void
if_print(FILE *file, void * data)
{
tracked_if_t *tip = data;
interface_t *ifp = tip->ifp;
char addr_str[41];
int weight = tip->weight;
fprintf(file, "------< NIC >------\n");
fprintf(file, " Name = %s\n", ifp->ifname);
fprintf(file, " index = %d\n", ifp->ifindex);
fprintf(file, " IPv4 address = %s\n",
inet_ntop2(ifp->sin_addr.s_addr));
inet_ntop(AF_INET6, &ifp->sin6_addr, addr_str, 41);
fprintf(file, " IPv6 address = %s\n", addr_str);
/* FIXME: Harcoded for ethernet */
if (ifp->hw_type == ARPHRD_ETHER)
fprintf(file, " MAC = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
ifp->hw_addr[0], ifp->hw_addr[1], ifp->hw_addr[2]
, ifp->hw_addr[3], ifp->hw_addr[4], ifp->hw_addr[5]);
if (ifp->flags & IFF_UP)
fprintf(file, " is UP\n");
if (ifp->flags & IFF_RUNNING)
fprintf(file, " is RUNNING\n");
if (!(ifp->flags & IFF_UP) && !(ifp->flags & IFF_RUNNING))
fprintf(file, " is DOWN\n");
if (weight)
fprintf(file, " weight = %d\n", weight);
fprintf(file, " MTU = %d\n", ifp->mtu);
switch (ifp->hw_type) {
case ARPHRD_LOOPBACK:
fprintf(file, " HW Type = LOOPBACK\n");
break;
case ARPHRD_ETHER:
fprintf(file, " HW Type = ETHERNET\n");
break;
default:
fprintf(file, " HW Type = UNKNOWN\n");
break;
}
/* MII channel supported ? */
if (IF_MII_SUPPORTED(ifp))
fprintf(file, " NIC support MII regs\n");
else if (IF_ETHTOOL_SUPPORTED(ifp))
fprintf(file, " NIC support EHTTOOL GLINK interface\n");
else
fprintf(file, " Enabling NIC ioctl refresh polling\n");
}
int
if_linkbeat(const interface_t * ifp)
{
if (!global_data->linkbeat_use_polling)
return 1;
if (IF_MII_SUPPORTED(ifp) || IF_ETHTOOL_SUPPORTED(ifp))
return IF_LINKBEAT(ifp);
return 1;
}
void
dump_if(void *data)
{
interface_t *ifp = data;
char addr_str[41];
log_message(LOG_INFO, "------< NIC >------");
log_message(LOG_INFO, " Name = %s", ifp->ifname);
log_message(LOG_INFO, " index = %d", ifp->ifindex);
log_message(LOG_INFO, " IPv4 address = %s", inet_ntop2(ifp->sin_addr.s_addr));
inet_ntop(AF_INET6, &ifp->sin6_addr, addr_str, 41);
log_message(LOG_INFO, " IPv6 address = %s", addr_str);
/* FIXME: Harcoded for ethernet */
if (ifp->hw_type == ARPHRD_ETHER)
log_message(LOG_INFO, " MAC = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x",
ifp->hw_addr[0], ifp->hw_addr[1], ifp->hw_addr[2]
, ifp->hw_addr[3], ifp->hw_addr[4], ifp->hw_addr[5]);
if (ifp->flags & IFF_UP)
log_message(LOG_INFO, " is UP");
if (ifp->flags & IFF_RUNNING)
log_message(LOG_INFO, " is RUNNING");
if (!(ifp->flags & IFF_UP) && !(ifp->flags & IFF_RUNNING))
log_message(LOG_INFO, " is DOWN");
log_message(LOG_INFO, " MTU = %d", ifp->mtu);
switch (ifp->hw_type) {
case ARPHRD_LOOPBACK:
log_message(LOG_INFO, " HW Type = LOOPBACK");
break;
case ARPHRD_ETHER:
log_message(LOG_INFO, " HW Type = ETHERNET");
break;
default:
log_message(LOG_INFO, " HW Type = UNKNOWN");
break;
}
/* MII channel supported ? */
if (IF_MII_SUPPORTED(ifp))
log_message(LOG_INFO, " NIC support MII regs");
else if (IF_ETHTOOL_SUPPORTED(ifp))
log_message(LOG_INFO, " NIC support EHTTOOL GLINK interface");
else
log_message(LOG_INFO, " Enabling NIC ioctl refresh polling");
}
static int
if_linkbeat_refresh_thread(thread_t * thread)
{
interface_t *ifp = THREAD_ARG(thread);
if (IF_MII_SUPPORTED(ifp))
ifp->linkbeat = (if_mii_probe(ifp->ifname)) ? 1 : 0;
else if (IF_ETHTOOL_SUPPORTED(ifp))
ifp->linkbeat = (if_ethtool_probe(ifp->ifname)) ? 1 : 0;
else
ifp->linkbeat = 1;
/*
* update ifp->flags to get the new IFF_RUNNING status.
