static FT_Error
t1operator_seac( T1_Decoder decoder,
FT_Pos asb,
FT_Pos adx,
FT_Pos ady,
FT_Int bchar,
FT_Int achar )
{
FT_Error error;
FT_Int bchar_index, achar_index;
#if 0
FT_Int n_base_points;
FT_Outline* base = decoder->builder.base;
#endif
FT_Vector left_bearing, advance;
/* seac weirdness */
adx += decoder->builder.left_bearing.x;
/* `glyph_names' is set to 0 for CID fonts which do not */
/* include an encoding. How can we deal with these? */
if ( decoder->glyph_names == 0 )
{
FT_ERROR(( "t1operator_seac:" ));
FT_ERROR(( " glyph names table not available in this font!\n" ));
return PSaux_Err_Syntax_Error;
}
bchar_index = t1_lookup_glyph_by_stdcharcode( decoder, bchar );
achar_index = t1_lookup_glyph_by_stdcharcode( decoder, achar );
if ( bchar_index < 0 || achar_index < 0 )
{
FT_ERROR(( "t1operator_seac:" ));
FT_ERROR(( " invalid seac character code arguments\n" ));
return PSaux_Err_Syntax_Error;
}
/* if we are trying to load a composite glyph, do not load the */
/* accent character and return the array of subglyphs. */
if ( decoder->builder.no_recurse )
{
FT_GlyphSlot glyph = (FT_GlyphSlot)decoder->builder.glyph;
FT_GlyphLoader loader = glyph->internal->loader;
FT_SubGlyph subg;
/* reallocate subglyph array if necessary */
error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 );
if ( error )
goto Exit;
subg = loader->current.subglyphs;
/* subglyph 0 = base character */
subg->index = bchar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
FT_SUBGLYPH_FLAG_USE_MY_METRICS;
subg->arg1 = 0;
subg->arg2 = 0;
subg++;
/* subglyph 1 = accent character */
subg->index = achar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
subg->arg1 = (FT_Int)( adx - asb );
subg->arg2 = (FT_Int)ady;
/* set up remaining glyph fields */
glyph->num_subglyphs = 2;
glyph->subglyphs = loader->base.subglyphs;
glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
loader->current.num_subglyphs = 2;
goto Exit;
}
/* First load `bchar' in builder */
/* now load the unscaled outline */
FT_GlyphLoader_Prepare( decoder->builder.loader ); /* prepare loader */
error = t1_decoder_parse_glyph( decoder, bchar_index );
if ( error )
goto Exit;
/* save the left bearing and width of the base character */
/* as they will be erased by the next load. */
left_bearing = decoder->builder.left_bearing;
advance = decoder->builder.advance;
decoder->builder.left_bearing.x = 0;
decoder->builder.left_bearing.y = 0;
decoder->builder.pos_x = adx - asb;
decoder->builder.pos_y = ady;
/* Now load `achar' on top of */
/* the base outline */
error = t1_decoder_parse_glyph( decoder, achar_index );
if ( error )
goto Exit;
/* restore the left side bearing and */
/* advance width of the base character */
decoder->builder.left_bearing = left_bearing;
decoder->builder.advance = advance;
decoder->builder.pos_x = 0;
decoder->builder.pos_y = 0;
Exit:
return error;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which are used to keep original glyph coordinates */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
if ( metrics->clazz->script_hints_apply )
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transformation required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++ )
FT_Vector_Transform( cur, &subglyph->transform );
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = AF_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we eventually may consider another approach */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = AF_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error = 0;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
error = FT_Load_Glyph( face, glyph_index, load_flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
/* set linear metrics */
slot->linearHoriAdvance = slot->metrics.horiAdvance;
slot->linearVertAdvance = slot->metrics.vertAdvance;
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform
* is needed
*/
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which is used to keep original glyph coordinates */
error = FT_GlyphLoader_CheckPoints( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.extra_points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to hint the metrics according to the change in */
/* width/positioning that occured during the hinting process */
{
FT_Pos old_advance, old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[ AF_DIMENSION_HORZ ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( edge2 > edge1 )
{
old_advance = loader->pp2.x;
old_rsb = old_advance - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 5;
if ( old_rsb < 24 )
pp2x_uh += 5;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
#if 0
/* try to fix certain bad advance computations */
if ( loader->pp2.x + loader->pp1.x == edge2->pos && old_rsb > 4 )
loader->pp2.x += 64;
#endif
}
else
{
loader->pp1.x = FT_PIX_ROUND( loader->pp1.x );
loader->pp2.x = FT_PIX_ROUND( loader->pp2.x );
}
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now, read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transform required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* org = gloader->base.extra_points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++, org++ )
{
FT_Vector_Transform( cur, &subglyph->transform );
FT_Vector_Transform( org, &subglyph->transform );
}
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = FT_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we may consider another approach in the near future */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND(x);
y = FT_PIX_ROUND(y);
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
/* transform the hinted outline if needed */
if ( loader->transformed )
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
#endif
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
slot->outline = internal->loader->base.outline;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
#ifdef DEBUG_HINTER
af_debug_hinter = hinter;
#endif
Exit:
return error;
}