static FT_Bool
ft_cubic_is_small_enough( FT_Vector* base,
FT_Angle *angle_in,
FT_Angle *angle_mid,
FT_Angle *angle_out )
{
FT_Vector d1, d2, d3;
FT_Angle theta1, theta2;
FT_Int close1, close2, close3;
d1.x = base[2].x - base[3].x;
d1.y = base[2].y - base[3].y;
d2.x = base[1].x - base[2].x;
d2.y = base[1].y - base[2].y;
d3.x = base[0].x - base[1].x;
d3.y = base[0].y - base[1].y;
close1 = FT_IS_SMALL( d1.x ) && FT_IS_SMALL( d1.y );
close2 = FT_IS_SMALL( d2.x ) && FT_IS_SMALL( d2.y );
close3 = FT_IS_SMALL( d3.x ) && FT_IS_SMALL( d3.y );
if ( close1 || close3 )
{
if ( close2 )
{
/* basically a point */
*angle_in = *angle_out = *angle_mid = 0;
}
else if ( close1 )
{
*angle_in = *angle_mid = FT_Atan2( d2.x, d2.y );
*angle_out = FT_Atan2( d3.x, d3.y );
}
else /* close2 */
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_mid = *angle_out = FT_Atan2( d2.x, d2.y );
}
}
else if ( close2 )
{
*angle_in = *angle_mid = FT_Atan2( d1.x, d1.y );
*angle_out = FT_Atan2( d3.x, d3.y );
}
else
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_mid = FT_Atan2( d2.x, d2.y );
*angle_out = FT_Atan2( d3.x, d3.y );
}
theta1 = ft_pos_abs( FT_Angle_Diff( *angle_in, *angle_mid ) );
theta2 = ft_pos_abs( FT_Angle_Diff( *angle_mid, *angle_out ) );
return FT_BOOL( theta1 < FT_SMALL_CUBIC_THRESHOLD &&
theta2 < FT_SMALL_CUBIC_THRESHOLD );
}
static FT_Orientation
ft_orientation_extremum_compute( FT_OrientationExtremumRec* extremum,
FT_Outline* outline )
{
FT_Vector *point, *first, *last, *prev, *next;
FT_Vector* points = outline->points;
FT_Angle angle_in, angle_out;
/* compute the previous and next points in the same contour */
point = points + extremum->index;
first = points + extremum->first;
last = points + extremum->last;
prev = point;
next = point;
do
{
prev = ( prev == first ) ? last : prev - 1;
if ( prev == point )
return FT_ORIENTATION_TRUETYPE; /* degenerate case */
} while ( prev->x != point->x || prev->y != point->y );
do
{
next = ( next == last ) ? first : next + 1;
if ( next == point )
return FT_ORIENTATION_TRUETYPE; /* shouldn't happen */
} while ( next->x != point->x || next->y != point->y );
/* now compute the orientation of the `out' vector relative */
/* to the `in' vector. */
angle_in = FT_Atan2( point->x - prev->x, point->y - prev->y );
angle_out = FT_Atan2( next->x - point->x, next->y - point->y );
return ( FT_Angle_Diff( angle_in, angle_out ) >= 0 )
? FT_ORIENTATION_TRUETYPE
: FT_ORIENTATION_POSTSCRIPT;
}
static FT_Bool
ft_conic_is_small_enough( FT_Vector* base,
FT_Angle *angle_in,
FT_Angle *angle_out )
{
FT_Vector d1, d2;
FT_Angle theta;
FT_Int close1, close2;
d1.x = base[1].x - base[2].x;
d1.y = base[1].y - base[2].y;
d2.x = base[0].x - base[1].x;
d2.y = base[0].y - base[1].y;
close1 = FT_IS_SMALL( d1.x ) && FT_IS_SMALL( d1.y );
close2 = FT_IS_SMALL( d2.x ) && FT_IS_SMALL( d2.y );
if ( close1 )
{
if ( close2 )
*angle_in = *angle_out = 0;
else
*angle_in = *angle_out = FT_Atan2( d2.x, d2.y );
}
else if ( close2 )
{
*angle_in = *angle_out = FT_Atan2( d1.x, d1.y );
}
else
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_out = FT_Atan2( d2.x, d2.y );
}
theta = ft_pos_abs( FT_Angle_Diff( *angle_in, *angle_out ) );
return FT_BOOL( theta < FT_SMALL_CONIC_THRESHOLD );
}
FT_Outline_Embolden( FT_Outline* outline,
FT_Pos strength )
{
FT_Vector* points;
FT_Vector v_prev, v_first, v_next, v_cur;
FT_Angle rotate, angle_in, angle_out;
FT_Int c, n, first;
FT_Int orientation;
if ( !outline )
return FT_Err_Invalid_Argument;
strength /= 2;
if ( strength == 0 )
return FT_Err_Ok;
orientation = FT_Outline_Get_Orientation( outline );
if ( orientation == FT_ORIENTATION_NONE )
{
if ( outline->n_contours )
