///
/// Build the PDF using the Cleo histogram for kD, dD.
/// \param fName file name of the histogram, needs to contain the likelihood (not chi2),
/// computed by ExpNll/computeCleoPdf.C
/// \param scale A scale factor that is applied to the histogram in order to get a chi2
/// of exactly 0 when this PDF is fit to minimum. This can be obtained by, e.g.,
/// bin/gammacombo -i --addpdf 8:8 --var kD_k3pi. The scale factor is then the
/// the observed FCN value at minimum.
/// \param kDobs kD value of the maximum in the histogram
/// \param dDobs dD value of the maximum in the histogram
///
void PDF_Dmixing_CLEO2D::buildPdfHistogram(TString fName, float scale, float kDobs, float dDobs)
{
RooMsgService::instance().setGlobalKillBelow(WARNING);
TString hName = "hPdf";
obsValSource += ", "+fName;
obsErrSource += ", "+fName;
corSource += ", "+fName;
if ( !FileExists(fName) ) {
cout << "PDF_Dmixing_CLEO2D::buildPdfHistogram() : ERROR : File not found : " << fName << endl;
exit(1);
}
TFile *fExpNll = new TFile(fName, "ro");
TH2D *hExpNll = (TH2D*)fExpNll->Get(hName);
assert(hExpNll);
// Scale the histogram so that the best fit value gives chi2=0. The value is obtained by fitting
// the histogram PDF to its maximum. There is some hidden scaling that I don't understand in RooHistPdf
// or so, so one can't just use the maximum value of the histogram.
hExpNll->Scale(1./TMath::Exp(scale/(-2.)));
RooRealVar *x_hist = new RooRealVar("x_k3pi_hist", "x_k3pi_hist", 0, -1e4, 1e4);
RooRealVar *y_hist = new RooRealVar("y_k3pi_hist", "y_k3pi_hist", 0, -1e4, 1e4);
RooDataHist *dhExpNll = new RooDataHist("dh_k3pi", "dh_k3pi", RooArgList(*x_hist,*y_hist), Import(*hExpNll));
RooRealVar *kD_k3pi_obs = (RooRealVar*)observables->find("kD_k3pi_obs");
RooRealVar *kD_k3pi = (RooRealVar*)theory->find("kD_k3pi_th");
RooRealVar *dD_k3pi_obs = (RooRealVar*)observables->find("dD_k3pi_obs");
RooRealVar *dD_k3pi = (RooRealVar*)theory->find("dD_k3pi_th");
RooHistPdfVar *kD_pdf = new RooHistPdfVar("kD_k3pi_pdf", "kD_k3pi_pdf", *kD_k3pi_obs, *kD_k3pi, RooConst(kDobs));
RooHistPdfAngleVar *dD_pdf = new RooHistPdfAngleVar("dD_k3pi_pdf", "dD_k3pi_pdf", *dD_k3pi_obs, *dD_k3pi, RooConst(dDobs));
pdf = new RooHistPdf("pdf_"+name, "pdf_"+name, RooArgList(*kD_pdf,*dD_pdf), RooArgList(*x_hist,*y_hist), *dhExpNll, 2);
// cleanup
fExpNll->Close();
RooMsgService::instance().setGlobalKillBelow(INFO);
addToTrash(x_hist);
addToTrash(y_hist);
addToTrash(dhExpNll);
addToTrash(kD_pdf);
addToTrash(dD_pdf);
}
bool fitCharmoniaMassModel( RooWorkspace& myws, // Local Workspace
const RooWorkspace& inputWorkspace, // Workspace with all the input RooDatasets
struct KinCuts& cut, // Variable containing all kinematic cuts
map<string, string>& parIni, // Variable containing all initial parameters
struct InputOpt& opt, // Variable with run information (kept for legacy purpose)
string outputDir, // Path to output directory
// Select the type of datasets to fit
string DSTAG, // Specifies the type of datasets: i.e, DATA, MCJPSINP, ...
