void LandsharkPaintball::Initialize(const std::string& rIpAddress)
{
if ( GetRunning() ) {
std::cout << "Process is already initialized, will return." << std::endl;
return;
}
m_SocketFileDescriptor = socket(AF_INET, SOCK_STREAM, DEFAULT_PROTOCOL);
if (m_SocketFileDescriptor < 0) {
std::stringstream ss;
ss << "Unable to create socket, error: " << strerror(errno);
throw std::runtime_error(ss.str());
}
int result = setsockopt(m_SocketFileDescriptor, SOL_SOCKET, SO_REUSEADDR, &REUSEADDR_OPTVAL, sizeof(REUSEADDR_OPTVAL));
if (result < 0) {
std::stringstream ss;
ss << "Unable to set socket option SO_REUSEADDR, error: " << strerror(errno);
throw std::runtime_error(ss.str());
}
struct sockaddr_in paintballServerAddress;
bzero((char *) &paintballServerAddress, sizeof(paintballServerAddress));
paintballServerAddress.sin_addr.s_addr = inet_addr(rIpAddress.c_str());
paintballServerAddress.sin_family = AF_INET;
paintballServerAddress.sin_port = htons( m_ControllerPort );
result = connect(m_SocketFileDescriptor, (struct sockaddr *) &paintballServerAddress,sizeof(paintballServerAddress));
if (result < 0) {
std::stringstream ss;
ss << "Unable to connect to socket with address: " << rIpAddress << ", error: " << strerror(errno);
throw std::runtime_error(ss.str());
}
char buffer[BUFFER_SIZE];
bzero(buffer, BUFFER_SIZE);
sprintf(buffer, "u;");
result = write(m_SocketFileDescriptor, buffer, strlen(buffer));
if (result < 0) {
std::stringstream ss;
ss << "Failed to write to socket, error: " << strerror(errno) << std::endl;
throw std::runtime_error(ss.str());
}
bzero(buffer, BUFFER_SIZE);
usleep(50000);
result = read(m_SocketFileDescriptor, buffer, BUFFER_SIZE - 1);
if (result < 0) {
std::stringstream ss;
ss << "Failed to read socket, error: " << strerror(errno) << std::endl;
throw std::runtime_error(ss.str());
}
std::cout << "[paintball] Paintball id: " << buffer;
}
void LandsharkPaintball::CommunicationProcess()
{
std::cout << "[paintball] starting thread" << std::endl;
unsigned int loopCount = 0;
boost::posix_time::time_duration processPeriod;
boost::posix_time::ptime startTime = boost::posix_time::microsec_clock::local_time();
while ( GetRunning() )
{
processPeriod = boost::posix_time::microsec_clock::local_time() - startTime;
long timeToSleep = m_DesiredProcessPeriod_us - processPeriod.total_microseconds();
if (timeToSleep > 0)
{
boost::this_thread::sleep(boost::posix_time::microseconds(timeToSleep));
}
startTime = boost::posix_time::microsec_clock::local_time();
//if (loopCount % m_ControllerUpdateRate)
{
boost::mutex::scoped_lock lock( m_ControlMutex );
switch (m_ControlMode)
{
case SINGLE_SHOT:
ShotControl('s');
break;
case TRIPLE_SHOT:
ShotControl('t');
break;
case BURST:
ShotControl('a');
break;
case IDLE:
break;
default:
break;
}
m_ControlMode = IDLE;
}
++loopCount;
} // while
std::cout << "[paintball] stopping thread" << std::endl;
}
void InitAtmelControlProc()
{
//bind to this process' message queue
Bind(ATMELMQNUM);
//wait for synchronization message from keyboardProc to begin
char dummyBlock[1];
int syncSrc = KBMQNUM;
Recv(&syncSrc, ATMELMQNUM, dummyBlock, 1);
//local variables for message passing
int src = -1;
char recvBuffer[RECV_BUFFER_SIZE];
char sendHallSensorBuffer[SEND_HS_BUFFER_SIZE];
//initialize cursor position for hall sensor display output
//UpdateCursorPos(&(GetRunning()->cursorPosState), 23, 2);
int currentCursorRow = HS_CURSOR_UPPER_LIMIT;
UpdateCursorPos(&(GetRunning()->cursorPosState), currentCursorRow, 2);
bool initialized = false; //set to true once track hardware has been initialized
while(true) //the main loop of the Atmel Communication Process
{
src = -1; //-1 means "accept messages from any source"
//clean the receive buffer
int j;
for(j = 0; j < 6; j++)
{
recvBuffer[j] = 0;
}
//blocking recieve waiting for messages
Recv(&src, ATMELMQNUM, recvBuffer, -1);//because the src is unknown, size is determined by the sender
switch(src) //two sources are supported: HS Process and Loco process.
