializing bootpart library!!\r\n");
goto cleanUp;
}
// Get boot partition size
// Ensure boot partition uses entire blocks with no space left over
// Round up to an even block size
dwBootPartitionSectorCount = ((g_bootCfg.osPartitionSize + (flashInfo.dwBytesPerBlock - 1))/ flashInfo.dwBytesPerBlock) * flashInfo.wSectorsPerBlock;
// Reduce by one to account for MBR, which will be the first sector in non reserved area.
// This causes boot partition to end on a block boundary
dwBootPartitionSectorCount -= 1;
#ifdef IMGMULTIXIP
// Calculation of the size for the EXT region
dwExtPartitionSectorCount = ((IMAGE_WINCE_EXT_SIZE + (flashInfo.dwBytesPerBlock - 1))/ flashInfo.dwBytesPerBlock) * flashInfo.wSectorsPerBlock;
dwExtPartitionSectorCount -= 1;
#endif
// Check for existence and size of OS boot partition
hPartition = BP_OpenPartition((DWORD)NEXT_FREE_LOC, (DWORD)USE_REMAINING_SPACE, PART_BOOTSECTION, FALSE, PART_OPEN_EXISTING);
if (hPartition == INVALID_HANDLE_VALUE)
OALLog(L"OS partition does not exist!!\r\n");
else
{
pPartitionEntry = BP_GetPartitionInfo(hPartition);
if (dwBootPartitionSectorCount != pPartitionEntry->Part_TotalSectors)
{
OALLog(L"OS partition does not match configured size!! Sector count expected: 0x%x, actual 0x%x\r\n", dwBootPartitionSectorCount, pPartitionEntry->Part_TotalSectors);
// Mark handle invalid to kick us into formatting code
hPartition = INVALID_HANDLE_VALUE;
}
}
if ((hPartition == INVALID_HANDLE_VALUE) || (bForceEnable == TRUE))
{
// OS binary partition either does not exist or does not match configured size
OALLog(L"Formatting flash...\r\n");
// Create a new partion
// Can't just call BP_OpenPartition with PART_OPEN_ALWAYS because it will erase reserved
// blocks (bootloader) if MBR doesn't exist. Also, we want to ensure the boot partition
// is actually the first partition on the flash. So do low level format here (note that
// this destroys all other partitions on the device)
// Note, we're skipping the block check for speed reasons. Might not want this in a production device...
BP_LowLevelFormat (0, flashInfo.dwNumBlocks, FORMAT_SKIP_RESERVED|FORMAT_SKIP_BLOCK_CHECK);
// Create the OS partition
hPartition = BP_OpenPartition((DWORD)NEXT_FREE_LOC, dwBootPartitionSectorCount, PART_BOOTSECTION, FALSE, PART_CREATE_NEW);
if (hPartition == INVALID_HANDLE_VALUE)
{
OALLog(L"Error creating OS partition!!\r\n");
goto cleanUp;
}
OALLog(L"NK partition created\r\n");
#ifdef IMGMULTIXIP
// Creation of the BinFS partition
hPartition = BP_OpenPartition((DWORD)NEXT_FREE_LOC, dwExtPartitionSectorCount, PART_BINFS, FALSE, PART_CREATE_NEW);
if (hPartition == INVALID_HANDLE_VALUE)
{
OALLog(L"Error creating OS partition!!\r\n");
goto cleanUp;
}
OALLog(L"EXT partition created\r\n");
#endif
// Create FAT partition on remaining flash (can be automatically mounted)
hPartition = BP_OpenPartition((DWORD)NEXT_FREE_LOC, (DWORD)USE_REMAINING_SPACE, PART_DOS32, FALSE, PART_CREATE_NEW);
if (hPartition == INVALID_HANDLE_VALUE)
{
OALLog(L"Error creating file partition!!\r\n");
goto cleanUp;
}
OALLog(L"Flash format complete!\r\n");
}
// Done
rc = TRUE;
cleanUp:
return rc;
}
//------------------------------------------------------------------------------
//
// Function: DFT_IOControl
//
// This function sends a command to a device.
