/**
* @brief Receive data in interrupt mode.
* @param hcec: CEC handle.
* Function called under interruption only, once
* interruptions have been enabled by HAL_CEC_Receive_IT()
* @retval HAL status
*/
static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
{
static uint32_t temp;
if(hcec->RxState == HAL_CEC_STATE_BUSY_RX)
{
temp = hcec->Instance->CSR;
/* Store received data */
hcec->RxXferSize++;
*hcec->Init.RxBuffer++ = hcec->Instance->RXD;
/* Acknowledge received byte by writing 0x00 */
MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_RECEIVE_MASK, 0x00U);
/* If the End Of Message is reached */
if(HAL_IS_BIT_SET(temp, CEC_FLAG_REOM))
{
/* Interrupts are not disabled due to transmission still ongoing */
hcec->RxState = HAL_CEC_STATE_READY;
HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Receive data in interrupt mode.
* @param hcec: CEC handle.
* Function called under interruption only, once
* interruptions have been enabled by HAL_CEC_Receive_IT()
* @retval HAL status
*/
static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
{
static uint32_t temp;
uint32_t tmp_state = 0;
tmp_state = hcec->State;
if((tmp_state == HAL_CEC_STATE_BUSY_RX) || (tmp_state == HAL_CEC_STATE_BUSY_TX_RX))
{
temp = hcec->Instance->CSR;
/* Store received data */
*hcec->pRxBuffPtr++ = hcec->Instance->RXD;
/* Acknowledge received byte by writing 0x00 */
MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_RECEIVE_MASK, 0x00);
/* Increment the number of received data */
if(hcec->RxXferSize == CEC_RXXFERSIZE_INITIALIZE)
{
hcec->RxXferSize = 0;
}
else
{
hcec->RxXferSize++;
}
/* If the End Of Message is reached */
if(HAL_IS_BIT_SET(temp, CEC_FLAG_REOM))
{
if(hcec->State == HAL_CEC_STATE_BUSY_TX_RX)
{
/* Interrupts are not disabled due to transmission still ongoing */
hcec->State = HAL_CEC_STATE_BUSY_TX;
}
else
{
/* Disable the CEC Transmission Interrupts */
__HAL_CEC_DISABLE_IT(hcec, CEC_IT_IE);
hcec->State = HAL_CEC_STATE_READY;
}
HAL_CEC_RxCpltCallback(hcec);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
else
{
return HAL_BUSY;
}
}
/**
* @brief This function handles CEC interrupt requests.
* @param hcec: CEC handle
* @retval None
*/
void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
{
/* save interrupts register for further error or interrupts handling purposes */
uint32_t reg = 0U;
reg = hcec->Instance->ISR;
/* ----------------------------Arbitration Lost Management----------------------------------*/
/* CEC TX arbitration error interrupt occurred --------------------------------------*/
if((reg & CEC_FLAG_ARBLST) != RESET)
{
hcec->ErrorCode = HAL_CEC_ERROR_ARBLST;
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
}
/* ----------------------------Rx Management----------------------------------*/
/* CEC RX byte received interrupt ---------------------------------------------------*/
if((reg & CEC_FLAG_RXBR) != RESET)
{
/* reception is starting */
hcec->RxState = HAL_CEC_STATE_BUSY_RX;
hcec->RxXferSize++;
/* read received byte */
*hcec->Init.RxBuffer++ = hcec->Instance->RXDR;
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
}
/* CEC RX end received interrupt ---------------------------------------------------*/
if((reg & CEC_FLAG_RXEND) != RESET)
{
/* clear IT */
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
/* Rx process is completed, restore hcec->RxState to Ready */
hcec->RxState = HAL_CEC_STATE_READY;
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
hcec->Init.RxBuffer -= hcec->RxXferSize;
HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
hcec->RxXferSize = 0U;
}
/* ----------------------------Tx Management----------------------------------*/
/* CEC TX byte request interrupt ------------------------------------------------*/
if((reg & CEC_FLAG_TXBR) != RESET)
{
if (hcec->TxXferCount == 0U)
{
/* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
