void InitRound(void)
{
std::cerr<<"DEBUG- InitRound\n";
Pac.zy=Pac.sy*BITMAP_Y; Pac.zx=Pac.sx*BITMAP_X; Pac.mcnt=0;
Pac.nextdir=DIR_STOP; Pac.cur=SPR_PACLEFT; Pac.speed=1*SPEED*CPU_SPEED;
Pac.mc=0; Pac.old=SPR_PACLEFT; Pac.dir=DIR_STOP;
Pac.bx=Pac.sx; Pac.by=Pac.sy;
Ghost0.zy=Ghost0.sy*BITMAP_Y; Ghost0.zx=Ghost0.sx*BITMAP_X;
Ghost0.old=SPR_GHOST; Ghost0.speed=1*SPEED*CPU_SPEED;
Ghost0.lastint=G_SMART; Ghost0.mc=0; Ghost0.cur=SPR_GHOST;
Ghost0.ly=Ghost0.sy; Ghost0.lx=Ghost0.sx;
Ghost0.bx=Ghost0.sx; Ghost0.by=Ghost0.sy;
Ghost0.dir=DIR_LEFT; Ghost0.nextdir=DIR_LEFT; Ghost0.mcnt=CountMax;
Ghost1.zy=Ghost1.sy*BITMAP_Y; Ghost1.zx=Ghost1.sx*BITMAP_X;
Ghost1.old=SPR_GHOST; Ghost1.speed=1*SPEED*CPU_SPEED;
Ghost1.lastint=G_SMART; Ghost1.mc=0; Ghost1.cur=SPR_GHOST;
Ghost1.ly=Ghost1.sy; Ghost1.lx=Ghost1.sx;
Ghost1.bx=Ghost1.sx; Ghost1.by=Ghost1.sy;
Ghost1.dir=DIR_RIGHT; Ghost1.nextdir=DIR_RIGHT; Ghost1.mcnt=CountMax;
Ghost2.zy=Ghost2.sy*BITMAP_Y; Ghost2.zx=Ghost2.sx*BITMAP_X;
Ghost2.old=SPR_GHOST; Ghost2.speed=1*SPEED*CPU_SPEED;
Ghost2.lastint=G_SMART; Ghost2.mc=0; Ghost2.cur=SPR_GHOST;
Ghost2.ly=Ghost2.sy; Ghost2.lx=Ghost2.sx;
Ghost2.bx=Ghost2.sx; Ghost2.by=Ghost2.sy;
Ghost2.dir=DIR_LEFT; Ghost2.nextdir=DIR_LEFT; Ghost2.mcnt=CountMax;
Ghost3.zy=Ghost3.sy*BITMAP_Y; Ghost3.zx=Ghost3.sx*BITMAP_X;
Ghost3.old=SPR_GHOST; Ghost3.speed=1*SPEED*CPU_SPEED;
Ghost3.lastint=G_SMART; Ghost3.mc=0; Ghost3.cur=SPR_GHOST;
Ghost3.ly=Ghost3.sy; Ghost3.lx=Ghost3.sx;
Ghost3.bx=Ghost3.sx; Ghost3.by=Ghost3.sy;
Ghost3.dir=DIR_RIGHT; Ghost3.nextdir=DIR_RIGHT; Ghost3.mcnt=CountMax;
GoHome(&Ghost0); GoHome(&Ghost1);
GoHome(&Ghost2); GoHome(&Ghost3);
BlueCount=0; GhostEatCount=100;
}
void nofGeologist::LostWork()
{
flag = 0;
switch(state)
{
default: break;
// Wenn wir noch hingehen, dann zurückgehen
case STATE_FIGUREWORK:
{
GoHome();
} break;
case STATE_GOTOFLAG:
{
// dann sofort rumirren, wenn wir zur Flagge gehen
StartWandering();
state = STATE_FIGUREWORK;
} break;
case STATE_GEOLOGIST_GOTONEXTNODE:
case STATE_GEOLOGIST_DIG:
case STATE_GEOLOGIST_CHEER:
{
gwg->GetNode(node_goal).reserved = false;;
} break;
}
}
void nofPlaner::Walked()
{
/// Zur Baustelle zurückgelaufen? (=fertig)
if(pos == building_site->GetPos())
{
// Baustelle Bescheid sagen
building_site->PlaningFinished();
state = STATE_FIGUREWORK;
// Nach Hause laufen bzw. auch rumirren
rs_pos = 0;
rs_dir = true;
cur_rs = gwg->GetSpecObj<noRoadNode>(pos)->routes[4];
building_site = 0;
GoHome();
StartWalking(4);
}
else
{
/// Anfangen zu arbeiten
current_ev = em->AddEvent(this, JOB_CONSTS[JOB_PLANER].work_length, 1);