//
BOOL DFT_IOControl(
DWORD context, DWORD dwCode,
BYTE *pInBuffer, DWORD inSize,
BYTE *pOutBuffer, DWORD outSize, DWORD *pOutSize)
{
NANDTEST_CONTEXT *pContext = (NANDTEST_CONTEXT *)context;
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
DWORD sector,block;
BOOL rc=FALSE;
UCHAR p_goodata[SECTOR_SIZE*2];
UNREFERENCED_PARAMETER(pOutSize);
DEBUGMSG(ZONE_FUNCTION,
(L"+DFT_IOControl(0x%08x, 0x%08x, 0x%08x, %d, 0x%08x, %d, 0x%08x)\r\n",
context, dwCode, pInBuffer, inSize, pOutBuffer, outSize, pOutSize));
regInfo.MemBase.Reg[0] = OMAP_GPMC_REGS_PA;
regInfo.MemLen.Reg[0] = 0x00001000;
regInfo.MemBase.Reg[1] = BSP_NAND_REGS_PA;
regInfo.MemLen.Reg[1] = 0x00001000;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
DEBUGMSG(ZONE_ERROR, (L"ERROR: FMD_Init call failed!\r\n"));
goto cleanUp;
}
switch (dwCode)
{
case NAND_SET_SECTOR:
// Checking parameter
if (pInBuffer == NULL || inSize < sizeof(DWORD))
{
DEBUGMSG(ZONE_ERROR, (L"+DFT_IOControl(%d): ERROR - invalid parameters\r\n", dwCode));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo))
{
DEBUGMSG(ZONE_ERROR, (L"ERROR: FMD_GetInfo call failed!\r\n"));
goto cleanUp;
}
pContext->test_sector = *(DWORD*)pInBuffer;
block = pContext->test_sector / flashInfo.wSectorsPerBlock;
sector = pContext->test_sector % flashInfo.wSectorsPerBlock;
DEBUGMSG(ZONE_ERROR, (L"Test section info: block=%d sector=%d !\r\n", block, sector));
if(block >= flashInfo.dwNumBlocks)
{
DEBUGMSG(ZONE_ERROR, (L"ERROR: invalid sector!\r\n"));
goto cleanUp;
}
if(FMD_GetBlockStatus(block) &
(BLOCK_STATUS_BAD |BLOCK_STATUS_RESERVED |BLOCK_STATUS_READONLY))
{
DEBUGMSG(ZONE_ERROR, (L"ERROR: invalid sector status:%x!\r\n", FMD_GetBlockStatus(block) ));
goto cleanUp;
}
rc = TRUE;
break;
case NAND_ECC_CORRECTION:
/* Expecting 2 * 2K data, first 2K is good data,
second 2K is bad data needs correction */
// Checking parameter
if (pInBuffer == NULL || inSize != SECTOR_SIZE *2)
{
DEBUGMSG(ZONE_ERROR, (L"+DFT_IOControl(%d): ERROR - invalid in parameters\r\n", dwCode));
goto cleanUp;
}
memcpy(p_goodata, pInBuffer, SECTOR_SIZE * 2);
if (pOutBuffer == NULL || outSize != SECTOR_SIZE)
{
DEBUGMSG(ZONE_ERROR, (L"+DFT_IOControl(%d): ERROR - invalid out parameters\r\n", dwCode));
goto cleanUp;
}
/* Call ECC test routine */
rc = nand_ecc_test(context, p_goodata, pOutBuffer);
break;
default:
break;
}
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
return rc;
}
BOOL WriteFlashNK(UINT32 address, UINT32 size)
{
BOOL rc = FALSE;
HANDLE hFMD;
FlashInfo flashInfo;
SectorInfo sectorInfo;
BOOL ok = FALSE;
BLOCK_ID block;
//ROMHDR *pTOC;
UINT32 *pInfo, count, sector;
UINT32 blockSize, sectorSize, sectorsPerBlock;
UINT8 *pData;
OALMSG(OAL_INFO, (L"OEMWriteFlash: Writing NK image to flash\r\n"));
// We need to know sector/block size
if ((hFMD = FMD_Init(NULL, NULL, NULL)) == NULL) {
OALMSG(OAL_ERROR, (L"ERROR: OEMWriteFlash: "
L"FMD_Init call failed\r\n"
));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo)) {
OALMSG(OAL_ERROR, (L"ERROR: EBOOT!OEMWriteFlash: "
L"FMD_GetInfo call failed!\r\n"
));
FMD_Deinit(hFMD);
goto cleanUp;
}
// We don't need access to FMD library
FMD_Deinit(hFMD);
OALMSG(OAL_INFO, (L"OEMWriteFlash: "
L"Flash has %d blocks, %d bytes/block, %d sectors/block\r\n",
flashInfo.dwNumBlocks, flashInfo.dwBytesPerBlock,
flashInfo.wSectorsPerBlock
));
// Make block & sector size ready
blockSize = flashInfo.dwBytesPerBlock;
sectorSize = flashInfo.wDataBytesPerSector;
sectorsPerBlock = flashInfo.wSectorsPerBlock;
// Get data location
pData = OEMMapMemAddr(address, address);
// Verify that we get CE image.
