void api_standby_led_onoff(BOOL onoff)
{
#if (SYS_MAIN_BOARD == BOARD_DB_M3602_02V01 || SYS_MAIN_BOARD == BOARD_DB_M3602_04V01)
// Turn On Standby LED
HAL_GPIO_BIT_DIR_SET(STANDBY_LED_POS, HAL_GPIO_O_DIR);
if (onoff)
HAL_GPIO_BIT_SET(STANDBY_LED_POS, 0);
else
HAL_GPIO_BIT_SET(STANDBY_LED_POS, 1);
#endif
}
static void pan_set_gpio(UINT8 pos, UINT8 val)
{
if(pos != GPIO_NULL)
{
HAL_GPIO_BIT_DIR_SET(pos, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(pos, val);
}
}
void ide_enable(UINT32 gpio_cs, UINT32 polar)
{
HAL_GPIO_BIT_DIR_SET(gpio_cs, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(gpio_cs, polar);
if (ALI_S3602 == sys_ic_get_chip_id())
{
(*(volatile UINT8 *)(0xb800008c)) &= (~0x04);
}
}
void sd_enable(UINT32 gpio_cs, UINT32 polar, UINT32 gpio_int, UINT32 gpio_lock)
{
HAL_GPIO_BIT_DIR_SET(gpio_cs, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(gpio_cs, polar);
set_sd_gpio(gpio_int, gpio_lock);
if (ALI_S3602 == sys_ic_get_chip_id())
{
(*(volatile UINT8 *)(0xb800008c)) |= (0x04);
}
}
void v12_power_short_detect(UINT32 nouse)
{
#if(defined(SYS_12V_SWITCH) && defined(SYS_12V_SHORT_DET))
#if(SYS_12V_SWITCH==SYS_FUNC_ON && SYS_12V_SHORT_DET == SYS_FUNC_ON)
INT32 v12,v12_short;
static INT32 oldv12 = -1;
static UINT8 v12_short_cut =0 ;
static UINT32 count = 0;
#define V12_POWER_RESET_WAIT_TIME 100
if(!v12_short_cut)
{
if(!v12_detect)
return;
HAL_GPIO_BIT_DIR_SET(SYS_12V_SHORT_DET_GPIO, HAL_GPIO_I_DIR);
v12_short = HAL_GPIO_BIT_GET(SYS_12V_SHORT_DET_GPIO);
v12_short = v12_short? 0 : 1; /* Polarity reverse */
if(v12_short == 1) /* V12 short detected*/
{
/* Cut V12 Power*/
HAL_GPIO_BIT_DIR_SET(SYS_12V_GPIO, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(SYS_12V_GPIO,0);
/* Set corresponding flags*/
v12_power_short = SIGNAL_STATUS_LNBSHORT;
v12_short_cut = 1;
count = 0;
/* Set LED display */
led_display_flag = 1;
key_pan_display("12SP",4);
led_display_flag = 2;
}
else
{
RESET_V12_STATUS:
if(v12_power_short == SIGNAL_STATUS_LNBSHORT
|| led_display_flag != 0)
{
/* Restore LED display*/
led_display_flag = 1;
key_pan_display(led_display_data,led_data_len);
led_display_flag = 0;
v12_power_short = SIGNAL_STATUS_LNBNORMAL;
}
}
}
else
{
if(!v12_detect)/* User have re-set V12 */
{
v12_short_cut = 0;
goto RESET_V12_STATUS;
}
count++;
if(count >= V12_POWER_RESET_WAIT_TIME)
{
/* Restore LNB Power*/
HAL_GPIO_BIT_DIR_SET(SYS_12V_GPIO, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(SYS_12V_GPIO,v12_detect);
v12_short_cut = 0;
count = 0;
}
}
#endif
#endif
}
void power_off_process(void)
{
struct YCbCrColor bgcolor;
extern struct rfm_device* g_rfm_dev;
extern struct scart_device* g_scart_dev;
#ifdef DVR_PVR_SUPPORT
api_pvr_clear_up_all();
