bool cDvbDevice::SetChannelDevice(const cChannel *Channel, bool LiveView)
{
bool DoTune = !dvbTuner->IsTunedTo(Channel);
bool TurnOffLivePIDs = HasDecoder()
&& (DoTune
|| !IsPrimaryDevice()
|| LiveView // for a new live view the old PIDs need to be turned off
|| pidHandles[ptVideo].pid == Channel->Vpid() // for recording the PIDs must be shifted from DMX_PES_AUDIO/VIDEO to DMX_PES_OTHER
);
bool StartTransferMode = IsPrimaryDevice() && !DoTune
&& (LiveView && HasPid(Channel->Vpid() ? Channel->Vpid() : Channel->Apid(0)) && (pidHandles[ptVideo].pid != Channel->Vpid() || (pidHandles[ptAudio].pid != Channel->Apid(0) && (Channel->Dpid(0) ? pidHandles[ptAudio].pid != Channel->Dpid(0) : true)))// the PID is already set as DMX_PES_OTHER
|| !LiveView && (pidHandles[ptVideo].pid == Channel->Vpid() || pidHandles[ptAudio].pid == Channel->Apid(0)) // a recording is going to shift the PIDs from DMX_PES_AUDIO/VIDEO to DMX_PES_OTHER
);
bool TurnOnLivePIDs = HasDecoder() && !StartTransferMode && LiveView;
#ifndef DO_MULTIPLE_RECORDINGS
TurnOffLivePIDs = TurnOnLivePIDs = true;
StartTransferMode = false;
#endif
// Turn off live PIDs if necessary:
if (TurnOffLivePIDs)
TurnOffLiveMode(LiveView);
// Set the tuner:
dvbTuner->Set(Channel, DoTune);
// If this channel switch was requested by the EITScanner we don't wait for
// a lock and don't set any live PIDs (the EITScanner will wait for the lock
// by itself before setting any filters):
if (EITScanner.UsesDevice(this)) //XXX
return true;
// PID settings:
if (TurnOnLivePIDs) {
SetAudioBypass(false);
if (!(AddPid(Channel->Ppid(), ptPcr) && AddPid(Channel->Vpid(), ptVideo) && AddPid(Channel->Apid(0), ptAudio))) {
esyslog("ERROR: failed to set PIDs for channel %d on device %d", Channel->Number(), CardIndex() + 1);
return false;
}
if (IsPrimaryDevice())
AddPid(Channel->Tpid(), ptTeletext);
CHECK(ioctl(fd_audio, AUDIO_SET_MUTE, true)); // actually one would expect 'false' here, but according to Marco Schlüßler <*****@*****.**> this works
// to avoid missing audio after replaying a DVD; with 'false' there is an audio disturbance when switching
// between two channels on the same transponder on DVB-S
CHECK(ioctl(fd_audio, AUDIO_SET_AV_SYNC, true));
}
else if (StartTransferMode)
cControl::Launch(new cTransferControl(this, Channel->Vpid(), Channel->Apids(), Channel->Dpids(), Channel->Spids()));
return true;
}
void cDvbDevice::SetVideoFormat(bool VideoFormat16_9)
{
if (HasDecoder()) {
CHECK(ioctl(fd_video, VIDEO_SET_FORMAT, VideoFormat16_9 ? VIDEO_FORMAT_16_9 : VIDEO_FORMAT_4_3));
SetVideoDisplayFormat(eVideoDisplayFormat(Setup.VideoDisplayFormat));
}
}
int cDvbDevice::GetAudioChannelDevice(void)
{
if (HasDecoder()) {
audio_status_t as;
CHECK(ioctl(fd_audio, AUDIO_GET_STATUS, &as));
return as.channel_select;
}
return 0;
}
void cDvbDevice::SetVolumeDevice(int Volume)
{
if (HasDecoder()) {
if (digitalAudio)
Volume = 0;
audio_mixer_t am;
// conversion for linear volume response:
am.volume_left = am.volume_right = 2 * Volume - Volume * Volume / 255;
CHECK(ioctl(fd_audio, AUDIO_SET_MIXER, &am));
}
}
void SCDEVICE::LateInit(void)
{
DEBUGLOG("%s", __FUNCTION__);
int n = CardIndex();