pInfo = (UINT32*)(pData + ROM_SIGNATURE_OFFSET);
if (*pInfo++ != ROM_SIGNATURE) {
OALMSG(OAL_ERROR, (L"ERROR: OEMWriteFlash: "
L"Image Signature not found\r\n"
));
goto cleanUp;
}
pInfo++;
// Skip reserved blocks
block = 0;
while (block < flashInfo.dwNumBlocks) {
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) != 0) {
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Skip bad block %d\r\n", block
));
block++;
continue;
}
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_RESERVED) == 0) break;
block++;
}
OALMSG(OAL_INFO, (L"OEMWriteFlash: "
L"NK image starts at block %d\r\n", block
));
// Write image
count = 0;
while (count < size && block < flashInfo.dwNumBlocks) {
// If block is bad, we have to offset it
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) != 0) {
block++;
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Skip bad block %d\r\n", block
));
continue;
}
// Erase block
if (!EraseBlock(block)) {
FMD_SetBlockStatus(block, BLOCK_STATUS_BAD);
block++;
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Block %d erase failed, mark block as bad\r\n", block
));
continue;
}
// Now write sectors
sector = 0;
while (sector < sectorsPerBlock && count < size) {
// Prepare sector info
memset(§orInfo, 0xFF, sizeof(sectorInfo));
sectorInfo.dwReserved1 = 0;
sectorInfo.wReserved2 = 0;
// Write sector
if (!(ok = WriteSector(
block * sectorsPerBlock + sector, pData + count, §orInfo
))) break;
// Move to next sector
count += sectorSize;
sector++;
}
// When sector write failed, mark block as bad and move back
if (!ok) {
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Block %d sector %d write failed, mark block as bad\r\n",
block, sector
));
// First move back
count -= sector * flashInfo.wDataBytesPerSector;
// Mark block as bad
FMD_SetBlockStatus(block, BLOCK_STATUS_BAD);
}
// We are done with block
block++;
}
// Erase rest of media
while (block < flashInfo.dwNumBlocks) {
// If block is bad, we have to offset it
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) != 0) {
block++;
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Skip bad block %d\r\n", block
));
continue;
}
// When erase failed, mark block as bad and skip it
if (!EraseBlock(block)) {
FMD_SetBlockStatus(block, BLOCK_STATUS_BAD);
block++;
OALMSG(OAL_WARN, (L"WARN: EBOOT!OEMWriteFlash: "
L"Block %d erase failed, mark block as bad\r\n", block
));
continue;
}
// Move to next block
block++;
}
// Close FMD driver
FMD_Deinit(hFMD);
hFMD = NULL;
OALMSG(OAL_INFO, (L"OEMWriteFlash: NK written\r\n"));
// Done
rc = TRUE;
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
return rc;
}
static UINT32 ReadFlashNK()
{
UINT32 rc = BL_ERROR;
HANDLE hFMD = NULL;
FlashInfo flashInfo;
ROMHDR *pTOC;
UINT32 offset, size, toc;
UINT32 blockSize, sectorSize, sectorsPerBlock;
SectorInfo sectorInfo;
SECTOR_ADDR sector;
BLOCK_ID block;
UINT8 *pImage;
// Check if there is a valid image
OALMSG(OAL_INFO, (L"\r\nLoad NK image from flash memory\r\n"));
// Open FMD to access NAND
hFMD = FMD_Init(NULL, NULL, NULL);
if (hFMD == NULL) {
OALMSG(OAL_ERROR, (L"ERROR: BLFlashDownload: "
L"FMD_Init call failed\r\n"
));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo)) {
OALMSG(OAL_ERROR, (L"ERROR: BLFlashDownload: "
L"FMD_GetInfo call failed\r\n"
));
goto cleanUp;
}
// Make block & sector size ready
blockSize = flashInfo.dwBytesPerBlock;
sectorSize = flashInfo.wDataBytesPerSector;
sectorsPerBlock = flashInfo.wSectorsPerBlock;
// Skip reserved blocks
block = 0;
while (block < flashInfo.dwNumBlocks) {
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) != 0) {
OALMSG(OAL_WARN, (L"WARN: EBOOT!FMD_GetBlockStatus: "
L"Skip bad block %d\r\n", block
));
block++;
continue;
}
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_RESERVED) == 0) break;
block++;
}
// Set address where to place image