state = STATE_PLANING;
}
}
void Hormiga::move()
{
switch (state)
{
case kNoBorn:
break;
case kForage:
// printf("antes kForage\n");
Forage();
// printf("despues kForage\n");
break;
case kGoHome:
// printf("antes kGoHome\n");
GoHome();
// printf("despues kGoHome\n");
break;
case kThirsty:
// printf("antes kThirsty\n");
Thirsty();
// printf("despues kThirsty\n");
break;
default:
break;
}
}
TQErrCode CMotorsBase::MoveHome(TMotorAxis Axis)
{
if(Axis==AXIS_ALL)
return HomeAll();
return GoHome(Axis);
}
void nofPassiveSoldier::LeaveBuilding()
{
// Nach Hause in ein Lagerhaus gehen
rs_dir = true;
rs_pos = 1;
cur_rs = building->routes[4];
GoHome();
building = 0;
}
/// Geht wieder zurück zur Flagge und dann nach Hause
void nofFlagWorker::GoToFlag()
{
// Zur Flagge zurücklaufen
// Bin ich an der Fahne?
if(pos == flag->GetPos())
{
// nach Hause gehen
nobBaseWarehouse* wh = gwg->GetPlayer(player).FindWarehouse(*flag, FW::AcceptsFigure(job_), true, false);
if(wh)
{
GoHome(wh);
// Vorgaukeln, dass wir ein Stück Straße bereits geschafft haben
// damit wir mit WalkToGoal weiter bis zum Ziel laufen können
cur_rs = &emulated_wanderroad;
rs_pos = 0;
WalkToGoal();
}
else
{
// Weg führt nicht mehr zum Lagerhaus, dann rumirren
StartWandering();
Wander();
}
// Da wir quasi "freiwillig" nach Hause gegangen sind ohne das Abreißen der Flagge, auch manuell wieder
// "abmelden"
gwg->GetPlayer(player).RemoveFlagWorker(this);
state = STATE_FIGUREWORK;
flag = NULL;
}
else
{
// Weg suchen
unsigned char dir = gwg->FindHumanPath(pos, flag->GetPos(), 40);
// Wenns keinen gibt, rumirren, ansonsten hinlaufen
if(dir == 0xFF)
{
Abrogate();
StartWandering();
Wander();
state = STATE_FIGUREWORK;
flag = NULL;
}
else
{
StartWalking(dir);
}
}
}
void CBCGPIE7DemoView::OnInitialUpdate()
{
CHtmlView::OnInitialUpdate ();
m_nFontSize = 2l;
SetOffline (m_bWorkOffline);
if (m_bGoAddress)
{
GoHome();
}
}
void CMfcieView::OnInitialUpdate()
{
// Go to the home page initially
CHtmlView::OnInitialUpdate();
CString strCmdLine(AfxGetApp()->m_lpCmdLine);
if(strCmdLine == _T(""))
{
GoHome();
}
else
{
Navigate(strCmdLine);
}
}
void nofBuilder::LostWork()
{
building_site = NULL;
if(state == STATE_FIGUREWORK)
GoHome();
else
{
// Event abmelden
em->RemoveEvent(current_ev);
StartWandering();
Wander();
state = STATE_FIGUREWORK;
}
}
void nofScout_Free::LostWork()
{
flag = 0;
switch(state)
{
default: break;
// Wenn wir noch hingehen, dann zurückgehen
case STATE_FIGUREWORK:
{
GoHome();
} break;
case STATE_GOTOFLAG:
case STATE_SCOUT_SCOUTING:
{