bool isPbPb = false, // isPbPb = false for pp, true for PbPb
bool importDS = true, // Select if the dataset is imported in the local workspace
// Select the type of object to fit
bool incJpsi = true, // Includes Jpsi model
bool incPsi2S = true, // Includes Psi(2S) model
bool incBkg = true, // Includes Background model
// Select the fitting options
bool doFit = true, // Flag to indicate if we want to perform the fit
bool cutCtau = false, // Apply prompt ctau cuts
bool doConstrFit = false, // Do constrained fit
bool doSimulFit = false, // Do simultaneous fit
bool wantPureSMC = false, // Flag to indicate if we want to fit pure signal MC
const char* applyCorr ="", // Flag to indicate if we want corrected dataset and which correction
uint loadFitResult = false, // Load previous fit results
string inputFitDir = "", // Location of the fit results
int numCores = 2, // Number of cores used for fitting
// Select the drawing options
bool setLogScale = true, // Draw plot with log scale
bool incSS = false, // Include Same Sign data
bool zoomPsi = false, // Zoom Psi(2S) peak on extra pad
double binWidth = 0.05, // Bin width used for plotting
bool getMeanPT = false // Compute the mean PT (NEED TO FIX)
)
{
if (DSTAG.find("_")!=std::string::npos) DSTAG.erase(DSTAG.find("_"));
// Check if input dataset is MC
bool isMC = false;
if (DSTAG.find("MC")!=std::string::npos) {
if (incJpsi && incPsi2S) {
cout << "[ERROR] We can only fit one type of signal using MC" << endl; return false;
}
isMC = true;
}
wantPureSMC = (isMC && wantPureSMC);
bool cutSideBand = (incBkg && (!incPsi2S && !incJpsi));
bool applyWeight_Corr = ( strcmp(applyCorr,"") );
// Define the mass range
setMassCutParameters(cut, incJpsi, incPsi2S, isMC);
parIni["invMassNorm"] = Form("RooFormulaVar::%s('( -1.0 + 2.0*( @0 - @1 )/( @2 - @1) )', {%s, mMin[%.6f], mMax[%.6f]})", "invMassNorm", "invMass", cut.dMuon.M.Min, cut.dMuon.M.Max );
// Apply the ctau cuts to reject non-prompt charmonia
if (cutCtau) { setCtauCuts(cut, isPbPb); }
string COLL = (isPbPb ? "PbPb" : "PP" );
string plotLabelPbPb, plotLabelPP;
if (doSimulFit || !isPbPb) {
// Set models based on initial parameters
struct OniaModel model;
if (!setMassModel(model, parIni, false, incJpsi, incPsi2S, incBkg)) { return false; }
// Import the local datasets
double numEntries = 1000000;
string label = ((DSTAG.find("PP")!=std::string::npos) ? DSTAG.c_str() : Form("%s_%s", DSTAG.c_str(), "PP"));
if (wantPureSMC) label += "_NoBkg";
if (applyWeight_Corr) label += Form("_%s",applyCorr);
string dsName = Form("dOS_%s", label.c_str());
if (importDS) {
if ( !(myws.data(dsName.c_str())) ) {
int importID = importDataset(myws, inputWorkspace, cut, label, cutSideBand);
if (importID<0) { return false; }
else if (importID==0) { doFit = false; }
}
numEntries = myws.data(dsName.c_str())->sumEntries(); if (numEntries<=0) { doFit = false; }
}
else if (doFit && !(myws.data(dsName.c_str()))) { cout << "[ERROR] No local dataset was found to perform the fit!" << endl; return false; }
if (myws.data(dsName.c_str())) numEntries = myws.data(dsName.c_str())->sumEntries();
// Set global parameters
setMassGlobalParameterRange(myws, parIni, cut, incJpsi, incPsi2S, incBkg, wantPureSMC);
// Build the Fit Model
if (!buildCharmoniaMassModel(myws, model.PP, parIni, false, doConstrFit, doSimulFit, incBkg, incJpsi, incPsi2S, numEntries)) { return false; }
// Define plot names
if (incJpsi) { plotLabelPP += Form("_Jpsi_%s", parIni["Model_Jpsi_PP"].c_str()); }
if (incPsi2S) { plotLabelPP += Form("_Psi2S_%s", parIni["Model_Psi2S_PP"].c_str()); }
if (incBkg) { plotLabelPP += Form("_Bkg_%s", parIni["Model_Bkg_PP"].c_str()); }
if (wantPureSMC) plotLabelPP +="_NoBkg";
if (applyWeight_Corr) plotLabelPP +=Form("_%s",applyCorr);
}
if (doSimulFit || isPbPb) {
// Set models based on initial parameters
struct OniaModel model;
if (!setMassModel(model, parIni, true, incJpsi, incPsi2S, incBkg)) { return false; }
// Import the local datasets
double numEntries = 1000000;
string label = ((DSTAG.find("PbPb")!=std::string::npos) ? DSTAG.c_str() : Form("%s_%s", DSTAG.c_str(), "PbPb"));
if (wantPureSMC) label += "_NoBkg";
if (applyWeight_Corr) label += Form("_%s",applyCorr);
string dsName = Form("dOS_%s", label.c_str());
if (importDS) {
if ( !(myws.data(dsName.c_str())) ) {
int importID = importDataset(myws, inputWorkspace, cut, label, cutSideBand);
if (importID<0) { return false; }
else if (importID==0) { doFit = false; }
}
numEntries = myws.data(dsName.c_str())->sumEntries(); if (numEntries<=0) { doFit = false; }
}
else if (doFit && !(myws.data(dsName.c_str()))) { cout << "[ERROR] No local dataset was found to perform the fit!" << endl; return false; }
if (myws.data(dsName.c_str())) numEntries = myws.data(dsName.c_str())->sumEntries();
// Set global parameters
setMassGlobalParameterRange(myws, parIni, cut, incJpsi, incPsi2S, incBkg, wantPureSMC);
// Build the Fit Model
if (!buildCharmoniaMassModel(myws, model.PbPb, parIni, true, doConstrFit, doSimulFit, incBkg, incJpsi, incPsi2S, numEntries)) { return false; }
// Define plot names
if (incJpsi) { plotLabelPbPb += Form("_Jpsi_%s", parIni["Model_Jpsi_PbPb"].c_str()); }
if (incPsi2S) { plotLabelPbPb += Form("_Psi2S_%s", parIni["Model_Psi2S_PbPb"].c_str()); }
if (incBkg) { plotLabelPbPb += Form("_Bkg_%s", parIni["Model_Bkg_PbPb"].c_str()); }
if (wantPureSMC) plotLabelPbPb += "_NoBkg";
if (applyWeight_Corr) plotLabelPbPb += Form("_%s",applyCorr);
}
if (doSimulFit) {
// Create the combided datasets
RooCategory* sample = new RooCategory("sample","sample"); sample->defineType("PbPb"); sample->defineType("PP");
RooDataSet* combData = new RooDataSet("combData","combined data", *myws.var("invMass"), Index(*sample),
Import("PbPb", *((RooDataSet*)myws.data("dOS_DATA_PbPb"))),
Import("PP", *((RooDataSet*)myws.data("dOS_DATA_PP")))
);
myws.import(*sample);
// Create the combided models
RooSimultaneous* simPdf = new RooSimultaneous("simPdf", "simultaneous pdf", *sample);
simPdf->addPdf(*myws.pdf("pdfMASS_Tot_PbPb"), "PbPb"); simPdf->addPdf(*myws.pdf("pdfMASS_Tot_PP"), "PP");
myws.import(*simPdf);
// check if we have already done this fit. If yes, do nothing and return true.
