/**
* @brief Configures the ADCx external trigger for injected channels conversion.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion.
* This parameter can be one of the following values:
* @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
* @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
* @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
* @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
* @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
* @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
* @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8
* capture compare4 event selected (for ADC1 and ADC2)
* @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
* @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
* @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
* @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
* @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
* @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not
* by external trigger (for ADC1, ADC2 and ADC3)
* @retval None
*/
void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_ADC_ALL_PERIPH(ADCx));
assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
/* Get the old register value */
tmpreg = ADCx->CR2;
/* Clear the old external event selection for injected group */
tmpreg &= CR2_JEXTSEL_Reset;
/* Set the external event selection for injected group */
tmpreg |= ADC_ExternalTrigInjecConv;
/* Store the new register value */
ADCx->CR2 = tmpreg;
}
/*******************************************************************************
* 函数名称: ADC_ExternalTrigInjectedConvConfig
* 功能描述: 为注入信道转换配置ADCx外部触发
* 输入参数: (1)ADCx:其中x可以是1、2或3，用来选择ADC外围模块.
* (2)ADC_ExternalTrigInjecConv:开始注入转换的ADC触发器
* ADC_ExternalTrigInjecConv 取值:
* - ADC_ExternalTrigInjecConv_T1_TRGO: 定时器1TRGO事件作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_T1_CC4: 定时器1捕获比较4作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_T2_TRGO: 定时器2TRGO事件作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_External TrigInjecConv_T2_CC1: 定时器2捕获比较1作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_T3_CC4: 定时器3捕获比较4作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_T4_TRGO: 定时器4TRGO事件作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: 外部中断15或者timer8比较事件作为注入转换(ADC1,ADC2,ADC3)的外部触发器
* - ADC_External TrigInjecConv_T4_CC3: timer4比较3事件作为注入转换(只ADC3)的外部触发器
* - ADC_External TrigInjecConv_T8_CC2: timer8比较2事件作为注入转换(只ADC3)的外部触发器
* - ADC_External TrigInjecConv_T8_CC4: timer8比较4事件作为注入转换(只ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_T5_TRGO: 定时器5 TRGO 事件作为注入转换(只ADC3)的外部触发器
* - ADC_External TrigInjecConv_T5_CC4: timer5比较4事件作为注入转换(只ADC3)的外部触发器
* - ADC_ExternalTrigInjecConv_无: 注入转换由软件启动，而不是由外部触发器启动
* 输出参数: 无
* 返回参数: 无
*******************************************************************************/
void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv)
{
u32 tmpreg = 0;
/* Check the parameters [检查参数] */
assert_param(IS_ADC_ALL_PERIPH(ADCx));
assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
/* Get the old register value [取得旧的寄存器值]*/
tmpreg = ADCx->CR2;
/* Clear the old external event selection for injected group [清除选择的注入通道群的外部触发事件]*/
tmpreg &= CR2_JEXTSEL_Reset;
/* Set the external event selection for injected group [置位选择的注入通道群的外部触发事件]*/
tmpreg |= ADC_ExternalTrigInjecConv;
/* Store the new register value [存储新的寄存器值]*/
ADCx->CR2 = tmpreg;
}
/**
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param sConfigInjected: ADC configuration structure for injected channel.
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
{
#ifdef USE_FULL_ASSERT
uint32_t tmp = 0;
#endif /* USE_FULL_ASSERT */
/* Check the parameters */
assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
#ifdef USE_FULL_ASSERT
tmp = ADC_GET_RESOLUTION(hadc);
assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
#endif /* USE_FULL_ASSERT */
if(sConfigInjected->ExternalTrigInjecConvEdge != ADC_INJECTED_SOFTWARE_START)
{
assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
}
/* Process locked */
__HAL_LOCK(hadc);
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
{
/* Clear the old sample time */
hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
else /* ADC_Channel include in ADC_Channel_[0..9] */
{
/* Clear the old sample time */
hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
/*---------------------------- ADCx JSQR Configuration -----------------*/
hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
hadc->Instance->JSQR |= ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
/* Rank configuration */
/* Clear the old SQx bits for the selected rank */
hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Set the SQx bits for the selected rank */
hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Enable external trigger if trigger selection is different of software */
/* start. */
/* Note: This configuration keeps the hardware feature of parameter */
/* ExternalTrigConvEdge "trigger edge none" equivalent to */
/* software start. */
if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
{
/* Select external trigger to start conversion */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv;
/* Select external trigger polarity */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
}
else
{
/* Reset the external trigger */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
}
if (sConfigInjected->AutoInjectedConv != DISABLE)
{
/* Enable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 |= ADC_CR1_JAUTO;
}
else
{
/* Disable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
}
if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
{
/* Enable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
}
else
{
/* Disable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
}
switch(sConfigInjected->InjectedRank)
{
case 1:
/* Set injected channel 1 offset */
hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
break;
case 2:
/* Set injected channel 2 offset */
hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
break;
case 3:
/* Set injected channel 3 offset */
hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
break;
default:
/* Set injected channel 4 offset */
hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
break;
}
/* if ADC1 Channel_18 is selected enable VBAT Channel */
if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
{
/* Enable the VBAT channel*/
ADC->CCR |= ADC_CCR_VBATE;
}
/* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
{
/* Enable the TSVREFE channel*/
ADC->CCR |= ADC_CCR_TSVREFE;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