{
case HSMQNUM:
{
switch(recvBuffer[0])
{
case 0: //reset sensors and set switches
{
//init HS queues of atmel 1
SendPacket *out_packet = InitHallSensorQueueInit();
RecvPacket *in_packet = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet, in_packet, 1);
//init HS queues of atmel 3
SendPacket *out_packet2 = InitHallSensorQueueInit();
RecvPacket *in_packet2 = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet2, in_packet2, 3);
if(GetRecvSuccess(in_packet) && GetRecvSuccess(in_packet2))
{
//reset all HS (atmel 1 only)
SendPacket *out_packet3 = InitHallSensorAllReset();
RecvPacket *in_packet3 = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet3, in_packet3, 1);
Deallocate((uint32_t)out_packet);
Deallocate((uint32_t)in_packet);
Deallocate((uint32_t)out_packet2);
Deallocate((uint32_t)in_packet2);
Deallocate((uint32_t)out_packet3);
Deallocate((uint32_t)in_packet3);
initialized = true;
//send back to HS to acknowledge that HS queues were initialized
Send(ATMELMQNUM, HSMQNUM, recvBuffer, sizeof(char));
}
else
{
char *failure = "FATAL ERROR initalizing HS queues\n\r\0";
WriteString(failure);
}
break;
}
default://1 or 3
{
if(initialized) //do not act on other messages if we haven't initialized the queues yet
{
//query which hall sensor was triggered
SendPacket *out_packet = InitHallSensorInput();
RecvPacket *in_packet = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet, in_packet, (int)recvBuffer[0]);
//examine the rx'd packet to determine the hall sensor number
int sensorNum = -1;
bool successfulSPI = GetHallSensorNum(in_packet, &sensorNum);
Deallocate((uint32_t)out_packet);
Deallocate((uint32_t)in_packet);
//send which hall sensor triggered to LocoProc
if(successfulSPI)
{
//output the HS number to the console
char testHSNum[4];
testHSNum[0] = sensorNum/10 + 0x30;
testHSNum[1] = sensorNum%10 + 0x30;
testHSNum[2] = ' ';
testHSNum[3] = '\0';
UpdateCursorPos(&(GetRunning()->cursorPosState), currentCursorRow, 2);
OutputCursorPositionSequence(&(GetRunning()->cursorPosState));
WriteStringChar('+');
WriteString(testHSNum);
//make sure the stream of hall sensor printouts stays on the screen.
currentCursorRow = (currentCursorRow == HS_CURSOR_LOWER_LIMIT)? HS_CURSOR_UPPER_LIMIT: currentCursorRow +1;
//send reset acknowledgement to Atmel 1 for hall sensor triggering
SendPacket *out_packet2 = InitHallSensorSingleReset(sensorNum);
RecvPacket *in_packet2 = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet2, in_packet2, 1);
if(GetRecvSuccess(in_packet2))
{
Deallocate((uint32_t)out_packet2);
Deallocate((uint32_t)in_packet2);
}
else
{
char *failure = "FATAL ERROR when acknowledging Hall Sensor event\n\r\0";
WriteString(failure);
}
if(lastSensorTriggered != sensorNum) //Some hall sensors will double-trigger intermittently as a train passes, so ignore successive duplicates
{
sendHallSensorBuffer[0] = (char)sensorNum;
//tell the LocoProc which hall sensor was just hit
Send(ATMELMQNUM, LOCOMQNUM, sendHallSensorBuffer, SEND_HS_BUFFER_SIZE);
}
lastSensorTriggered = sensorNum;
}
else
{
char *failure = "FATAL ERROR when getting hall sensor number\n\r\0";
WriteString(failure);
}
}
break;
}
}
break;
}
case LOCOMQNUM:
{
switch(recvBuffer[0])
{
case SPI_SEGMENT_SPEED_DIR://set segment speed and dir
{
SendPacket *out_packet = InitDirAndMagFor1Section(recvBuffer[1], recvBuffer[2], recvBuffer[3]);
RecvPacket *in_packet = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet, in_packet, 1);
if(GetRecvSuccess(in_packet))
{
Deallocate((uint32_t)out_packet);
Deallocate((uint32_t)in_packet);
}
else
{
char *failure = "FATAL ERROR when setting single segment speed\n\r\0";
WriteString(failure);
}
break;
}
case SPI_SWITCH://set switch as thrown or straight
{
SendPacket *out_packet = InitSwitchControl(recvBuffer[1], recvBuffer[2]);
RecvPacket *in_packet = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet, in_packet, 2);
if(GetRecvSuccess(in_packet))
{
Deallocate((uint32_t)out_packet);
Deallocate((uint32_t)in_packet);
}
else
{
char *failure = "FATAL ERROR when using switch command\n\r\0";
WriteString(failure);
}
break;
}
case SPI_ALL_SEGMENTS_SPEED_DIR: //and init the switches
{
SendPacket *out_packet = InitDirAndMagForAllSections(0, 1);//1 means CCW
RecvPacket *in_packet = (RecvPacket*)Allocate(sizeof(RecvPacket));
SendAndReceivePacket(out_packet, in_packet, 1);
if(GetRecvSuccess(in_packet))
{
//straighten all switches
int i;
SendPacket *out_packet2 = InitSwitchControl(-1, 1);//1 means straight
RecvPacket *in_packet2 = (RecvPacket*)Allocate(sizeof(RecvPacket));
for(i = 1; i <= 9; i++)
{
out_packet2->arg1 = i;
SendAndReceivePacket(out_packet2, in_packet2, 2);
}
Deallocate((uint32_t)out_packet);
Deallocate((uint32_t)in_packet);
Deallocate((uint32_t)out_packet2);
Deallocate((uint32_t)in_packet2);
//acknowledge to loco proc that track is initialized
Send(ATMELMQNUM, LOCOMQNUM, recvBuffer, sizeof(char));
}
else
{
char *failure = "FATAL ERROR when setting all segments speed\n\r\0";
WriteString(failure);
}
break;
}
}
break;
}
}
}
}
