void ScanCode(u32 pc,CodeRegion* to)
{
to->start=pc;
InitPipeline();
bool stop=false;
u32 op_count=0;
u32 SOM;
while(stop==false)
{
op_count++;
u32 opcode=IReadMem16(pc);
StepPipeline(opcode);
if (Scanner_FindSOM(opcode,pc,&SOM))
{
//log("Scanner : SOM %d\n",SOM);
pc+=SOM+2;
op_count+=SOM>>1;
known_pl_cycles+=SOM>>1;
}
else
{
bool FRenderD3D11::Initialize(HWND hWindow)
{
// create a struct to hold information about the swap chain
DXGI_SWAP_CHAIN_DESC scd;
// clear out the struct for use
ZeroMemory(&scd, sizeof(DXGI_SWAP_CHAIN_DESC));
// fill the swap chain description struct
scd.BufferCount = 1; // one back buffer
scd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // use 32-bit color
scd.BufferDesc.Width = FTL::WINDOW_DEFAULT_ROW_SIZE; // set the back buffer width
scd.BufferDesc.Height = FTL::WINDOW_DEFAULT_COL_SIZE; // set the back buffer height
scd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; // how swap chain is to be used
scd.OutputWindow = hWindow; // the window to be used
scd.SampleDesc.Count = 4; // how many multisamples
scd.Windowed = TRUE; // windowed/full-screen mode
scd.Flags = DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH; // allow full-screen switching
// create a device, device context and swap chain using the information in the scd struct
D3D11CreateDeviceAndSwapChain(NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
NULL,
NULL,
NULL,
D3D11_SDK_VERSION,
&scd,
&m_pSwapchain,
&m_pDevice,
NULL,
&m_pDeviceContext);
// get the address of the back buffer
ID3D11Texture2D *pBackBuffer;
m_pSwapchain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&pBackBuffer);
// use the back buffer address to create the render target
m_pDevice->CreateRenderTargetView(pBackBuffer, NULL, &m_pBackbuffer);
pBackBuffer->Release();
// set the render target as the back buffer
m_pDeviceContext->OMSetRenderTargets(1, &m_pBackbuffer, NULL);
// Set the viewport
D3D11_VIEWPORT viewport;
ZeroMemory(&viewport, sizeof(D3D11_VIEWPORT));
viewport.TopLeftX = 0;
viewport.TopLeftY = 0;
viewport.Width = FTL::WINDOW_DEFAULT_ROW_SIZE;
viewport.Height = FTL::WINDOW_DEFAULT_COL_SIZE;
m_pDeviceContext->RSSetViewports(1, &viewport);
InitPipeline();
InitGraphics();
return true;
}
//======================================================================
//======================================================================
bool NvUIGraphicFrameRenderVK::StaticInit()
{
//NvUIGraphicRenderVK::StaticInit();
if (!ms_staticCount)
{
ms_shader.Load();
VkPipelineColorBlendAttachmentState colorStateBlend = { VK_STRUCTURE_TYPE_PIPELINE_COLOR_BLEND_STATE_CREATE_INFO };
colorStateBlend.colorWriteMask = ~0;
colorStateBlend.blendEnable = VK_TRUE;
colorStateBlend.alphaBlendOp = VK_BLEND_OP_ADD;
colorStateBlend.colorBlendOp = VK_BLEND_OP_ADD;
colorStateBlend.srcAlphaBlendFactor = VK_BLEND_FACTOR_SRC_ALPHA;
colorStateBlend.dstAlphaBlendFactor = VK_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA;
colorStateBlend.srcColorBlendFactor = VK_BLEND_FACTOR_SRC_ALPHA;
colorStateBlend.dstColorBlendFactor = VK_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA;
VkPipelineColorBlendStateCreateInfo colorInfoBlend = { VK_STRUCTURE_TYPE_PIPELINE_COLOR_BLEND_STATE_CREATE_INFO };
colorInfoBlend.logicOpEnable = VK_FALSE;
colorInfoBlend.attachmentCount = 1;