#endif
// SE: Mute before scart power off to avoid noise
api_audio_set_mute(TRUE);
#if defined(HW_SS830C)||defined(HW_SS830C2)
//Wirte GPIO#5 to high to avoid noise (used on SS830C)
HAL_GPIO_BIT_DIR_SET(5, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(5, 1);
#endif
api_Scart_TVSAT_Switch(0);
api_Scart_Power_OnOff(0);
api_Scart_RGB_OnOff(0);/*CVBS mode*/
#ifdef VDAC_USE_SVIDEO_TYPE
api_Svideo_OnOff(0);
#endif
api_Scart_OutPut_Switch(0);
SetLNBShortDetect(0);
Set12VShortDetect(0);
api_LNB_power(0);
#if(SYS_12V_SWITCH == SYS_FUNC_ON)
api_diseqc_set_12v(g_nim_dev, 0);
#endif
#ifdef USB_MP_SUPPORT
if(system_state == SYS_STATE_USB_MP)
{
ap_udisk_close();
}
#endif
#ifndef NEW_DEMO_FRAME
if(hde_get_mode() != VIEW_MODE_MULTI)
UIChChgStopProg(TRUE);
#endif
#if (TTX_ON == 1)
ttx_enable(FALSE);
#endif
#if (SUBTITLE_ON == 1)
subt_enable(FALSE);
#endif
sie_close();
OSD_ShowOnOff(OSDDRV_OFF);
#ifdef NEW_DEMO_FRAME
sim_close_monitor(0);
#else
si_monitor_off(0xFFFFFFFF);
#endif
stop_tdt();
epg_off();
vpo_win_onoff(g_vpo_dev, FALSE);
#ifdef DUAL_VIDEO_OUTPUT
if(g_sd_vpo_dev != NULL)
vpo_win_onoff(g_sd_vpo_dev,TRUE);
#endif
dm_set_onoff(0);
bgcolor.uY = 16;
bgcolor.uCb = 128;
bgcolor.uCr = 128;
vpo_ioctl(g_vpo_dev,VPO_IO_SET_BG_COLOR,(UINT32)&bgcolor);
//close drivers
dmx_stop( g_dmx_dev);
dmx_close( g_dmx_dev);
if (g_dmx_dev2)
{
dmx_stop(g_dmx_dev2);
dmx_close(g_dmx_dev2);
}
deca_stop(g_deca_dev,0,ADEC_STOP_IMM);
deca_close(g_deca_dev);
vdec_close(g_decv_dev);
// Power HDMI phy at standby mode.
#ifdef HDTV_SUPPORT
struct hdmi_device *hdmi_dev;
hdmi_dev = (struct hdmi_device *)dev_get_by_id(HLD_DEV_TYPE_HDMI, 0);
if (hdmi_dev != NULL)
{
if (SUCCESS != hdmi_dev->close(hdmi_dev))
{
PRINTF("hdmi_close failed!!\n");
ASSERT(0);
}
}
#endif
vpo_close(g_vpo_dev);
#ifdef DUAL_VIDEO_OUTPUT
if(RET_SUCCESS!=vpo_close((struct vpo_device *)dev_get_by_id(HLD_DEV_TYPE_DIS, 1)))
ASSERT(0);
#endif
snd_close(g_snd_dev);
nim_close(g_nim_dev);
if(g_nim_dev2)
nim_close(g_nim_dev2);
if(g_rfm_dev)
rfm_close(g_rfm_dev);
#if (SYS_MAIN_BOARD == BOARD_M3329E_DEMO01V01 || SYS_MAIN_BOARD == BOARD_DB_M3602_02V01 || SYS_MAIN_BOARD == BOARD_DB_M3602_04V01)
if(g_scart_dev)
scart_close(g_scart_dev);
#endif
led_display_flag = 0;
#if (SYS_MAIN_BOARD == BOARD_S3602_DEMO)
// Power off
HAL_GPIO_BIT_DIR_SET(25, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(25, 0);
#elif (SYS_MAIN_BOARD == BOARD_DB_M3602_02V01 || SYS_MAIN_BOARD == BOARD_DB_M3602_04V01)
// Power off
/*alfred.wu 不允许ali的power off*/
/*
HAL_GPIO_BIT_DIR_SET(61, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(61, 1);
// Tuner LNB power off
HAL_GPIO_BIT_DIR_SET(73, HAL_GPIO_O_DIR);
HAL_GPIO_BIT_SET(73, 1);
*//*end*/
#endif
}