__HAL_CEC_LAST_BYTE_TX_SET(hcec);
hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
}
else
{
hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
hcec->TxXferCount--;
}
/* clear Tx-Byte request flag */
__HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR);
}
/* CEC TX end interrupt ------------------------------------------------*/
if((reg & CEC_FLAG_TXEND) != RESET)
{
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND);
/* Tx process is ended, restore hcec->gState to Ready */
hcec->gState = HAL_CEC_STATE_READY;
/* Call the Process Unlocked before calling the Tx call back API to give the possibility to
start again the Transmission under the Tx call back API */
__HAL_UNLOCK(hcec);
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
HAL_CEC_TxCpltCallback(hcec);
}
/* ----------------------------Rx/Tx Error Management----------------------------------*/
if ((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != 0U)
{
hcec->ErrorCode = reg;
__HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR|HAL_CEC_ERROR_BRE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|HAL_CEC_ERROR_RXACKE|HAL_CEC_ERROR_TXUDR|HAL_CEC_ERROR_TXERR|HAL_CEC_ERROR_TXACKE);
if((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE)) != RESET)
{
hcec->Init.RxBuffer-=hcec->RxXferSize;
hcec->RxXferSize = 0U;
hcec->RxState = HAL_CEC_STATE_READY;
}
else if (((reg & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != RESET) && ((reg & CEC_ISR_ARBLST) == RESET))
{
/* Set the CEC state ready to be able to start again the process */
hcec->gState = HAL_CEC_STATE_READY;
}
/* Error Call Back */
HAL_CEC_ErrorCallback(hcec);
}
}
/**
* @brief Receive data in interrupt mode.
* @param hcec: CEC handle.
* Function called under interruption only, once
* interruptions have been enabled by HAL_CEC_Receive_IT()
* @retval HAL status
*/
static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
{
uint32_t tempisr;
/* Three different conditions are tested to carry out the RX IT processing:
* - the IP is in reception stand-by (the IP state is HAL_CEC_STATE_STANDBY_RX) and
* the reception of the first byte is starting
* - a message reception is already on-going (the IP state is HAL_CEC_STATE_BUSY_RX)
* and a new byte is being received
* - a transmission has just been started (the IP state is HAL_CEC_STATE_BUSY_TX)
* but has been interrupted by a new message reception or discarded due to
* arbitration loss: the reception of the first or higher priority message
* (the arbitration winner) is starting */
if ((hcec->State == HAL_CEC_STATE_STANDBY_RX)
|| (hcec->State == HAL_CEC_STATE_BUSY_RX)
|| (hcec->State == HAL_CEC_STATE_BUSY_TX))
{
/* reception is starting */
hcec->State = HAL_CEC_STATE_BUSY_RX;
tempisr = (uint32_t) (hcec->Instance->ISR);
if ((tempisr & CEC_FLAG_RXBR) != 0)
{
/* Process Locked */
__HAL_LOCK(hcec);
/* read received byte */
*hcec->pRxBuffPtr++ = hcec->Instance->RXDR;
/* if last byte has been received */
if ((tempisr & CEC_FLAG_RXEND) != 0)
{
/* clear IT */
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR|CEC_FLAG_RXEND);
/* RX interrupts are not disabled at this point.
* Indeed, to disable the IT, the IP must be disabled first
* which resets the TXSOM flag. In case of arbitration loss,
* this leads to a transmission abort.
* Therefore, RX interruptions disabling if so required,
* is done in HAL_CEC_RxCpltCallback */
/* IP state is moved to READY.
* If the IP must remain in standby mode to listen
* any new message, it is up to HAL_CEC_RxCpltCallback
* to move it again to HAL_CEC_STATE_STANDBY_RX */
hcec->State = HAL_CEC_STATE_READY;
/* Call the Process Unlocked before calling the Rx call back API */
__HAL_UNLOCK(hcec);
HAL_CEC_RxCpltCallback(hcec);
return HAL_OK;
}
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
hcec->RxXferSize++;
/* Process Unlocked */
__HAL_UNLOCK(hcec);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
else
{
return HAL_BUSY;
}
}