string FileName = "";
setMassFileName(FileName, (inputFitDir=="" ? outputDir : inputFitDir), DSTAG, (plotLabelPP + plotLabelPbPb), cut, isPbPb, cutSideBand, doSimulFit);
if (gSystem->AccessPathName(FileName.c_str()) && inputFitDir!="") {
cout << "[WARNING] User Input File : " << FileName << " was not found!" << endl;
if (loadFitResult) return false;
setMassFileName(FileName, outputDir, DSTAG, (plotLabelPP + plotLabelPbPb), cut, isPbPb, cutSideBand, doSimulFit);
}
bool found = true; bool skipFit = !doFit;
RooArgSet *newpars = myws.pdf("simPdf")->getParameters(*(myws.var("invMass")));
myws.saveSnapshot("simPdf_parIni", *newpars, kTRUE);
found = found && isFitAlreadyFound(newpars, FileName, "simPdf");
if (loadFitResult) {
if ( loadPreviousFitResult(myws, FileName, DSTAG, false, (!isMC && !cutSideBand && loadFitResult==1), loadFitResult==1) ) { skipFit = true; } else { skipFit = false; }
if ( loadPreviousFitResult(myws, FileName, DSTAG, true, (!isMC && !cutSideBand && loadFitResult==1), loadFitResult==1) ) { skipFit = true; } else { skipFit = false; }
if (skipFit) { cout << "[INFO] This simultaneous mass fit was already done, so I'll load the fit results." << endl; }
myws.saveSnapshot("simPdf_parLoad", *newpars, kTRUE);
} else if (found) {
cout << "[INFO] This simultaneous mass fit was already done, so I'll just go to the next one." << endl;
return true;
}
// Do the simultaneous fit
if (skipFit==false) {
RooFitResult* fitResult = simPdf->fitTo(*combData, Offset(kTRUE), Extended(kTRUE), NumCPU(numCores), Range("MassWindow"), Save()); //, Minimizer("Minuit2","Migrad")
fitResult->Print("v");
myws.import(*fitResult, "fitResult_simPdf");
// Create the output files
int nBins = min(int( round((cut.dMuon.M.Max - cut.dMuon.M.Min)/binWidth) ), 1000);
drawMassPlot(myws, outputDir, opt, cut, parIni, plotLabelPP, DSTAG, false, incJpsi, incPsi2S, incBkg, cutCtau, doSimulFit, false, setLogScale, incSS, zoomPsi, nBins, getMeanPT);
drawMassPlot(myws, outputDir, opt, cut, parIni, plotLabelPbPb, DSTAG, true, incJpsi, incPsi2S, incBkg, cutCtau, doSimulFit, false, setLogScale, incSS, zoomPsi, nBins, getMeanPT);
// Save the results
string FileName = ""; setMassFileName(FileName, outputDir, DSTAG, (plotLabelPP + plotLabelPbPb), cut, isPbPb, cutSideBand, doSimulFit);
myws.saveSnapshot("simPdf_parFit", *newpars, kTRUE);
saveWorkSpace(myws, Form("%smass%s/%s/result", outputDir.c_str(), (cutSideBand?"SB":""), DSTAG.c_str()), FileName);
// Delete the objects used during the simultaneous fit
delete sample; delete combData; delete simPdf;
}
}
else {
// Define pdf and plot names
string pdfName = Form("pdfMASS_Tot_%s", COLL.c_str());
string plotLabel = (isPbPb ? plotLabelPbPb : plotLabelPP);
// Import the local datasets
string label = ((DSTAG.find(COLL.c_str())!=std::string::npos) ? DSTAG.c_str() : Form("%s_%s", DSTAG.c_str(), COLL.c_str()));
if (wantPureSMC) label += "_NoBkg";
if (applyWeight_Corr) label += Form("_%s",applyCorr);
string dsName = Form("dOS_%s", label.c_str());
// check if we have already done this fit. If yes, do nothing and return true.