// dann sofort rumirren, wenn wir zur Flagge gehen
StartWandering();
state = STATE_FIGUREWORK;
} break;
}
}
void nofGeologist::LostWork()
{
flag = nullptr;
switch(state)
{
default:
break;
// Wenn wir noch hingehen, dann zurückgehen
case STATE_FIGUREWORK: { GoHome();
}
break;
case STATE_GOTOFLAG:
{
// dann sofort rumirren, wenn wir zur Flagge gehen
StartWandering();
state = STATE_FIGUREWORK;
}
break;
}
}
// Goes to home position (without interrupt), then lowers the build platform to
// the PDMS in order to calibrate and/or start a print
bool Motor::GoToStartPosition()
{
EnableMotors();
GoHome(false);
std::vector<MotorCommand> commands;
// set rotation parameters
commands.push_back(MotorCommand(MC_ROT_SETTINGS_REG, MC_JERK,
_settings.GetInt(R_START_PRINT_JERK)));
commands.push_back(MotorCommand(MC_ROT_SETTINGS_REG, MC_SPEED,
R_SPEED_FACTOR * _settings.GetInt(R_START_PRINT_SPEED)));
int startAngle = _settings.GetInt(R_START_PRINT_ANGLE) / R_SCALE_FACTOR;
if (startAngle != 0)
{
// rotate to the start position
commands.push_back(MotorCommand(MC_ROT_ACTION_REG, MC_MOVE,
startAngle));
}
// set Z motion parameters
commands.push_back(MotorCommand(MC_Z_SETTINGS_REG, MC_JERK,
_settings.GetInt(Z_START_PRINT_JERK)));
commands.push_back(MotorCommand(MC_Z_SETTINGS_REG, MC_SPEED,
Z_SPEED_FACTOR * _settings.GetInt(Z_START_PRINT_SPEED)));
// move down to the PDMS
commands.push_back(MotorCommand(MC_Z_ACTION_REG, MC_MOVE,
_settings.GetInt(Z_START_PRINT_POSITION)));
// request an interrupt when these commands are completed
commands.push_back(MotorCommand(MC_GENERAL_REG, MC_INTERRUPT));
return SendCommands(commands);
}
TQErrCode CMotorsDummy::GoHome (TMotorAxis Axis,bool IgnoreBumperImpact)
{
long EndPosition =0;
CQLog::Write(LOG_TAG_MOTORS,"Home: %s",PrintAxis(Axis).c_str());
if(m_ParamsMgr->AllowEmulationDelay)
QSleepSec(1);
if(Axis==AXIS_ALL)
{
for(int i=AXIS_X;i<MAX_AXIS;i++)
GoHome(static_cast<TMotorAxis>(i),IgnoreBumperImpact);
}
else
{
AxisUnderMovement[Axis] = true;
UpdateAxisLocation(Axis,0L);
UpdateAxisHomePerformed(Axis,true);
m_LastSolicitedPositions[Axis] = GetAxisSolicitedLocation(Axis);
KeepAxisSolicitedLocation(Axis,EndPosition);
FrontEndInterface->UpdateStatus(FE_CURRENT_X_AXIS_POSITION+Axis,(int)EndPosition);
}
return Q_NO_ERROR;
}
void nofPlaner::LostWork()
{
building_site = 0;
if(state == STATE_FIGUREWORK)
GoHome();
else
{
// Event ggf. abmelden
if(state == STATE_PLANING)
{
em->RemoveEvent(current_ev);
/// Sounds abmelden
SOUNDMANAGER.WorkingFinished(this);
}
StartWandering();
// wenn wir schon laufen, nicht nochmal laufen!