pImage = (UINT8*)IMAGE_WINCE_CODE_PA;
size = IMAGE_WINCE_CODE_SIZE;
// Read image to memory
offset = 0;
toc = 0;
pTOC = NULL;
while (offset < size && block < flashInfo.dwNumBlocks) {
// Skip bad blocks
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) != 0) {
block++;
sector += flashInfo.wSectorsPerBlock;
continue;
}
// Read sectors in block
sector = 0;
while (sector < sectorsPerBlock && offset < size) {
// When block read fail, there isn't what we can do more
RETAILMSG(1, (TEXT("0x%x 0x%x \r\n"), block * sectorsPerBlock + sector, pImage + offset));
if (!FMD_ReadSector(
block * sectorsPerBlock + sector, pImage + offset,
§orInfo, 1
)) {
OALMSG(OAL_ERROR, (L"\r\nERROR: BLFlashDownload: "
L"Failed read sector %d from flash\r\n", sector
));
goto cleanUp;
}
// Move to next sector
sector++;
offset += sectorSize;
}
// Move to next block
block++;
}
g_pTOC->id[g_dwTocEntry].dwJumpAddress = IMAGE_WINCE_CODE_PA;
rc = BL_JUMP;
cleanUp:
return rc;
}
static UINT32 ReadFlashIPL()
{
UINT32 rc = BL_ERROR;
HANDLE hFMD = NULL;
FlashInfo flashInfo;
UINT32 offset;
SectorInfo sectorInfo;
SECTOR_ADDR sector;
BLOCK_ID block;
UINT8 *pImage;
UINT32 *pInfo;
// Check if there is a valid image
OALMSG(OAL_INFO, (L"\r\nLoad IPL Image from flash memory\r\n"));
// Open FMD to access NAND
hFMD = FMD_Init(NULL, NULL, NULL);
if (hFMD == NULL) {
OALMSG(OAL_ERROR, (L"ERROR: BLFlashDownload: "
L"FMD_Init call failed\r\n"
));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo)) {
OALMSG(OAL_ERROR, (L"ERROR: BLFlashDownload: "
L"FMD_GetInfo call failed\r\n"
));
goto cleanUp;
}
// Start from NAND start
block = 0;
sector = 8;
offset = 0;
// Set address where to place image
pImage = (UINT8*)(IMAGE_IPL_ADDR_VA);
// Read image to memory
while (offset < IMAGE_IPL_SIZE && block < flashInfo.dwNumBlocks) {
// Read sectors in block
while ( offset < IMAGE_IPL_SIZE ) {
// When block read fail, there isn't what we can do more
if (!FMD_ReadSector(sector, pImage, §orInfo, 1)) {
OALMSG(OAL_ERROR, (L"\r\nERROR: BLFlashDownload: "
L"Failed read sector %d from flash\r\n", sector
));
goto cleanUp;
}
// Move to next sector
sector++;
pImage += flashInfo.wDataBytesPerSector;
offset += flashInfo.wDataBytesPerSector;
// OALMSG(OAL_INFO, (L"."));
}
// Move to next block
block++;
}
OALMSG(OAL_INFO, (L"\r\n"));
// Check if IPL is image and dump its content
pInfo = (UINT32*)(IMAGE_IPL_ADDR_VA + ROM_SIGNATURE_OFFSET);
if (*pInfo != ROM_SIGNATURE) {
OALMSG(OAL_ERROR, (L"ERROR: BLFlashDownload: "
L"IPL image doesn't have ROM signature at 0x%08x\r\n", pInfo
));
goto cleanUp;
}
g_pTOC->id[g_dwTocEntry].dwJumpAddress = IMAGE_IPL_ADDR_VA;
rc = BL_JUMP;
cleanUp:
return rc;
}
BOOL
BLReserveBootBlocks(
BOOT_CFG *pBootCfg
)
{
#ifndef BSP_NO_NAND_IN_SDBOOT
BOOL rc = FALSE;
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
UINT32 size;
BLOCK_ID firstblock, lastblock;
UINT32 status;
UNREFERENCED_PARAMETER(pBootCfg);
// Automatically mark the bootloader blocks as read-only/reserved
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_Init call failed!\r\n"));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo))
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_GetInfo call failed!\r\n"));
goto cleanUp;
}
// Loop thru the bootloader blocks to ensure they are marked reserved
firstblock = 0;
size = IMAGE_BOOTLOADER_NAND_SIZE;
lastblock = ((size -1) / flashInfo.dwBytesPerBlock) + 1;
OALLog(L"Checking bootloader blocks are marked as reserved (Num = %d)\r\n", lastblock-firstblock);
while (firstblock < lastblock)
{
// If block is bad, we have to offset it
status = FMD_GetBlockStatus(firstblock);
// Skip bad blocks
if ((status & BLOCK_STATUS_BAD) != 0)
{
OALLog(L" Skip bad block %d\r\n", firstblock);
// blocks marked bad would not have been written either, so don't include this
// in the count of blocks that are reserved.