if (DeviceNumber() != n)
ERRORLOG("CardIndex - DeviceNumber mismatch! Put DVBAPI plugin first on VDR commandline!");
softcsa = (fd_ca < 0);
if (softcsa)
{
if (HasDecoder())
INFOLOG("Card %s is a full-featured card but no ca device found!", devId);
}
else if (cScDevices::ForceBudget(n))
{
INFOLOG("Budget mode forced on card %s", devId);
softcsa = true;
}
if (softcsa)
{
INFOLOG("Using software decryption on card %s", devId);
}
}
void cDvbDevice::SetVideoDisplayFormat(eVideoDisplayFormat VideoDisplayFormat)
{
cDevice::SetVideoDisplayFormat(VideoDisplayFormat);
if (HasDecoder()) {
if (Setup.VideoFormat) {
CHECK(ioctl(fd_video, VIDEO_SET_DISPLAY_FORMAT, VIDEO_LETTER_BOX));
}
else {
switch (VideoDisplayFormat) {
case vdfPanAndScan:
CHECK(ioctl(fd_video, VIDEO_SET_DISPLAY_FORMAT, VIDEO_PAN_SCAN));
break;
case vdfLetterBox:
CHECK(ioctl(fd_video, VIDEO_SET_DISPLAY_FORMAT, VIDEO_LETTER_BOX));
break;
case vdfCenterCutOut:
CHECK(ioctl(fd_video, VIDEO_SET_DISPLAY_FORMAT, VIDEO_CENTER_CUT_OUT));
break;
}
}
}
}
bool cScDvbSdFfDevice::CheckFullTs(void)
{
return IsPrimaryDevice() && HasDecoder();
}
void cDvbDevice::SetAudioChannelDevice(int AudioChannel)
{
if (HasDecoder())
CHECK(ioctl(fd_audio, AUDIO_CHANNEL_SELECT, AudioChannel));
}
void cDvbDevice::MakePrimaryDevice(bool On)
{
if (HasDecoder())
new cDvbOsdProvider(fd_osd);
}
cDvbDevice::cDvbDevice(int n)
{
dvbTuner = NULL;
frontendType = fe_type_t(-1); // don't know how else to initialize this - there is no FE_UNKNOWN
spuDecoder = NULL;
digitalAudio = false;
playMode = pmNone;
// Devices that are present on all card types:
int fd_frontend = DvbOpen(DEV_DVB_FRONTEND, n, O_RDWR | O_NONBLOCK);
// Devices that are only present on cards with decoders:
fd_osd = DvbOpen(DEV_DVB_OSD, n, O_RDWR);
fd_video = DvbOpen(DEV_DVB_VIDEO, n, O_RDWR | O_NONBLOCK);
fd_audio = DvbOpen(DEV_DVB_AUDIO, n, O_RDWR | O_NONBLOCK);
fd_stc = DvbOpen(DEV_DVB_DEMUX, n, O_RDWR);
// The DVR device (will be opened and closed as needed):
fd_dvr = -1;
// The offset of the /dev/video devices:
if (devVideoOffset < 0) { // the first one checks this
FILE *f = NULL;
char buffer[PATH_MAX];
for (int ofs = 0; ofs < 100; ofs++) {
snprintf(buffer, sizeof(buffer), "/proc/video/dev/video%d", ofs);
if ((f = fopen(buffer, "r")) != NULL) {
if (fgets(buffer, sizeof(buffer), f)) {
if (strstr(buffer, "DVB Board")) { // found the _first_ DVB card
devVideoOffset = ofs;
dsyslog("video device offset is %d", devVideoOffset);
break;
}
}
else
break;
fclose(f);
}
else
break;
}
if (devVideoOffset < 0)
devVideoOffset = 0;
if (f)
fclose(f);
}
devVideoIndex = (devVideoOffset >= 0 && HasDecoder()) ? devVideoOffset++ : -1;
// Video format:
SetVideoFormat(Setup.VideoFormat);
// We only check the devices that must be present - the others will be checked before accessing them://XXX
if (fd_frontend >= 0) {
dvb_frontend_info feinfo;
if (ioctl(fd_frontend, FE_GET_INFO, &feinfo) >= 0) {
frontendType = feinfo.type;
ciHandler = cCiHandler::CreateCiHandler(*cDvbName(DEV_DVB_CA, n));
dvbTuner = new cDvbTuner(fd_frontend, CardIndex(), frontendType, ciHandler);
}
else
LOG_ERROR;
}
else
esyslog("ERROR: can't open DVB device %d", n);
StartSectionHandler();
}