* Some buggy drivers need this...
*/
if_ioctl_flags(ifp);
/* Register next polling thread */
thread_add_timer(master, if_linkbeat_refresh_thread, ifp, POLLING_DELAY);
return 0;
}
static void
dump_if(void *data)
{
interface_t *ifp = data;
#ifdef _HAVE_VRRP_VMAC_
interface_t *ifp_u;
#endif
char addr_str[INET6_ADDRSTRLEN];
log_message(LOG_INFO, "------< NIC >------");
log_message(LOG_INFO, " Name = %s", ifp->ifname);
log_message(LOG_INFO, " index = %d", ifp->ifindex);
log_message(LOG_INFO, " IPv4 address = %s", inet_ntop2(ifp->sin_addr.s_addr));
inet_ntop(AF_INET6, &ifp->sin6_addr, addr_str, sizeof(addr_str));
log_message(LOG_INFO, " IPv6 address = %s", addr_str);
/* FIXME: Hardcoded for ethernet */
if (ifp->hw_type == ARPHRD_ETHER)
log_message(LOG_INFO, " MAC = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x",
ifp->hw_addr[0], ifp->hw_addr[1], ifp->hw_addr[2]
, ifp->hw_addr[3], ifp->hw_addr[4], ifp->hw_addr[5]);
if (ifp->flags & IFF_UP)
log_message(LOG_INFO, " is UP");
if (ifp->flags & IFF_RUNNING)
log_message(LOG_INFO, " is RUNNING");
if (!(ifp->flags & IFF_UP) && !(ifp->flags & IFF_RUNNING))
log_message(LOG_INFO, " is DOWN");
log_message(LOG_INFO, " MTU = %d", ifp->mtu);
switch (ifp->hw_type) {
case ARPHRD_LOOPBACK:
log_message(LOG_INFO, " HW Type = LOOPBACK");
break;
case ARPHRD_ETHER:
log_message(LOG_INFO, " HW Type = ETHERNET");
break;
default:
log_message(LOG_INFO, " HW Type = UNKNOWN");
break;
}
#ifdef _HAVE_VRRP_VMAC_
if (ifp->vmac && (ifp_u = if_get_by_ifindex(ifp->base_ifindex)))
log_message(LOG_INFO, " VMAC underlying interface = %s", ifp_u->ifname);
#endif
/* MII channel supported ? */
if (IF_MII_SUPPORTED(ifp))
log_message(LOG_INFO, " NIC support MII regs");
else if (IF_ETHTOOL_SUPPORTED(ifp))
log_message(LOG_INFO, " NIC support EHTTOOL GLINK interface");
else
log_message(LOG_INFO, " Enabling NIC ioctl refresh polling");
if (ifp->garp_delay) {
if (ifp->garp_delay->have_garp_interval)
log_message(LOG_INFO, " Gratuitous ARP interval %ldms",
ifp->garp_delay->garp_interval.tv_sec * 100 +
ifp->garp_delay->garp_interval.tv_usec / (TIMER_HZ / 100));
if (ifp->garp_delay->have_gna_interval)
log_message(LOG_INFO, " Gratuitous NA interval %ldms",
ifp->garp_delay->gna_interval.tv_sec * 100 +
ifp->garp_delay->gna_interval.tv_usec / (TIMER_HZ / 100));
if (ifp->garp_delay->aggregation_group)
log_message(LOG_INFO, " Gratuitous ARP aggregation group %d", ifp->garp_delay->aggregation_group);
}
}