return FT_Err_Invalid_Argument;
else
return FT_Err_Ok;
}
if ( orientation == FT_ORIENTATION_TRUETYPE )
rotate = -FT_ANGLE_PI2;
else
rotate = FT_ANGLE_PI2;
points = outline->points;
first = 0;
for ( c = 0; c < outline->n_contours; c++ )
{
int last = outline->contours[c];
v_first = points[first];
v_prev = points[last];
v_cur = v_first;
for ( n = first; n <= last; n++ )
{
FT_Vector in, out;
FT_Angle angle_diff;
FT_Pos d;
FT_Fixed scale;
if ( n < last )
v_next = points[n + 1];
else
v_next = v_first;
/* compute the in and out vectors */
in.x = v_cur.x - v_prev.x;
in.y = v_cur.y - v_prev.y;
out.x = v_next.x - v_cur.x;
out.y = v_next.y - v_cur.y;
angle_in = FT_Atan2( in.x, in.y );
angle_out = FT_Atan2( out.x, out.y );
angle_diff = FT_Angle_Diff( angle_in, angle_out );
scale = FT_Cos( angle_diff / 2 );
if ( scale < 0x4000L && scale > -0x4000L )
in.x = in.y = 0;
else
{
d = FT_DivFix( strength, scale );
FT_Vector_From_Polar( &in, d, angle_in + angle_diff / 2 - rotate );
}
outline->points[n].x = v_cur.x + strength + in.x;
outline->points[n].y = v_cur.y + strength + in.y;
v_prev = v_cur;
v_cur = v_next;
}
first = last + 1;
}
return FT_Err_Ok;
}
static void GK_Outline_Embolden(FT_Outline* outline,FT_Pos strength,int* x_left,int* x_right,int* y_bottom,int* y_top)
{
FT_Vector* points;
FT_Vector v_prev, v_first, v_next, v_cur;
FT_Angle rotate, angle_in, angle_out;
FT_Int c, n, first = 0;
FT_Int orientation;
FT_Int min_x = 35565, max_x = -35565, min_y = 35565, max_y = -35565;
FT_Int new_min_x = 35565, new_max_x = -35565, new_min_y = 35565, new_max_y = -35565;
if (!outline) return;
strength /= 2;
if ( strength == 0 ) return;
orientation = FT_Outline_Get_Orientation(outline);
if (orientation == FT_ORIENTATION_NONE) return;
#ifdef GLYPH_LOG
if (glyph_log) { fprintf(glyph_log," Emboldening the outline by %ld:\n",strength); }
#endif
if (orientation == FT_ORIENTATION_TRUETYPE) rotate = -FT_ANGLE_PI2;
else rotate = FT_ANGLE_PI2;
points = outline->points;
for ( c = 0; c < outline->n_contours; c++ )
{
int last = outline->contours[c];
v_first = points[first];
v_prev = points[last];
v_cur = v_first;
for ( n = first; n <= last; n++ )
{
FT_Vector in, out;
FT_Angle angle_diff;
FT_Pos d;
FT_Fixed scale;
if ( n < last ) v_next = points[n + 1];
else v_next = v_first;
/* compute the in and out vectors */
in.x = v_cur.x - v_prev.x;
in.y = v_cur.y - v_prev.y;
out.x = v_next.x - v_cur.x;
out.y = v_next.y - v_cur.y;
angle_in = FT_Atan2( in.x, in.y );
angle_out = FT_Atan2( out.x, out.y );
angle_diff = FT_Angle_Diff( angle_in, angle_out );
scale = FT_Cos( angle_diff / 2 );
if ( scale < 0x4000L && scale > -0x4000L ) in.x = in.y = 0;
else
{
d = FT_DivFix( strength, scale );
FT_Vector_From_Polar( &in, d, angle_in + angle_diff / 2 - rotate );
}
outline->points[n].x = v_cur.x + strength + in.x;
outline->points[n].y = v_cur.y + strength + in.y;
if (v_cur.x < min_x) min_x = v_cur.x;
if (v_cur.x > max_x) max_x = v_cur.x;
if (v_cur.y < min_y) min_y = v_cur.y;
if (v_cur.y > max_y) max_y = v_cur.y;
if (outline->points[n].x < new_min_x) new_min_x = outline->points[n].x;
if (outline->points[n].x > new_max_x) new_max_x = outline->points[n].x;
if (outline->points[n].y < new_min_y) new_min_y = outline->points[n].y;
if (outline->points[n].y > new_max_y) new_max_y = outline->points[n].y;
v_prev = v_cur;
v_cur = v_next;
}
first = last + 1;
}
*x_left = min_x - new_min_x;
*x_right = new_max_x - max_x;
*y_top = new_max_y - max_y;
*y_bottom = min_y - new_min_y;
#ifdef GLYPH_LOG
if (glyph_log)
{
fprintf(glyph_log," (%d..%d x %d..%d) -> (%d..%d x %d..%d)\n",
min_x,max_x,min_y,max_y,new_min_x,new_max_x,new_min_y,new_max_y);
}
#endif
}