if(state != STATE_WALKING)
Wander();
state = STATE_FIGUREWORK;
}
}
//------------------------------------------------------------------------------
void main(void)
{
WDTCTL = WDTPW+WDTHOLD; // Stop watchdog timer
FCTL2 = FWKEY + FSSEL0 + FN0; // MCLK/2 for Flash Timing Generator
read_flash_segA();
Rs232_Init(); // RS232 初始化 115200 P3
TDCM3_Init(); // 電子羅盤 初始化
P4DIR = 0xff; // Set P4. to output direction
P4OUT = 0;
WDT_flag = true;
TBCTL = TBSSEL_2 + MC_1; // SCLK, up-down mode PWM timeClock
AD_Init();
WDTCTL = WDT_ARST_1000; //--開狗
CloseMotorPower(); //----開電測試系統
// TimerA 啟動讀秒
TACCTL0 = CCIE; // CCR0 interrupt enabled
TACCR0 = 16384-1; // for 0.5 Hz
TACTL = TASSEL_1 + MC_1; // ACLK, contmode
// _BIS_SR(GIE);
Setting_mode = true;
long int cou_delay;
while(Setting_mode){ //---- setting mode
if(Set_OriginX_flag){
Set_OriginX_flag = 0;
OpenMotorPower();
cou_delay = (long int)motor_T_AD * 1150; // delay
while(cou_delay > 0){ cou_delay--;}
DoTheAd(AD_AVGtime,1);
CloseMotorPower();
Set_OriginX = (int)(Angle_X*100);
write_flash_segA();
}
if(Set_OriginY_flag){
Set_OriginY_flag = 0;
OpenMotorPower();
cou_delay = (long int)motor_T_AD * 1150; // delay
while(cou_delay > 0){ cou_delay--;}
DoTheAd(AD_AVGtime,1);
CloseMotorPower();
Set_OriginY = (int)(Angle_Y*100);
write_flash_segA();
}
_BIS_SR(LPM0_bits + GIE);
}
IE2 &= ~URXIE1 ; // Disable USART1 RX interrupt
ReStart_Sec += ((unsigned long int)ReStart_Day * 3600); //--
// ReStart_Sec += ((unsigned long int)ReStart_Day * 60); //-- 每隔分鐘數
PwmSet();
int testRun = 0;
Leveling = true;
while(1) //-------------- working mode
{
if(Leveling){
WDTCTL = WDTPW+WDTHOLD; // Stop watchdog timer
TACCTL0 &= ~CCIE; // close timer
Leveling = false;
outPutcount = false;
//TDCM3_Enable();
testRun++;
sprintf(string,"this is %02d time \r\n",testRun); UART1_SendStr(string);
OpenMotorPower(); //----開電
WDTCTL = WDTPW+WDTHOLD; // Stop watchdog timer
long int cou = (long int)motor_T_AD * 1150; // 100Hz delay
while(cou > 0){ cou--; }
GoToRange_V2();
GoHome();
CloseMotorPower(); //----關電
outPutcount = true;
TACCTL0 |= CCIE; // open timer
}
_BIS_SR(LPM0_bits + GIE); // Enter LPM0, Enable interrupts
}
}
void nofPassiveSoldier::NotNeeded()
{
building = 0;
GoHome();
}
static void FileMenuItem( a_window *wnd, gui_ctl_id id, int row, int piece )
{
address addr;
mod_handle mod;
bool has_addr;
bool has_popitem;
file_window *file = WndFile( wnd );
piece=piece;
addr = GetRowAddr( file, row, id != MENU_FILE_ASSEMBLY );
has_addr = !IS_NIL_ADDR( addr );
switch( id ) {
case MENU_INITIALIZE:
has_popitem = ( *WndPopItem( wnd ) != NULLCHAR );
if( has_popitem && !ScanSelectedExpr( WndPopItem( wnd ) ) ) {
has_popitem = false;
}
WndMenuEnable( wnd, MENU_FILE_SHOW, true );
WndMenuEnable( wnd, MENU_FILE_SHOW_ADDRESS, true );
WndMenuEnable( wnd, MENU_FILE_SHOW_MODULE, true );
WndMenuEnable( wnd, MENU_FILE_FUNCTIONS, file->mod != NO_MOD );
WndMenuEnable( wnd, MENU_FILE_HOME, true );
addr = GetRowAddr( file, row, false );
WndMenuEnable( wnd, MENU_FILE_ASSEMBLY, !IS_NIL_ADDR( addr ) );
WndMenuEnable( wnd, MENU_FILE_WATCH, has_popitem );
WndMenuEnable( wnd, MENU_FILE_INSPECT, has_popitem );
WndMenuEnable( wnd, MENU_FILE_STEP_INTO, file->mod != NO_MOD && has_popitem );
WndMenuEnable( wnd, MENU_FILE_BREAK, has_popitem );