string FileName = "";
setMassFileName(FileName, (inputFitDir=="" ? outputDir : inputFitDir), DSTAG, plotLabel, cut, isPbPb, cutSideBand);
if (gSystem->AccessPathName(FileName.c_str()) && inputFitDir!="") {
cout << "[WARNING] User Input File : " << FileName << " was not found!" << endl;
if (loadFitResult) return false;
setMassFileName(FileName, outputDir, DSTAG, plotLabel, cut, isPbPb, cutSideBand);
}
bool found = true; bool skipFit = !doFit;
RooArgSet *newpars = myws.pdf(pdfName.c_str())->getParameters(*(myws.var("invMass")));
found = found && isFitAlreadyFound(newpars, FileName, pdfName.c_str());
if (loadFitResult) {
if ( loadPreviousFitResult(myws, FileName, DSTAG, isPbPb, (!isMC && !cutSideBand && loadFitResult==1), loadFitResult==1) ) { skipFit = true; } else { skipFit = false; }
if (skipFit) { cout << "[INFO] This mass fit was already done, so I'll load the fit results." << endl; }
myws.saveSnapshot(Form("%s_parLoad", pdfName.c_str()), *newpars, kTRUE);
} else if (found) {
cout << "[INFO] This mass fit was already done, so I'll just go to the next one." << endl;
return true;
}
// Fit the Datasets
if (skipFit==false) {
bool isWeighted = myws.data(dsName.c_str())->isWeighted();
RooFitResult* fitResult(0x0);
if (doConstrFit)
{
cout << "[INFO] Performing constrained fit" << endl;
if (isPbPb) {
cout << "[INFO] Constrained variables: alpha, n, ratio of sigmas" << endl;
fitResult = myws.pdf(pdfName.c_str())->fitTo(*myws.data(dsName.c_str()), Extended(kTRUE), SumW2Error(isWeighted), Range(cutSideBand ? parIni["BkgMassRange_FULL_Label"].c_str() : "MassWindow"), ExternalConstraints(RooArgSet(*(myws.pdf("sigmaAlphaConstr")),*(myws.pdf("sigmaNConstr")),*(myws.pdf("sigmaRSigmaConstr")))), NumCPU(numCores), Save());
}
else {
cout << "[INFO] Constrained variables: alpha, n, ratio of sigmas" << endl;
fitResult = myws.pdf(pdfName.c_str())->fitTo(*myws.data(dsName.c_str()), Extended(kTRUE), SumW2Error(isWeighted), Range(cutSideBand ? parIni["BkgMassRange_FULL_Label"].c_str() : "MassWindow"), ExternalConstraints(RooArgSet(*(myws.pdf("sigmaAlphaConstr")),*(myws.pdf("sigmaNConstr")))), NumCPU(numCores), Save());
}
}
else
{
fitResult = myws.pdf(pdfName.c_str())->fitTo(*myws.data(dsName.c_str()), Extended(kTRUE), SumW2Error(isWeighted), Range(cutSideBand ? parIni["BkgMassRange_FULL_Label"].c_str() : "MassWindow"), NumCPU(numCores), Save());
}
fitResult->Print("v");
myws.import(*fitResult, Form("fitResult_%s", pdfName.c_str()));
// Create the output files
int nBins = min(int( round((cut.dMuon.M.Max - cut.dMuon.M.Min)/binWidth) ), 1000);
drawMassPlot(myws, outputDir, opt, cut, parIni, plotLabel, DSTAG, isPbPb, incJpsi, incPsi2S, incBkg, cutCtau, doSimulFit, wantPureSMC, setLogScale, incSS, zoomPsi, nBins, getMeanPT);
// Save the results
string FileName = ""; setMassFileName(FileName, outputDir, DSTAG, plotLabel, cut, isPbPb, cutSideBand);
myws.saveSnapshot(Form("%s_parFit", pdfName.c_str()), *newpars, kTRUE);
saveWorkSpace(myws, Form("%smass%s/%s/result", outputDir.c_str(), (cutSideBand?"SB":""), DSTAG.c_str()), FileName);
}
}
return true;
};
GpgME::Import GpgME::ImportResult::import( unsigned int idx ) const {
return Import( d, idx );
}
RoughSpeed &operator=(fixed other) {
value = Import(other);
return *this;
}
TranscodeDialog::TranscodeDialog(QWidget* parent)
: QDialog(parent),
ui_(new Ui_TranscodeDialog),
log_ui_(new Ui_TranscodeLogDialog),
log_dialog_(new QDialog(this)),
transcoder_(new Transcoder(this)),
queued_(0),
finished_success_(0),
finished_failed_(0) {
ui_->setupUi(this);
ui_->files->header()->setResizeMode(QHeaderView::ResizeToContents);
log_ui_->setupUi(log_dialog_);
QPushButton* clear_button =
log_ui_->buttonBox->addButton(tr("Clear"), QDialogButtonBox::ResetRole);
connect(clear_button, SIGNAL(clicked()), log_ui_->log, SLOT(clear()));