firstblock++;
lastblock++;
continue;
}
// Skip already reserved blocks
if ((status & BLOCK_STATUS_RESERVED) != 0)
{
firstblock++;
continue;
}
// Mark block as read-only & reserved
if (!FMD_SetBlockStatus(firstblock, BLOCK_STATUS_READONLY|BLOCK_STATUS_RESERVED))
{
OALLog(L" Oops, can't mark block %d - as reserved\r\n", firstblock);
}
firstblock++;
OALLog(L".");
}
// Done
rc = TRUE;
OALLog(L"\r\n");
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
return rc;
#else
UNREFERENCED_PARAMETER(pBootCfg);
// Nothing to do...
return TRUE;
#endif
}
BOOL
BLReadBootCfg(
BOOT_CFG *pBootCfg
)
{
BOOL rc = FALSE;
#ifndef BSP_NO_NAND_IN_SDBOOT
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
SectorInfo sectorInfo;
SECTOR_ADDR sector;
BLOCK_ID block;
UINT32 count, offset;
UINT8 buffer[2048];
// EBOOT configuration is placed in last sector of EBOOT image
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_Init call failed!\r\n"));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo))
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_GetInfo call failed!\r\n"));
goto cleanUp;
}
// We can support only flash with sector size < 2048 bytes
if (flashInfo.wDataBytesPerSector > sizeof(buffer))
{
OALMSG(OAL_ERROR, (L"ERROR: "
L"Flash sector size %d bytes bigger than supported %d bytes\r\n",
flashInfo.wDataBytesPerSector, sizeof(buffer)
));
goto cleanUp;
}
// Configuration is located in last sector of EBOOT image
offset = IMAGE_XLDR_BOOTSEC_NAND_SIZE + IMAGE_EBOOT_BOOTSEC_NAND_SIZE;
// Start from beginning
block = 0;
sector = 0;
// Skip X-Loader & EBOOT code & bad blocks
// Note that we also check the last eboot block in order to ensure it is good
count = 0;
while ((count < offset) && (block < flashInfo.dwNumBlocks))
{
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) == 0)
{
count += flashInfo.dwBytesPerBlock;
}
block++;
}
// We've incremented past the last eboot block in order to check it too
// Back up now, the previous block is the last one containing eboot and is good
block--;
// Compute sector within the block where config lies
sector = block * flashInfo.wSectorsPerBlock;
sector += flashInfo.wSectorsPerBlock - 1;
// Read sector to buffer
if (!FMD_ReadSector(sector, buffer, §orInfo, 1)) {
OALMSG(OAL_ERROR, (L"ERROR: EBOOT!BLReadBootCfg: "
L"Flash sector %d read failed\r\n", sector
));
goto cleanUp;
}
// Copy data to BOOT_CFG structure
memcpy(pBootCfg, buffer, sizeof(BOOT_CFG));
// Done
rc = TRUE;
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
#else
UNREFERENCED_PARAMETER(pBootCfg);
#endif
return rc;
}
BOOL
BLWriteBootCfg(
BOOT_CFG *pBootCfg
)
{
BOOL rc = FALSE;
#ifndef BSP_NO_NAND_IN_SDBOOT
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
SectorInfo sectorInfo;
SECTOR_ADDR sector;
BLOCK_ID block;
UINT32 count, offset, length;
UINT8 buffer[2048];
UINT8 *pEBOOT;
// EBOOT configuration is placed in last sector of image
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_Init call failed!\r\n"));
goto cleanUp;
}
// Get flash info
if (!FMD_GetInfo(&flashInfo))
{
OALMSG(OAL_ERROR, (L"ERROR: FMD_GetInfo call failed!\r\n"));