colorInfoBlend.pAttachments = &colorStateBlend;
colorInfoBlend.blendConstants[0] = 1.0f;
colorInfoBlend.blendConstants[1] = 1.0f;
colorInfoBlend.blendConstants[2] = 1.0f;
colorInfoBlend.blendConstants[3] = 1.0f;
InitPipeline(ms_shader.mStageCount,
ms_shader.mStages, &colorInfoBlend,
&ms_pipelineAlpha);
colorStateBlend.blendEnable = VK_FALSE;
InitPipeline(ms_shader.mStageCount,
ms_shader.mStages, &colorInfoBlend,
&ms_pipelineOpaque);
}
ms_staticCount++;
return true;
}
void InitD3D( HWND hWnd, SFLOAT width, SFLOAT height ){
//initializing swap chain
DXGI_SWAP_CHAIN_DESC swapChainDesc;
ZeroMemory( &swapChainDesc, sizeof( DXGI_SWAP_CHAIN_DESC ) );
swapChainDesc.BufferCount = 1; // number of back buffers
swapChainDesc.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; //unsigned normalized values
swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; // draw graphics into back buffer
swapChainDesc.OutputWindow = hWnd; // window to output to
swapChainDesc.SampleDesc.Count = 4; // anti-aliasing that is done on the images
swapChainDesc.Windowed = TRUE;
D3D_FEATURE_LEVEL featureLevels[] =
{
//D3D_FEATURE_LEVEL_11_0
D3D_FEATURE_LEVEL_10_1,
//D3D_FEATURE_LEVEL_10_0,
};
HRESULT hr = D3D11CreateDeviceAndSwapChain(
NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
0, //flags for singlethreading/multithreading etc. stuff
featureLevels,
1,
D3D11_SDK_VERSION,
&swapChainDesc,
&gSwapChain,
&gDevice,
NULL,
&gDeviceContext
);
//setting the render target to the back buffer
//get address of back buffer into renderTargetLocation
ID3D11Texture2D *renderTargetAddress;
gSwapChain->GetBuffer( 0, __uuidof( ID3D11Texture2D ), (LPVOID*)&renderTargetAddress );
//using the back buffer address to create the render target
gDevice->CreateRenderTargetView( renderTargetAddress, NULL, &gRenderTargetView );
renderTargetAddress->Release();
//set render target as the back buffer
gDeviceContext->OMSetRenderTargets( 1, &gRenderTargetView, NULL );
InitViewport( width, height );
//InitRasterizer();
InitGraphics( width, height );
InitPipeline();
}
// this function initializes and prepares Direct3D for use
void InitD3D(HWND hWnd)
{
// create a struct to hold information about the swap chain
DXGI_SWAP_CHAIN_DESC scd;
// clear out the struct for use
ZeroMemory(&scd, sizeof(DXGI_SWAP_CHAIN_DESC));
// fill the swap chain description struct
scd.BufferCount = 1; // one back buffer
scd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // use 32-bit color
scd.BufferDesc.Width = SCREEN_WIDTH; // set the back buffer width
scd.BufferDesc.Height = SCREEN_HEIGHT; // set the back buffer height
scd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; // how swap chain is to be used
scd.OutputWindow = hWnd; // the window to be used
scd.SampleDesc.Count = 4; // how many multisamples
scd.Windowed = TRUE; // windowed/full-screen mode
scd.Flags = DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH; // allow full-screen switching
// create a device, device context and swap chain using the information in the scd struct
D3D11CreateDeviceAndSwapChain(NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
NULL,
NULL,
NULL,
D3D11_SDK_VERSION,
&scd,
&swapchain,
&dev,
NULL,
&devcon);
// create the depth buffer texture
D3D11_TEXTURE2D_DESC texd;
ZeroMemory(&texd, sizeof(texd));
texd.Width = SCREEN_WIDTH;
