int main()
{
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_DEB_Start(); /* Start communication component */
printf("BLE Heart Rate Sensor Example Project \r\n");
Disconnect_LED_Write(LED_OFF);
Advertising_LED_Write(LED_OFF);
/* Start CYBLE component and register generic event handler */
apiResult = CyBle_Start(AppCallBack);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_Start API Error: %x \r\n", apiResult);
}
apiResult = CyBle_GetStackLibraryVersion(&stackVersion);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_GetStackLibraryVersion API Error: 0x%x \r\n", apiResult);
}
else
{
printf("Stack Version: %d.%d.%d.%d \r\n", stackVersion.majorVersion,
stackVersion.minorVersion, stackVersion.patch, stackVersion.buildNumber);
}
/* Services initialization */
HrsInit();
WDT_Start();
/***************************************************************************
* Main polling loop
***************************************************************************/
while(1)
{
/***********************************************************************
* Wait for connection established with Central device
***********************************************************************/
if(CyBle_GetState() == CYBLE_STATE_CONNECTED)
{
/*******************************************************************
* Periodically simulate heart rate and measure a battery level
* and send results to the Client
*******************************************************************/
if(mainTimer != 0u)
{
mainTimer = 0u;
if(heartRateSimulation == ENABLED)
{
SimulateHeartRate();
}
}
}
/*******************************************************************
* Process all pending BLE events in the stack
*******************************************************************/
CyBle_ProcessEvents();
}
}
int main()
{
CYBLE_LP_MODE_T lpMode;
CYBLE_BLESS_STATE_T blessState;
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_DEB_Start(); /* Start communication component */
printf("BLE Heart Rate Collector Example Project \r\n");
Disconnect_LED_Write(LED_OFF);
Scanning_LED_Write(LED_OFF);
Notification_LED_Write(LED_OFF);
apiResult = CyBle_Start(AppCallBack);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_Start API Error: 0x%x \r\n", apiResult);
}
apiResult = CyBle_GetStackLibraryVersion(&stackVersion);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_GetStackLibraryVersion API Error: 0x%x \r\n", apiResult);
}
else
{
printf("Stack Version: %d.%d.%d.%d \r\n", stackVersion.majorVersion,
stackVersion.minorVersion, stackVersion.patch, stackVersion.buildNumber);
}
CyBle_BasRegisterAttrCallback(BasCallBack);
HrsInit();
while(1)
{
if(CyBle_GetState() != CYBLE_STATE_INITIALIZING)
{
/* Enter DeepSleep mode between connection intervals */
lpMode = CyBle_EnterLPM(CYBLE_BLESS_DEEPSLEEP);
CyGlobalIntDisable;
blessState = CyBle_GetBleSsState();
if(lpMode == CYBLE_BLESS_DEEPSLEEP)
{
if(blessState == CYBLE_BLESS_STATE_ECO_ON || blessState == CYBLE_BLESS_STATE_DEEPSLEEP)
{
/* Put the device into the DeepSleep mode only when all debug information has been sent */
if((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u)
{
CySysPmDeepSleep();
}
else
{
CySysPmSleep();
}
}
}
else
{
if(blessState != CYBLE_BLESS_STATE_EVENT_CLOSE)
{
CySysPmSleep();
}
}
CyGlobalIntEnable;
/* Handle advertising led blinking */
HandleLeds();
}
/* Store bonding data to flash only when all debug information has been sent */
if((cyBle_pendingFlashWrite != 0u) &&
((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u))
{
apiResult = CyBle_StoreBondingData(0u);
printf("Store bonding data, status: %x \r\n", apiResult);
}
/*******************************************************************
* Processes all pending BLE events in the stack
*******************************************************************/
CyBle_ProcessEvents();
}
}
int main()
{
CYBLE_LP_MODE_T lpMode;
CYBLE_BLESS_STATE_T blessState;
CyGlobalIntEnable;
UART_DEB_Start(); /* Start communication component */
printf("BLE Secure Connection Example Project \r\n");
Disconnect_LED_Write(LED_OFF);
Advertising_LED_Write(LED_OFF);
/* Start CYBLE component and register generic event handler */
apiResult = CyBle_Start(AppCallBack);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_Start API Error: %x \r\n", apiResult);
}
/* Services initialization */
HrsInit();
/***************************************************************************
* Main polling loop
***************************************************************************/
while(1)
{
if(CyBle_GetState() != CYBLE_STATE_INITIALIZING)
{
/* Enter DeepSleep mode between connection intervals */
lpMode = CyBle_EnterLPM(CYBLE_BLESS_DEEPSLEEP);
CyGlobalIntDisable;
blessState = CyBle_GetBleSsState();
if(lpMode == CYBLE_BLESS_DEEPSLEEP)
{
if(blessState == CYBLE_BLESS_STATE_ECO_ON || blessState == CYBLE_BLESS_STATE_DEEPSLEEP)
{
/* Put the device into the Deep Sleep mode only when all debug information has been sent */
if((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u)
{
CySysPmDeepSleep();
}
else
{
CySysPmSleep();
}
}
}
else
{
if(blessState != CYBLE_BLESS_STATE_EVENT_CLOSE)
{
CySysPmSleep();
}
}
CyGlobalIntEnable;
}
/***********************************************************************
* Wait for connection established with Central device
***********************************************************************/
if(CyBle_GetState() == CYBLE_STATE_CONNECTED)
{
/*******************************************************************
* Periodically simulates heart beat and sends the results to the Client
*******************************************************************/
mainTimer++;
if(mainTimer == MAIN_LOOP_SIMULATION_THRESHOLD)
{
mainTimer = 0u;
if(heartRateSimulation == ENABLED)
{
SimulateHeartRate();
CyBle_ProcessEvents();
}
}
else if((cyBle_pendingFlashWrite != 0u) &&
((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u))
{
apiResult = CyBle_StoreBondingData(0u);
printf("Store bonding data, status: %x \r\n", apiResult);
}
else
{
/* nothing else */
}
}
/*******************************************************************
* Process all pending BLE events in the stack
*******************************************************************/
CyBle_ProcessEvents();
}
}