goto cleanUp;
}
// We can support only flash with sector size which fit to our buffer
if (flashInfo.wDataBytesPerSector > sizeof(buffer))
{
OALMSG(OAL_ERROR, (L"ERROR: "
L"Flash sector size %d bytes bigger that supported %d bytes\r\n",
flashInfo.wDataBytesPerSector, sizeof(buffer)
));
goto cleanUp;
}
// Configuration is located in last sector of last EBOOT block
offset = IMAGE_XLDR_BOOTSEC_NAND_SIZE + IMAGE_EBOOT_BOOTSEC_NAND_SIZE;
// Skip X-Loader & EBOOT code & bad blocks
// Note that we also check the last eboot block in order to ensure it is good
block = 0;
count = 0;
while ((count < offset) && (block < flashInfo.dwNumBlocks))
{
if ((FMD_GetBlockStatus(block) & BLOCK_STATUS_BAD) == 0)
{
count += flashInfo.dwBytesPerBlock;
}
block++;
}
// We've incremented past the last eboot block in order to check it too
// Back up now, the previous block is the last one containing eboot and is good
block--;
// Need to copy off the block contents to RAM (minus the config sector)
pEBOOT = (UINT8*)IMAGE_WINCE_CODE_CA;
length = flashInfo.dwBytesPerBlock - flashInfo.wDataBytesPerSector;
memset((VOID*)pEBOOT, 0xFF, flashInfo.dwBytesPerBlock);
sector = block * flashInfo.wSectorsPerBlock;
offset = 0;
while (offset < length)
{
// When block read fail, there isn't what we can do more
if (!FMD_ReadSector(sector, pEBOOT + offset, §orInfo, 1)) {
OALMSG(OAL_ERROR, (L"\r\nERROR: EBOOT!BLWriteBootCfg: "
L"Failed read sector %d from flash\r\n", sector
));
goto cleanUp;
}
// Move to next sector
sector++;
offset += flashInfo.wDataBytesPerSector;
}
// Copy the config info into last sector of saved block in RAM
memcpy(pEBOOT + offset, pBootCfg, sizeof(BOOT_CFG));
// Erase block
if (!FMD_EraseBlock(block))
{
OALMSG(OAL_ERROR, (L"ERROR: EBOOT!BLWriteBootCfg: "
L"Flash block %d erase failed\r\n", block
));
goto cleanUp;
}
// Write contents of the save block + config sector back to flash
pEBOOT = (UINT8*)IMAGE_WINCE_CODE_CA;
length = flashInfo.dwBytesPerBlock;
sector = block * flashInfo.wSectorsPerBlock;
offset = 0;
while (offset < length)
{
// Prepare sector info
memset(§orInfo, 0xFF, sizeof(sectorInfo));
sectorInfo.bOEMReserved &= ~(OEM_BLOCK_READONLY|OEM_BLOCK_RESERVED);
sectorInfo.dwReserved1 = 0;
sectorInfo.wReserved2 = 0;
// Write sector
if (!FMD_WriteSector(sector, pEBOOT + offset, §orInfo, 1))
{
OALMSG(OAL_ERROR, (L"ERROR: EBOOT!BLWriteBootCfg: "
L"Flash sector %d write failed\r\n", sector
));
goto cleanUp;
}
// Move to next sector
sector++;
offset += flashInfo.wDataBytesPerSector;
}
// Done
rc = TRUE;
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
#else
UNREFERENCED_PARAMETER(pBootCfg);
#endif
return rc;
}
VOID DumpFlash(OAL_BLMENU_ITEM *pMenu)
{
HANDLE hFMD = NULL;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
SectorInfo sectorInfo;
SECTOR_ADDR sector;
WCHAR szInputLine[16];
UINT8 buffer[2048], pOob[64];
UINT32 i, j;
UNREFERENCED_PARAMETER(pMenu);
// Open FMD
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALLog(L" Oops, can't open FMD driver\r\n");
goto cleanUp;
}
if (!FMD_GetInfo(&flashInfo))
{