texd.Height = SCREEN_HEIGHT;
texd.ArraySize = 1;
texd.MipLevels = 1;
texd.SampleDesc.Count = 4;
texd.Format = DXGI_FORMAT_D32_FLOAT;
texd.BindFlags = D3D11_BIND_DEPTH_STENCIL;
ID3D11Texture2D *pDepthBuffer;
dev->CreateTexture2D(&texd, NULL, &pDepthBuffer);
// create the depth buffer
D3D11_DEPTH_STENCIL_VIEW_DESC dsvd;
ZeroMemory(&dsvd, sizeof(dsvd));
dsvd.Format = DXGI_FORMAT_D32_FLOAT;
dsvd.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2DMS;
dev->CreateDepthStencilView(pDepthBuffer, &dsvd, &zbuffer);
pDepthBuffer->Release();
// get the address of the back buffer
ID3D11Texture2D *pBackBuffer;
swapchain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&pBackBuffer);
// use the back buffer address to create the render target
dev->CreateRenderTargetView(pBackBuffer, NULL, &backbuffer);
pBackBuffer->Release();
// set the render target as the back buffer
devcon->OMSetRenderTargets(1, &backbuffer, zbuffer);
// Set the viewport
D3D11_VIEWPORT viewport;
ZeroMemory(&viewport, sizeof(D3D11_VIEWPORT));
viewport.TopLeftX = 0; // set the left to 0
viewport.TopLeftY = 0; // set the top to 0
viewport.Width = SCREEN_WIDTH; // set the width to the window's width
viewport.Height = SCREEN_HEIGHT; // set the height to the window's height
viewport.MinDepth = 0; // the closest an object can be on the depth buffer is 0.0
viewport.MaxDepth = 1; // the farthest an object can be on the depth buffer is 1.0
devcon->RSSetViewports(1, &viewport);
InitPipeline();
InitGraphics();
InitStates();
}
// this function initializes and prepares Direct3D for use
void Game::Initialize()
{
// Define temporary pointers to a device and a device context
ComPtr<ID3D11Device> dev11;
ComPtr<ID3D11DeviceContext> devcon11;
// Create the device and device context objects
D3D11CreateDevice(
nullptr,
D3D_DRIVER_TYPE_HARDWARE,
nullptr,
0,
nullptr,
0,
D3D11_SDK_VERSION,
&dev11,
nullptr,
&devcon11);
// Convert the pointers from the DirectX 11 versions to the DirectX 11.1 versions
dev11.As(&dev);
devcon11.As(&devcon);
// obtain the DXGI factory
ComPtr<IDXGIDevice1> dxgiDevice;
dev.As(&dxgiDevice);
ComPtr<IDXGIAdapter> dxgiAdapter;
dxgiDevice->GetAdapter(&dxgiAdapter);
ComPtr<IDXGIFactory2> dxgiFactory;
dxgiAdapter->GetParent(__uuidof(IDXGIFactory2), &dxgiFactory);
// set up the swap chain description
DXGI_SWAP_CHAIN_DESC1 scd = { 0 };
scd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; // how the swap chain should be used
scd.BufferCount = 2; // a front buffer and a back buffer
scd.Format = DXGI_FORMAT_B8G8R8A8_UNORM; // the most common swap chain format
scd.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // the recommended flip mode
scd.SampleDesc.Count = 1; // disable anti-aliasing
CoreWindow^ Window = CoreWindow::GetForCurrentThread(); // get the window pointer
// create the swap chain
dxgiFactory->CreateSwapChainForCoreWindow(
dev.Get(), // address of the device
reinterpret_cast<IUnknown*>(Window), // address of the window
&scd, // address of the swap chain description
nullptr, // advanced
&swapchain); // address of the new swap chain pointer
// get a pointer directly to the back buffer
ComPtr<ID3D11Texture2D> backbuffer;
swapchain->GetBuffer(0, __uuidof(ID3D11Texture2D), &backbuffer);
// create a render target pointing to the back buffer
dev->CreateRenderTargetView(backbuffer.Get(), nullptr, &rendertarget);