WndMenuEnable( wnd, MENU_FILE_RUN, has_addr );
WndMenuEnable( wnd, MENU_FILE_SKIP_TO_CURSOR, has_addr );
break;
case MENU_FILE_RUN:
GoToAddr( addr );
break;
case MENU_FILE_SKIP_TO_CURSOR:
SkipToAddr( addr );
break;
case MENU_FILE_BREAK:
BreakOnSelected( WndPopItem( wnd ) );
break;
case MENU_FILE_HOME:
GoHome();
break;
case MENU_FILE_SHOW_MODULE:
mod = file->mod;
if( DlgModName( LIT_DUI( New_Module ), &mod ) ) {
WndModInspect( mod );
}
break;
case MENU_FILE_SHOW_ADDRESS:
if( DlgCodeAddr( LIT_DUI( New_Addr ), &addr ) ) {
WndSrcInspect( addr );
}
break;
case MENU_FILE_STEP_INTO:
StepIntoFunction( WndPopItem( wnd ) );
break;
case MENU_FILE_INSPECT:
WndInspect( WndPopItem( wnd ) );
break;
case MENU_FILE_WATCH:
WndVarInspect( WndPopItem( wnd ) );
break;
case MENU_FILE_SEARCH:
WndSaveToHistory( SrchHistory, WndPopItem( wnd ) );
DbgWndSearch( wnd, false, DlgSearch( wnd, SrchHistory ) );
break;
case MENU_FILE_ASSEMBLY:
AsmWndFind( file->asw, addr, file->track );
break;
case MENU_FILE_LINE:
GotoLine( wnd );
break;
case MENU_FILE_FUNCTIONS:
WndFuncInspect( file->mod );
break;
}
}
void CBCGPIE7DemoView::OnGoHomePage()
{
GoHome();
}
void nofBuildingWorker::LostWork()
{
switch(state)
{
default:
break;
case STATE_FIGUREWORK:
{
// Auf Wegen nach Hause gehen
GoHome();
} break;
case STATE_WAITING1:
case STATE_WAITING2:
case STATE_WORK:
case STATE_WAITINGFORWARES_OR_PRODUCTIONSTOPPED:
case STATE_WAITFORWARESPACE:
case STATE_HUNTER_SHOOTING:
case STATE_HUNTER_EVISCERATING:
case STATE_CATAPULT_TARGETBUILDING:
case STATE_CATAPULT_BACKOFF:
{
// Bisheriges Event abmelden, da die Arbeit unterbrochen wird
if(state != STATE_WAITINGFORWARES_OR_PRODUCTIONSTOPPED && state != STATE_WAITFORWARESPACE)
{
em->RemoveEvent(current_ev);
current_ev = 0;
}
// Bescheid sagen, dass Arbeit abgebrochen wurde
WorkAborted();
// Rumirren
StartWandering();
Wander();
// Evtl. Sounds löschen
SOUNDMANAGER.WorkingFinished(this);
state = STATE_FIGUREWORK;
} break;
case STATE_ENTERBUILDING:
case STATE_CARRYOUTWARE:
case STATE_WALKTOWORKPOINT:
case STATE_WALKINGHOME:
case STATE_HUNTER_CHASING:
case STATE_HUNTER_FINDINGSHOOTINGPOINT:
case STATE_HUNTER_WALKINGTOCADAVER:
{
// Bescheid sagen, dass Arbeit abgebrochen wurde
WorkAborted();
// Rumirren
// Bei diesen States läuft man schon, darf also nicht noch zusätzlich Wander aufrufen, da man dann ja im Laufen nochmal losläuft!
StartWandering();
// Evtl. Sounds löschen
SOUNDMANAGER.WorkingFinished(this);
state = STATE_FIGUREWORK;
} break;
}
workplace = 0;
}
void CIEDemoView::OnInitialUpdate()
{
GoHome();
}
void CIEDemoView::OnGoStartPage()
{
GoHome();
}
void CMfcieView::OnGoStartPage()
{
GoHome();
}
/**
*
*
* @author OLiver
*/
void nofCarrier::LostWork()
{
workplace = 0;
em->RemoveEvent(productivity_ev);
productivity_ev = 0;
if(state == CARRS_FIGUREWORK)
GoHome();
else
{
// Wenn ich noch ne Ware in der Hand habe, muss die gelöscht werden
if(carried_ware)
{
carried_ware->WareLost(player);
delete carried_ware;
carried_ware = 0;
}
// Is this a boat carrier (i.e. he is on the water)
if(ct == CT_BOAT)
{
MapPoint tmpPos(pos);
if(state != CARRS_WAITFORWARE && state != CARRS_WAITFORWARESPACE)
{
// If we are walking choose the destination point as start point
// for the pathfinding!