// Get presets
QList<TranscoderPreset> presets = Transcoder::GetAllPresets();
qSort(presets.begin(), presets.end(), ComparePresetsByName);
for (const TranscoderPreset& preset : presets) {
ui_->format->addItem(
QString("%1 (.%2)").arg(preset.name_, preset.extension_),
QVariant::fromValue(preset));
}
// Load settings
QSettings s;
s.beginGroup(kSettingsGroup);
last_add_dir_ = s.value("last_add_dir", QDir::homePath()).toString();
last_import_dir_ = s.value("last_import_dir", QDir::homePath()).toString();
QString last_output_format = s.value("last_output_format", "ogg").toString();
for (int i = 0; i < ui_->format->count(); ++i) {
if (last_output_format ==
ui_->format->itemData(i).value<TranscoderPreset>().extension_) {
ui_->format->setCurrentIndex(i);
break;
}
}
// Add a start button
start_button_ = ui_->button_box->addButton(tr("Start transcoding"),
QDialogButtonBox::ActionRole);
cancel_button_ = ui_->button_box->button(QDialogButtonBox::Cancel);
close_button_ = ui_->button_box->button(QDialogButtonBox::Close);
close_button_->setShortcut(QKeySequence::Close);
// Hide elements
cancel_button_->hide();
ui_->progress_group->hide();
// Connect stuff
connect(ui_->add, SIGNAL(clicked()), SLOT(Add()));
connect(ui_->import, SIGNAL(clicked()), SLOT(Import()));
connect(ui_->remove, SIGNAL(clicked()), SLOT(Remove()));
connect(start_button_, SIGNAL(clicked()), SLOT(Start()));
connect(cancel_button_, SIGNAL(clicked()), SLOT(Cancel()));
connect(close_button_, SIGNAL(clicked()), SLOT(hide()));
connect(ui_->details, SIGNAL(clicked()), log_dialog_, SLOT(show()));
connect(ui_->options, SIGNAL(clicked()), SLOT(Options()));
connect(ui_->select, SIGNAL(clicked()), SLOT(AddDestination()));
connect(transcoder_, SIGNAL(JobComplete(QString, bool)),
SLOT(JobComplete(QString, bool)));
connect(transcoder_, SIGNAL(LogLine(QString)), SLOT(LogLine(QString)));
connect(transcoder_, SIGNAL(AllJobsComplete()), SLOT(AllJobsComplete()));
}
constexpr
RoughVSpeed(fixed _value):value(Import(_value)) {}
RoughSpeed(fixed _value):value(Import(_value)) {}
void SetValue(unsigned _value) {
value = Import(_value);
}
void SetValue(int _value) {
value = Import(_value);
}
/**
* Updates the time stamp, setting it to the current clock. This
* marks the referenced value as "valid".
*
* @param now the current time stamp in seconds
*/
void Update(fixed now) {
last = Import(now);
}
AngleDataField(Angle _value, unsigned _step, bool _fine,
DataFieldListener *listener=nullptr)
:DataField(Type::ANGLE, true, listener),
value(Import(_value)), step(_step), fine(_fine) {}
/**
* Initialize the object with the specified timestamp.
*/
explicit Validity(fixed _last):last(Import(_last)) {}
IntrusiveRefCntPtr<Module> Parser::module()
{
mod = new Module;
expect(TModule);
expectPeek(TTypeIdent);
mod->name = nextIdent();
expect(TLParen);
if(token != TRParen)
{
do
{
if(token != TIdent && token != TTypeIdent)
throw CompileError(CEUnexpectedToken, -1);
string const& name = nextIdent();
mod->exportedSymbols.push_back(name);
}
while(test(TComma));
}
expect(TRParen, true);
do
{
if(test(TImport))
{
expectPeek(TTypeIdent);
string const& name = nextIdent(true);
mod->imports.push_back(Import(name));
}
else if(token != TSemicolon) // TODO: Make into set
{
break;
}
}
while(test(TSemicolon));
do
{
if(token == TTypeIdent)
{
structBody();
}
else if(token == TIdent)
{
enterTypeScope();
funcDef(true);
exitTypeScope();
}
else if(test(TClass))
{
expectPeek(TTypeIdent);
string const& name = nextIdent(false);
IntrusiveRefCntPtr<Class> def(new Class(name));
enterTypeScope();
typeParamList(def->typeParams, false);
expect(TLBrace);
do
{
if (token == TIdent)
{
funcDef(false);
}
}
while (test(TSemicolon));
expect(TRBrace, true);
exitTypeScope();
mod->classDefs[def->name] = def;
}
}
while(test(TSemicolon));