// set the viewport
D3D11_VIEWPORT viewport = { 0 };
viewport.TopLeftX = 0;
viewport.TopLeftY = 0;
viewport.Width = Window->Bounds.Width;
viewport.Height = Window->Bounds.Height;
devcon->RSSetViewports(1, &viewport);
// initialize graphics and the pipeline
InitGraphics();
InitPipeline();
}
//
// FUNCTION: GraphicsDeviceInterface::Initialize()
//
// PURPOSE: Initializes Direct3D
//
bool GraphicsDeviceInterface::Initialize(HWND hWnd, WindowSize* wind) {
HRESULT hResult;
// Clear the struct
ZeroMemory(&scd, sizeof(DXGI_SWAP_CHAIN_DESC));
// Set the swap chain values
scd.BufferCount = 1; // one back buffer
scd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // use 32 bit color
scd.BufferDesc.Width = wind->getWidth(); // set width using windowSize object
scd.BufferDesc.Height = wind->getHeight(); // set height using windowSize object
scd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; // swap chain is output
scd.OutputWindow = hWnd; // window to render into
scd.SampleDesc.Count = 4; // use 4 multisamples for antialiasing
scd.Windowed = wind->getWindowed(); // Sets windowed mode
scd.Flags = DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH; // Allow full-screen switching
// Create the device, context, and swap chain
hResult = D3D11CreateDeviceAndSwapChain(NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
NULL, //D3D_FEATURE_LEVEL_10_0,
NULL,
NULL,
D3D11_SDK_VERSION,
&scd,
&m_Swapchain,
&m_Device,
NULL,
&m_Context);
if (hResult != S_OK)
{
return FALSE;
}
// Retrieves the IDXGIFactory that created "m_Device"
IDXGIDevice *pDXGIDevice;
m_Device->QueryInterface(__uuidof(IDXGIDevice), (void **)&pDXGIDevice);
IDXGIAdapter *pDXGIAdapter;
pDXGIDevice->GetParent(__uuidof(IDXGIAdapter), (void **)&pDXGIAdapter);
IDXGIFactory *pDXGIFactory;
pDXGIAdapter->GetParent(__uuidof(IDXGIFactory), (void **)&pDXGIFactory);
// Disables the use of Alt-Enter to switch between fullscreen/windowed
pDXGIFactory->MakeWindowAssociation(hWnd, DXGI_MWA_NO_ALT_ENTER);
// Resized the target (window or screen resolution) and back buffers
m_Swapchain->ResizeTarget(&scd.BufferDesc);
m_Swapchain->ResizeBuffers(0, 0, 0, DXGI_FORMAT_UNKNOWN, scd.Flags);
// Get the back buffer address
ID3D11Texture1D *pBackBuffer;
m_Swapchain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&pBackBuffer);
// Use the back buffer address to create a render target
m_Device->CreateRenderTargetView(pBackBuffer, NULL, &m_BackBuffer);
pBackBuffer->Release();
D3D11_TEXTURE2D_DESC depthBufferDesc;
D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
D3D11_DEPTH_STENCIL_VIEW_DESC depthStencilViewDesc;
D3D11_RASTERIZER_DESC rasterDesc;
ZeroMemory(&depthBufferDesc, sizeof(depthBufferDesc));
depthBufferDesc.Width = wind->getWidth();
depthBufferDesc.Height = wind->getHeight();
depthBufferDesc.MipLevels = 1;
depthBufferDesc.ArraySize = 1;
depthBufferDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT;
depthBufferDesc.SampleDesc.Count = 4;
depthBufferDesc.SampleDesc.Quality = 0;
depthBufferDesc.Usage = D3D11_USAGE_DEFAULT;
depthBufferDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL;
depthBufferDesc.CPUAccessFlags = 0;
depthBufferDesc.MiscFlags = 0;
m_Device->CreateTexture2D(&depthBufferDesc, NULL, &m_DepthStencilBuffer);
// Initialize the description of the stencil state.