OALLog(L" Oops, can't get flash geometry info\r\n");
goto cleanUp;
}
if (flashInfo.wDataBytesPerSector > sizeof(buffer))
{
OALLog(L" Oops, sector size larger than my buffer\r\n");
goto cleanUp;
}
for(;;)
{
OALLog(L"\r\n Sector Number: ");
if (OALBLMenuReadLine(szInputLine, dimof(szInputLine)) == 0)
{
break;
}
// Get sector number
sector = OALStringToUINT32(szInputLine);
// Check sector number
if (sector > flashInfo.dwNumBlocks * flashInfo.wSectorsPerBlock)
{
OALLog(L" Oops, too big sector number\r\n");
continue;
}
if (!FMD_ReadSector(sector, buffer, §orInfo, 1))
{
OALLog(L" Oops, sector read failed\r\n");
continue;
}
OALLog(
L"\r\nSector %d (sector %d in block %d)\r\n", sector,
sector%flashInfo.wSectorsPerBlock, sector/flashInfo.wSectorsPerBlock
);
OALLog(
L"Reserved1: %08x OEMReserved: %02x Bad: %02x Reserved2: %04x\r\n",
sectorInfo.dwReserved1, sectorInfo.bOEMReserved,
sectorInfo.bBadBlock, sectorInfo.wReserved2
);
for (i = 0; i < flashInfo.wDataBytesPerSector; i += 16)
{
OALLog(L"%04x ", i);
for (j = i; j < i + 16 && j < flashInfo.wDataBytesPerSector; j++)
{
OALLog(L" %02x", buffer[j]);
}
OALLog(L" ");
for (j = i; j < i + 16 && j < flashInfo.wDataBytesPerSector; j++)
{
if (buffer[j] >= ' ' && buffer[j] < 127)
{
OALLog(L"%c", buffer[j]);
}
else
{
OALLog(L".");
}
}
OALLog(L"\r\n");
}
//dump OOB data
if (!FMD_ReadSectorOOB(sector, pOob))
{
OALLog(L" Oops, sector read failed\r\n");
continue;
}
for (i = 0; i < 64; i += 16)
{
OALLog(L"%04x ", i);
for (j = i; j < i + 16 && j < 64; j++)
{
OALLog(L" %02x", pOob[j]);
}
OALLog(L"\r\n");
}
}
cleanUp:
if (hFMD != NULL)
{
FMD_Deinit(hFMD);
}
return;
}
VOID ReserveBlock(OAL_BLMENU_ITEM *pMenu)
{
WCHAR key;
HANDLE hFMD = NULL;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
BLOCK_ID firstblock, lastblock=0;
WCHAR szInputLine[16];
UINT32 status;
UNREFERENCED_PARAMETER(pMenu);
OALLog(L"\r\n First Block Number: ");
if (OALBLMenuReadLine(szInputLine, dimof(szInputLine)) == 0)
{
goto cleanUp;
}
// Get block number
firstblock = OALStringToUINT32(szInputLine);
OALLog(L"\r\n Last Block Number: ");
if (OALBLMenuReadLine(szInputLine, dimof(szInputLine)) != 0)
{
// Get block number
lastblock = OALStringToUINT32(szInputLine);
}
if (lastblock < firstblock)
{
lastblock=firstblock;
}
// Open FMD
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALLog(L" Oops, can't open FMD driver\r\n");
goto cleanUp;
}
if (!FMD_GetInfo(&flashInfo))
{
OALLog(L" Oops, can't get flash geometry info\r\n");
goto cleanUp;
}
if (lastblock >= flashInfo.dwNumBlocks)
{
OALLog(L" Oops, too big block number\r\n");
goto cleanUp;
}
OALLog(L" Do you want mark as reserved block %d-%d [-/y]? ", firstblock, lastblock);
// Get key
key = OALBLMenuReadKey(TRUE);
OALLog(L"%c\r\n", key);
// Depending on result
if (key != L'y' && key != L'Y')
{
goto cleanUp;
}
while (firstblock<=lastblock)
{
// If block is bad, we have to offset it
status = FMD_GetBlockStatus(firstblock);
// Skip bad blocks
if ((status & BLOCK_STATUS_BAD) != 0)
{
OALLog(L" Skip bad block %d\r\n", firstblock);
// NOTE - this will cause a smaller number of blocks to actually be reserved...