expect(TEof);
return mod;
}
int QModelMS3D::Load(char *strFileName)
{
FILE* pFile;
MS3D_HEADER MS3DHeader;
if((pFile= fopen(strFileName, "rb"))==NULL)
{
// S3Dlog.Output("Could not load %s correctly", filename);
return false;
}
// Leer cabecera
fread(&MS3DHeader.ID, sizeof(char), 10, pFile);
fread(&MS3DHeader.Version, 1, sizeof(int), pFile);
// Comprobacion de version
if(strncmp(MS3DHeader.ID, "MS3D000000", 10)!=0)
{
// S3Dlog.Output("%s if not a valid .ms3d", filename);
return false;
}
if(MS3DHeader.Version!=3 && MS3DHeader.Version!=4)
{
// S3Dlog.Output("%s if not a valid .ms3d", filename);
return false;
}
// Leer Vertices
fread(&m_NumVertex, sizeof(unsigned short), 1, pFile);
m_pVertex = new MS3D_VERTEX [m_NumVertex];
for(int i=0; i<m_NumVertex; i++)
{
fread(&m_pVertex[i].Flags, sizeof(BYTE), 1, pFile);
fread( m_pVertex[i].Vertex, sizeof(float), 3, pFile);
fread(&m_pVertex[i].BoneID, sizeof(char), 1, pFile);
fread(&m_pVertex[i].RefCount, sizeof(BYTE), 1, pFile);
}
// Leer Triangulos
fread(&m_NumTriangles, sizeof(unsigned short), 1, pFile);
m_pTriangles= new MS3D_TRIANGLE [m_NumTriangles];
for(i=0; i<m_NumTriangles; i++)
{
fread(&m_pTriangles[i].Flags, sizeof(unsigned short), 1, pFile);
fread( m_pTriangles[i].VertexIndices, sizeof(unsigned short), 3, pFile);
fread( m_pTriangles[i].VertexNormals[0],sizeof(float), 3, pFile);
fread( m_pTriangles[i].VertexNormals[1],sizeof(float), 3, pFile);
fread( m_pTriangles[i].VertexNormals[2],sizeof(float), 3, pFile);
fread( m_pTriangles[i].u, sizeof(float), 3, pFile);
fread( m_pTriangles[i].v, sizeof(float), 3, pFile);
fread(&m_pTriangles[i].SmoothingGroup, sizeof(unsigned char), 1, pFile);
fread(&m_pTriangles[i].GroupIndex, sizeof(unsigned char), 1, pFile);
}
// Leer Grupos
fread(&m_NumGroups, sizeof(unsigned short), 1, pFile);
m_pGroups= new MS3D_GROUP [m_NumGroups];
for(i=0; i<m_NumGroups; i++)
{
fread(&m_pGroups[i].Flags, sizeof(unsigned char), 1, pFile);
fread( m_pGroups[i].Name, sizeof(char), 32, pFile);
fread(&m_pGroups[i].NumTriangles,sizeof(unsigned short),1, pFile);
m_pGroups[i].pTriangleIndices=new unsigned short [m_pGroups[i].NumTriangles];
fread( m_pGroups[i].pTriangleIndices, sizeof(unsigned short), m_pGroups[i].NumTriangles,pFile);
fread(&m_pGroups[i].MaterialIndex, sizeof(char), 1, pFile);
}
// S3Dlog.Output("Loaded %s correctly", filename);
Import();
return true;
}
RoughAngle(Angle _value):value(Import(_value)) {}
void SetValue(Angle _value) {
value = Import(_value);
}
RoughAngle &operator=(Angle other) {
value = Import(other);
return *this;
}
void fitEfficiency(float thres,
float mLow=45, float mHigh=70,
TString cutdef="pt_HLT>=20", TString cut_choice="HLT",
TString dirIn="/data_CMS/cms/ndaci/ndaci_2012/HTauTau/TriggerStudy/SingleMu/MuMu/Run2012A_PRV1/Pairs/",
TString dirResults="/home//llr/cms/ndaci/SKWork/macro/HTauTau/results/TriggerStudies/MuMu/Run2012A_PRV1/",
TString lumi="200 pb", int nCPU=4,
int color1=kBlack, int style1=kFullCircle, int color2=kRed, int style2=kOpenSquare,
TString fileIn="*.root", TString image="eff_HLT_MuTau")
{
// STYLE //
gROOT->Reset();
loadPresentationStyle();
gROOT->ForceStyle();
// OUTPUT //
TString name_image = dirResults+"/"+image;
ofstream fichier(name_image+".txt", ios::out);
// BINNING //
const int nbinsEB = 14;
Double_t binsEB[nbinsEB] = {10., 14., 18., 20., 22., 26., 30., 40., 50., 60., 70., 80, 90, 100};
RooBinning binningEB = RooBinning(nbinsEB-1, binsEB, "binningEB");
const int nbinsEE = 14;
Double_t binsEE[nbinsEE] = {10., 14., 18., 20., 22., 26., 30., 40., 50., 60., 70., 80, 90, 100};
RooBinning binningEE = RooBinning(nbinsEE-1, binsEE, "binningEE");
// EB/EE eta cuts //
TString etacutEB="eta>-1.479 && eta<1.479", etacutEE="eta<=-1.479 || eta>=1.479";
TString cutdefEB, cutdefEE;
if(cutdef=="") {
