ViewerOperatorFactory::ViewerOperatorFactory() : ViewerBase()
{
OperatorPluginManager *operatorPluginMgr = GetOperatorPluginManager();
nTypes = operatorPluginMgr->GetNEnabledPlugins();
viewerPluginInfo = new ViewerOperatorPluginInfo*[nTypes];
for (int i = 0; i < nTypes; ++i)
{
viewerPluginInfo[i] = operatorPluginMgr->GetViewerPluginInfo(
operatorPluginMgr->GetEnabledID(i));
}
}
void
AddOperatorAction::Execute()
{
//
// Get the rpc arguments.
//
int type = args.GetOperatorType();
bool fromDefault = args.GetBoolFlag();
OperatorPluginManager *opMgr = GetOperatorPluginManager();
std::string name(opMgr->GetPluginName(opMgr->GetEnabledID(type)));
if (name == "Lineout") // PLUGIN SIN!!!
{
window->Lineout(fromDefault);
}
else
{
//
// Add the operator to the window's plot list.
//
bool applyToAllWindows = GetViewerState()->GetGlobalAttributes()->GetApplyWindow();
bool applyOperatorToAllPlots = GetViewerState()->GetGlobalAttributes()->GetApplyOperator();
if( applyToAllWindows )
{
for( int i=0; i< windowMgr->GetNumWindows(); ++i )
{
windowMgr->GetWindow(i)->GetPlotList()->
AddOperator(type, applyOperatorToAllPlots, fromDefault);
}
}
else // Just the active window
{
window->GetPlotList()->
AddOperator(type, applyOperatorToAllPlots, fromDefault);
}
}
}
void
ViewerQuery::CreateLineout(const bool fromDefault, const bool forceSampling)
{
//
// Grab information from the originating window.
//
ViewerPlotList *origList = originatingWindow->GetPlotList();
intVector plotIDs;
origList->GetActivePlotIDs(plotIDs);
int origPlotID = (plotIDs.size() > 0 ? plotIDs[0] : -1);
originatingPlot = origList->GetPlot(origPlotID);
std::string vName;
if (lineAtts->GetVarName() == "default")
vName = originatingPlot->GetVariableName();
else
vName = lineAtts->GetVarName();
std::string hdbName(originatingPlot->GetSource());
bool replacePlots = ViewerWindowManager::Instance()->
GetClientAtts()->GetReplacePlots();
int plotType = GetPlotPluginManager()->GetEnabledIndex("Curve_1.0");
ViewerPlotList *plotList = resultsWindow->GetPlotList();
// If the original plot list has a time slider corresponding to the
// the originating plot's hostdabase name, make sure that
// the the new plot list uses the same time slider.
if (origList->TimeSliderExists(hdbName))
{
int state, nStates;
origList->GetTimeSliderStates(hdbName, state, nStates);
plotList->CreateTimeSlider(hdbName, state);
plotList->SetActiveTimeSlider(hdbName);
}
plotList->SetHostDatabaseName(hdbName);
plotList->SetEngineKey(originatingPlot->GetEngineKey());
int pid = plotList->AddPlot(plotType, vName, replacePlots, false, false);
resultsPlot = plotList->GetPlot(pid);
resultsPlot->SetSILRestriction(originatingPlot->GetSILRestriction());
//
// Copy operators from the originating plot to the results (curve) plot.
//
for (int j = 0; j < originatingPlot->GetNOperators(); ++j)
{
ViewerOperator *op = originatingPlot->GetOperator(j);
//
// Keep a copy of the slice-plane atts, so that the line endpoints
// may be updated accordingly whent the slice-plane changes.
//
if (strcmp(op->GetName(), "Slice") == 0)
{
planeAtts = (PlaneAttributes *)op->GetOperatorAtts()->
CreateCompatible("PlaneAttributes");
}
resultsPlot->AddOperator(op->GetType());
ViewerOperator *newOp = resultsPlot->GetOperator(j);
newOp->SetOperatorAtts(op->GetOperatorAtts());
}
//
// Add the lineout operator.