ZeroMemory(&depthStencilDesc, sizeof(depthStencilDesc));
// Set up the description of the stencil state.
depthStencilDesc.DepthEnable = true;
depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;
depthStencilDesc.DepthFunc = D3D11_COMPARISON_LESS;
depthStencilDesc.StencilEnable = true;
depthStencilDesc.StencilReadMask = 0xFF;
depthStencilDesc.StencilWriteMask = 0xFF;
// Stencil operations if pixel is front-facing.
depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_INCR;
depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
// Stencil operations if pixel is back-facing.
depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_DECR;
depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
m_Device->CreateDepthStencilState(&depthStencilDesc, &m_DepthStencilState);
m_Context->OMSetDepthStencilState(m_DepthStencilState, 1);
// Initailze the depth stencil view.
ZeroMemory(&depthStencilViewDesc, sizeof(depthStencilViewDesc));
// Set up the depth stencil view description.
depthStencilViewDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT;
depthStencilViewDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D;
depthStencilViewDesc.Texture2D.MipSlice = 0;
m_Device->CreateDepthStencilView(m_DepthStencilBuffer, NULL, &m_DepthStencilView);
// set the render target as the back buffer
m_Context->OMSetRenderTargets(1, &m_BackBuffer, m_DepthStencilView);
// Set the viewport using windowSize object
D3D11_VIEWPORT viewport;
ZeroMemory(&viewport, sizeof(D3D11_VIEWPORT));
viewport.TopLeftX = 0;
viewport.TopLeftY = 0;
viewport.MinDepth = 0.0f;
viewport.MaxDepth = 1.0f;
viewport.Width = (float)wind->getWidth();
viewport.Height = (float)wind->getHeight();
m_Context->RSSetViewports(1, &viewport);
// Setup the projection matrix.
float fieldOfView = (float)D3DX_PI / 4.0f;
float screenAspect = (float)wind->getWidth() / (float)wind->getHeight();
// TODO: Make constants for screen depth and screen near.
// Create the projection matrix for 3D rendering.
D3DXMatrixPerspectiveFovLH(&m_projMatrix, fieldOfView, screenAspect, 0.1f, 1000.0f);
InitPipeline();
InitGraphics();
return TRUE;
}
avtDataRequest_p
avtOriginatingSource::BalanceLoad(avtContract_p contract)
{
bool usesAllDomains =contract->GetDataRequest()->GetSIL().UsesAllDomains();
//
// If it shouldn't use load balancing, then it has to do with auxiliary
// data coming through our meta-data mechanism. Calling InitPipeline
// would change the data attributes and it also causes an unnecessary
// callback to our progress mechanism.
//
if (contract->ShouldUseLoadBalancing())
{
InitPipeline(contract);
}
else if (contract->DoingOnDemandStreaming())
{
GetOutput()->GetInfo().GetValidity().SetWhetherStreaming(true);
}
//
// Allow the load balancer to split the load across processors.
//
bool dataReplicationOccurred = false;
avtDataRequest_p rv = NULL;
if (!UseLoadBalancer())
{
debug5 << "This source should not load balance the data." << endl;
rv = contract->GetDataRequest();
}
else if (! contract->ShouldUseLoadBalancing())
{
debug5 << "This pipeline has indicated that no load balancing should "
<< "be used." << endl;
rv = contract->GetDataRequest();
}
else if (loadBalanceFunction != NULL)
{
debug5 << "Using load balancer to reduce data." << endl;
rv = loadBalanceFunction(loadBalanceFunctionArgs, contract);
dataReplicationOccurred =
contract->ReplicateSingleDomainOnAllProcessors();
}
else
{
debug1 << "No load balancer exists to reduce data." << endl;
rv = contract->GetDataRequest();
}
//
// Return the portion for this processor.
//
rv->SetUsesAllDomains(usesAllDomains);
//
// Tell the output if we are doing data replication.
//
if (dataReplicationOccurred)
GetOutput()->GetInfo().GetAttributes().SetDataIsReplicatedOnAllProcessors(true);
return rv;
}