void Md5Final(Md5* md5, byte* hash)
{
__IO uint16_t nbvalidbitsdata = 0;
/* finish reading any trailing bytes into FIFO */
if (md5->buffLen > 0) {
HASH_DataIn(*(uint32_t*)md5->buffer);
md5->loLen += md5->buffLen;
}
/* calculate number of valid bits in last word of input data */
nbvalidbitsdata = 8 * (md5->loLen % MD5_REG_SIZE);
/* configure number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* start HASH processor */
HASH_StartDigest();
/* wait until Busy flag == RESET */
while (HASH_GetFlagStatus(HASH_FLAG_BUSY) != RESET) {}
/* read message digest */
md5->digest[0] = HASH->HR[0];
md5->digest[1] = HASH->HR[1];
md5->digest[2] = HASH->HR[2];
md5->digest[3] = HASH->HR[3];
ByteReverseWords(md5->digest, md5->digest, MD5_DIGEST_SIZE);
XMEMCPY(hash, md5->digest, MD5_DIGEST_SIZE);
InitMd5(md5); /* reset state */
}
int wc_ShaFinal(Sha* sha, byte* hash)
{
__IO uint16_t nbvalidbitsdata = 0;
/* finish reading any trailing bytes into FIFO */
if (sha->buffLen) {
HASH_DataIn(*(uint32_t*)sha->buffer);
sha->loLen += sha->buffLen;
}
/* calculate number of valid bits in last word of input data */
nbvalidbitsdata = 8 * (sha->loLen % SHA_REG_SIZE);
/* configure number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* start HASH processor */
HASH_StartDigest();
/* wait until Busy flag == RESET */
while (HASH_GetFlagStatus(HASH_FLAG_BUSY) != RESET) {}
/* read message digest */
sha->digest[0] = HASH->HR[0];
sha->digest[1] = HASH->HR[1];
sha->digest[2] = HASH->HR[2];
sha->digest[3] = HASH->HR[3];
sha->digest[4] = HASH->HR[4];
ByteReverseWords(sha->digest, sha->digest, SHA_DIGEST_SIZE);
XMEMCPY(hash, sha->digest, SHA_DIGEST_SIZE);
return wc_InitSha(sha); /* reset state */
}
/**
* @brief Compute the HASH SHA1 digest.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]) {
HASH_InitTypeDef SHA1_HASH_InitStructure;
HASH_MsgDigest SHA1_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t inputaddr = (uint32_t) Input;
uint32_t outputaddr = (uint32_t) Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1;
SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH;
SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
HASH_Init(&SHA1_HASH_InitStructure);
/* Configure the number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for (i = 0; i < Ilen; i += 4) {
HASH_DataIn(*(uint32_t*) inputaddr);
inputaddr += 4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do {
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
} while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET) {
status = ERROR;
} else {
/* Read the message digest */
HASH_GetDigest(&SHA1_MessageDigest);
*(uint32_t*) (outputaddr) = __REV(SHA1_MessageDigest.Data[0]);
outputaddr += 4;
*(uint32_t*) (outputaddr) = __REV(SHA1_MessageDigest.Data[1]);
outputaddr += 4;
*(uint32_t*) (outputaddr) = __REV(SHA1_MessageDigest.Data[2]);
outputaddr += 4;
*(uint32_t*) (outputaddr) = __REV(SHA1_MessageDigest.Data[3]);
outputaddr += 4;
*(uint32_t*) (outputaddr) = __REV(SHA1_MessageDigest.Data[4]);
}
return status;
}
/**
* @brief Compute the HMAC MD5 digest.
* @param Key: pointer to the Key used for HMAC.
* @param Keylen: length of the Key used for HMAC.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen, uint8_t *Input,
uint32_t Ilen, uint8_t Output[16])
{
HASH_InitTypeDef MD5_HASH_InitStructure;
HASH_MsgDigest MD5_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
__IO uint16_t nbvalidbitskey = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* Number of valid bits in last word of the Key */
nbvalidbitskey = 8 * (Keylen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5;
MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HMAC;
MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
if(Keylen > 64)
{
/* HMAC long Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey;
}
else
{
/* HMAC short Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey;
}
HASH_Init(&MD5_HASH_InitStructure);
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Input data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
keyaddr = (uint32_t)Key;
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&MD5_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[3]);
}
}
}
return status;
}