//
int operatorType = GetOperatorPluginManager()->GetEnabledIndex("Lineout_1.0");
resultsPlot->AddOperator(operatorType, fromDefault);
//
// The client atts were already copied created,
// so now update them with the lineAtts.
//
resultsPlot->SetPlotAtts(lineAtts);
int id = resultsPlot->GetNOperators() -1;
resultsPlot->GetOperator(id)->SetOperatorAtts(lineAtts);
resultsPlot->GetOperator(id)->SetOperatorAtts(
ViewerQueryManager::Instance()->GetGlobalLineoutAtts());
if (forceSampling)
{
lineAtts->SetSamplingOn(true);
resultsPlot->GetOperator(id)->SetOperatorAtts(lineAtts);
}
plotList->RealizePlots();
}
ViewerQuery::ViewerQuery(const ViewerQuery *obj, int ts) : SimpleObserver(),
ViewerBase()
{
resPlotQueryInfo = 0;
planeAtts = 0;
lineAtts = new Line();
originatingWindow = obj->originatingWindow;
resultsWindow = obj->resultsWindow;
lineAtts->CopyAttributes(obj->lineAtts);
ViewerQueryManager *vqm = ViewerQueryManager::Instance();
if (vqm->GetGlobalLineoutAtts()->GetColorOption() ==
GlobalLineoutAttributes::CreateColor)
{
lineAtts->SetColor(vqm->GetColor());
}
originatingPlot = obj->originatingPlot;
std::string vName;
if (lineAtts->GetVarName() == "default")
vName = originatingPlot->GetVariableName();
else
vName = lineAtts->GetVarName();
bool replacePlots = ViewerWindowManager::Instance()->
GetClientAtts()->GetReplacePlots();
ViewerPlotList *plotList = resultsWindow->GetPlotList();
int plotType = GetPlotPluginManager()->GetEnabledIndex("Curve_1.0");
int pid = plotList->AddPlot(plotType, vName, replacePlots, false, false);
resultsPlot = plotList->GetPlot(pid);
resultsPlot->SetSILRestriction(originatingPlot->GetSILRestriction());
//
// Copy operators from the originating plot to the results (curve) plot.
//
for (int j = 0; j < originatingPlot->GetNOperators(); ++j)
{
ViewerOperator *op = originatingPlot->GetOperator(j);
//
// Keep a copy of the slice-plane atts, so that the line endpoints
// may be updated accordingly whent the slice-plane changes.
//
if (strcmp(op->GetName(), "Slice") == 0)
{
planeAtts = (PlaneAttributes *)op->GetOperatorAtts()->
CreateCompatible("PlaneAttributes");
}
resultsPlot->AddOperator(op->GetType());
ViewerOperator *newOp = resultsPlot->GetOperator(j);
newOp->SetOperatorAtts(op->GetOperatorAtts());
}
//
// Add the lineout operator.
//
int operatorType = GetOperatorPluginManager()->GetEnabledIndex("Lineout_1.0");
resultsPlot->AddOperator(operatorType, false);
//
// The client atts were already copied created,
// so now update them with the lineAtts.
//
resultsPlot->SetPlotAtts(lineAtts);
int id = resultsPlot->GetNOperators() -1;
resultsPlot->GetOperator(id)->SetOperatorAtts(lineAtts);
resultsPlot->GetOperator(id)->SetOperatorAtts(
ViewerQueryManager::Instance()->GetGlobalLineoutAtts());
resultsPlot->SetFollowsTime(true);
resultsPlot->SetCacheIndex(ts);
resultsPlot->SetFollowsTime(false);
plotList->RealizePlots();
//
// Connect to the resultsPlot
//
StartObservingPlot();
handlingTool = false;
}