tmpPos = gwg->GetNeighbour(tmpPos, GetCurMoveDir());
}
// Look for the shore
for(MapCoord tx = gwg->GetXA(tmpPos, 0), r = 1; r <= 5; tx = gwg->GetXA(tx, tmpPos.y, 0), ++r)
{
MapPoint t2(tx, tmpPos.y);
for(unsigned i = 2; i < 8; ++i)
{
for(MapCoord r2 = 0; r2 < r; t2 = gwg->GetNeighbour(t2, i % 6), ++r2)
{
if(gwg->IsCoastalPoint(t2) && gwg->IsNodeForFigures(t2))
{
shore_path = new std::vector<unsigned char>;
if(gwg->FindShipPath(tmpPos, t2, shore_path, NULL))
{
// Ok let's paddle to the coast
rs_pos = 0;
cur_rs = NULL;
if(state == CARRS_WAITFORWARE || state == CARRS_WAITFORWARESPACE)
WanderOnWater();
state = CARRS_BOATCARRIER_WANDERONWATER;
return;
}
}
}
}
}
}
StartWandering();
if(state == CARRS_WAITFORWARE || state == CARRS_WAITFORWARESPACE)
Wander();
}
state = CARRS_FIGUREWORK;
}
void nofBuilder::HandleDerivedEvent(const unsigned int id)
{
switch(state)
{
case STATE_WAITINGFREEWALK:
{
// Platz einnehmen
rel_x = next_rel_x;
rel_y = next_rel_y;
// Ware aufnehmen, falls es eine gibt
if(ChooseWare())
state = STATE_BUILDFREEWALK;
// Weiter drumrumlaufen
StartFreewalk();
} break;
case STATE_BUILDFREEWALK:
{
// Platz einnehmen
rel_x = next_rel_x;
rel_y = next_rel_y;
// Gibts noch was zu bauen?
if(building_steps_available)
{
// dann mal schön bauen
current_ev = em->AddEvent(this, 40, 1);
state = STATE_BUILD;
}
else if(building_site->IsBuildingComplete())
{
// fertig mit Bauen!
// Baustelle abreißen und Gebäude hinsetzen
// Gebäudetyp merken und das Volk des Gebäudes
BuildingType building_type = building_site->GetBuildingType();
Nation building_nation = building_site->GetNation();
state = STATE_FIGUREWORK;
// Baustelle abmelden
GameClientPlayer& owner = gwg->GetPlayer(player);
owner.RemoveBuildingSite(building_site);
// ggf. Baustellenfenster schließen
gwg->ImportantObjectDestroyed(building_site->GetPos());
// Baustelle kommt in den Bytehimmel
gwg->SetNO(NULL, building_site->GetPos());
delete building_site;
// KI-Event schicken
GAMECLIENT.SendAIEvent(new AIEvent::Building(AIEvent::BuildingFinished, pos, building_type), player);
noBuilding* bld = BuildingFactory::CreateBuilding(gwg, building_type, pos, player, building_nation);
// Special handling for storehouses and harbours
if(building_type == BLD_STOREHOUSE || building_type == BLD_HARBORBUILDING){
nobBaseWarehouse* wh = static_cast<nobBaseWarehouse*>(bld);
// Mich dort gleich einquartieren und nicht erst zurücklaufen
wh->AddFigure(this);
gwg->RemoveFigure(this, pos);
// Evtl Träger aus dem HQ wieder verwenden
owner.FindWarehouseForAllRoads();
owner.FindWarehouseForAllJobs(JOB_HELPER);
// Evtl gabs verlorene Waren, die jetzt in das HQ wieder reinkönnen
owner.FindClientForLostWares();
return;
}
// Nach Hause laufen bzw. auch rumirren
rs_pos = 0;
rs_dir = true;
cur_rs = gwg->GetSpecObj<noRoadNode>(pos)->routes[4];
building_site = 0;
GoHome();
StartWalking(4);
}
else
{
// Brauchen neues Material
// Ware aufnehmen, falls es eine gibt
if(!ChooseWare())
state = STATE_WAITINGFREEWALK;
// Weiter drumrumlaufen
StartFreewalk();
}
} break;
case STATE_BUILD:
{
// Sounds abmelden
SOUNDMANAGER.WorkingFinished(this);
// ein Bauschritt weniger, Haus um eins höher
--building_steps_available;
++building_site->build_progress;
// Fertig mit dem Bauschritt, dann an nächste Position gehen
state = STATE_BUILDFREEWALK;
StartFreewalk();
} break;
default: break;
}
}
void noFigure::WalkToGoal()
{
// Kein Ziel mehr --> Rumirren
if(!goal_)
{
StartWandering();
Wander();
return;
}
// Straße abgelaufen oder noch gar keine Straße vorhanden?