cutdefEB=etacutEB;
cutdefEE=etacutEE;
}
else {
cutdefEB=cutdef+" && "+etacutEB ;
cutdefEB=cutdef+" && "+etacutEE ;
}
// INPUT DATA //
TChain* treeTnP = new TChain("treeTnP");
treeTnP->Add(dirIn+"/"+fileIn);
RooRealVar xaxis("pt","P_{T} [GeV]",0,150) ;
RooRealVar mass("mass","mass",mLow,mHigh) ;// consider only this mass range when importing data
RooRealVar eta("eta","eta",-3., 3) ;
RooRealVar weight("weight","weight",-1,1000) ;
RooRealVar pt_HLT_tag("pt_HLT_tag","P_{T} [GeV]",0,150) ;
RooRealVar pt_HLT_tag_sanity("pt_HLT_tag_sanity","P_{T} [GeV]",0,150) ;
RooRealVar pt_L3("pt_L3","P_{T} [GeV]",0,150) ;
RooRealVar pt_L25("pt_L25","P_{T} [GeV]",0,150) ;
RooRealVar pt_L2("pt_L2","P_{T} [GeV]",0,150) ;
RooRealVar et_L1jet("et_L1_jet","P_{T} [GeV]",0,150) ;
RooRealVar et_L1tau("et_L1_tau","P_{T} [GeV]",0,150) ;
// DEFINE EFFICIENCY CUT //
RooCategory cutHLT("match","") ;
cutHLT.defineType("accept",1) ;
cutHLT.defineType("reject",0) ;
RooCategory cutL1("L1match","") ;
cutL1.defineType("accept",1) ;
cutL1.defineType("reject",0) ;
RooCategory cutL1L2("L1L2match","") ;
cutL1L2.defineType("accept",1) ;
cutL1L2.defineType("reject",0) ;
RooCategory cutL1L2L25("L1L2L25match","") ;
cutL1L2L25.defineType("accept",1) ;
cutL1L2L25.defineType("reject",0) ;
RooCategory cutL1L2L25L3("L1L2L25L3match","") ;
cutL1L2L25L3.defineType("accept",1) ;
cutL1L2L25L3.defineType("reject",0) ;
RooCategory *cut;
if(cut_choice=="HLT") cut = &cutHLT;
if(cut_choice=="L1") cut = &cutL1;
if(cut_choice=="L1L2") cut = &cutL1L2;
if(cut_choice=="L1L2L25") cut = &cutL1L2L25;
if(cut_choice=="L1L2L25L3") cut = &cutL1L2L25L3;
RooDataSet dataSetEB("data","data from tree",
RooArgSet(xaxis, *cut,
pt_HLT_tag, pt_L3, pt_L25, pt_L2,
mass, weight, eta),
WeightVar(weight), Import(*treeTnP), Cut(cutdefEB) );
RooDataSet dataSetEE("data","data from tree",
RooArgSet(xaxis, *cut,
pt_HLT_tag, pt_L3, pt_L25, pt_L2,
mass, weight, eta),
WeightVar(weight), Import(*treeTnP), Cut(cutdefEE) );
dataSetEB.Print();
dataSetEE.Print();
// PLOT //
RooPlot* frame = xaxis.frame(Bins(18000),Title("Fitted efficiency")) ;
dataSetEB.plotOn(frame, Binning(binningEB), Efficiency(*cut), MarkerColor(color1), LineColor(color1), MarkerStyle(style1) );
dataSetEE.plotOn(frame, Binning(binningEE), Efficiency(*cut), MarkerColor(color2), LineColor(color2), MarkerStyle(style2) );
// PARAMETRES ROOFIT CRYSTAL BALL //
RooRealVar norm("norm","N",0.95,0.6,1);
RooRealVar alpha("alpha","#alpha",0.2,0.01,8);
RooRealVar n("n","n",2,1.1,35);
RooRealVar mean("mean","mean",10,5,30);
mean.setVal(thres);
RooRealVar sigma("sigma","#sigma",0.23,0.01,5);
RooRealVar pedestal("pedestal","pedestal",0.01,0,0.4);
FuncCB cb_EB("cb_EB","Fit function EB (cb)",xaxis,mean,sigma,alpha,n,norm) ;
FuncCB cb_EE("cb_EE","Fit function EE (cb)",xaxis,mean,sigma,alpha,n,norm) ;
RooEfficiency eff_EB("eff_EB","efficiency EB", cb_EB, *cut, "accept");
RooEfficiency eff_EE("eff_EE","efficiency EE", cb_EE, *cut, "accept");
// FIT //
double fit_cuts_min = thres-1.5 ;
double fit_cuts_max = 150;
xaxis.setRange("interesting",fit_cuts_min,fit_cuts_max);
fichier << "Fit characteristics :" << endl
<< "Threshold : " << thres << endl
<< "Fit Range : [" << fit_cuts_min << "," << fit_cuts_max << "]" << endl
<< endl << endl;
RooFitResult* roofitres_EB = new RooFitResult("roofitres_EB","roofitres_EB");
RooFitResult* roofitres_EE = new RooFitResult("roofitres_EE","roofitres_EE");
// Fit #1 //
roofitres_EB = eff_EB.fitTo(dataSetEB,ConditionalObservables(xaxis),Range("interesting"),Minos(kTRUE),Warnings(kFALSE),NumCPU(nCPU),Save(kTRUE),SumW2Error(kTRUE));
cb_EB.plotOn(frame,LineColor(color1),LineWidth(2));
fichier << "<----------------- EB ----------------->" << endl
<< "double res_mean=" << mean.getVal() << "; "
<< "double res_sigma=" << sigma.getVal() << "; "
