void main(int argc, char *argv[])
{
MSG msg;
LARGE_INTEGER litmp;
SetProcessAffinityMask(GetCurrentProcess(), 1);
hInstance = GetModuleHandle(NULL);
pHeapList.CessionNum = 1;
pHeapList.HeapAlign = 0;
pHeapList.HeapBottom = DjyosHeap;
pHeapList.HeapTop = pHeapList.HeapBottom + sizeof(DjyosHeap);
pHeapList.PageSize = 128;
strcpy(pHeapList.name,"sys");
pHeapList.name[4] = '\0';
// a = CreateDirectory(_TEXT("djyfs"),NULL);
// a = CreateDirectory(_TEXT("djyfs\\sys"),NULL);
Heap_StaticModuleInit(0);
Int_Init();
QueryPerformanceFrequency(&litmp);
s64g_freq = litmp.QuadPart;
Int_IsrConnect(cn_int_line_switch_context,switch_context);
Int_SettoAsynSignal(cn_int_line_switch_context); //tick中断被设为异步信号
Int_RestoreAsynLine(cn_int_line_switch_context);
// printf("VC 编译器版本：%d\n\r",_MSC_VER);
Sys_Start();
// 主消息循环:
while (GetMessage(&msg, NULL, 0, 0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
return ;
}
void ScrSaver()
{
OutT_Init();
Int_Init();
Pic_Init();
Timer_Init();
OutT_SetAttr(13);
OutT("\nBon ok, c'est stupid de linker ça statiquement\nMais pour la beauté du test... :D\n");
OutT_SetAttr(11+128);
OutT("\n\n Bombela.\n");
OutT_Release();
}
int main( void )
{
/****************UART SET*******************/
*pPICR2 &= ~(0x1F); //Sets the UART0 receive interrupt to P12
*pPICR2 |= (0x13<<0);
initPLL_DDR2();
*pUART0LCR=0;
*pUART0IER = UARTRBFIE; // enables UART0 receive interrupt
/****************SYS INIT*******************/
initDPI();
initUART();
Init_LEDs();
Init_PushButtons();
sysreg_bit_clr(sysreg_MODE1, IRPTEN ); /* disable global interrupts */
/* unmask individual interrupts */
(*pDAI_IRPTL_PRI) = (SRU_EXTMISCA1_INT | SRU_EXTMISCA2_INT);
/* make sure interrupts latch on the rising edge */
(*pDAI_IRPTL_RE) = (SRU_EXTMISCA1_INT | SRU_EXTMISCA2_INT);
/* setup the IRQ pins to use the pushbuttons */
(*pSYSCTL) |= (IRQ1EN | IRQ2EN);
sysreg_bit_set(sysreg_MODE2, (IRQ1E | IRQ2E) );
/* enable IRQ interrupts and make DAI interrupts high priority */
sysreg_bit_set(sysreg_IMASK, (IRQ1I | IRQ2I | DAIHI) );
sysreg_bit_clr(sysreg_IMASKP, (IRQ1I | IRQ2I | DAIHI) );
sysreg_bit_set(sysreg_LIRPTL, P12IMSK );
sysreg_bit_clr(sysreg_LIRPTL, P12IMSKP );
sysreg_bit_clr(sysreg_IRPTL, (IRQ1I | IRQ2I) );
sysreg_bit_clr(sysreg_LIRPTL, P12I );
/* register the interrut handlers */
Int_Init();
Int_IsrConnect(cn_int_line_IRQ2I,SW9_IRQ2_handler);
Int_RestoreRealLine(cn_int_line_IRQ2I);
Int_IsrConnect(cn_int_line_IRQ1I,SW8_IRQ1_handler);
Int_RestoreAsynLine(cn_int_line_IRQ1I);
Int_IsrConnect(cn_int_line_DAII,__int_engine_dai);
Int_RestoreAsynLine(cn_int_line_DAII);
Int_IsrConnect(cn_int_line_P12I,UARTisr);
Int_RestoreAsynLine(cn_int_line_P12I);
Int_CutTrunk();
Int_ContactTrunk();
sysreg_bit_clr(sysreg_IRPTL, (IRQ1I | IRQ2I) );
NOP;NOP;
sysreg_bit_clr(sysreg_LIRPTL, P12I );
NOP;NOP;
sysreg_bit_set(sysreg_MODE1, NESTM ); /* enable interrupts nest */
sysreg_bit_set(sysreg_MODE1, IRPTEN ); /* enable global interrupts */
// 测试通过
// atom_high_test=Int_HighAtomStart();
// Int_HighAtomEnd(atom_high_test);
// atom_low_test=Int_LowAtomStart();
// Int_LowAtomEnd(atom_low_test);
// 测试通过
Int_TapLine(cn_int_line_IRQ2I);
// Int_TapLine(cn_int_line_DAII);
// Int_TapLine(cn_int_line_P12I);
Int_TapLine(cn_int_line_IRQ1I);
// 测试通过
// bool_value=Int_QueryLine(cn_int_line_IRQ2I);
// bool_value=Int_QueryLine(cn_int_line_IRQ1I);
// bool_value=Int_QueryLine(cn_int_line_DAII);
// bool_value=Int_QueryLine(cn_int_line_P12I);
// 测试通过
// Int_CutLine(cn_int_line_SFT3I);
// Int_CutLine(cn_int_line_P17I);
// Int_CutLine(cn_int_line_IRQ2I);
/****************UART TEST******************/
xmitUARTmessage(welcomemessage,sizeof(welcomemessage));
xmitUARTmessage("CYG Copyright \n\r",sizeof("CYG Copyright \n\r"));
while(1)
{
Blink_LED(10000000);
// Int_TapLine(cn_int_line_IRQ2I);
// xmitUARTmessage("CYG Copyright \n\r",sizeof("CYG Copyright \n\r"));
// Int_TapLine(cn_int_line_DAII);
}
/* Begin adding your custom code here */
return 0;
}