if(((cur_rs) ? (rs_pos == cur_rs->GetLength()) : true))
{
// Ziel erreicht?
// Bei dem Träger können das beide Flaggen sein!
MapPoint goal1, goal2;
if(GetGOT() == GOT_NOF_CARRIER && fs == FS_GOTOGOAL)
{
goal1 = static_cast<nofCarrier*>(this)->GetFirstFlag() ?
static_cast<nofCarrier*>(this)->GetFirstFlag()->GetPos() : MapPoint(0xFFFF, 0xFFFF);
goal2 = static_cast<nofCarrier*>(this)->GetSecondFlag() ?
static_cast<nofCarrier*>(this)->GetSecondFlag()->GetPos() : MapPoint(0xFFFF, 0xFFFF);
}
else
{
goal1 = goal_->GetPos();
goal2 = MapPoint(0xFFFF, 0xFFFF);
}
if(goal1 == pos || goal2 == pos)
{
if(fs == FS_GOHOME)
{
// Mann im Lagerhaus angekommen
gwg->RemoveFigure(this, pos);
static_cast<nobBaseWarehouse*>(goal_)->AddFigure(this);
}
else
{
// Zeug nullen
cur_rs = NULL;
rs_dir = 0;
rs_pos = 0;
goal_ = NULL;
// abgeleiteter Klasse sagen, dass das Ziel erreicht wurde
fs = FS_JOB;
GoalReached();
}
}
else
{
MapPoint next_harbor;
// Neuen Weg berechnen
unsigned char route = gwg->FindHumanPathOnRoads(gwg->GetSpecObj<noRoadNode>(pos), goal_, NULL, &next_harbor);
// Kein Weg zum Ziel... nächstes Lagerhaus suchen
if(route == 0xFF)
{
// Arbeisplatz oder Laghaus Bescheid sagen
Abrogate();
// Wir gehen jetzt nach Hause
GoHome();
// Evtl wurde kein Lagerhaus gefunden und wir sollen rumirren, dann tun wir das gleich
if(fs == FS_WANDER)
{
Wander();
return;
}
// Nach Hause laufen...
WalkToGoal();
return;
}
// Oder müssen wir das Schiff nehmen?
else if(route == SHIP_DIR)
{
// Uns in den Hafen einquartieren
noBase* nob;
if((nob = gwg->GetNO(pos))->GetGOT() != GOT_NOB_HARBORBUILDING)
{
// Es gibt keinen Hafen mehr -> nach Hause gehen
// Arbeisplatz oder Laghaus Bescheid sagen
Abrogate();
// Wir gehen jetzt nach Hause
GoHome();
// Evtl wurde kein Lagerhaus gefunden und wir sollen rumirren, dann tun wir das gleich
if(fs == FS_WANDER)
{
Wander();
return;
}
// Nach Hause laufen...
WalkToGoal();
return;
}
// Uns in den Hafen einquartieren
cur_rs = NULL; // wir laufen nicht mehr auf einer Straße
gwg->RemoveFigure(this, pos);
static_cast<nobHarborBuilding*>(nob)->AddFigureForShip(this, next_harbor);
return;
}
// Nächste Straße wollen, auf der man geht
cur_rs = gwg->GetSpecObj<noRoadNode>(pos)->routes[route];
StartWalking(route);
rs_pos = 0;
rs_dir = (gwg->GetSpecObj<noRoadNode>(pos) == cur_rs->GetF1()) ? false : true;
}
}
else
{
StartWalking(cur_rs->GetDir(rs_dir, rs_pos));
}
}
void CWebView::OnGoHome()
{
GoHome();
}
TQErrCode CMotorsBase::HomeAll(void)
{
return GoHome(AXIS_ALL);
}