<< "double res_alpha=" << alpha.getVal() << "; "
<< "double res_n=" << n.getVal() << "; "
<< "double res_norm=" << norm.getVal() << "; "
<< endl
<< "double err_mean=" << mean.getError() << "; "
<< "double err_sigma=" << sigma.getError() << "; "
<< "double err_alpha=" << alpha.getError() << "; "
<< "double err_n=" << n.getError() << "; "
<< "double err_norm=" << norm.getErrorLo()<< "; "
<< endl;
// Fit #2 //
roofitres_EE = eff_EE.fitTo(dataSetEE,ConditionalObservables(xaxis),Range("interesting"),Minos(kTRUE),Warnings(kFALSE),NumCPU(nCPU),Save(kTRUE),SumW2Error(kTRUE));
cb_EE.plotOn(frame,LineColor(color2),LineWidth(2));
fichier << "<----------------- EE ----------------->" << endl
<< "double res_mean=" << mean.getVal() << "; "
<< "double res_sigma=" << sigma.getVal() << "; "
<< "double res_alpha=" << alpha.getVal() << "; "
<< "double res_n=" << n.getVal() << "; "
<< "double res_norm=" << norm.getVal() << "; "
<< endl
<< "double err_mean=" << mean.getError() << "; "
<< "double err_sigma=" << sigma.getError() << "; "
<< "double err_alpha=" << alpha.getError() << "; "
<< "double err_n=" << n.getError() << "; "
<< "double err_norm=" << norm.getErrorLo()<< "; "
<< endl;
//////////////////////////// DRAWING PLOTS AND LEGENDS /////////////////////////////////
TCanvas* ca = new TCanvas("ca","Trigger Efficiency") ;
ca->SetGridx();
ca->SetGridy();
ca->cd();
//gPad->SetLogx();
gPad->SetObjectStat(1);
frame->GetYaxis()->SetRangeUser(0,1.05);
frame->GetXaxis()->SetRangeUser(1,150.);
frame->GetYaxis()->SetTitle("Efficiency");
frame->GetXaxis()->SetTitle("E_{T} [GeV]");
frame->Draw() ;
TH1F *SCeta_EB = new TH1F("SCeta_EB","SCeta_EB",50,-2.5,2.5);
TH1F *SCeta_EE = new TH1F("SCeta_EE","SCeta_EE",50,-2.5,2.5);
SCeta_EB->SetLineColor(color1) ;
SCeta_EB->SetMarkerColor(color1);
SCeta_EB->SetMarkerStyle(style1);
SCeta_EE->SetLineColor(color2) ;
SCeta_EE->SetMarkerColor(color2);
SCeta_EE->SetMarkerStyle(style2);
TLegend *leg = new TLegend(0.40, 0.14, 0.63, 0.34, NULL, "brNDC");
leg->SetLineColor(1);
leg->SetTextColor(1);
leg->SetTextFont(42);
leg->SetTextSize(0.0244755);
leg->SetShadowColor(kWhite);
leg->SetFillColor(kWhite);
leg->AddEntry("NULL","e #tau electrons efficiency","h");
// entry->SetLineColor(1);
// entry->SetLineStyle(1);
// entry->SetLineWidth(1);
// entry->SetMarkerColor(1);
// entry->SetMarkerStyle(21);
// entry->SetMarkerSize(1);
// entry->SetTextFont(62);
leg->AddEntry(SCeta_EB,"Barrel","p");
leg->AddEntry(SCeta_EE,"Endcaps","p");
leg->Draw();
ostringstream ossi("");
ossi << thres;
TString tossi = ossi.str();
leg = new TLegend(0.40, 0.30, 0.50, 0.50, NULL, "brNDC");
leg->SetBorderSize(0);
leg->SetTextFont(62);
leg->SetTextSize(0.0297203);
leg->SetLineColor(0);
leg->SetLineStyle(1);
leg->SetLineWidth(1);
leg->SetFillColor(0);
leg->SetFillStyle(0);
leg->AddEntry("NULL","CMS Preliminary 2012 pp #sqrt{s}=8 TeV","h");
leg->AddEntry("NULL","#int L dt = "+lumi+"^{-1}","h");
leg->AddEntry("NULL","Threshold : "+tossi+" GeV","h");
leg->Draw();
ca->Print(name_image+".C","C");
ca->Print(name_image+".cxx","cxx");
ca->Print(name_image+".png","png");
ca->Print(name_image+".gif","gif");
ca->Print(name_image+".pdf","pdf");
ca->Print(name_image+".ps","ps");
/////////////////////////////
// SAVE THE ROO FIT RESULT //
/////////////////////////////
RooWorkspace *w = new RooWorkspace("workspace","workspace") ;
w->import(dataSetEB);
w->import(dataSetEE);
w->import(*roofitres_EB,"roofitres_EB");
w->import(*roofitres_EE,"roofitres_EE");
cout << "CREATES WORKSPACE : " << endl;
w->Print();
w->writeToFile(name_image+"_fitres.root") ;
//gDirectory->Add(w) ;
// DELETE POINTERS
// int a=0;
// cin >> a;
// delete treeTnP; delete cut; delete frame; delete roofitres_EB; delete roofitres_EE; delete ca; delete SCeta_EB; delete SCeta_EE; delete leg; delete w;
}