firstblock++;
continue;
}
// Skip already reserved blocks
if ((status & BLOCK_STATUS_RESERVED) != 0)
{
OALLog(L" Skip reserved block %d\r\n", firstblock);
firstblock++;
continue;
}
// Mark block as read-only & reserved
if (!FMD_SetBlockStatus(firstblock, BLOCK_STATUS_READONLY|BLOCK_STATUS_RESERVED))
{
OALLog(L" Oops, can't mark block %d - as reserved\r\n", firstblock);
}
firstblock++;
OALLog(L".");
}
OALLog(L" Done\r\n");
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
return;
}
VOID EraseFlash(OAL_BLMENU_ITEM *pMenu)
{
WCHAR key;
HANDLE hFMD = NULL;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
BLOCK_ID block;
UINT32 status;
UNREFERENCED_PARAMETER(pMenu);
OALLog(L" Do you want to erase unreserved blocks [-/y]? ");
// Get key
key = OALBLMenuReadKey(TRUE);
OALLog(L"%c\r\n", key);
// Depending on result
if (key != L'y' && key != L'Y') goto cleanUp;
// Open FMD
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALLog(L" Oops, can't open FMD driver\r\n");
goto cleanUp;
}
if (!FMD_GetInfo(&flashInfo))
{
OALLog(L" Oops, can't get flash geometry info\r\n");
goto cleanUp;
}
// First offset given
block = 0;
while (block < flashInfo.dwNumBlocks)
{
// If block is bad, we have to offset it
status = FMD_GetBlockStatus(block);
// Skip bad blocks
if ((status & BLOCK_STATUS_BAD) != 0)
{
OALLog(L" Skip bad block %d\r\n", block);
block++;
continue;
}
// Skip reserved blocks
if ((status & BLOCK_STATUS_RESERVED) != 0)
{
OALLog(L" Skip reserved block %d\r\n", block);
block++;
continue;
}
// Erase block
if (!FMD_EraseBlock(block))
{
OALLog(L" Oops, can't erase block %d - mark as bad\r\n", block);
FMD_SetBlockStatus(block, BLOCK_STATUS_BAD);
}
block++;
}
OALLog(L" Done\r\n");
// Block until a keypress
OALBLMenuReadKey(TRUE);
cleanUp:
if (hFMD != NULL) FMD_Deinit(hFMD);
return;
}
VOID
ShowFlashGeometry(OAL_BLMENU_ITEM *pMenu)
{
HANDLE hFMD;
PCI_REG_INFO regInfo;
FlashInfo flashInfo;
LPCWSTR pszType;
BLOCK_ID block;
UINT32 status;
UINT32 listmode=0;
UNREFERENCED_PARAMETER(pMenu);
regInfo.MemBase.Reg[0] = g_ulFlashBase;
hFMD = FMD_Init(NULL, ®Info, NULL);
if (hFMD == NULL)
{
OALLog(L" Oops, can't open FMD driver\r\n");
goto cleanUp;
}
if (!FMD_GetInfo(&flashInfo))
{
OALLog(L" Oops, can't get flash geometry info\r\n");
goto cleanUp;
}
switch (flashInfo.flashType)
{
case NAND:
pszType = L"NAND";
break;
case NOR:
pszType = L"NOR";
break;
default:
pszType = L"Unknown";
}
OALLog(L"\r\n");
OALLog(L" Flash Type: %s\r\n", pszType);
OALLog(L" Blocks: %d\r\n", flashInfo.dwNumBlocks);
OALLog(L" Bytes/block: %d\r\n", flashInfo.dwBytesPerBlock);
OALLog(L" Sectors/block: %d\r\n", flashInfo.wSectorsPerBlock);
OALLog(L" Bytes/sector: %d\r\n", flashInfo.wDataBytesPerSector);
switch (g_bootCfg.ECCtype)
{
case 0:
pszType = L"Hamming 1bit ECC";
break;
case 1:
pszType = L"BCH 4bit ECC";
break;
case 2:
pszType = L"BCH 8bit ECC";
break;
default:
pszType = L"Unknown";
}
OALLog(L" ECC mode: %s\r\n", pszType);
// now list bad/reserved sectors
// First offset given
block = 0;
while (block < flashInfo.dwNumBlocks)
{
// If block is bad, we have to offset it
status = FMD_GetBlockStatus(block);
// bad block
if ((status & BLOCK_STATUS_BAD) != 0)
{
if (listmode!=1)
{
OALLog(L"\r\n[bad] ");
listmode=1;
}
OALLog(L" %d", block);
block++;
continue;
}
// reserved block
if ((status & BLOCK_STATUS_RESERVED) != 0)
{
if (listmode!=2)
{
OALLog(L"\r\n[reserved]");
listmode=2;
}
OALLog(L" %d", block);
block++;
continue;
}
block++;
}
OALLog(L" Done\r\n");
cleanUp:
if (hFMD != NULL)
{
FMD_Deinit(hFMD);
}
return;
}
